3D Printing of a Double Network Hydrogel with a Compression Strength and Elastic Modulus Greater than those of Cartilage
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
This article demonstrates a two-step method to 3D print double network hydrogels at room temperature with a low-cost ($300) 3D printer. A first network precursor solution was made 3D printable via extrusion from a nozzle by adding a layered silicate to make it shear-thinning. After printing and UV-curing, objects were soaked in a second network precursor solution and UV-cured again to create interpenetrating networks of poly(2-acrylamido-2-methylpropanesulfonate) and polyacrylamide. By varying the ratio of polyacrylamide to cross-linker, the trade-off between stiffness and maximum elongation of the gel can be tuned to yield a compression strength and elastic modulus of 61.9 and 0.44 MPa, respectively, values that are greater than those reported for bovine cartilage. The maximum compressive (93.5 MPa) and tensile (1.4 MPa) strengths of the gel are twice that of previous 3D printed gels, and the gel does not deform after it is soaked in water. By 3D printing a synthetic meniscus from an X-ray computed tomography image of an anatomical model, we demonstrate the potential to customize hydrogel implants based on 3D images of a patient's anatomy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels
Bertassoni, L. E., Cardoso, J. C., Manoharan, V., Cristino, A. L., Bhise, N. S., Araujo, W. A., Zorlutuna, P., Vrana, N. E., Ghaemmaghami, A. M., Dokmeci, M. R., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024105 · Cited by 642
Cited by
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Soft Materials by Design: Unconventional Polymer Networks Give Extreme Properties
Zhao, X., Chen, X., Yuk, H., Lin, S., Liu, X., & Parada, G. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01088 · Cited by 1,161
Bioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs
Ashammakhi, N., Ahadian, S., Xu, C., Montazerian, H., Ko, H., Nasiri, R., Barros, N., & Khademhosseini, A. (2019) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100008 · Cited by 549
Fundamentals and Applications of Photo-Cross-Linking in Bioprinting
Lim, K. S., Galarraga, J. H., Cui, X., Lindberg, G. C. J., Burdick, J. A., & Woodfield, T. B. F. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00812 · Cited by 416
Extrusion 3D Printing of Polymeric Materials with Advanced Properties
Jiang, Z., Diggle, B., Tan, M. L., Viktorova, J., Bennett, C. W., & Connal, L. A. (2020) · Advanced Science · doi:10.1002/advs.202001379 · Cited by 408
3D Printing of Multifunctional Hydrogels
Chen, Z., Zhao, D., Liu, B., Nian, G., Li, X., Yin, J., Qu, S., & Yang, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900971 · Cited by 398
Gao, F., Xu, Z., Liang, Q., Liu, B., Li, H., Wu, Y., Zhang, Y., Lin, Z., Wu, M., Ruan, C., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706644 · Cited by 330
Enhancing Biopolymer Hydrogel Functionality through Interpenetrating Networks
Dhand, A. P., Galarraga, J. H., & Burdick, J. A. (2021) · Trends in Biotechnology · doi:10.1016/j.tibtech.2020.08.007 · Cited by 314
Printed aerogels: chemistry, processing, and applications
Feng, J., Su, B.-L., Xia, H., Zhao, S., Gao, C., Wang, L., Ogbeide, O., Feng, J., & Hasan, T. (2021) · Chemical Society Reviews · doi:10.1039/c9cs00757a · Cited by 313
Advanced Polymer Designs for Direct‐Ink‐Write 3D Printing
Li, L., Lin, Q., Tang, M., Duncan, A. J. E., & Ke, C. (2019) · Chemistry – A European Journal · doi:10.1002/chem.201900975 · Cited by 258
Zhang, Y., Zhang, R., & Tao, Y. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.121300 · Cited by 27
Metadata
- Authors
- Yang, F., Tadepalli, V., & Wiley, B. J.
- Venue
- ACS Biomaterials Science & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-04-14
- Volume
- 3
- Issue
- 5
- Pages
- 863-869
- ISSN
- 2373-9878 (ISSN-L)
- OpenAlex
- W2605143948
- Cited by
- 145
- References
- 4
- FWCI
- 5.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.