The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Rapid-Response, Low Detection Limit, and High-Sensitivity Capacitive Flexible Tactile Sensor Based on Three-Dimensional Porous Dielectric Layer for Wearable Electronic Skin
Abstract
Three-dimensional (3D) porous conductive composites explored in highly sensitive tactile sensors have attracted extensive close attention in recent years owing to their peculiar porous structure and unique physical properties in terms of excellent mechanical flexibility, high relative dielectric permittivity, and good elastic property. Herein, we report an practical, efficient, and macroscopic dip-coating process to manufacture rapid-response, low detection limit, high-sensitivity, and highly sensitive capacitive flexible tactile sensors. The fabrication process, tactile perception mechanism, and sensing performance of the developed devices are comparatively investigated. The homogeneous 3D hybrid network constructed by graphene nanoplatelets/carboxyl-functionalized multiwalled carbon nanotubes/silicone rubber composites anchored on polyurethane sponge skeletons exhibits a significantly improved dielectric property, resulting in a high-performance capacitive flexible tactile sensor with a fast response time (∼45 ms), an extremely low-pressure detection limit of ∼3 Pa, excellent sensitivity (∼0.062 kPa –1 ), and excellent durability and stability over 2000 cycles. Importantly, the flexible devices can be used as the wearable electronic skin and successfully mounted on human skin or a soft-bodied robot to achieve the capability of physiological stimuli monitoring, micropressure monitoring, soft grabbing, etc. Our rapid-response, low detection limit, and high-sensitivity capacitive flexible tactile sensor with a novel 3D porous dielectric layer could be a prospective candidate for the wearable applications in real-time and high-accuracy portable healthcare monitoring devices, advanced human–machine interfaces, and intelligent robot perception systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chen, Z., Ren, W., Gao, L., Liu, B., Pei, S., & Cheng, H.-M. (2011) · Nature Materials · doi:10.1038/nmat3001 · Cited by 3,834
Highly sensitive flexible pressure sensors with microstructured rubber dielectric layers
Mannsfeld, S. C. B., Tee, B. C.-K., Stoltenberg, R. M., Chen, C. V. H.-H., Barman, S., Muir, B. V. O., Sokolov, A. N., Reese, C., & Bao, Z. (2010) · Nature Materials · doi:10.1038/nmat2834 · Cited by 3,291
Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes
Lipomi, D. J., Vosgueritchian, M., Tee, B. C.-K., Hellstrom, S. L., Lee, J. A., Fox, C. H., & Bao, Z. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.184 · Cited by 3,188
Wang, X., Gu, Y., Xiong, Z., Cui, Z., & Zhang, T. (2014) · Advanced Materials · doi:10.1002/adma.201304248 · Cited by 1,398
Highly stretchable electroluminescent skin for optical signaling and tactile sensing
Larson, C., Peele, B., Li, S., Robinson, S., Totaro, M., Beccai, L., Mazzolai, B., & Shepherd, R. (2016) · Science · doi:10.1126/science.aac5082 · Cited by 1,393
Choong, C., Shim, M., Lee, B., Jeon, S., Ko, D., Kang, T., Bae, J., Lee, S. H., Byun, K., Im, J., et al. (2014) · Advanced Materials · doi:10.1002/adma.201305182 · Cited by 1,252
Flexible Sensing Electronics for Wearable/Attachable Health Monitoring
Wang, X., Liu, Z., & Zhang, T. (2017) · Small · doi:10.1002/smll.201602790 · Cited by 1,075
An Overview of the Development of Flexible Sensors
Han, S., Peng, H., Sun, Q., Venkatesh, S., Chung, K., Lau, S. C., Zhou, Y., & Roy, V. A. L. (2017) · Advanced Materials · doi:10.1002/adma.201700375 · Cited by 771
Park, J., Lee, Y., Hong, J., Lee, Y., Ha, M., Jung, Y., Lim, H., Kim, S. Y., & Ko, H. (2014) · ACS Nano · doi:10.1021/nn505953t · Cited by 649
Chen, Z., Wang, Z., Li, X., Lin, Y., Luo, N., Long, M., Zhao, N., & Xu, J.-B. (2017) · ACS Nano · doi:10.1021/acsnano.6b08027 · Cited by 605
Cited by
Yang, R., Dutta, A., Li, B., Tiwari, N., Zhang, W., Niu, Z., Gao, Y., Erdely, D., Xin, X., Li, T., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-38274-2 · Cited by 390
Recent Progress in Flexible Pressure Sensors Based Electronic Skin
Pierre Claver, U., & Zhao, G. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202001187 · Cited by 291
Research progress of flexible capacitive pressure sensor for sensitivity enhancement approaches
Li, R., Zhou, Q., Bi, Y., Cao, S., Xia, X., Yang, A., Li, S., & Xiao, X. (2021) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2020.112425 · Cited by 276
Progress of flexible strain sensors for physiological signal monitoring
Shen, Z., Liu, F., Huang, S., Wang, H., Yang, C., Hang, T., Tao, J., Xia, W., & Xie, X. (2022) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2022.114298 · Cited by 250
Wearable Skin Sensors and Their Challenges: A Review of Transdermal, Optical, and Mechanical Sensors
Ahmad Tarar, A., Mohammad, U., & K. Srivastava, S. (2020) · Biosensors · doi:10.3390/bios10060056 · Cited by 119
Metadata
- Authors
- Qiu, J., Guo, X., Chu, R., Wang, S., Zeng, W., Qu, L., Zhao, Y., Yan, F., & Xing, G.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-10-09
- Volume
- 11
- Issue
- 43
- Pages
- 40716-40725
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2979870515
- Cited by
- 260
- References
- 59
- FWCI
- 9.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Rapid-Response, Low Detection Limit, and High-Sensitivity Capacitive Flexible Tactile Sensor Based on Three-Dimensional Porous Dielectric Layer for Wearable Electronic Skin. https://app.cochat.ai/papers/10.1021/acsami.9b16511
- The paper
- Qiu, J., Guo, X., Chu, R., Wang, S., Zeng, W., Qu, L., Zhao, Y., Yan, F., & Xing, G. (2019). Rapid-Response, Low Detection Limit, and High-Sensitivity Capacitive Flexible Tactile Sensor Based on Three-Dimensional Porous Dielectric Layer for Wearable Electronic Skin. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.9b16511
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.