CoChat

Highly Efficient Hydrogen Evolution from Seawater by Biofunctionalized Exfoliated MoS2 Quantum Dot Aerogel Electrocatalysts That Is Superior to Pt

Chen, I-Wen Peter, Hsiao, Chien-Hsuan, Huang, Jheng-Yi, Peng, Yu-Hong, Chang, Chia-Yu · 2019 · ACS Applied Materials & Interfaces

The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index; 5 of the 28 sources its claims cite were checked for support.

Abstract

As a source of clean and sustainable energy, reliable hydrogen production requires highly efficient and stable electrocatalysts. In recent years, molybdenum disulfide (MoS 2 ) has been demonstrated as a promising electrocatalyst for hydrogen evolution reactions (HERs). Here, we demonstrate that a three-dimensional (3D) MoS 2 quantum dot (MoS 2 QD) aerogel is an efficient cathode electrocatalyst that can be used to enhance the HER in acid, neutral, and alkaline (e.g., real seawater) environments. In studying the effects of the exfoliated MoS 2 dimension for the HER, we found that the biofunctionalized exfoliated MoS 2 QD shows much higher cathodic density, a more lower energy input, and a lower Tafel slope for the HER than the larger size of the chlorophyll-assisted exfoliated MoS 2, highlighting the importance of the size of the MoS 2 aerogel support for accelerating the HER performance. Moreover, the electrocatalytic activity of MoS 2 QD-aerogel is superior to that of Pt in neutral conditions. In real seawater, the MoS 2 QD-aerogel sample exhibits stable HER performance after consecutive scanning for 150 cycles, while the HER activity of the Pt dramatically decreases after 50 cycles. These results showed for the first time how the 3D MoS 2 configuration in MoS 2 aerogel can be used to effectively produce hydrogen for clean energy applications.

Overview

CoChat Summary

TL;DR

A biofunctionalized exfoliated MoS2 quantum dot aerogel (MoS2QD-aerogel-100) is an efficient hydrogen evolution reaction electrocatalyst in acid, neutral, and real seawater, reaching a 53 mV overpotential at 7 mA/g and a 41 mV/dec Tafel slope in 0.5 M H2SO4. It outperforms commercial Pt in neutral electrolyte and real seawater at high overpotential, remaining stable after 150 seawater cycles while Pt degrades after 50.

Key findings

  • In 0.5 M H2SO4, MoS2QD-aerogel-100 achieved an overpotential of 53 mV at 7 mA/g and a Tafel slope of 41 mV/dec; MoS2-aerogel-100 showed 63 mV at 10 mA/g and 45 mV/dec. Hydrothermal treatment reduced the exfoliated MoS2 sheet size from ∼167 nm to ∼29 nm.
  • Electrochemical impedance spectroscopy gave a charge-transfer resistance of 14 Ω for MoS2QD-aerogel-100 versus 27 Ω for MoS2-aerogel-100; the aerogel had a Brunauer–Emmett–Teller average pore size of 5.3 nm.
  • Stability in acid: the LSV curve after 10,000 cycles shifted only 3 mV at 150 mA/g, and chronopotentiometric response at 10 mA/g showed no significant change over 100 h.
  • In neutral electrolyte, MoS2QD-aerogel-100 had a Tafel slope of 166 mV/dec versus 223 mV/dec for Pt. In real seawater (Pacific Ocean, pH 8.8), MoS2QD-aerogel-100 remained stable after 150 cycles while Pt activity decreased after 50 cycles; after 150 cycles, MoS2QD-aerogel-100’s applied potential was 0.15 V more positive than Pt at 80 mA/g.

Methods

  • Chlorophyll-assisted liquid-phase exfoliation: MoS2 powder was sonicated in chlorophyll extract/acetone for 5 h at 10 °C; the suspension was mixed with agar and freeze-dried to form MoS2-aerogel-50. For MoS2QD-aerogel-100, the exfoliated suspension was hydrothermally treated at 120 °C for 8 h, shear-mixed with agar, autoclaved at 120 °C for 3 h, and freeze-dried.
  • Electrochemical measurements used a three-electrode setup in 0.5 M H2SO4 with Pt counter and Ag/AgCl reference; LSV was swept from 0 to −0.6 V vs RHE at 5 mV/s, stability was tested by cycling and chronoamperometry for 100 h, and EIS was run from 1 Hz to 100 kHz with 5 mV amplitude. Neutral KCl and real seawater (pH 8.8) were also tested.
  • Characterization included TEM/HRTEM, FESEM/EDS, TMAFM, Raman spectroscopy, XPS, DLS, and nitrogen adsorption–desorption.

Limitations

  • The paper has no dedicated limitations section; it states that seawater HER remains challenging because most electrocatalysts tend to deactivate and/or corrode in seawater.
  • Evident from the text: current densities are normalized by mass of the aerogel electrode (mA/g) rather than geometric area, which complicates direct benchmarking against conventional Pt electrode metrics.
  • Evident from the text: seawater durability is shown only up to 150 LSV cycles at one pH (8.8), with no longer-term seawater stability, Faradaic efficiency, or product quantification reported.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1021/acsami.9b02582

Cites

53 of 53 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Verification

Claims the paper makes

4 Valid · 2 Not valid · 10 Not checked · 37 Own results and interpretations

25 more claims

Create a free account to see all 53 claims and every source verdict.

See all claims — free account
  • Probably not a substantial claim. 13
  • It may state two separate claims as one. 13
  • The quote only partly states this claim. 1

Create a free account to see these claims.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

1 of 1

Citations

Cites

Show all 53 references

Research works printed but not linked: 1

  1. 10.1039/c3cs60217f · DOI · Paper page

Cited by

Metadata

Authors
Chen, I.-W. P., Hsiao, C.-H., Huang, J.-Y., Peng, Y.-H., & Chang, C.-Y.
Affiliations
National Taitung University (TW)
Corresponding author
Chen, I-Wen Peter
Venue
ACS Applied Materials & Interfaces
Published
2019-03-22
Volume
11
Issue
15
Pages
14159-14165
ISSN
  • 1944-8244 (ISSN-L)
  • 1944-8252
OpenAlex
W2931642344
Cited by
59
References
47
Citations by year
2026: 3 · 2025: 7 · 2024: 7 · 2023: 11 · 2022: 16 · 2021: 6 · 2020: 7 · 2019: 2
FWCI
1.65
Type
journal article
Language
en
Open access
closed
Locations
  • ACS Applied Materials & Interfaces (publishedVersion)
  • PubMed (publishedVersion)
Funders
Ministry of Science and Technology, Taiwan (107-2813-C-143-028-M, 107-2628-M-143-001-MY2)
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Materials Science › Materials Chemistry › Hydrogen Storage and Materials
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Advanced Photocatalysis Techniques
Keywords
hydrogen evolution reaction, MoS2, MoS2 quantum dots, seawater electrolysis, electrocatalyst stability, platinum-free electrocatalysts, Tafel slope

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.