Low Thermal Boundary Resistance Interfaces for GaN-on-Diamond Devices
The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Abstract
The development of GaN-on-diamond devices holds much promise for the creation of high-power density electronics. Inherent to the growth of these devices, a dielectric layer is placed between the GaN and diamond, which can contribute significantly to the overall thermal resistance of the structure. In this work, we explore the role of different interfaces in contributing to the thermal resistance of the interface of GaN/diamond layers, specifically using 5 nm layers of AlN, SiN, or no interlayer at all. Using time-domain thermoreflectance along with electron energy loss spectroscopy, we were able to determine that a SiN interfacial layer provided the lowest thermal boundary resistance (<10 m 2 K/GW) because of the formation of an Si–C–N layer at the interface. The AlN and no interlayer samples were observed to have TBRs greater than 20 m 2 K/GW as a result of a harsh growth environment that roughened the interface (enhancing phonon scattering) when the GaN was not properly protected.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fundamentals of Heat and Mass Transfer
Azim, A. Y. A. (2011) · Cited by 5,433
Analysis of heat flow in layered structures for time-domain thermoreflectance
Cahill, D. G. (2004) · Review of Scientific Instruments · doi:10.1063/1.1819431 · Cited by 1,543
Schmidt, A. J., Chen, X., & Chen, G. (2008) · Review of Scientific Instruments · doi:10.1063/1.3006335 · Cited by 655
Kapitza conductance and heat flow between solids at temperatures from 50 to 300 K
Stoner, R. J., & Maris, H. J. (1993) · Physical Review B · doi:10.1103/physrevb.48.16373 · Cited by 646
Frequency dependence of the thermal conductivity of semiconductor alloys
Koh, Y. K., & Cahill, D. G. (2007) · Physical Review B · doi:10.1103/physrevb.76.075207 · Cited by 383
Thermal Boundary Resistance Between GaN and Substrate in AlGaN/GaN Electronic Devices
Sarua, A., Ji, H., Hilton, K. P., Wallis, D. J., Uren, M. J., Martin, T., & Kuball, M. (2007) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2007.908874 · Cited by 304
Self-citationReducing GaN-on-diamond interfacial thermal resistance for high power transistor applications
Sun, H., Simon, R. B., Pomeroy, J. W., Francis, D., Faili, F., Twitchen, D. J., & Kuball, M. (2015) · Applied Physics Letters · doi:10.1063/1.4913430 · Cited by 209
Self-citationEnhancing and tuning phonon transport at vibrationally mismatched solid-solid interfaces
English, T. S., Duda, J. C., Smoyer, J. L., Jordan, D. A., Norris, P. M., & Zhigilei, L. V. (2012) · Physical Review B · doi:10.1103/physrevb.85.035438 · Cited by 203
Pomeroy, J. W., Bernardoni, M., Dumka, D. C., Fanning, D. M., & Kuball, M. (2014) · Applied Physics Letters · doi:10.1063/1.4865583 · Cited by 192
Self-citationAn optical pump-probe technique for measuring the thermal conductivity of liquids
Schmidt, A., Chiesa, M., Chen, X., & Chen, G. (2008) · Review of Scientific Instruments · doi:10.1063/1.2937458 · Cited by 184
Uncertainty analysis of thermoreflectance measurements
Yang, J., Ziade, E., & Schmidt, A. J. (2016) · Review of Scientific Instruments · doi:10.1063/1.4939671 · Cited by 174
Universal phonon mean free path spectra in crystalline semiconductors at high temperature
Freedman, J. P., Leach, J. H., Preble, E. A., Sitar, Z., Davis, R. F., & Malen, J. A. (2013) · Scientific Reports · doi:10.1038/srep02963 · Cited by 171
Liu, J., Zhu, J., Tian, M., Gu, X., Schmidt, A., & Yang, R. (2013) · Review of Scientific Instruments · doi:10.1063/1.4797479 · Cited by 163
Self-citationBarrier-Layer Optimization for Enhanced GaN-on-Diamond Device Cooling
Zhou, Y., Anaya, J., Pomeroy, J., Sun, H., Gu, X., Xie, A., Beam, E., Becker, M., Grotjohn, T. A., Lee, C., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b08961 · Cited by 158
Self-citationFormation and characterization of 4-inch GaN-on-diamond substrates
Francis, D. A., Faili, F. N., Babic, D. I., Ejeckam, F. E., Nurmikko, A. V., & Maris, H. J. (2009) · Diamond and Related Materials · doi:10.1016/j.diamond.2009.08.017 · Cited by 146
Influence of Interfacial Mixing on Thermal Boundary Conductance Across a Chromium/Silicon Interface
Hopkins, P. E., Norris, P. M., Stevens, R. J., Beechem, T. E., & Graham, S. (2008) · Journal of Heat Transfer · doi:10.1115/1.2897344 · Cited by 139
Self-citationSize dictated thermal conductivity of GaN
Beechem, T. E., McDonald, A. E., Fuller, E. J., Talin, A. A., Rost, C. M., Maria, J., Gaskins, J. T., Hopkins, P. E., & Allerman, A. A. (2016) · Journal of Applied Physics · doi:10.1063/1.4962010 · Cited by 129
Phonon scattering in strained transition layers for GaN heteroepitaxy
Cho, J., Li, Y., Hoke, W. E., Altman, D. H., Asheghi, M., & Goodson, K. E. (2014) · Physical Review B · doi:10.1103/physrevb.89.115301 · Cited by 128
Low-Temperature Bonded GaN-on-Diamond HEMTs With 11 W/mm Output Power at 10 GHz
Chao, P. C., Chu, K. K., Creamer, C. T., Díaz, J. A. I., Yurovchak, T., Shur, M. S., Kallaher, R., McGray, C. D., Via, G. D., & Blevins, J. D. (2015) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2015.2480756 · Cited by 118
Thickness dependent thermal conductivity of gallium nitride
Ziade, E., Yang, J., Brummer, G., Nothern, D. M., Moustakas, T. D., & Schmidt, A. J. (2017) · Applied Physics Letters · doi:10.1063/1.4974321 · Cited by 111
Ultralow Thermal Conductivity of Multilayers with Highly Dissimilar Debye Temperatures
Dechaumphai, E., Lu, D., Kan, J. J., Moon, J., Fullerton, E. E., Liu, Z., & Chen, R. (2014) · Nano Letters · doi:10.1021/nl500127c · Cited by 110
Influence of strain on thermal conductivity of silicon nitride thin films
Alam, M., Manoharan, M. P., Haque, A., Muratore, C., & Voevodin, A. A. (2012) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/22/4/045001 · Cited by 104
Degradation of AlGaN/GaN HEMTs under elevated temperature lifetesting
Chou, Y. C., Leung, D. L., Smorchkova, I., Wójtowicz, M., Grundbacher, R., Callejo, L. G., Kan, Q., Lai, R. K., Liu, P. H., Eng, D. C., et al. (2004) · Microelectronics Reliability · doi:10.1016/j.microrel.2004.03.008 · Cited by 95
Bougher, T. L., Yates, L., Lo, C.-F., Johnson, W., Graham, S., & Cola, B. A. (2016) · Nanoscale and Microscale Thermophysical Engineering · doi:10.1080/15567265.2016.1154630 · Cited by 91
Self-citationInterpreting picosecond acoustics in the case of low interface stiffness
Hohensee, G. T., Hsieh, W.-P., Losego, M. D., & Cahill, D. G. (2012) · Review of Scientific Instruments · doi:10.1063/1.4766957 · Cited by 87
Operating channel temperature in GaN HEMTs: DC versus RF accelerated life testing
Pomeroy, J. W., Uren, M. J., Lambert, B., & Kuball, M. (2015) · Microelectronics Reliability · doi:10.1016/j.microrel.2015.09.025 · Cited by 79
Self-citationRF High-Power Operation of AlGaN/GaN HEMTs Epitaxially Grown on Diamond
Hirama, K., Kasu, M., & Taniyasu, Y. (2012) · IEEE Electron Device Letters · doi:10.1109/led.2012.2185678 · Cited by 74
AlGaN/GaN HEMT on (111) single crystalline diamond
Alomari, M., Dussaigne, A., Martin, D. D., Grandjean, N., Gaquière, C., & Kohn, E. (2010) · Electronics Letters · doi:10.1049/el.2010.2937 · Cited by 72
High temperature enthalpy and heat capacity of GaN
Leitner, J., Strejc, A., Sedmidubský, D., & Růžička, K. (2003) · Thermochimica Acta · doi:10.1016/s0040-6031(02)00547-6 · Cited by 66
Thermal conductivity of bulk GaN—Effects of oxygen, magnesium doping, and strain field compensation
Simon, R. B., Anaya, J., & Kuball, M. (2014) · Applied Physics Letters · doi:10.1063/1.4901967 · Cited by 57
Self-citationHeat Capacity of 4H-SiC Determined by Differential Scanning Calorimetry
Hitova, L., Yakimova, R., Trifonova, E. P., Lenchev, A., & Janzen, E. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393935 · Cited by 54
600 V JEDEC-qualified highly reliable GaN HEMTs on Si substrates
Kikkawa, T., Hosoda, T., Imanishi, K., Shono, K., Itabashi, K., Ogino, T., Miyazaki, Y., Mochizuki, A., Kiuchi, K., Kanamura, M., et al. (2014) · Technical digest - International Electron Devices Meeting/Technical digest · doi:10.1109/iedm.2014.7046968 · Cited by 54
Analysis and characterization of thermal transport in GaN HEMTs on Diamond substrates
Altman, D., Tyhach, M., McClymonds, J. W., Kim, S. H., Graham, S. L., Cho, J., Goodson, K. E., Francis, D. A., Faili, F. N., Ejeckam, F. E., et al. (2014) · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems · doi:10.1109/itherm.2014.6892416 · Cited by 51
Self-citationMeasurements of specific heat and mass density in CVD diamond
Graebner, J. E. (1996) · Diamond and Related Materials · doi:10.1016/0925-9635(96)00550-x · Cited by 42
Reliability improvement in GaN HEMT power device using a field plate approach
Wu, W.-H., Lin, Y.-C., Chin, P.-C., Hsu, C.-C., Lee, J.-H., Liu, S.-C., Maa, J., Iwai, H., Chang, E. Y., & Hsu, H. (2017) · Solid-State Electronics · doi:10.1016/j.sse.2017.05.001 · Cited by 37
The Impact of Noncontinuum Thermal Transport on the Temperature of AlGaN/GaN HFETs
Donmezer, F. N., & Graham, S. L. (2014) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2014.2318672 · Cited by 30
Self-citationRecent advances in GaN HEMT development
Schwierz, F., & Ambacher, O. (2004) · IEEE International Symposium on Electron Devices for Microwave and Optoelectronic Applications (EDMO) · doi:10.1109/edmo.2003.1260049 · Cited by 28
Measurement of Thermal Conductivity of Anisotropic SiC Crystal
Su, G., Zheng, X., Qiu, L., Tang, D., & Zhu, J. (2012) · International Journal of Thermophysics · doi:10.1007/s10765-012-1163-7 · Cited by 26
Monachon, C., & Weber, L. (2014) · Advanced Engineering Materials · doi:10.1002/adem.201400060 · Cited by 22
Cheaito, R., Sood, A., Yates, L., Bougher, T. L., Cheng, Z., Asheghi, M., Graham, S. L., & Goodson, K. E. (2017) · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems · doi:10.1109/itherm.2017.7992555 · Cited by 16
Self-citation
Cited by
Pfeifer, T. W., Schonfeld, H. B., Scott, E. A., Aller, H. T., Gaskins, J. T., Olson, D. H., Braun, J. L., Graham, S., & Hopkins, P. E. (2025) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-080423-010435 · Cited by 16
“This includes measurement at multiple modulation frequencies or with multiple spot sizes (43, 44, 68, 70) or fitting of multiple data types (50),development of transducerless measurements (71,75),and the use of unique sample geometries (44) or experimental configurations (77).”
Self-citation
Metadata
- Authors
- Yates, L., Anderson, J., Gu, X., Lee, C., Bai, T., Mecklenburg, M., Aoki, T., Goorsky, M. S., Kuball, M., Piner, E. L., & Graham, S.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-06-25
- Volume
- 10
- Issue
- 28
- Pages
- 24302-24309
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2811201021
- Cited by
- 169
- References
- 40
- FWCI
- 4.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.