Preparation and Statistical Characterization of Tunable Porous Sponge Scaffolds using UV Cross-linking of Methacrylate-Modified Silk Fibroin
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Silk fibroin sponges have been widely studied and reported in literature for tissue engineering applications. Several fabrication methods have been proposed during the years to cover most of the demands in terms of properties, which should be adapted to the considered tissue. Most of these procedures are based on the secondary structure transition of the protein to the stable β crystalline form. This transition, known as physical cross-linking, makes the sponge resistant to dissolution in water, and, in general, increases the sponge stiffness. In our work, we propose an alternative method to ensure the stability of the sponge based on chemical cross-linking of a methacrylated version of silk fibroin (Sil-MA) obtained via chemical modification. The Sil-MA water solution with the addition of a photoinitiator (LAP) allows the opening, under UV radiation, of a double carbon–carbon bond and radical polymerization. The incorporation of air bubbles (that serves as a template for the pores) was accomplished by a mixer; then, the foam was stabilized under UV light and the excess water was removed by freeze-drying. Because of the cytotoxicity of the photoinitiator (found when used at a high concentration), an additional washing step in water has been introduced to eliminate the residues and improve the cells’ viability. Fourier transform infrared (FTIR) analysis confirmed the functionalization of the protein. To evaluate the effect of the composition on the sponge properties, a 2 3 full factorial design of the experiment has been adopted. FTIR analysis revealed that the sponge composition did not affect the protein’s secondary structure. The analysis of images obtained by SEM allowed some statistical measures of the porosity curves to be studied and modeled. The same modeling procedure was applied to the dissolution test in a simulated body fluid, to the water absorption, and to the cell viability (tested by the MTT and LDH assays). An empirical model for each property was built, showing how by changing the composition it is possible to tune the sponge properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Silk fibroin biomaterials for tissue regenerations
Kundu, B., Rajkhowa, R., Kundu, S. C., & Wang, X. (2013) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.043 · Cited by 1,391
FTIR reveals structural differences between native β‐sheet proteins and amyloid fibrils
Zandomeneghi, G., Krebs, M. R. H., McCammon, M. G., & Fändrich, M. (2004) · Protein Science · doi:10.1110/ps.041024904 · Cited by 725
High-strength silk protein scaffolds for bone repair
Mandal, B. B., Grinberg, A., Seok Gil, E., Panilaitis, B., & Kaplan, D. L. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1119474109 · Cited by 401
Cited by
Modeling a dynamic printability window on polysaccharide blend inks for extrusion bioprinting
Perin, F., Spessot, E., Famà, A., Bucciarelli, A., Callone, E., Mota, C., Motta, A., & Maniglio, D. (2023) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c01143 · Cited by 33
Self-citationBucciarelli, A., Petretta, M., Grigolo, B., Gambari, L., Bossi, A. M., Grassi, F., & Maniglio, D. (2022) · Gels · doi:10.3390/gels8120833 · Cited by 31
“This signal was integrated after normalization with respect to the signal at 1 ppm to calculate the degree of GMA substitution, which resulted in DS (%) = 33% in accordance with the TNBS assay and previously published results [27,34].”
BackgroundResultInfluentialSelf-citationPhotocrosslinkable silk-based biomaterials for regenerative medicine and healthcare applications
Dey, S., Jaiswal, C., Shome, S., Bhar, B., Bandyopadhyay, A., Manikumar, K., Dadheech, R., & Mandal, B. B. (2023) · Regenerative Engineering and Translational Medicine · doi:10.1007/s40883-022-00277-8 · Cited by 24
Silk fibroin methacrylation: chemical synthesis to biomechanical optimization in tissue engineering
Wu, C. A., Zhu, Y., & Woo, Y. J. (2025) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c01931 · Cited by 17
Metadata
- Authors
- Bucciarelli, A., Muthukumar, T., Kim, J. S., Kim, W. K., Quaranta, A., Maniglio, D., Khang, G., & Motta, A.
- Venue
- ACS Biomaterials Science & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-11-12
- Volume
- 5
- Issue
- 12
- Pages
- 6374-6388
- ISSN
- 2373-9878 (ISSN-L)
- OpenAlex
- W2988199981
- Cited by
- 70
- References
- 3
- FWCI
- 2.09
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Preparation and Statistical Characterization of Tunable Porous Sponge Scaffolds using UV Cross-linking of Methacrylate-Modified Silk Fibroin. https://app.cochat.ai/papers/10.1021/acsbiomaterials.9b00814
- The paper
- Bucciarelli, A., Muthukumar, T., Kim, J. S., Kim, W. K., Quaranta, A., Maniglio, D., Khang, G., & Motta, A. (2019). Preparation and Statistical Characterization of Tunable Porous Sponge Scaffolds using UV Cross-linking of Methacrylate-Modified Silk Fibroin. ACS Biomaterials Science & Engineering. https://doi.org/10.1021/acsbiomaterials.9b00814
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.