CoChat

Toward Super-Tough Poly(l-lactide) via Constructing Pseudo-Cross-link Network in Toughening Phase Anchored by Stereocomplex Crystallites at the Interface

Yang, Dan-Dan, Liu, Wen, Zhu, Hong-Mei, Wu, Gang, Chen, Si-Chong, Wang, Xiu-Li, Wang, Yu-Zhong · 2018 · ACS Applied Materials & Interfaces

The DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.

Abstract

We demonstrated a novel strategy to toughen poly( l -lactide) (PLLA) by constructing pseudo-cross-link networks based on chain entanglements of long-chain branched structure in the toughening phase, which were anchored by stereocomplex (SC) crystallites at the interface. The formation of pseudo-cross-link network was achieved by simple blending of the copolymer of long-chain branched polycaprolactone and poly( d -lactide) (LB-PCL- b -DLA) with PLLA without introducing any chemical cross-linking structure or nonbiodegradable component. The microscopic morphology analysis suggests that the interface-formed SC crystallites not only enhanced the interfacial interaction between LB-PCL and PLLA but also obviously increased the matrix crystallization rate. Different from those blends without SC crystallites or long-chain branched structures, nano-microgels were observed in chloroform solution of the PLLA/LB-PCL- b -DLA blend, suggesting the formation of pseudo-cross-link network. The pseudo-cross-link network in LB-PCL toughening phase endows PLLA a significantly improved impact toughness (49.5 kJ/m 2 ), which is almost 13 times than that of neat PLLA. Moreover, matrix crystallinity and spherulite size of the PLLA matrix also play significant roles in toughening. Only sufficiently crystallized PLLA with proper spherulite size can effectively trigger the matrix shear yielding, meanwhile, facilitate the energy dissipating.

Overview

Integrity signals

Registry

Crossref · 10.1021/acsami.8b06343

Cites

54 of 54 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 54 references

Cited by

Metadata

Authors
Yang, D.-D., Liu, W., Zhu, H.-M., Wu, G., Chen, S.-C., Wang, X.-L., & Wang, Y.-Z.
Affiliations
  • National Engineering Laboratory of Eco-Friendly Polymeric Materials (Sichuan), State Key Laboratory of Polymer Materials Engineering, College of Chemistry, Sichuan University, Chengdu 610064, China
  • Sichuan University (CN)
Corresponding author
  • Chen, Si-Chong
  • Wang, Yu-Zhong
Venue
ACS Applied Materials & Interfaces
Published
2018-07-18
Volume
10
Issue
31
Pages
26594-26603
ISSN
  • 1944-8244 (ISSN-L)
  • 1944-8252
OpenAlex
W2884353472
Cited by
60
References
54
Citations by year
2026: 7 · 2025: 5 · 2024: 6 · 2023: 6 · 2022: 10 · 2021: 9 · 2020: 11 · 2019: 6
FWCI
2.11
Type
journal article
Language
en
Open access
closed
Locations
  • ACS Applied Materials & Interfaces (publishedVersion)
  • PubMed (publishedVersion)
Funders
  • Ministry of Science and Technology of the People's Republic of China (2016YFB0302102)
  • National Natural Science Foundation of China (51721091, 21474066)
Topics
  • Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
  • Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
  • Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
Keywords
poly(L-lactic acid), toughening, stereocomplex crystallites, poly(D-lactide), polymer blends, impact toughness, matrix crystallization, spherulite size, biodegradable polymers

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.