Low Thermal Boundary Resistance Interfaces for GaN-on-Diamond Devices
The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Abstract
The development of GaN-on-diamond devices holds much promise for the creation of high-power density electronics. Inherent to the growth of these devices, a dielectric layer is placed between the GaN and diamond, which can contribute significantly to the overall thermal resistance of the structure. In this work, we explore the role of different interfaces in contributing to the thermal resistance of the interface of GaN/diamond layers, specifically using 5 nm layers of AlN, SiN, or no interlayer at all. Using time-domain thermoreflectance along with electron energy loss spectroscopy, we were able to determine that a SiN interfacial layer provided the lowest thermal boundary resistance (<10 m 2 K/GW) because of the formation of an Si–C–N layer at the interface. The AlN and no interlayer samples were observed to have TBRs greater than 20 m 2 K/GW as a result of a harsh growth environment that roughened the interface (enhancing phonon scattering) when the GaN was not properly protected.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fundamentals of Heat and Mass Transfer
Azim, A. Y. A. (2011) · Cited by 5,433
Analysis of heat flow in layered structures for time-domain thermoreflectance
Cahill, D. G. (2004) · Review of Scientific Instruments · doi:10.1063/1.1819431 · Cited by 1,543
Schmidt, A. J., Chen, X., & Chen, G. (2008) · Review of Scientific Instruments · doi:10.1063/1.3006335 · Cited by 655
Kapitza conductance and heat flow between solids at temperatures from 50 to 300 K
Stoner, R. J., & Maris, H. J. (1993) · Physical Review B · doi:10.1103/physrevb.48.16373 · Cited by 646
Frequency dependence of the thermal conductivity of semiconductor alloys
Koh, Y. K., & Cahill, D. G. (2007) · Physical Review B · doi:10.1103/physrevb.76.075207 · Cited by 383
Thermal Boundary Resistance Between GaN and Substrate in AlGaN/GaN Electronic Devices
Sarua, A., Ji, H., Hilton, K. P., Wallis, D. J., Uren, M. J., Martin, T., & Kuball, M. (2007) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2007.908874 · Cited by 304
Self-citationReducing GaN-on-diamond interfacial thermal resistance for high power transistor applications
Sun, H., Simon, R. B., Pomeroy, J. W., Francis, D., Faili, F., Twitchen, D. J., & Kuball, M. (2015) · Applied Physics Letters · doi:10.1063/1.4913430 · Cited by 209
Self-citationEnhancing and tuning phonon transport at vibrationally mismatched solid-solid interfaces
English, T. S., Duda, J. C., Smoyer, J. L., Jordan, D. A., Norris, P. M., & Zhigilei, L. V. (2012) · Physical Review B · doi:10.1103/physrevb.85.035438 · Cited by 203
Pomeroy, J. W., Bernardoni, M., Dumka, D. C., Fanning, D. M., & Kuball, M. (2014) · Applied Physics Letters · doi:10.1063/1.4865583 · Cited by 192
Self-citationAn optical pump-probe technique for measuring the thermal conductivity of liquids
Schmidt, A., Chiesa, M., Chen, X., & Chen, G. (2008) · Review of Scientific Instruments · doi:10.1063/1.2937458 · Cited by 184
Cited by
Pfeifer, T. W., Schonfeld, H. B., Scott, E. A., Aller, H. T., Gaskins, J. T., Olson, D. H., Braun, J. L., Graham, S., & Hopkins, P. E. (2025) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-080423-010435 · Cited by 16
“This includes measurement at multiple modulation frequencies or with multiple spot sizes (43, 44, 68, 70) or fitting of multiple data types (50),development of transducerless measurements (71,75),and the use of unique sample geometries (44) or experimental configurations (77).”
Self-citation
Metadata
- Authors
- Yates, L., Anderson, J., Gu, X., Lee, C., Bai, T., Mecklenburg, M., Aoki, T., Goorsky, M. S., Kuball, M., Piner, E. L., & Graham, S.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-06-25
- Volume
- 10
- Issue
- 28
- Pages
- 24302-24309
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2811201021
- Cited by
- 169
- References
- 40
- FWCI
- 4.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.