Toward Super-Tough Poly(l-lactide) via Constructing Pseudo-Cross-link Network in Toughening Phase Anchored by Stereocomplex Crystallites at the Interface
The DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
Abstract
We demonstrated a novel strategy to toughen poly( l -lactide) (PLLA) by constructing pseudo-cross-link networks based on chain entanglements of long-chain branched structure in the toughening phase, which were anchored by stereocomplex (SC) crystallites at the interface. The formation of pseudo-cross-link network was achieved by simple blending of the copolymer of long-chain branched polycaprolactone and poly( d -lactide) (LB-PCL- b -DLA) with PLLA without introducing any chemical cross-linking structure or nonbiodegradable component. The microscopic morphology analysis suggests that the interface-formed SC crystallites not only enhanced the interfacial interaction between LB-PCL and PLLA but also obviously increased the matrix crystallization rate. Different from those blends without SC crystallites or long-chain branched structures, nano-microgels were observed in chloroform solution of the PLLA/LB-PCL- b -DLA blend, suggesting the formation of pseudo-cross-link network. The pseudo-cross-link network in LB-PCL toughening phase endows PLLA a significantly improved impact toughness (49.5 kJ/m 2 ), which is almost 13 times than that of neat PLLA. Moreover, matrix crystallinity and spherulite size of the PLLA matrix also play significant roles in toughening. Only sufficiently crystallized PLLA with proper spherulite size can effectively trigger the matrix shear yielding, meanwhile, facilitate the energy dissipating.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“PLA properties such as the Tg, melting temperature (Tm),5,8,9 crystallinity,10,11 hydrophilicity,12 and ductility13,14 are reported to be improved using this approach.”
From Toughening Poly(l-lactide) Blends: Effectiveness of Sequence-Controlled Six-Arm Star-Branched Block Copolymers of Poly(l-lactide) and Poly(ε-caprolactone) (2022) · cites this paper as [14]
Citations
Cites
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Nagarajan, V., Mohanty, A. K., & Misra, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00321 · Cited by 926
Preparation and characterization of biodegradable PLA polymeric blends
Chen, C.-C., Chueh, J.-Y., Tseng, H., Huang, H.-M., & Lee, S.-Y. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00466-0 · Cited by 583
Super-tough poly(lactic acid) materials: Reactive blending with ethylene copolymer
Oyama, H. T. (2009) · Polymer · doi:10.1016/j.polymer.2008.12.025 · Cited by 393
Rubber toughening in polypropylene: A review
Liang, J. Z., & Li, R. K. Y. (2000) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(20000711)77:2<409::aid-app18>3.0.co;2-n · Cited by 388
Tsuji, H., Takai, H., & Saha, S. K. (2006) · Polymer · doi:10.1016/j.polymer.2006.03.074 · Cited by 353
Wei, X.-F., Bao, R.-Y., Cao, Z.-Q., Yang, W., Xie, B.-H., & Yang, M.-B. (2014) · Macromolecules · doi:10.1021/ma402653a · Cited by 324
Liu, H., Song, W., Chen, F., Guo, L., & Zhang, J. (2011) · Macromolecules · doi:10.1021/ma1026934 · Cited by 317
Branched polyesters: recent advances in synthesis and performance
McKee, M. G., Unal, S., Wilkes, G. L., & Long, T. E. (2005) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2005.01.009 · Cited by 316
Structure and properties of polylactide/natural rubber blends
Bitinis, N., Verdejo, R., Cassagnau, P., & Lopez-Manchado, M. A. (2011) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2011.05.016 · Cited by 274
Supertoughened Renewable PLA Reactive Multiphase Blends System: Phase Morphology and Performance
Zhang, K., Nagarajan, V., Misra, M., & Mohanty, A. K. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502337u · Cited by 267
Bai, H., Xiu, H., Gao, J., Deng, H., Zhang, Q., Yang, M., & Fu, Q. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201564f · Cited by 260
Progress in Toughening Poly(Lactic Acid) with Renewable Polymers
Wang, M., Wu, Y., Li, Y.-D., & Zeng, J.-B. (2017) · Polymer Reviews · doi:10.1080/15583724.2017.1287726 · Cited by 255
Tan, B. H., Muiruri, J. K., Li, Z., & He, C. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b01713 · Cited by 247
Ojijo, V., Sinha Ray, S., & Sadiku, R. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400482f · Cited by 245
Crystallization kinetics and morphology of poly(trimethylene terephthalate)
Hong, P.-D., Chung, W.-T., & Hsu, C.-F. (2002) · Polymer · doi:10.1016/s0032-3861(02)00163-5 · Cited by 229
Liu, G.-C., He, Y.-S., Zeng, J.-B., Li, Q.-T., & Wang, Y.-Z. (2014) · Biomacromolecules · doi:10.1021/bm5012739 · Cited by 205
Self-citationEffect of Polylactide Stereocomplex on the Crystallization Behavior of Poly(l-lactic acid)
Rahman, N., Kawai, T., Matsuba, G., Nishida, K., Kanaya, T., Watanabe, H., Okamoto, H., Kato, M., Usuki, A., Matsuda, M., et al. (2009) · Macromolecules · doi:10.1021/ma900004d · Cited by 194
Toughening of poly(L‐lactide) by melt blending with rubbers
Ishida, S., Nagasaki, R., Chino, K., Dong, T., & Inoue, Y. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30134 · Cited by 177
Castillo, R. V., Müller, A. J., Raquez, J.-M., & Dubois, P. (2010) · Macromolecules · doi:10.1021/ma100201g · Cited by 175
Mechanical properties and phase morphology of super-tough PLA/PBAT/EMA-GMA multicomponent blends
Wu, N., & Zhang, H. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.01.063 · Cited by 164
Bai, H., Huang, C., Xiu, H., Gao, Y., Zhang, Q., & Fu, Q. (2013) · Polymer · doi:10.1016/j.polymer.2013.07.051 · Cited by 153
In situ formed crosslinked polyurethane toughened polylactide
Liu, G., He, Y., Zeng, J., Xu, Y., & Wang, Y. (2013) · Polymer Chemistry · doi:10.1039/c3py01649h · Cited by 151
Self-citationWang, Y., Chen, K., Xu, C., & Chen, Y. (2015) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.5b06244 · Cited by 147
Self-citationPolylactide–Poly(6-methyl-ε-caprolactone)–Polylactide Thermoplastic Elastomers
Martello, M. T., & Hillmyer, M. A. (2011) · Macromolecules · doi:10.1021/ma201063t · Cited by 137
Research progress in the heat resistance, toughening and filling modification of PLA
Yang, Y., Zhang, L., Xiong, Z., Tang, Z., Zhang, R., & Zhu, J. (2016) · Science China Chemistry · doi:10.1007/s11426-016-0222-7 · Cited by 137
Biodegradable “Core–Shell” Rubber Nanoparticles and Their Toughening of Poly(lactides)
Sun, Y., & He, C. (2013) · Macromolecules · doi:10.1021/ma4020615 · Cited by 124
Tough Polylactide Graft Copolymers
Theryo, G., Jing, F., Pitet, L. M., & Hillmyer, M. A. (2010) · Macromolecules · doi:10.1021/ma101155p · Cited by 116
Ma, P., Shen, T., Xu, P., Dong, W., Lemstra, P. J., & Chen, M. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00208 · Cited by 112
Deng, L., Xu, C., Wang, X., & Wang, Z. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02751 · Cited by 107
Self-citationWang, L., Jing, X., Cheng, H., Hu, X., Yang, L., & Huang, Y. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie300526u · Cited by 104
Yuan, D., Xu, C., Chen, Z., & Chen, Y. (2014) · Polymer Testing · doi:10.1016/j.polymertesting.2014.07.004 · Cited by 91
Chen, Y., Chen, K., Wang, Y., & Xu, C. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b02195 · Cited by 86
Self-citationAmsden, B. G., Wang, S., & WYSS, U. P. (2004) · Biomacromolecules · doi:10.1021/bm034538j · Cited by 78
Cavitation debonding during deformation of rubber-modified poly(vinyl chloride)
Dompas, D., Groeninckx, G., Isogawa, M., Hasegawa, T., & Kadokura, M. (1995) · Polymer · doi:10.1016/0032-3861(95)91338-8 · Cited by 73
Bai, H., Bai, D., Xiu, H., Liu, H., Zhang, Q., Wang, K., Deng, H., Chen, F., Fu, Q., & Chiu, F.-C. (2014) · RSC Adv. · doi:10.1039/c4ra08823a · Cited by 62
Sangeetha, V. H., Valapa, R. B., Nayak, S. K., & Varghese, T. O. (2016) · Journal of Polymers and the Environment · doi:10.1007/s10924-016-0906-0 · Cited by 60
Kricheldorft, H. R., Stöber, O., & Luebbers, D. (1995) · Macromolecules · doi:10.1021/ma00111a003 · Cited by 59
Liu, C., Li, C., Chen, P., He, J., & Fan, Q. (2004) · Polymer · doi:10.1016/j.polymer.2004.02.030 · Cited by 56
Zeng, J., Li, Y., He, Y., Li, S., & Wang, Y. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie102422q · Cited by 51
Self-citationLiu, M.-J., Chen, S.-C., Yang, K.-K., & Wang, Y.-Z. (2015) · RSC Advances · doi:10.1039/c5ra04742k · Cited by 45
Self-citationQi, F., Tang, M., Chen, X., Chen, M., Guo, G. F., & Zhang, Z. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.08.008 · Cited by 41
Feng, L., Bian, X., Li, G., Chen, Z., & Chen, X. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.12.017 · Cited by 38
Solubility factors as screening tools of biodegradable toughening agents of polylactide
Ruellan, A., Guinault, A., Sollogoub, C., Ducruet, V., & Domenek, S. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42476 · Cited by 37
Ye, S., Lin, T., Tjiu, W. W., Wong, P. K., & He, C. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.38568 · Cited by 36
Xie, L., Xu, H., Li, L., Hsiao, B. S., Zhong, G., & Li, Z. (2016) · Scientific Reports · doi:10.1038/srep34572 · Cited by 28
Deokar, M. D., Idage, S. B., Idage, B. B., & Sivaram, S. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43267 · Cited by 25
Hao, Y., Ge, H., Han, L., Zhang, H., Dong, L., & Sun, S. (2013) · Chinese Journal of Polymer Science · doi:10.1007/s10118-013-1350-4 · Cited by 17
Poly (l-lactide)/PEG-mb-PBAT blends with highly improved toughness and balanced performance
Li, R., Wu, L., & Li, B. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.01.037 · Cited by 17
Hydrostatic Extrusion of Poly(L‐Lactide)
Jin, F., Moon, S., Tsutsumi, S., & Hyon, S. (2005) · Macromolecular Symposia · doi:10.1002/masy.200550609 · Cited by 11
Zeng, L.-X., Liu, M.-J., Chen, S., Zeng, J., & Wang, Y. (2012) · Polymer Chemistry · doi:10.1039/c2py20331f · Cited by 11
Self-citationYan, X., Zhao, Y., Hao, Y., Pan, H., Zhang, H., Wang, Z., & Dong, L. (2017) · Fibers and Polymers · doi:10.1007/s12221-017-1175-9 · Cited by 4
Schmidt (2001) · doi:10.1002/1099-0488(20010201)39:3<300::aid-polb1002>3.0.co;2-m
Cited by
He, L., Song, F., Li, D., Zhao, X., Wang, X., & Wang, Y. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06308 · Cited by 117
Self-citationZhao, X., Li, J., Liu, J., Zhou, W., & Peng, S. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.10.154 · Cited by 89
Poly(lactic acid) stereocomplexes based molecular architectures: Synthesis and crystallization
Michell, R. M., Ladelta, V., Da Silva, E., Müller, A. J., & Hadjichristidis, N. (2023) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2023.101742 · Cited by 77
Zhang, H., Kang, B.-H., Chen, L.-S., & Lu, X. H. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106521 · Cited by 74
Yang, D., Wu, C., Wu, G., Chen, S., & Wang, Y. (2020) · Macromolecules · doi:10.1021/acs.macromol.0c02181 · Cited by 73
Self-citation
Metadata
- Authors
- Yang, D.-D., Liu, W., Zhu, H.-M., Wu, G., Chen, S.-C., Wang, X.-L., & Wang, Y.-Z.
- Affiliations
- National Engineering Laboratory of Eco-Friendly Polymeric Materials (Sichuan), State Key Laboratory of Polymer Materials Engineering, College of Chemistry, Sichuan University, Chengdu 610064, China
- Sichuan University (CN)
- Corresponding author
- Chen, Si-Chong
- Wang, Yu-Zhong
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-07-18
- Volume
- 10
- Issue
- 31
- Pages
- 26594-26603
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2884353472
- Cited by
- 60
- References
- 54
- Citations by year
- 2026: 7 · 2025: 5 · 2024: 6 · 2023: 6 · 2022: 10 · 2021: 9 · 2020: 11 · 2019: 6
- FWCI
- 2.11
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ACS Applied Materials & Interfaces (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Ministry of Science and Technology of the People's Republic of China (2016YFB0302102)
- National Natural Science Foundation of China (51721091, 21474066)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Keywords
- poly(L-lactic acid), toughening, stereocomplex crystallites, poly(D-lactide), polymer blends, impact toughness, matrix crystallization, spherulite size, biodegradable polymers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.