The DOI matches its Crossref record; 109 of the 109 references it cites were found in a registry or an index.
Nickel-Rich Layered Cathode Materials for Automotive Lithium-Ion Batteries: Achievements and Perspectives
Abstract
Future generations of electric vehicles require driving ranges of at least 300 miles to successfully penetrate the mass consumer market. A significant improvement in the energy density of lithium batteries is mandatory while also maintaining similar or improved rate capability, lifetime, cost, and safety. The vast majority of electric vehicles that will appear on the market in the next 10 years will employ nickel-rich cathode materials, LiNi 1– x – y Co x Al y O 2 and LiNi 1– x – y Co x Mn y O 2 ( x + y < 0.2), in particular. Here, the potential and limitations of these cathode materials are critically compared with reference to realistic target values from the automotive industry. Moreover, we show how future automotive targets can be achieved through fine control of the structural and microstructural properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lithium Batteries and Cathode Materials
Whittingham, M. S. (2004) · Chemical Reviews · doi:10.1021/cr020731c · Cited by 6,267
Cabana, J., Monconduit, L., Larcher, D., & Palacín, M. R. (2010) · Advanced Materials · doi:10.1002/adma.201000717 · Cited by 2,361
Noh, H.-J., Youn, S., Yoon, C. S., & Sun, Y.-K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.063 · Cited by 2,302
Self-citationLi2MnO3-stabilized LiMO2 (M = Mn, Ni, Co) electrodes for lithium-ion batteries
Thackeray, M. M., Kang, S.-H., Johnson, C. S., Vaughey, J. T., Benedek, R., & Hackney, S. A. (2007) · Journal of Materials Chemistry · doi:10.1039/b702425h · Cited by 2,039
McDowell, M. T., Lee, S. W., Nix, W. D., & Cui, Y. (2013) · Advanced Materials · doi:10.1002/adma.201301795 · Cited by 1,670
High-energy cathode material for long-life and safe lithium batteries
Sun, Y.-K., Myung, S.-T., Park, B.-C., Prakash, J., Belharouak, I., & Amine, K. (2009) · Nature Materials · doi:10.1038/nmat2418 · Cited by 1,519
Self-citationLin, F., Markus, I. M., Nordlund, D., Weng, T.-C., Asta, M. D., Xin, H. L., & Doeff, M. M. (2014) · Nature Communications · doi:10.1038/ncomms4529 · Cited by 1,481
Layered Lithium Insertion Material of LiCo1/3Ni1/3Mn1/3O2 for Lithium-Ion Batteries
Ohzuku, T., & Makimura, Y. (2001) · Chemistry Letters · doi:10.1246/cl.2001.642 · Cited by 1,388
Electrochemistry and Structural Chemistry of LiNiO2 (R3m) for 4 Volt Secondary Lithium Cells
Ohzuku, T., Ueda, A., & Nagayama, M. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2220730 · Cited by 1,384
Masquelier, C., & Croguennec, L. (2013) · Chemical Reviews · doi:10.1021/cr3001862 · Cited by 1,210
Safety mechanisms in lithium-ion batteries
Balakrishnan, P. G., Ramesh, R., & Prem Kumar, T. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.12.002 · Cited by 1,132
Nanostructured high-energy cathode materials for advanced lithium batteries
Sun, Y.-K., Chen, Z., Noh, H.-J., Lee, D.-J., Jung, H.-G., Ren, Y., Wang, S., Yoon, C. S., Myung, S.-T., & Amine, K. (2012) · Nature Materials · doi:10.1038/nmat3435 · Cited by 1,093
Self-citationBak, S.-M., Hu, E., Zhou, Y., Yu, X., Senanayake, S. D., Cho, S.-J., Kim, K.-B., Chung, K. Y., Yang, X.-Q., & Nam, K.-W. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am506712c · Cited by 1,010
Identification of cathode materials for lithium batteries guided by first-principles calculations
Ceder, G., Chiang, Y.-M., Sadoway, D. R., Aydinol, M. K., Jang, Y.-I., & Huang, B. (1998) · Nature · doi:10.1038/33647 · Cited by 841
Structure and electrochemistry of Li1±yNiO2 and a new Li2NiO2 phase with the Ni (OH)2 structure
Dahn, J. (1990) · Solid State Ionics · doi:10.1016/0167-2738(90)90049-w · Cited by 806
Future generations of cathode materials: an automotive industry perspective
Andre, D., Kim, S.-J., Lamp, P., Lux, S. F., Maglia, F., Paschos, O., & Stiaszny, B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00361j · Cited by 806
Self-citationHigher, Stronger, Better…︁ A Review of 5 Volt Cathode Materials for Advanced Lithium‐Ion Batteries
Kraytsberg, A., & Ein‐Eli, Y. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200068 · Cited by 698
Surface Characterization of Electrodes from High Power Lithium-Ion Batteries
Andersson, A. M., Abraham, D. P., Haasch, R., MacLaren, S., Liu, J., & Amine, K. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1505636 · Cited by 686
Role of surface coating on cathode materials for lithium-ion batteries
Chen, Z., Qin, Y., Amine, K., & Sun, Y.-K. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00154f · Cited by 672
Self-citationNovel LiCoO2 Cathode Material with Al2O3 Coating for a Li Ion Cell
Cho, J., Kim, Y. J., & Park, B. (2000) · Chemistry of Materials · doi:10.1021/cm000511k · Cited by 651
Rechargeable LiNiO2 / Carbon Cells
Dahn, J. R., von Sacken, U., Juzkow, M. W., & Al‐Janaby, H. (1991) · Journal of The Electrochemical Society · doi:10.1149/1.2085950 · Cited by 639
Shim, J. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00363-4 · Cited by 519
Wang, J., Purewal, J., Liu, P., Hicks-Garner, J., Soukazian, S., Sherman, E., Sorenson, A., Vu, L., Tataria, H., & Verbrugge, M. W. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.030 · Cited by 514
Sun, Y., Myung, S., Kim, M., Prakash, J., & Amine, K. (2005) · Journal of the American Chemical Society · doi:10.1021/ja053675g · Cited by 476
Self-citationWatanabe, S., Kinoshita, M., Hosokawa, T., Morigaki, K., & Nakura, K. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.018 · Cited by 465
Ohzuku, T., Ueda, A., & Kouguchi, M. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2048458 · Cited by 445
Zheng, H., Sun, Q., Liu, G., Song, X., & Battaglia, V. S. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.01.122 · Cited by 433
Miller, D. J., Proff, C., Wen, J., Abraham, D. P., & Bareño, J. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300015 · Cited by 422
Yabuuchi, N., Makimura, Y., & Ohzuku, T. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2455585 · Cited by 387
Electronic Conductivity of LiCoO2 and Its Enhancement by Magnesium Doping
Tukamoto, H., & West, A. R. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837976 · Cited by 382
Structure and Electrochemistry of Li[Ni[sub x]Co[sub 1−2x]Mn[sub x]]O[sub 2] (0≤x≤1/2)
MacNeil, D. D., Lu, Z., & Dahn, J. R. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1505633 · Cited by 381
Effect of Ni2+ Content on Lithium/Nickel Disorder for Ni-Rich Cathode Materials
Wu, F., Tian, J., Su, Y., Wang, J., Zhang, C., Bao, L., He, T., Li, J., & Chen, S. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00645 · Cited by 369
Synthesis and structural characterization of the normal spinel Li[Ni2]O4
Thomas, M. G. S. R., David, W. I. F., Goodenough, J. B., & Groves, P. (1985) · Materials Research Bulletin · doi:10.1016/0025-5408(85)90087-x · Cited by 365
Jo, C., Cho, D.-H., Noh, H.-J., Yashiro, H., Sun, Y., & Myung, S. (2014) · Nano Research · doi:10.1007/s12274-014-0631-8 · Cited by 359
Self-citationCrystal and electronic structures of superstructural Li1−x[Co1/3Ni1/3Mn1/3]O2 (0≤x≤1)
Koyama, Y., Tanaka, I., Adachi, H., Makimura, Y., & Ohzuku, T. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00194-0 · Cited by 350
Surface changes on LiNi0.8Co0.2O2 particles during testing of high-power lithium-ion cells
Abraham, D. P., Twesten, R. D., Balasubramanian, M., Petrov, I., McBreen, J., & Amine, K. (2002) · Electrochemistry Communications · doi:10.1016/s1388-2481(02)00388-0 · Cited by 312
Li2CO3 in LiNi0.8Co0.15Al0.05O2 cathodes and its effects on capacity and power
Zhuang, G., Chen, G., Shim, J., Song, X., Ross, P. N., & Richardson, T. J. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.02.030 · Cited by 312
Lee, J. H., Yoon, C. S., Hwang, J.-Y., Kim, S.-J., Maglia, F., Lamp, P., Myung, S.-T., & Sun, Y.-K. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01134a · Cited by 310
Self-citationCation distribution and chemical deintercalation of Li1-xNi1+xO2
Morales, J., Pérez-Vicente, C., & Tirado, J. L. (1990) · Materials Research Bulletin · doi:10.1016/0025-5408(90)90028-z · Cited by 306
Cycle aging of commercial NMC/graphite pouch cells at different temperatures
Jalkanen, K., Karppinen, J., Skogström, L., Laurila, T., Nisula, M., & Vuorilehto, K. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.04.110 · Cited by 279
Chen, Z., & Dahn, J. R. (2002) · Electrochemical and Solid-State Letters · doi:10.1149/1.1503202 · Cited by 276
Significant improvement of high voltage cycling behavior AlF3-coated LiCoO2 cathode
SUN, Y., HAN, J., MYUNG, S., LEE, S., & AMINE, K. (2006) · Electrochemistry Communications · doi:10.1016/j.elecom.2006.03.040 · Cited by 273
Self-citationImprovement of long-term cycling performance of Li[Ni0.8Co0.15Al0.05]O2 by AlF3 coating
Lee, S.-H., Yoon, C. S., Amine, K., & Sun, Y.-K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.045 · Cited by 266
Self-citationDiagnostic examination of thermally abused high-power lithium-ion cells
Abraham, D. P., Roth, E. P., Kostecki, R., McCarthy, K., MacLaren, S., & Doughty, D. H. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.04.088 · Cited by 261
Takami, N., Inagaki, H., Tatebayashi, Y., Saruwatari, H., Honda, K., & Egusa, S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.11.055 · Cited by 256
Relationship between non-stoichiometry and physical properties in LiNiO2
Hirano, A., Kanno, R., Kawamoto, Y., Takeda, Y., Yamaura, K., Takano, M., Ohyama, K., Ohashi, M., & Yamaguchi, Y. (1995) · Solid State Ionics · doi:10.1016/0167-2738(95)00005-q · Cited by 253
Aydinol, M. K., Kohan, A. F., & Ceder, G. (1997) · Journal of Power Sources · doi:10.1016/s0378-7753(96)02638-9 · Cited by 250
Effects of Al doping on the microstructure of LiCoO2 cathode materials
Myung, S. (2001) · Solid State Ionics · doi:10.1016/s0167-2738(00)00828-6 · Cited by 242
Self-citationMohanty, D., Dahlberg, K., King, D. M., David, L. A., Sefat, A. S., Wood, D. L., Daniel, C., Dhar, S., Mahajan, V., Lee, M., et al. (2016) · Scientific Reports · doi:10.1038/srep26532 · Cited by 242
Stabilization of the layered crystal structure of LiNiO2 by Co-substitution
Zhecheva, E. N., & Stoyanova, R. K. (1993) · Solid State Ionics · doi:10.1016/0167-2738(93)90037-4 · Cited by 241
Gallus, D. R., Schmitz, R., Wagner, R., Hoffmann, B., Nowak, S., Cekić-Lasković, I., Schmitz, R. W., & Winter, M. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.04.091 · Cited by 239
Abraham, D. P., Twesten, R. D., Balasubramanian, M., Kropf, A. J., Fischer, D. A., McBreen, J., Petrov, I., & Amine, K. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1613291 · Cited by 239
Myung, S.-T., Amine, K., & Sun, Y.-K. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00508h · Cited by 230
Self-citationWatanabe, S., Kinoshita, M., Hosokawa, T., Morigaki, K., & Nakura, K. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.103 · Cited by 224
Rate dependence of swelling in lithium-ion cells
Oh, K.-Y., Siegel, J. B., Secondo, L., Kim, S. U., Samad, N. A., Qin, J., Anderson, D., Garikipati, K., Knobloch, A., Epureanu, B. I., et al. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.039 · Cited by 219
Self-citationCho, J., Kim, T., Kim, J.-S., Noh, M., & Park, B. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1802411 · Cited by 216
Lee, K.-S., Myung, S., Amine, K., Yashiro, H., & Sun, Y. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2769831 · Cited by 212
Self-citationLong cycle life lithium ion battery with lithium nickel cobalt manganese oxide (NCM) cathode
Liu, S., Xiong, L., & He, C. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.03.083 · Cited by 212
Capacity-Fading Mechanisms of LiNiO[sub 2]-Based Lithium-Ion Batteries
Muto, S., Sasano, Y., Tatsumi, K., Sasaki, T., Horibuchi, K., Takeuchi, Y., & Ukyo, Y. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3076137 · Cited by 212
Solid‐State Redox Reactions of LiNi1 / 2Co1 / 2 O 2 ( R 3̄m ) for 4 Volt Secondary Lithium Cells
Ueda, A., & Ohzuku, T. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2055051 · Cited by 204
Rational design of silicon-based composites for high-energy storage devices
Lee, J. K., Oh, C., Kim, N., Hwang, J.-Y., & Sun, Y.-K. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta00265j · Cited by 202
Self-citationElectrochemical and Thermal Behavior of LiNi1 − z M z O 2 ( M = Co , Mn , Ti )
Arai, H., Okada, S., Sakurai, Y., & Yamaki, J. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837968 · Cited by 194
The Reactions of Li[sub 0.5]CoO[sub 2] with Nonaqueous Solvents at Elevated Temperatures
MacNeil, D. D., & Dahn, J. R. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1483865 · Cited by 177
Cherkashinin, G., Motzko, M., Schulz, N., Späth, T., & Jaegermann, W. (2015) · Chemistry of Materials · doi:10.1021/cm5047534 · Cited by 173
Wright, R. B., Christophersen, J. P., Motloch, C. G., Belt, J. R., Ho, C. D., Battaglia, V. S., Barnes, J. A., Duong, T. Q., & Sutula, R. A. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00190-3 · Cited by 169
Kim, H., Lee, E., & Sun, Y. (2014) · Materials Today · doi:10.1016/j.mattod.2014.05.003 · Cited by 169
Self-citationEffect of aluminium doping on cathodic behaviour of LiNi0.7Co0.3O2
Madhavi, S., Rao, G. V. S., Chowdari, B. V. R., & Li, S. F. Y. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00559-0 · Cited by 155
Min, K., Kim, K., Jung, C., Seo, S.-W., Song, Y. Y., Lee, H. S., Shin, J., & Cho, E. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.03.017 · Cited by 155
Chae, C., Noh, H.-J., Lee, J. K., Scrosati, B., & Sun, Y. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303766 · Cited by 152
Self-citationDefect Chemistry in Layered LiMO2 (M = Co, Ni, Mn, and Li1/3Mn2/3) by First-Principles Calculations
Koyama, Y., Arai, H., Tanaka, I., Uchimoto, Y., & Ogumi, Z. (2012) · Chemistry of Materials · doi:10.1021/cm3018314 · Cited by 151
Venkatraman, S., Shin, Y., & Manthiram, A. (2002) · Electrochemical and Solid-State Letters · doi:10.1149/1.1525430 · Cited by 151
Performance degradation of high-power lithium-ion cells—Electrochemistry of harvested electrodes
Abraham, D. P., Knuth, J., Dees, D. W., Bloom, I., & Christophersen, J. P. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.03.071 · Cited by 150
Lim, B., Yoon, S., Park, K., Yoon, C. S., Kim, S., Lee, J. J., & Sun, Y. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201501430 · Cited by 144
Self-citationImproving the Capacity Retention of LiCoO[sub 2] Cycled to 4.5 V by Heat-Treatment
Chen, Z., & Dahn, J. R. (2003) · Electrochemical and Solid-State Letters · doi:10.1149/1.1628871 · Cited by 144
Sun, Y., Myung, S., Park, B.-C., & Amine, K. (2006) · Chemistry of Materials · doi:10.1021/cm061746k · Cited by 136
Self-citationSun, H. H., Choi, W., Lee, J. K., Oh, I., & Jung, H. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.075 · Cited by 135
Kostecki, R. M., & McLARNON, F. R. (2004) · Electrochemical and Solid-State Letters · doi:10.1149/1.1793771 · Cited by 130
Hoang, K., & Johannes, M. D. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta00673a · Cited by 130
Doughty, D. H., & Crafts, C. C. (2006) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/889934 · Cited by 128
Diagnosis of power fade mechanisms in high-power lithium-ion cells
Abraham, D. P., Liu, J., Chen, C. H., Hyung, Y.-E., Stoll, M., Elsen, N., MacLaren, S., Twesten, R. D., Haasch, R. T., Sammann, E., et al. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00275-1 · Cited by 124
Capacity-Fading Mechanisms of LiNiO[sub 2]-Based Lithium-Ion Batteries
Sasaki, T. G., Nonaka, T., Oka, H., Okuda, C., Itou, Y., Kondo, Y., Takeuchi, Y., Ukyo, Y., Tatsumi, K., & Muto, S. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3076136 · Cited by 120
WATANABE, S., Kinoshita, M., & Nakura, K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.079 · Cited by 116
Koyama, Y., Makimura, Y., Tanaka, I., Adachi, H., & Ohzuku, T. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1783908 · Cited by 113
Liu, H. (2003) · Solid State Ionics · doi:10.1016/j.ssi.2003.11.010 · Cited by 109
Zhu, L., Liu, Y., Wu, W., Wu, X., Tang, W., & Wu, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02529j · Cited by 104
Bloom, I., Jones, S. A., Battaglia, V., Henriksen, G. L., Christophersen, J. P., Wright, R. B., Ho, C. D., Belt, J. R., & Motloch, C. G. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00806-1 · Cited by 100
Park, K., Lim, B., Choi, M.-H., Jung, H., Sun, Y., Haro, M., Vicente, N., Bisquert, J., & García-Belmonte, G. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta05657h · Cited by 96
Self-citationAdvanced cathode materials for high-power applications
Amine, K., Liu, J., Belharouak, I., Kang, S.-H., Bloom, I., Vissers, D. R., & Henriksen, G. L. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.03.227 · Cited by 94
Liao, P. Y., Duh, J., & Sheen, S. R. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1952687 · Cited by 90
Kang, K. S., Choi, S., Song, J.-H., Woo, S., Jo, Y. N., Choi, J., Yim, T., Yu, J., & Kim, Y. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.024 · Cited by 90
Myung, S., Komaba, S., Kurihara, K., Hosoya, K., Kumagai, N., Sun, Y., Nakai, I., Yonemura, M., & Kamiyama, T. (2006) · Chemistry of Materials · doi:10.1021/cm052704j · Cited by 88
Self-citationImpact of high rate discharge on the aging of lithium nickel cobalt aluminum oxide batteries
Wong, D. N., Shrestha, B., Wetz, D. A., & Heinzel, J. M. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.01.110 · Cited by 87
Konishi, H., Yuasa, T., & Yoshikawa, M. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.01.016 · Cited by 87
Diagnostic Evaluation of Detrimental Phenomena in High-Power Lithium-Ion Batteries
Kostecki, R. M., Lei, J., McLARNON, F. R., Shim, J., & Striebel, K. A. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2170551 · Cited by 83
Investigation of positive electrodes after cycle testing of high-power Li-ion battery cells
Kobayashi, H., Shikano, M., Koike, S., Sakaebe, H., & Tatsumi, K. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.06.134 · Cited by 83
Role of AlF[sub 3] Coating on LiCoO[sub 2] Particles during Cycling to Cutoff Voltage above 4.5 V
Sun, Y., Yoon, C. S., Myung, S., Belharouak, I., & Amine, K. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3236501 · Cited by 80
Self-citationDual functioned BiOF-coated Li[Li0.1Al0.05Mn1.85]O4 for lithium batteries
Lee, K., Myung, S., Amine, K., Yashiro, H., & Sun, Y. (2009) · Journal of Materials Chemistry · doi:10.1039/b819224c · Cited by 73
Self-citationInvestigation of positive electrodes after cycle testing of high-power Li-ion battery cells II
Shikano, M., Kobayashi, H., Koike, S., Sakaebe, H., Ikenaga, E., Kobayashi, K., & Tatsumi, K. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.06.138 · Cited by 71
Synthesis and Electrochemical Characterization of Divalent Cation-Incorporated Lithium Nickel Oxide
Chang, C., Kim, J. Y., & Kumta, P. N. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393424 · Cited by 71
Characterization of high-power lithium-ion cells during constant current cycling
Shim, J., & Striebel, K. A. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00351-3 · Cited by 61
Yano, A., Aoyama, S., Shikano, M., et al. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0131502jes · Cited by 51
He, Y.-B., Ning, F., Yang, Q.-H., Song, Q.-S., Li, B., Su, F., Du, H., Tang, Z.-Y., & Kang, F. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.042 · Cited by 50
Noh, H.-J., Myung, S., Jung, H., Yashiro, H., Amine, K., & Sun, Y. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200699 · Cited by 48
Self-citationSun, Y., Myung, S., Park, B.-C., & Yashiro, H. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2956088 · Cited by 46
Self-citationElectrochemical performance of Al2O3-coated Fe doped LiCoVO4
Landschoot, N. V., Kelder, E. M., Kooyman, P. J., Kwakernaak, C., & Schoonman, J. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.06.046 · Cited by 43
Noh, H.-J., Ju, J.-W., & Sun, Y. (2013) · ChemSusChem · doi:10.1002/cssc.201300379 · Cited by 43
Self-citationKinoshita, A., Yanagida, K., Yanai, A., et al. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00806-0 · Cited by 37
Sun, Y., Myung, S., Bang, H. J., Park, B.-C., Park, S.-J., & Sung, N.-E. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2763970 · Cited by 34
Self-citationMohan, P., & Kalaignan, G. P. (2012) · Ionics · doi:10.1007/s11581-012-0821-x · Cited by 31
Cited by
Performance and cost of materials for lithium-based rechargeable automotive batteries
Schmuch, R., Wagner, R., Hörpel, G., Placke, T., & Winter, M. (2018) · Nature Energy · doi:10.1038/s41560-018-0107-2 · Cited by 3,233
An Outlook on Lithium Ion Battery Technology
Manthiram, A. (2017) · ACS Central Science · doi:10.1021/acscentsci.7b00288 · Cited by 1,771
High-nickel layered oxide cathodes for lithium-based automotive batteries
Li, W., Erickson, E. M., & Manthiram, A. (2020) · Nature Energy · doi:10.1038/s41560-019-0513-0 · Cited by 1,754
Ryu, H.-H., Park, K.-J., Yoon, C. S., & Sun, Y.-K. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b05269 · Cited by 1,629
Self-citationFundamental understanding and practical challenges of anionic redox activity in Li-ion batteries
Assat, G., & Tarascon, J.-M. (2018) · Nature Energy · doi:10.1038/s41560-018-0097-0 · Cited by 1,588
Metadata
- Authors
- Myung, S.-T., Maglia, F., Park, K.-J., Yoon, C. S., Lamp, P., Kim, S.-J., & Sun, Y.-K.
- Venue
- ACS Energy Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-12-23
- Volume
- 2
- Issue
- 1
- Pages
- 196-223
- ISSN
- 2380-8195 (ISSN-L)
- OpenAlex
- W2567205822
- Cited by
- 1,382
- References
- 109
- FWCI
- 45.28
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.