The DOI matches its Crossref record; 75 of the 75 references it cites were found in a registry or an index.
Stabilization of Black Perovskite Phase in FAPbI3 and CsPbI3
Abstract
Although halide perovskites allow a great versatility, the application on single-absorber solar cells restricts significantly the number of available materials. In this context, CsPbI 3 and FAPbI 3 (FA, formamidinium) present a huge potential for the inorganic approach with enhanced stability and narrow bandgap, respectively. However, for these materials, Cs + and FA + are relatively too small and too big to stabilize the perovskite black phase at room temperature, both presenting a nonphotoactive yellow phase as the most stable phase. This fact limits dramatically their application and also helps in the understanding of the main research lines in the halide perovskite photovoltaic field in the quest for the stabilization of FAPbI 3 . In this Perspective, we present an overview of different strategies for the stabilization of the perovskite black phase of these two materials. We evaluate the stability approaches envisioning efficient and stable materials, with a particular focus on the positive and limiting aspects of the exploitation of low dimensionality and chemi-structural mechanisms.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Detailed Balance Limit of Efficiency of p-n Junction Solar Cells
Shockley, W., & Queisser, H. J. (1961) · Journal of Applied Physics · doi:10.1063/1.1736034 · Cited by 13,258
Protesescu, L., Yakunin, S., Bodnarchuk, M. I., Krieg, F., Caputo, R., Hendon, C. H., Yang, R. X., Walsh, A., & Kovalenko, M. V. (2015) · Nano Letters · doi:10.1021/nl5048779 · Cited by 9,209
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
Eperon, G. E., Stranks, S. D., Menelaou, C., Johnston, M. B., Herz, L. M., & Snaith, H. J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43822h · Cited by 4,140
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells
McMeekin, D. P., Sadoughi, G., Rehman, W., Eperon, G. E., Saliba, M., Hörantner, M. T., Haghighirad, A., Sakai, N., Korte, L., Rech, B., et al. (2016) · Science · doi:10.1126/science.aad5845 · Cited by 3,067
Quantum dot–induced phase stabilization of α-CsPbI 3 perovskite for high-efficiency photovoltaics
Swarnkar, A., Marshall, A. R., Sanehira, E. M., Chernomordik, B. D., Moore, D. T., Christians, J. A., Chakrabarti, T., & Luther, J. M. (2016) · Science · doi:10.1126/science.aag2700 · Cited by 2,794
Emergence of colloidal quantum-dot light-emitting technologies
Shirasaki, Y., Supran, G. J., Bawendi, M. G., & Bulović, V. (2013) · Nature Photonics · doi:10.1038/nphoton.2012.328 · Cited by 2,635
Li, Z., Yang, M., Park, J.-S., Wei, S.-H., Berry, J. J., & Zhu, K. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04107 · Cited by 2,269
Perovskite solar cells: an emerging photovoltaic technology
Park, N.-G. (2015) · Materials Today · doi:10.1016/j.mattod.2014.07.007 · Cited by 2,097
Tabulated values of the Shockley–Queisser limit for single junction solar cells
Rühle, S. (2016) · Solar Energy · doi:10.1016/j.solener.2016.02.015 · Cited by 2,047
Inorganic caesium lead iodide perovskite solar cells
Eperon, G. E., Paternò, G. M., Sutton, R. J., Zampetti, A., Haghighirad, A. A., Cacialli, F., & Snaith, H. J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta06398a · Cited by 1,852
New tolerance factor to predict the stability of perovskite oxides and halides
Bartel, C. J., Sutton, C., Goldsmith, B. R., Ouyang, R., Musgrave, C. B., Ghiringhelli, L. M., & Scheffler, M. (2019) · Science Advances · doi:10.1126/sciadv.aav0693 · Cited by 1,838
Khenkin, M. V., Katz, E. A., Abate, A., Bardizza, G., Berry, J. J., Brabec, C., Brunetti, F., Bulović, V., Burlingame, Q., Di Carlo, A., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0529-5 · Cited by 1,803
Formamidinium and Cesium Hybridization for Photo‐ and Moisture‐Stable Perovskite Solar Cell
Lee, J., Kim, D., Kim, H., Seo, S., Cho, S. M., & Park, N. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501310 · Cited by 1,663
Chiba, T., Hayashi, Y., Ebe, H., Hoshi, K., Sato, J., Sato, S., Pu, Y.-J., Ohisa, S., & Kido, J. (2018) · Nature Photonics · doi:10.1038/s41566-018-0260-y · Cited by 1,406
Amat, A., Mosconi, E., Ronca, E., Quarti, C., Umari, P., Nazeeruddin, M. K., Grätzel, M., & De Angelis, F. (2014) · Nano Letters · doi:10.1021/nl5012992 · Cited by 1,285
Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide
Min, H., Kim, M., Lee, S.-U., Kim, H., Kim, G., Choi, K., Lee, J. H., & Seok, S. I. (2019) · Science · doi:10.1126/science.aay7044 · Cited by 1,268
Thermodynamically stabilized β-CsPbI 3 –based perovskite solar cells with efficiencies >18%
Wang, Y., Dar, M. I., Ono, L. K., Zhang, T., Kan, M., Li, Y., Zhang, L., Wang, X., Yang, Y., Gao, X., et al. (2019) · Science · doi:10.1126/science.aav8680 · Cited by 1,249
Li, X., Ibrahim Dar, M., Yi, C., Luo, J., Tschumi, M., Zakeeruddin, S. M., Nazeeruddin, M. K., Han, H., & Grätzel, M. (2015) · Nature Chemistry · doi:10.1038/nchem.2324 · Cited by 1,183
Under the spotlight: The organic–inorganic hybrid halide perovskite for optoelectronic applications
Chen, Q., De Marco, N., Yang, Y. (., Song, T.-B., Chen, C.-C., Zhao, H., Hong, Z., Zhou, H., & Yang, Y. (2015) · Nano Today · doi:10.1016/j.nantod.2015.04.009 · Cited by 1,154
Triple-halide wide–band gap perovskites with suppressed phase segregation for efficient tandems
Xu, J., Boyd, C. C., Yu, Z. J., Palmstrom, A. F., Witter, D. J., Larson, B. W., France, R. M., Werner, J., Harvey, S. P., Wolf, E. J., et al. (2020) · Science · doi:10.1126/science.aaz5074 · Cited by 1,080
Methylammonium-free, high-performance, and stable perovskite solar cells on a planar architecture
Turren-Cruz, S.-H., Hagfeldt, A., & Saliba, M. (2018) · Science · doi:10.1126/science.aat3583 · Cited by 1,055
Strain engineering in perovskite solar cells and its impacts on carrier dynamics
Zhu, C., Niu, X., Fu, Y., Li, N., Hu, C., Chen, Y., He, X., Na, G., Liu, P., Zai, H., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08507-4 · Cited by 1,042
Dimensional tailoring of hybrid perovskites for photovoltaics
Grancini, G., & Nazeeruddin, M. K. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0065-0 · Cited by 978
Zhao, J., Deng, Y., Wei, H., Zheng, X., Yu, Z., Shao, Y., Shield, J. E., & Huang, J. (2017) · Science Advances · doi:10.1126/sciadv.aao5616 · Cited by 974
Liu, F., Zhang, Y., Ding, C., Kobayashi, S., Izuishi, T., Nakazawa, N., Toyoda, T., Ohta, T., Hayase, S., Minemoto, T., et al. (2017) · ACS Nano · doi:10.1021/acsnano.7b05442 · Cited by 960
Prasanna, R., Gold-Parker, A., Leijtens, T., Conings, B., Babayigit, A., Boyen, H.-G., Toney, M. F., & McGehee, M. D. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b04981 · Cited by 893
The Renaissance of Halide Perovskites and Their Evolution as Emerging Semiconductors
Stoumpos, C. C., & Kanatzidis, M. G. (2015) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00229 · Cited by 820
Koh, T. M., Fu, K., Fang, Y., Chen, S., Sum, T. C., Mathews, N., Mhaisalkar, S. G., Boix, P. P., & Baikie, T. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp411112k · Cited by 790
Chemical stability and instability of inorganic halide perovskites
Zhou, Y., & Zhao, Y. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03559h · Cited by 784
Marronnier, A., Roma, G., Boyer-Richard, S., Pedesseau, L., Jancu, J.-M., Bonnassieux, Y., Katan, C., Stoumpos, C. C., Kanatzidis, M. G., & Even, J. (2018) · ACS Nano · doi:10.1021/acsnano.8b00267 · Cited by 753
2D perovskite stabilized phase-pure formamidinium perovskite solar cells
Lee, J.-W., Dai, Z., Han, T.-H., Choi, C., Chang, S.-Y., Lee, S.-J., De Marco, N., Zhao, H., Sun, P., Huang, Y., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05454-4 · Cited by 746
Thermal unequilibrium of strained black CsPbI 3 thin films
Steele, J. A., Jin, H., Dovgaliuk, I., Berger, R. F., Braeckevelt, T., Yuan, H., Martin, C., Solano, E., Lejaeghere, K., Rogge, S. M. J., et al. (2019) · Science · doi:10.1126/science.aax3878 · Cited by 661
Hao, M., Bai, Y., Zeiske, S., Ren, L., Liu, J., Yuan, Y., Zarrabi, N., Cheng, N., Ghasemi, M., Chen, P., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0535-7 · Cited by 587
Thermal Behavior of Methylammonium Lead-Trihalide Perovskite Photovoltaic Light Harvesters
Dualeh, A., Gao, P., Seok, S. I., Nazeeruddin, M. K., & Grätzel, M. (2014) · Chemistry of Materials · doi:10.1021/cm502468k · Cited by 574
Wang, Q., Zheng, X., Deng, Y., Zhao, J., Chen, Z., & Huang, J. (2017) · Joule · doi:10.1016/j.joule.2017.07.017 · Cited by 544
Protesescu, L., Yakunin, S., Kumar, S., Bär, J., Bertolotti, F., Masciocchi, N., Guagliardi, A., Grotevent, M., Shorubalko, I., Bodnarchuk, M. I., et al. (2017) · ACS Nano · doi:10.1021/acsnano.7b00116 · Cited by 534
Jodlowski, A. D., Roldán-Carmona, C., Grancini, G., Salado, M., Ralaiarisoa, M., Ahmad, S., Koch, N., Camacho, L., de Miguel, G., & Nazeeruddin, M. K. (2017) · Nature Energy · doi:10.1038/s41560-017-0054-3 · Cited by 533
Engineering Stress in Perovskite Solar Cells to Improve Stability
Rolston, N., Bush, K. A., Printz, A. D., Gold‐Parker, A., Ding, Y., Toney, M. F., McGehee, M. D., & Dauskardt, R. H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802139 · Cited by 516
Lattice strain causes non-radiative losses in halide perovskites
Jones, T. W., Osherov, A., Alsari, M., Sponseller, M., Duck, B. C., Jung, Y.-K., Settens, C., Niroui, F., Brenes, R., Stan, C. V., et al. (2019) · Energy & Environmental Science · doi:10.1039/c8ee02751j · Cited by 508
Improved Phase Stability of Formamidinium Lead Triiodide Perovskite by Strain Relaxation
Zheng, X., Wu, C., Jha, S. K., Li, Z., Zhu, K., & Priya, S. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00457 · Cited by 474
Bodnarchuk, M. I., Boehme, S. C., ten Brinck, S., Bernasconi, C., Shynkarenko, Y., Krieg, F., Widmer, R., Aeschlimann, B., Günther, D., Kovalenko, M. V., et al. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01669 · Cited by 466
Recent Progress on the Long‐Term Stability of Perovskite Solar Cells
Fu, Q., Tang, X., Huang, B., Hu, T., Tan, L., Chen, L., & Chen, Y. (2018) · Advanced Science · doi:10.1002/advs.201700387 · Cited by 454
Efficient perovskite solar cells by metal ion doping
Wang, J. T.-W., Wang, Z., Pathak, S., Zhang, W., deQuilettes, D. W., Wisnivesky-Rocca-Rivarola, F., Huang, J., Nayak, P. K., Patel, J. B., Mohd Yusof, H. A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01969b · Cited by 450
Dunfield, S. P., Bliss, L., Zhang, F., Luther, J. M., Zhu, K., van Hest, M. F. A. M., Reese, M. O., & Berry, J. J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201904054 · Cited by 435
Thermodynamically Stable Orthorhombic γ-CsPbI3 Thin Films for High-Performance Photovoltaics
Zhao, B., Jin, S.-F., Huang, S., Liu, N., Ma, J.-Y., Xue, D.-J., Han, Q., Ding, J., Ge, Q.-Q., Feng, Y., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b06050 · Cited by 380
Zhao, Q., Hazarika, A., Schelhas, L. T., Liu, J., Gaulding, E. A., Li, G., Zhang, M., Toney, M. F., Sercel, P. C., & Luther, J. M. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.9b02395 · Cited by 308
Surface Ligand Management for Stable FAPbI3 Perovskite Quantum Dot Solar Cells
Xue, J., Lee, J.-W., Dai, Z., Wang, R., Nuryyeva, S., Liao, M. E., Chang, S.-Y., Meng, L., Meng, D., Sun, P., et al. (2018) · Joule · doi:10.1016/j.joule.2018.07.018 · Cited by 294
Lattice anchoring stabilizes solution-processed semiconductors
Liu, M., Chen, Y., Tan, C.-S., Quintero-Bermudez, R., Proppe, A. H., Munir, R., Tan, H., Voznyy, O., Scheffel, B., Walters, G., et al. (2019) · Nature · doi:10.1038/s41586-019-1239-7 · Cited by 294
High Chloride Doping Levels Stabilize the Perovskite Phase of Cesium Lead Iodide
Dastidar, S., Egger, D. A., Tan, L. Z., Cromer, S. B., Dillon, A. D., Liu, S., Kronik, L., Rappe, A. M., & Fafarman, A. T. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b00635 · Cited by 290
Li, F., Zhou, S., Yuan, J., Qin, C., Yang, Y., Shi, J., Ling, X., Li, Y., & Ma, W. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b01920 · Cited by 278
Waleed, A., Tavakoli, M. M., Gu, L., Hussain, S., Zhang, D., Poddar, S., Wang, Z., Zhang, R., & Fan, Z. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b02101 · Cited by 262
Stabilization of the Metastable Lead Iodide Perovskite Phase via Surface Functionalization
Fu, Y., Wu, T., Wang, J., Zhai, J., Shearer, M. J., Zhao, Y., Hamers, R. J., Kan, E., Deng, K., Zhu, X.-Y., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b01500 · Cited by 247
Chen, K., Jin, W., Zhang, Y., Yang, T., Reiss, P., Zhong, Q., Bach, U., Li, Q., Wang, Y., Zhang, H., et al. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.9b10700 · Cited by 213
Fu, Y., Rea, M. T., Chen, J., Morrow, D. J., Hautzinger, M. P., Zhao, Y., Pan, D., Manger, L. H., Wright, J. C., Goldsmith, R. H., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02948 · Cited by 207
Zhang, Y., Seo, S., Lim, S. Y., Kim, Y., Kim, S.-G., Lee, D.-K., Lee, S.-H., Shin, H., Cheong, H., & Park, N.-G. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.9b02348 · Cited by 193
Fabini, D. H., Stoumpos, C. C., Laurita, G., Kaltzoglou, A., Kontos, A. G., Falaras, P., Kanatzidis, M. G., & Seshadri, R. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201609538 · Cited by 188
Stable and High‐Efficiency Methylammonium‐Free Perovskite Solar Cells
Gao, X., Luo, W., Zhang, Y., Hu, R., Zhang, B., Züttel, A., Feng, Y., & Nazeeruddin, M. K. (2020) · Advanced Materials · doi:10.1002/adma.201905502 · Cited by 179
Octahedral tilting instabilities in inorganic halide perovskites
Bechtel, J. S., & der Ven, A. V. (2018) · Physical Review Materials · doi:10.1103/physrevmaterials.2.025401 · Cited by 134
Masi, S., Echeverría‐Arrondo, C., Salim, K. M. M., Ngo, T. T., Méndez, P. F., López-Fraguas, E., Macías-Pinilla, D. F., Planelles, J., Climente, J. I., & Mora‐Seró, I. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.9b02450 · Cited by 122
Self-citationGlobularity‐Selected Large Molecules for a New Generation of Multication Perovskites
Gholipour, S., Ali, A. M., Correa‐Baena, J., Turren‐Cruz, S., Tajabadi, F., Tress, W., Taghavinia, N., Grätzel, M., Abate, A., Angelis, F. D., et al. (2017) · Advanced Materials · doi:10.1002/adma.201702005 · Cited by 100
Ma, S., Kim, S. H., Jeong, B., et al. (2019) · Small · doi:10.1002/smll.201900219 · Cited by 96
Zhang, Y., Kim, S., Lee, D. K., & Park, N. (2018) · ChemSusChem · doi:10.1002/cssc.201800610 · Cited by 88
Polyelemental, Multicomponent Perovskite Semiconductor Libraries through Combinatorial Screening
Saliba, M. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803754 · Cited by 88
Gualdrón‐Reyes, A. F., Rodríguez‐Pereira, J., Amado-Gonzaléz, E., Rueda-P, J.-E., Ospina, R., Masi, S., Yoon, S. J., Tirado, J., Jaramillo, F., Agouram, S., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b19374 · Cited by 82
Self-citationGu, L., Zhang, D., Kam, M., Zhang, Q., Poddar, S., Fu, Y., Mo, X., & Fan, Z. (2018) · Nanoscale · doi:10.1039/c8nr03058h · Cited by 81
Review of Stability Enhancement for Formamidinium‐Based Perovskites
Fan, Y., Meng, H., Wang, L., & Pang, S. (2019) · Solar RRL · doi:10.1002/solr.201900215 · Cited by 78
Boopathi, K. M., Martín‐García, B., Ray, A., Pina, J. M., Marras, S., Saidaminov, M. I., Bonaccorso, F., Stasio, F. D., Sargent, E. H., Manna, L., et al. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.9b02810 · Cited by 76
New Metallic Ordered Phase of Perovskite CsPbI 3 under Pressure
Liang, Y., Huang, X., Huang, Y., Wang, X., Li, F., Wang, Y., Tian, F., Liu, B., Shen, Z., & Cui, T. S. (2019) · Advanced Science · doi:10.1002/advs.201900399 · Cited by 73
Highly efficient and rapid manufactured perovskite solar cells via Flash InfraRed Annealing
Sánchez, S., Jerónimo-Rendon, J. J., Saliba, M., & Hagfeldt, A. (2019) · Materials Today · doi:10.1016/j.mattod.2019.11.003 · Cited by 52
Ngo, T. T., Masi, S., Méndez, P. F., Kazes, M., Oron, D., & Mora‐Seró, I. (2019) · Nanoscale Advances · doi:10.1039/c9na00475k · Cited by 50
Self-citationRodríguez‐Romero, J., Sánchez‐Díaz, J., Echeverría‐Arrondo, C., Masi, S., Esparza, D., Barea, E. M., & Mora‐Seró, I. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.9b02755 · Cited by 47
Self-citationPolyelemental, Multicomponent Perovskite Semiconductor Libraries through Combinatorial Screening
Saliba, M. (2019) · nanoGe Fall Meeting · doi:10.29363/nanoge.ngfm.2019.264 · Cited by 47
Cited by
State of the Art and Prospects for Halide Perovskite Nanocrystals
Dey, A., Ye, J., De, A., Debroye, E., Ha, S. K., Bladt, E., Kshirsagar, A. S., Wang, Z., Yin, J., Wang, Y., et al. (2021) · ACS Nano · doi:10.1021/acsnano.0c08903 · Cited by 1,478
Self-citationLigand Chemistry of Inorganic Lead Halide Perovskite Nanocrystals
Fiuza-Maneiro, N., Sun, K., López-Fernández, I., Gómez-Graña, S., Müller-Buschbaum, P., & Polavarapu, L. (2023) · ACS Energy Letters · doi:10.1021/acsenergylett.2c02363 · Cited by 388
Pushing commercialization of perovskite solar cells by improving their intrinsic stability
Cheng, Y., & Ding, L. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00493j · Cited by 306
Kim, S., Jang, J. H., Wu, Z., Lee, M. J., Woo, H. Y., & Hwang, I. (2021) · Small · doi:10.1002/smll.202101839 · Cited by 36
Metadata
- Authors
- Masi, S., Gualdrón-Reyes, A. F., & Mora-Seró, I.
- Venue
- ACS Energy Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-05-15
- Volume
- 5
- Issue
- 6
- Pages
- 1974-1985
- ISSN
- 2380-8195 (ISSN-L)
- OpenAlex
- W3024844340
- Cited by
- 347
- References
- 75
- FWCI
- 16.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.