Impact of Cathode Material Particle Size on the Capacity of Bulk-Type All-Solid-State Batteries
The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Abstract
The implementation of all-solid-state batteries (ASSBs) is regarded as an important step toward next-generation energy storage systems, in particular for electric vehicles and portable electronics. This may be achieved through application of layered Ni-rich oxide cathode materials such as Li 1+ x (Ni 1– y – z Co y Mn z ) 1– x O 2 (NCM) with high specific capacity and thiophosphate-based solid electrolytes. Here, the profound effect that the secondary particle size of the cathode active material has on the capacity of ASSB cells comprising NCM622 (60% Ni), β-Li 3 PS 4, and In anode is demonstrated. We show the benefits of using small particles ( d ≪ 10 μm), allowing virtually full charge capacity. This finding is rationalized through galvanostatic charge–discharge tests and complementary ex situ and operando X-ray diffraction experiments combined with Rietveld refinement analysis. Our results indicate the importance of considering and avoiding electrochemically inactive electrode material in bulk-type ASSBs, which we show using charge transport measurements is due to poor electronic contact (in carbon-free cathode composites).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Towards greener and more sustainable batteries for electrical energy storage
Larcher, D., & Tarascon, J.-M. (2015) · Nature Chemistry · doi:10.1038/nchem.2085 · Cited by 7,872
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
A solid future for battery development
Janek, J., & Zeier, W. G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.141 · Cited by 3,979
Self-citationHigh-power all-solid-state batteries using sulfide superionic conductors
Kato, Y., Hori, S., Saito, T., Suzuki, K., Hirayama, M., Mitsui, A., Yonemura, M., Iba, H., & Kanno, R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.30 · Cited by 3,517
Thackeray, M. M., Wolverton, C., & Isaacs, E. D. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21892e · Cited by 2,515
Noh, H.-J., Youn, S., Yoon, C. S., & Sun, Y.-K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.063 · Cited by 2,302
Nickel‐Rich Layered Lithium Transition‐Metal Oxide for High‐Energy Lithium‐Ion Batteries
Liu, W., Oh, P., Liu, X., Lee, M., Cho, W., Chae, S., Kim, Y., & Cho, J. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201409262 · Cited by 1,960
Ryu, H.-H., Park, K.-J., Yoon, C. S., & Sun, Y.-K. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b05269 · Cited by 1,629
Koerver, R., Aygün, I., Leichtweiß, T., Dietrich, C., Zhang, W., Binder, J. O., Hartmann, P., Zeier, W. G., & Janek, J. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00931 · Cited by 1,020
Self-citationAnomalous High Ionic Conductivity of Nanoporous β-Li3PS4
Liu, Z., Fu, W., Payzant, E. A., Yu, X., Wu, Z., Dudney, N. J., Kiggans, J., Hong, K., Rondinone, A. J., & Liang, C. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3110895 · Cited by 879
A review of lithium and non-lithium based solid state batteries
Kim, J. G., Son, B., Mukherjee, S., Schuppert, N., Bates, A., Kwon, O., Choi, M. J., Chung, H. Y., & Park, S. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.02.054 · Cited by 783
Kondrakov, A. O., Schmidt, A., Xu, J., Geßwein, H., Mönig, R., Hartmann, P., Sommer, H., Brezesinski, T., & Janek, J. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b12885 · Cited by 701
Self-citationZhang, W., Weber, D. A., Weigand, H., Arlt, T., Manke, I., Schröder, D., Koerver, R., Leichtweiss, T., Hartmann, P., Zeier, W. G., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b01137 · Cited by 538
Self-citationSun, H.-H., & Manthiram, A. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b03268 · Cited by 465
Crystal structure of a superionic conductor, Li7P3S11
YAMANE, H., SHIBATA, M., SHIMANE, Y., JUNKE, T., SEINO, Y., ADAMS, S., MINAMI, K., HAYASHI, A., & TATSUMISAGO, M. (2007) · Solid State Ionics · doi:10.1016/j.ssi.2007.05.020 · Cited by 432
The Detrimental Effects of Carbon Additives in Li10GeP2S12-Based Solid-State Batteries
Zhang, W., Leichtweiß, T., Culver, S. P., Koerver, R., Das, D., Weber, D. A., Zeier, W. G., & Janek, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11530 · Cited by 392
Self-citationNam, Y. J., Oh, D. Y., Jung, S. H., & Jung, Y. S. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.11.031 · Cited by 390
de Biasi, L., Kondrakov, A. O., Geßwein, H., Brezesinski, T., Hartmann, P., & Janek, J. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b06363 · Cited by 374
Self-citationCharge-Transfer-Induced Lattice Collapse in Ni-Rich NCM Cathode Materials during Delithiation
Kondrakov, A. O., Geßwein, H., Galdina, K., de Biasi, L., Meded, V., Filatova, E. O., Schumacher, G., Wenzel, W., Hartmann, P., Brezesinski, T., et al. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b06598 · Cited by 367
Self-citationZhang, W., Schröder, D., Arlt, T., Manke, I., Koerver, R., Pinedo, R., Weber, D. A., Sann, J., Zeier, W. G., & Janek, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02730c · Cited by 348
Self-citationRational SOFC material design: new advances and tools
Liu, M., Lynch, M. E., Blinn, K., Alamgir, F. M., & Choi, Y. (2011) · Materials Today · doi:10.1016/s1369-7021(11)70279-6 · Cited by 327
Redox-active cathode interphases in solid-state batteries
Koerver, R., Walther, F., Aygün, I., Sann, J., Dietrich, C., Zeier, W. G., & Janek, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta07641j · Cited by 287
Self-citationHakari, T., Deguchi, M., Mitsuhara, K., Ohta, T., Saito, K., Orikasa, Y., Uchimoto, Y., Kowada, Y., Hayashi, A., & Tatsumisago, M. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00551 · Cited by 205
Cited by
Fundamentals of inorganic solid-state electrolytes for batteries
Famprikis, T., Canepa, P., Dawson, J. A., Islam, M. S., & Masquelier, C. (2019) · Nature Materials · doi:10.1038/s41563-019-0431-3 · Cited by 2,525
Tian, Y., Zeng, G., Rutt, A., Shi, T., Kim, H., Wang, J., Koettgen, J., Sun, Y., Ouyang, B., Chen, T., et al. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00767 · Cited by 1,614
Commercialization of Lithium Battery Technologies for Electric Vehicles
Zeng, X., Li, M., Abd El‐Hady, D., Alshitari, W., Al‐Bogami, A. S., Lu, J., & Amine, K. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900161 · Cited by 1,542
Interfaces and Interphases in All-Solid-State Batteries with Inorganic Solid Electrolytes
Banerjee, A., Wang, X., Fang, C., Wu, E. A., & Meng, Y. S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00101 · Cited by 1,526
High‐Entropy Oxides: Fundamental Aspects and Electrochemical Properties
Sarkar, A., Wang, Q., Schiele, A., Chellali, M. R., Bhattacharya, S. S., Wang, D., Brezesinski, T., Hahn, H., Velasco, L., & Breitung, B. (2019) · Advanced Materials · doi:10.1002/adma.201806236 · Cited by 1,234
Self-citation
Metadata
- Authors
- Strauss, F., Bartsch, T., de Biasi, L., Kim, A.-Y., Janek, J., Hartmann, P., & Brezesinski, T.
- Venue
- ACS Energy Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-03-21
- Volume
- 3
- Issue
- 4
- Pages
- 992-996
- ISSN
- 2380-8195 (ISSN-L)
- OpenAlex
- W2790545554
- Cited by
- 334
- References
- 23
- FWCI
- 10.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.