Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 310

The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.

Atmospheric Pressure and Room Temperature Synthesis of Methanol through Plasma-Catalytic Hydrogenation of CO2

Wang, Li, Yi, Yanhui, Guo, Hongchen, Tu, Xin·2018·ACS Catalysis

Abstract

CO 2 hydrogenation to methanol is a promising process for CO 2 conversion and utilization. Despite a well-developed route for CO hydrogenation to methanol, the use of CO 2 as a feedstock for methanol synthesis remains underexplored, and one of its major challenges is high reaction pressure (usually 30–300 atm). In this work, atmospheric pressure and room temperature (∼30 °C) synthesis of methanol from CO 2 and H 2 has been successfully achieved using a dielectric barrier discharge (DBD) with and without a catalyst. The methanol production was strongly dependent on the plasma reactor setup; the DBD reactor with a special water-electrode design showed the highest reaction performance in terms of the conversion of CO 2 and methanol yield. The combination of the plasma with Cu/γ-Al 2 O 3 or Pt/γ-Al 2 O 3 catalyst significantly enhanced the CO 2 conversion and methanol yield compared to the plasma hydrogenation of CO 2 without a catalyst. The maximum methanol yield of 11.3% and methanol selectivity of 53.7% were achieved over the Cu/γ-Al 2 O 3 catalyst with a CO 2 conversion of 21.2% in the plasma process, while no reaction occurred at ambient conditions without using plasma. The possible reaction mechanisms in the plasma CO 2 hydrogenation to CH 3 OH with and without a catalyst were proposed by combined means of electrical and optical diagnostics, product analysis, catalyst characterization, and plasma kinetic modeling. These results have successfully demonstrated that this unique plasma process offers a promising solution for lowering the kinetic barrier of catalytic CO 2 hydrogenation to methanol instead of using traditional approaches (e.g., high reaction temperature and high-pressure process), and has great potential to deliver a step-change in future CO 2 conversion and utilization.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/acscatal.7b02733

Cites

34 of 34 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 34 references

Cited by

Metadata

Authors
Wang, L., Yi, Y., Guo, H., & Tu, X.
Venue
ACS Catalysis
Published
2017-11-30
Volume
8
Issue
1
Pages
90-100
ISSN
2155-5435 (ISSN-L)
OpenAlex
W2769712031
Cited by
310
References
34
FWCI
6.34
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.