Influence of Electrode Interfaces on the Stability of Perovskite Solar Cells: Reduced Degradation Using MoOx/Al for Hole Collection
The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Abstract
We investigated and characterized the stability of the power output from methylammonium lead iodide perovskite photovoltaic devices produced with various hole-collecting anode configurations consisting of Au, Ag, MoO x /Au, MoO x /Ag, and MoO x /Al. The unencapsulated devices were operated under constant illumination and constant load conditions in laboratory ambient with periodic current–voltage testing. Although the initial efficiencies of devices were comparable across these configurations, the stability of these devices varied significantly due to subtle differences in the electrode structure. Specifically, we found that devices with MoO x /Al electrodes are more stable than devices with more conventional, and more costly, Au and Ag electrodes. We demonstrate that a thin MoO x layer inhibits decomposition of the perovskite films under illumination in ambient laboratory conditions and greater improvements in device stability are achieved specifically with MoO x /Al electrodes. We investigated the role of the MoO x interlayer in the MoO x /Al electrodes by exploring the effect of relative humidity and the MoO x interlayer thickness on the perovskite solar cell stability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
Mei, A., Li, X., Liu, L., Ku, Z., Liu, T., Rong, Y., Xu, M., Hu, M., Chen, J., Yang, Y., et al. (2014) · Science · doi:10.1126/science.1254763 · Cited by 3,043
Shao, Y., Xiao, Z., Bi, C., Yuan, Y., & Huang, J. (2014) · Nature Communications · doi:10.1038/ncomms6784 · Cited by 3,025
De Wolf, S., Holovsky, J., Moon, S.-J., Löper, P., Niesen, B., Ledinsky, M., Haug, F.-J., Yum, J.-H., & Ballif, C. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500279b · Cited by 2,851
Unusual defect physics in CH3NH3PbI3 perovskite solar cell absorber
Yin, W.-J., Shi, T., & Yan, Y. (2014) · Applied Physics Letters · doi:10.1063/1.4864778 · Cited by 2,707
Ahn, N., Son, D.-Y., Jang, I.-H., Kang, S. M., Choi, M., & Park, N.-G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04930 · Cited by 2,312
Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite
Conings, B., Drijkoningen, J., Gauquelin, N., Babayigit, A., D'Haen, J., D'Olieslaeger, L., Ethirajan, A., Verbeeck, J., Manca, J., Mosconi, E., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500477 · Cited by 2,234
Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers
You, J., Meng, L., Song, T.-B., Guo, T.-F., Yang, Y. (., Chang, W.-H., Hong, Z., Chen, H., Zhou, H., Chen, Q., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2015.230 · Cited by 2,123
Review of recent progress in chemical stability of perovskite solar cells
Niu, G., Guo, X., & Wang, L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04994b · Cited by 1,965
Leijtens, T., Eperon, G. E., Pathak, S., Abate, A., Lee, M. M., & Snaith, H. J. (2013) · Nature Communications · doi:10.1038/ncomms3885 · Cited by 1,867
Noel, N. K., Abate, A., Stranks, S. D., Parrott, E. S., Burlakov, V. M., Goriely, A., & Snaith, H. J. (2014) · ACS Nano · doi:10.1021/nn5036476 · Cited by 1,709
Formamidinium and Cesium Hybridization for Photo‐ and Moisture‐Stable Perovskite Solar Cell
Lee, J., Kim, D., Kim, H., Seo, S., Cho, S. M., & Park, N. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501310 · Cited by 1,663
Perovskite Solar Cells: From Materials to Devices
Jung, H. S., & Park, N. (2015) · Small · doi:10.1002/smll.201402767 · Cited by 1,587
Christians, J. A., Miranda Herrera, P. A., & Kamat, P. V. (2015) · Journal of the American Chemical Society · doi:10.1021/ja511132a · Cited by 1,367
Yang, J., Siempelkamp, B. D., Liu, D., & Kelly, T. L. (2015) · ACS Nano · doi:10.1021/nn506864k · Cited by 1,351
Stability of Metal Halide Perovskite Solar Cells
Leijtens, T., Eperon, G. E., Noel, N. K., Habisreutinger, S. N., Petrozza, A., & Snaith, H. J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500963 · Cited by 1,308
Ponseca, C. S., Savenije, T. J., Abdellah, M., Zheng, K., Yartsev, A., Pascher, T., Harlang, T., Chabera, P., Pullerits, T., Stepanov, A., et al. (2014) · Journal of the American Chemical Society · doi:10.1021/ja412583t · Cited by 1,257
Transition Metal Oxides for Organic Electronics: Energetics, Device Physics and Applications
Meyer, J., Hamwi, S., Kröger, M., Kowalsky, W., Riedl, T., & Kahn, A. (2012) · Advanced Materials · doi:10.1002/adma.201201630 · Cited by 1,248
Habisreutinger, S. N., Leijtens, T., Eperon, G. E., Stranks, S. D., Nicholas, R. J., & Snaith, H. J. (2014) · Nano Letters · doi:10.1021/nl501982b · Cited by 1,210
Li, X., Ibrahim Dar, M., Yi, C., Luo, J., Tschumi, M., Zakeeruddin, S. M., Nazeeruddin, M. K., Han, H., & Grätzel, M. (2015) · Nature Chemistry · doi:10.1038/nchem.2324 · Cited by 1,183
Niu, G., Li, W., Meng, F., Wang, L., Dong, H., & Qiu, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta13606j · Cited by 1,075
Transition metal oxides as the buffer layer for polymer photovoltaic cells
Shrotriya, V., Li, G., Yao, Y., Chu, C.-W., & Yang, Y. (2006) · Applied Physics Letters · doi:10.1063/1.2174093 · Cited by 1,035
Han, Y., Meyer, S., Dkhissi, Y., Weber, K., Pringle, J. M., Bach, U., Spiccia, L., & Cheng, Y.-B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00358j · Cited by 1,002
Stability of perovskite solar cells
Wang, D., Wright, M., Elumalai, N. K., & Uddin, A. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.12.025 · Cited by 998
Consensus stability testing protocols for organic photovoltaic materials and devices
Reese, M. O., Gevorgyan, S. A., Jørgensen, M., Bundgaard, E., Kurtz, S. R., Ginley, D. S., Olson, D. C., Lloyd, M. T., Morvillo, P., Katz, E. A., et al. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.01.036 · Cited by 989
Self-citationThe Role of Oxygen in the Degradation of Methylammonium Lead Trihalide Perovskite Photoactive Layers
Aristidou, N., Sanchez‐Molina, I., Chotchuangchutchaval, T., Brown, M., Martinez, L., Rath, T., & Haque, S. A. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201503153 · Cited by 969
Zhang, W., Saliba, M., Moore, D. T., Pathak, S. K., Hörantner, M. T., Stergiopoulos, T., Stranks, S. D., Eperon, G. E., Alexander-Webber, J. A., Abate, A., et al. (2015) · Nature Communications · doi:10.1038/ncomms7142 · Cited by 920
The Role of Intrinsic Defects in Methylammonium Lead Iodide Perovskite
Kim, J., Lee, S.-H., Lee, J. H., & Hong, K.-H. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500370k · Cited by 906
Supramolecular Halogen Bond Passivation of Organic–Inorganic Halide Perovskite Solar Cells
Abate, A., Saliba, M., Hollman, D. J., Stranks, S. D., Wojciechowski, K., Avolio, R., Grancini, G., Petrozza, A., & Snaith, H. J. (2014) · Nano Letters · doi:10.1021/nl500627x · Cited by 774
Misra, R. K., Aharon, S., Li, B., Mogilyansky, D., Visoly-Fisher, I., Etgar, L., & Katz, E. A. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502642b · Cited by 552
Interfacial Degradation of Planar Lead Halide Perovskite Solar Cells
Guerrero, A., You, J., Aranda, C., Kang, Y. S., Garcia-Belmonte, G., Zhou, H., Bisquert, J., & Yang, Y. (2016) · ACS Nano · doi:10.1021/acsnano.5b03687 · Cited by 520
Beyond Efficiency: the Challenge of Stability in Mesoscopic Perovskite Solar Cells
Rong, Y., Liu, L., Mei, A., Li, X., & Han, H. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501066 · Cited by 473
Vasilopoulou, M., Douvas, A. M., Georgiadou, D. G., Palilis, L. C., Kennou, S., Sygellou, L., Soultati, A., Kostis, I., Papadimitropoulos, G., Davazoglou, D., et al. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3026906 · Cited by 418
Ultra-thin high efficiency semitransparent perovskite solar cells
Della Gaspera, E., Peng, Y., Hou, Q., Spiccia, L., Bach, U., Jasieniak, J. J., & Cheng, Y.-B. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.02.028 · Cited by 390
Improving the Long-Term Stability of Perovskite Solar Cells with a Porous Al2O3 Buffer Layer
Guarnera, S., Abate, A., Zhang, W., Foster, J. M., Richardson, G., Petrozza, A., & Snaith, H. J. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502703p · Cited by 381
Kim, J. H., Williams, S. T., Cho, N., Chueh, C., & Jen, A. K. ‐. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401229 · Cited by 366
Dong, X., Fang, X., Lv, M., Lin, B., Zhang, S., Ding, J., & Yuan, N. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06128d · Cited by 341
Achieving long-term stable perovskite solar cells via ion neutralization
Back, H., Kim, G., Kim, J., Kong, J., Kim, T. K., Kang, H., Kim, H., Lee, J., Lee, S., & Lee, K. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00612d · Cited by 337
n-Type Transition Metal Oxide as a Hole Extraction Layer in PbS Quantum Dot Solar Cells
Gao, J., Perkins, C. L., Luther, J. M., Hanna, M. C., Chen, H.-Y., Semonin, O. E., Nozik, A. J., Ellingson, R. J., & Beard, M. C. (2011) · Nano Letters · doi:10.1021/nl2015729 · Cited by 288
Self-citationBrown, P. R., Lunt, R. R., Zhao, N., Osedach, T. P., Wanger, D. D., Chang, L.-Y., Bawendi, M. G., & Bulović, V. (2011) · Nano Letters · doi:10.1021/nl201472u · Cited by 279
Zheng, L., Chung, Y.-H., Ma, Y., Zhang, L., Xiao, L., Chen, Z., Wang, S., Qu, B., & Gong, Q. (2014) · Chem. Commun. · doi:10.1039/c4cc04680c · Cited by 275
Epitaxial growth and properties of MoOx(2<x<2.75) films
Bhosle, V., Tiwari, A., & Narayan, J. (2005) · Journal of Applied Physics · doi:10.1063/1.1868852 · Cited by 148
Evaluation of moisture ingress from the perimeter of photovoltaic modules
Kempe, M., Dameron, A. A., & Reese, M. O. (2013) · Progress in Photovoltaics Research and Applications · doi:10.1002/pip.2374 · Cited by 111
Self-citation
Cited by
Understanding Degradation Mechanisms and Improving Stability of Perovskite Photovoltaics
Boyd, C. C., Cheacharoen, R., Leijtens, T., & McGehee, M. D. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00336 · Cited by 1,777
A Review of Perovskites Solar Cell Stability
Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808843 · Cited by 1,310
Towards stable and commercially available perovskite solar cells
Park, N.-G., Grätzel, M., Miyasaka, T., Zhu, K., & Emery, K. (2016) · Nature Energy · doi:10.1038/nenergy.2016.152 · Cited by 1,182
Self-citationScalable fabrication of perovskite solar cells
Li, Z., Klein, T. R., Kim, D. H., Yang, M., Berry, J. J., van Hest, M. F. A. M., & Zhu, K. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.17 · Cited by 1,166
Self-citationTailored interfaces of unencapsulated perovskite solar cells for >1,000 hour operational stability
Christians, J. A., Schulz, P., Tinkham, J. S., Schloemer, T. H., Harvey, S. P., Tremolet de Villers, B. J., Sellinger, A., Berry, J. J., & Luther, J. M. (2018) · Nature Energy · doi:10.1038/s41560-017-0067-y · Cited by 828
Self-citation
Metadata
- Authors
- Sanehira, E. M., Tremolet de Villers, B. J., Schulz, P., Reese, M. O., Ferrere, S., Zhu, K., Lin, L. Y., Berry, J. J., & Luther, J. M.
- Venue
- ACS Energy Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-04-19
- Volume
- 1
- Issue
- 1
- Pages
- 38-45
- ISSN
- 2380-8195 (ISSN-L)
- OpenAlex
- W2336455545
- Cited by
- 285
- References
- 47
- FWCI
- 19.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.