The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
3D-Printed High Strength Bioactive Supramolecular Polymer/Clay Nanocomposite Hydrogel Scaffold for Bone Regeneration
Abstract
The emerging 3D bioprinting technique that is strongly dependent on the development of bioinks offers a promising opportunity to customize personalized bioscaffolds for precision and individualized therapy of bone defects. Hydrogels are one sort of attractive scaffolding materials due to their resemblance to extracellular matrices. Although much progress has been made in designing and fabricating high strength hydrogels, very few of them have been extended to the treatment of bone defects. In this work, we developed a hybrid bioink composed of a hydrogen bonding monomer ( N -acryloyl glycinamide) (NAGA) and nanoclay. The hybrid ink could be conveniently tailored as a high strength PNAGA-Clay composite scaffold under UV light illumination of printed prehydrogel. The hydrogen bonding combined with physical cross-linking of nanoclay contributed to the superior mechanical performances as well as swelling stability of the hydrogels and bioscaffols. The sustainable release of intrinsic Mg 2+ and Si 4+ from the PNAGA-Clay scaffold was shown to promote the osteogenic differentiation of primary rat osteoblast (ROB) cells. Importantly, this implantable PNAGA-Clay scaffold highly efficiently facilitated the regeneration of new bone in tibia defects of rats. We anticipate that hybridization of the hydrogen bonding monomer with a variety of bioactive inorganic nanoparticles will offer new possibilities to develop numerous bioinks for 3D-printing of desired bioscaffolds to realize individualized repair of degenerated load-bearing tissues.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Reffitt, D. M., Ogston, N., Jugdaohsingh, R., Cheung, H. F. J., Evans, B. A. J., Thompson, R. P. H., Powell, J. J., & Hampson, G. N. (2003) · Bone · doi:10.1016/s8756-3282(02)00950-x · Cited by 876
Biofabrication of bone tissue: approaches, challenges and translation for bone regeneration
Tang, D., Tare, R. S., Yang, L.-Y., Williams, D. F., Ou, K.-L., & Oreffo, R. O. C. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.024 · Cited by 613
Biomimetic 3D tissue printing for soft tissue regeneration
Pati, F., Ha, D.-H., Jang, J., Han, H. H., Rhie, J.-W., & Cho, D.-W. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.043 · Cited by 368
Cited by
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
Chimene, D., Kaunas, R., & Gaharwar, A. K. (2020) · Advanced Materials · doi:10.1002/adma.201902026 · Cited by 600
Recent Advances in Design of Functional Biocompatible Hydrogels for Bone Tissue Engineering
Xue, X., Hu, Y., Deng, Y., & Su, J. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009432 · Cited by 532
Extrusion 3D Printing of Polymeric Materials with Advanced Properties
Jiang, Z., Diggle, B., Tan, M. L., Viktorova, J., Bennett, C. W., & Connal, L. A. (2020) · Advanced Science · doi:10.1002/advs.202001379 · Cited by 408
Askari, M., Afzali Naniz, M., Kouhi, M., Saberi, A., Zolfagharian, A., & Bodaghi, M. (2021) · Biomaterials Science · doi:10.1039/d0bm00973c · Cited by 369
Metadata
- Authors
- Zhai, X., Ma, Y., Hou, C., Gao, F., Zhang, Y., Ruan, C., Pan, H., Lu, W. W., & Liu, W.
- Venue
- ACS Biomaterials Science & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-05-26
- Volume
- 3
- Issue
- 6
- Pages
- 1109-1118
- ISSN
- 2373-9878 (ISSN-L)
- OpenAlex
- W2615301342
- Cited by
- 243
- References
- 4
- FWCI
- 9.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D-Printed High Strength Bioactive Supramolecular Polymer/Clay Nanocomposite Hydrogel Scaffold for Bone Regeneration. https://app.cochat.ai/papers/10.1021/acsbiomaterials.7b00224
- The paper
- Zhai, X., Ma, Y., Hou, C., Gao, F., Zhang, Y., Ruan, C., Pan, H., Lu, W. W., & Liu, W. (2017). 3D-Printed High Strength Bioactive Supramolecular Polymer/Clay Nanocomposite Hydrogel Scaffold for Bone Regeneration. ACS Biomaterials Science & Engineering. https://doi.org/10.1021/acsbiomaterials.7b00224
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.