The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Two-Dimensional Organic Tin Halide Perovskites with Tunable Visible Emission and Their Use in Light-Emitting Devices
Open accessAbstract
Abstract Hybrid organic lead trihalide perovskites continue to generate significant interest for use in optoelectronic devices such as solar cells and light-emitting devices. However, the toxicity of lead is considered one of the main obstacles to the commercialization of this technology. Although challenging, the replacement of lead by tin is currently the most promising alternative. Herein, we explore a class of low-dimensional, lead-free perovskite materials (2D (PEA)2SnIxBr4–x, where PEA ≡ C6H5CH2CH2NH3+) with tunable optical properties in the visible region of the spectrum. Specifically, we show that 2D (PEA)2SnI4 perovskite exhibits superior photoluminescence properties to conventional 3D CH3NH3SnI3 and that (PEA)2SnI4 can act as a sensitizer on mesoporous TiO2. We go on to demonstrate visible (∼630 nm) electroluminescence from a device employing a (PEA)2SnI4 emitter sandwiched between ITO/PEDOT:PSS and F8/LiF/Al as hole and electron injection electrodes, respectively. These devices reach a luminance of 0.15 cd/m2 at 4.7 mA/cm2 and an efficacy of 0.029 cd/A at 3.6 V. This proof-of-principle device indicates a viable path to low-dimensional, lead-free perovskite optoelectronics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Protesescu, L., Yakunin, S., Bodnarchuk, M. I., Krieg, F., Caputo, R., Hendon, C. H., Yang, R. X., Walsh, A., & Kovalenko, M. V. (2015) · Nano Letters · doi:10.1021/nl5048779 · Cited by 9,209
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Bright light-emitting diodes based on organometal halide perovskite
Tan, Z.-K., Moghaddam, R. S., Lai, M. L., Docampo, P., Higler, R., Deschler, F., Price, M., Sadhanala, A., Pazos, L. M., Credgington, D., et al. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.149 · Cited by 4,450
High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells
Tsai, H., Nie, W., Blancon, J.-C., Stoumpos, C. C., Asadpour, R., Harutyunyan, B., Neukirch, A. J., Verduzco, R., Crochet, J. J., Tretiak, S., et al. (2016) · Nature · doi:10.1038/nature18306 · Cited by 3,384
Lead-free solid-state organic–inorganic halide perovskite solar cells
Hao, F., Stoumpos, C. C., Cao, D. H., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.82 · Cited by 3,026
Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes
Cho, H., Jeong, S.-H., Park, M.-H., Kim, Y.-H., Wolf, C., Lee, C.-L., Heo, J. H., Sadhanala, A., Myoung, N., Yoo, S., et al. (2015) · Science · doi:10.1126/science.aad1818 · Cited by 2,925
Lead-free organic–inorganic tin halide perovskites for photovoltaic applications
Noel, N. K., Stranks, S. D., Abate, A., Wehrenfennig, C., Guarnera, S., Haghighirad, A.-A., Sadhanala, A., Eperon, G. E., Pathak, S. K., Johnston, M. B., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01076k · Cited by 2,746
Perovskite energy funnels for efficient light-emitting diodes
Yuan, M., Quan, L. N., Comin, R., Walters, G., Sabatini, R., Voznyy, O., Hoogland, S., Zhao, Y., Beauregard, E. M., Kanjanaboos, P., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.110 · Cited by 2,325
2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications
Cao, D. H., Stoumpos, C. C., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03796 · Cited by 2,158
Organic-Inorganic Hybrid Materials as Semiconducting Channels in Thin-Film Field-Effect Transistors
Kagan, C. R., Mitzi, D. B., & Dimitrakopoulos, C. D. (1999) · Science · doi:10.1126/science.286.5441.945 · Cited by 2,110
A Layered Hybrid Perovskite Solar‐Cell Absorber with Enhanced Moisture Stability
Smith, I. C., Hoke, E. T., Solis‐Ibarra, D., McGehee, M. D., & Karunadasa, H. I. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201406466 · Cited by 2,011
Sutherland, B. R., & Sargent, E. H. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.62 · Cited by 1,730
Perovskite Materials for Light‐Emitting Diodes and Lasers
Veldhuis, S. A., Boix, P. P., Yantara, N., Li, M., Sum, T. C., Mathews, N., & Mhaisalkar, S. G. (2016) · Advanced Materials · doi:10.1002/adma.201600669 · Cited by 1,465
Ligand-Stabilized Reduced-Dimensionality Perovskites
Quan, L. N., Yuan, M., Comin, R., Voznyy, O., Beauregard, E. M., Hoogland, S., Buin, A., Kirmani, A. R., Zhao, K., Amassian, A., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b11740 · Cited by 1,436
Lead‐Free Halide Perovskite Solar Cells with High Photocurrents Realized Through Vacancy Modulation
Kumar, M. H., Dharani, S., Leong, W. L., Boix, P. P., Prabhakar, R. R., Baikie, T., Shi, C., Ding, H., Ramesh, R., Asta, M., et al. (2014) · Advanced Materials · doi:10.1002/adma.201401991 · Cited by 1,209
Highly Efficient Perovskite‐Quantum‐Dot Light‐Emitting Diodes by Surface Engineering
Pan, J., Quan, L. N., Zhao, Y., Peng, W., Murali, B., Sarmah, S. P., Yuan, M., Sinatra, L., Alyami, N. M., Liu, J., et al. (2016) · Advanced Materials · doi:10.1002/adma.201600784 · Cited by 1,126
Conducting tin halides with a layered organic-based perovskite structure
Mitzi, D. B., Feild, C. A., Harrison, W. T. A., & Guloy, A. M. (1994) · Nature · doi:10.1038/369467a0 · Cited by 1,100
The Role of Oxygen in the Degradation of Methylammonium Lead Trihalide Perovskite Photoactive Layers
Aristidou, N., Sanchez‐Molina, I., Chotchuangchutchaval, T., Brown, M., Martinez, L., Rath, T., & Haque, S. A. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201503153 · Cited by 969
Self-citationQuantum Size Effect in Organometal Halide Perovskite Nanoplatelets
Sichert, J. A., Tong, Y., Mutz, N., Vollmer, M., Fischer, S., Milowska, K. Z., García Cortadella, R., Nickel, B., Cardenas-Daw, C., Stolarczyk, J. K., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02985 · Cited by 936
Liao, W., Zhao, D., Yu, Y., Grice, C. R., Wang, C., Cimaroli, A. J., Schulz, P., Meng, W., Zhu, K., Xiong, R., et al. (2016) · Advanced Materials · doi:10.1002/adma.201602992 · Cited by 793
Efficient Light-Emitting Diodes Based on Nanocrystalline Perovskite in a Dielectric Polymer Matrix
Li, G., Tan, Z.-K., Di, D., Lai, M. L., Jiang, L., Lim, J. H.-W., Friend, R. H., & Greenham, N. C. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00235 · Cited by 685
A Layered Hybrid Perovskite Solar‐Cell Absorber with Enhanced Moisture Stability
Smith, I. C., Hoke, E. T., Solis‐Ibarra, D., McGehee, M. D., & Karunadasa, H. I. (2014) · Angewandte Chemie · doi:10.1002/ange.201406466 · Cited by 684
Efficient Visible Quasi‐2D Perovskite Light‐Emitting Diodes
Byun, J., Cho, H., Wolf, C., Jang, M., Sadhanala, A., Friend, R. H., Yang, H., & Lee, T. (2016) · Advanced Materials · doi:10.1002/adma.201601369 · Cited by 655
Enhanced stability and efficiency in hole-transport-layer-free CsSnI3 perovskite photovoltaics
Marshall, K. P., Walker, M., Walton, R. I., & Hatton, R. A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.178 · Cited by 644
Optical properties due to electronic transitions in two-dimensional semiconductors (CnH2n+1NH3)2PbI4
Ishihara, T., Takahashi, J., & Goto, T. (1990) · Physical Review B · doi:10.1103/physrevb.42.11099 · Cited by 643
Cheng, Z., & Lin, J. (2010) · CrystEngComm · doi:10.1039/c001929a · Cited by 633
Era, M., Morimoto, S., Tsutsui, T., & Saito, S. (1994) · Applied Physics Letters · doi:10.1063/1.112265 · Cited by 625
High mobility emissive organic semiconductor
Liu, J., Zhang, H., Dong, H., Meng, L., Jiang, L., Jiang, L., Wang, Y., Yu, J., Sun, Y., Hu, W., et al. (2015) · Nature Communications · doi:10.1038/ncomms10032 · Cited by 570
Metal halide perovskite light emitters
Kim, Y.-H., Cho, H., & Lee, T.-W. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1607471113 · Cited by 549
Chondroudis, K., & Mitzi, D. B. (1999) · Chemistry of Materials · doi:10.1021/cm990561t · Cited by 490
Color-Pure Violet-Light-Emitting Diodes Based on Layered Lead Halide Perovskite Nanoplates
Liang, D., Peng, Y., Fu, Y., Shearer, M. J., Zhang, J., Zhai, J., Zhang, Y., Hamers, R. J., Andrew, T. L., & Jin, S. (2016) · ACS Nano · doi:10.1021/acsnano.6b02683 · Cited by 447
Charge-transport in tin-iodide perovskite CH3NH3SnI3: origin of high conductivity
Takahashi, Y., Obara, R., Lin, Z.-Z., Takahashi, Y., Naito, T., Inabe, T., Ishibashi, S., & Terakura, K. (2011) · Dalton Transactions · doi:10.1039/c0dt01601b · Cited by 428
Current progress and future perspectives for organic/inorganic perovskite solar cells
Boix, P. P., Nonomura, K., Mathews, N., & Mhaisalkar, S. G. (2014) · Materials Today · doi:10.1016/j.mattod.2013.12.002 · Cited by 426
Optical properties of PbI-based perovskite structures
Ishihara, T. (1994) · Journal of Luminescence · doi:10.1016/0022-2313(94)90145-7 · Cited by 426
Transport, Optical, and Magnetic Properties of the Conducting Halide Perovskite CH3NH3SnI3
Mitzi, D. B., Feild, C. A., Schlesinger, Z., & Laibowitz, R. B. (1995) · Journal of Solid State Chemistry · doi:10.1006/jssc.1995.1023 · Cited by 347
Synthesis, properties, and optical applications of low-dimensional perovskites
Zhang, Y., Liu, J., Wang, Z., Xue, Y., Ou, Q., Polavarapu, L., Zheng, J., Qi, X., & Bao, Q. (2016) · Chemical Communications · doi:10.1039/c6cc06425f · Cited by 303
Solution‐Processed Organic–Inorganic Perovskite Field‐Effect Transistors with High Hole Mobilities
Matsushima, T., Hwang, S., Sandanayaka, A. S. D., Qin, C., Terakawa, S., Fujihara, T., Yahiro, M., & Adachi, C. (2016) · Advanced Materials · doi:10.1002/adma.201603126 · Cited by 299
Hattori, T., Taira, T., Era, M., Tsutsui, T., & Saito, S. (1996) · Chemical Physics Letters · doi:10.1016/0009-2614(96)00310-7 · Cited by 232
Efficient Low‐Temperature Solution‐Processed Lead‐Free Perovskite Infrared Light‐Emitting Diodes
Hong, W., Huang, Y., Chang, C., Zhang, Z., Tsai, H., Chang, N., & Chao, Y. (2016) · Advanced Materials · doi:10.1002/adma.201601024 · Cited by 203
Hybrid Field-Effect Transistor Based on a Low-Temperature Melt-Processed Channel Layer
Mitzi, D. B., Dimitrakopoulos, C. D., Rosner, J., Medeiros, D. R., Xu, Z., & Noyan, I. C. (2002) · Advanced Materials · doi:10.1002/1521-4095(20021203)14:23<1772::aid-adma1772>3.0.co;2-y · Cited by 182
Tunable Near-Infrared Luminescence in Tin Halide Perovskite Devices
Lai, M. L., Tay, T. Y. S., Sadhanala, A., Dutton, S. E., Li, G., Friend, R. H., & Tan, Z.-K. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b01047 · Cited by 159
Electron emission measurements and the defect structure of ?-Al2O3
Odier, P., Rifflet, J. C., & Loup, J. P. (1984) · Journal of Materials Science · doi:10.1007/bf01058088 · Cited by 8
Cited by
Two-Dimensional Hybrid Halide Perovskites: Principles and Promises
Mao, L., Stoumpos, C. C., & Kanatzidis, M. G. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b10851 · Cited by 1,584
Metal halide perovskites for light-emitting diodes
Liu, X.-K., Xu, W., Bai, S., Jin, Y., Wang, J., Friend, R. H., & Gao, F. (2021) · Nature Materials · doi:10.1038/s41563-020-0784-7 · Cited by 1,515
Li, X., Hoffman, J. M., & Kanatzidis, M. G. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01006 · Cited by 1,085
Perovskites for Next-Generation Optical Sources
Quan, L. N., Rand, B. P., Friend, R. H., Mhaisalkar, S. G., Lee, T.-W., & Sargent, E. H. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00107 · Cited by 983
Hybrid Dion–Jacobson 2D Lead Iodide Perovskites
Mao, L., Ke, W., Pedesseau, L., Wu, Y., Katan, C., Even, J., Wasielewski, M. R., Stoumpos, C. C., & Kanatzidis, M. G. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b00542 · Cited by 980
Metadata
- Authors
- Lanzetta, L., Marin-Beloqui, J. M., Sanchez-Molina, I., Ding, D., & Haque, S. A.
- Venue
- ACS Energy Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-06-27
- Volume
- 2
- Issue
- 7
- Pages
- 1662-1668
- ISSN
- 2380-8195 (ISSN-L)
- OpenAlex
- W2714769417
- Cited by
- 281
- References
- 47
- FWCI
- 8.84
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.