The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index; 4 of the 14 sources its claims cite were checked for support.
Three-Dimensional Printed MoS2/Graphene Aerogel Electrodes for Hydrogen Evolution Reactions
Open accessAbstract
High Resolution Image Download MS PowerPoint Slide In this work, we demonstrate the use of direct ink writing (DIW) technology to create 3D catalytic electrodes for electrochemical applications. Hybrid MoS 2 /graphene aerogels are made by mixing commercially available MoS 2 and graphene oxide powders into a thixotropic, high concentration, viscous ink. A porous 3D structure of 2D graphene sheets and MoS 2 particles was created after post treatment by freeze-drying and reducing graphene oxide through annealing. The composition and morphology of the samples were fully characterized through XPS, BET, and SEM/EDS. The resulting 3D printed MoS 2 /graphene aerogel electrodes had a remarkable electrochemically active surface area (>1700 cm 2 ) and were able to achieve currents over 100 mA in acidic media. Notably, the catalytic activity of the MoS 2 /graphene aerogel electrodes was maintained with minimal loss in surface area compared to the non-3D printed electrodes, suggesting that DIW can be a viable method of producing durable electrodes with a high surface area for water splitting. This demonstrates that 3D printing a MoS 2 /graphene 3D porous network directly using our approach not only improves electrolyte dispersion and facilitates catalyst utilization but also provides multidimensional electron transport channels for improving electronic conductivity.
Overview
CoChat Summary
TL;DR
Direct ink writing was used to 3D print hybrid MoS₂/graphene aerogel electrodes for the hydrogen evolution reaction. The printed lattices achieved high electrochemically active surface area and maintained it under high currents, while monoliths lost substantial ECSA due to trapped H₂ gas.
Key findings
- 3D printed GA/MoS₂ lattices and monoliths had ECSAs of ∼1725 and ∼3100 cm², respectively, compared with ∼800 and ∼1540 cm² for graphene-only control lattices and monoliths.
- GA/MoS₂ electrodes showed improved HER activity over GA controls and achieved over 100 mA total current in 0.5 M sulfuric acid.
- After 1 h chronopotentiometry at 10, 50, and 100 mA, GA/MoS₂ lattices lost <2% of their ECSA, whereas GA/MoS₂ and GA monoliths lost >60% due to H₂ gas trapped in pores.
- The aerogels had a surface area of 89 m²/g, greater than a similarly made graphene aerogel (26 m²/g) but lower than previous GA/MoS₂ aerogels (691 m²/g) because freeze-drying was used instead of critical point drying.
Methods
- Ink was formulated with 4 wt % graphene oxide (300–800 nm platelets), 4 wt % commercial MoS₂, and hydroxypropyl methyl cellulose; cubic lattices and monoliths were printed by DIW, freeze-dried for 48 h, and annealed at 1050 °C for 3 h under 4% H₂/Ar with excess sulfur.
- Composition and morphology were characterized by XPS, BET nitrogen porosimetry, and SEM/EDS.
- Electrochemical testing used cyclic voltammetry for ECSA in a non-Faradaic window at 50–200 mV/s, HER CV in 0.5 M H₂SO₄ with an iridium oxide on carbon anode and Nafion membrane, and chronopotentiometry at 10, 50, and 100 mA for 1 h with gas chromatography for H₂ quantification.
Limitations
- The paper states that freeze-drying produced a lower surface area (89 m²/g) than previous critical point-dried GA/MoS₂ aerogels (691 m²/g).
- The paper reports that monolith structures lost >60% ECSA after chronopotentiometry because H₂ gas became trapped in pores, blocking electrolyte access.
- Evident from the text: no explicit limitations section is provided, and durability testing was limited to 1 h chronopotentiometry at three currents; detailed ink preparation and printing are relegated to Supporting Information.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures




Verification
Claims the paper makes
2 Valid · 3 Not valid · 5 Not checked · 31 Own results and interpretations
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The MoS2 particle and GO are converted into a hybrid structure consisting of MoS2 particles homogeneously distributed on the surface of a highly porous GA framework after freeze-drying and thermal annealing.”
§ Three-Dimensional Printed MoS2/Graphene Aerogel Electrodes for Hydrogen Evolution Reactions > Conclusions
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
None of the sources cited for this claim have been checked yet.
In the paper
“The GA/MoS2 electrodes demonstrated a clear improvement in activity compared to the GA samples”
§ Three-Dimensional Printed MoS2/Graphene Aerogel Electrodes for Hydrogen Evolution Reactions > Results and Discussion
boostedstates a causen = 2- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“When evaluated by nitrogen porosimetry, these aerogels had a surface area of 89 m2/g.”
§ Three-Dimensional Printed MoS2/Graphene Aerogel Electrodes for Hydrogen Evolution Reactions > Results and Discussion
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“This is greater than the surface area of a graphene aerogel made in a similar manner (26 m2/g).”
§ Three-Dimensional Printed MoS2/Graphene Aerogel Electrodes for Hydrogen Evolution Reactions > Results and Discussion
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The GA/MoS2 samples demonstrated lower overpotentials for each of the currents tested compared to the GA samples as expected.”
§ Three-Dimensional Printed MoS2/Graphene Aerogel Electrodes for Hydrogen Evolution Reactions > Results and Discussion
boostedstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
19 more claims
Create a free account to see all 41 claims and to verify the 1 reference still open.
- It may state two separate claims as one. 13
- Probably not a substantial claim. 6
- Borderline: one of the tests for a substantial claim is unclear. 1
Citations
Cites
Walter, M. G., Warren, E. L., McKone, J. R., Boettcher, S. W., Mi, Q., Santori, E. A., & Lewis, N. S. (2010) · Chemical Reviews · doi:10.1021/cr1002326 · Cited by 9,388
Identification of Active Edge Sites for Electrochemical H 2 Evolution from MoS 2 Nanocatalysts
Jaramillo, T. F., Jørgensen, K. P., Bonde, J., Nielsen, J. H., Horch, S., & Chorkendorff, I. (2007) · Science · doi:10.1126/science.1141483 · Cited by 6,100
Enhanced Hydrogen Evolution Catalysis from Chemically Exfoliated Metallic MoS 2 Nanosheets
Lukowski, M. A., Daniel, A. S., Meng, F., Forticaux, A., Li, L., & Jin, S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja404523s · Cited by 3,341
Self-Assembled Graphene Hydrogel via a One-Step Hydrothermal Process
Xu, Y., Sheng, K., Li, C., & Shi, G. (2010) · ACS Nano · doi:10.1021/nn101187z · Cited by 3,251
Conducting MoS 2 Nanosheets as Catalysts for Hydrogen Evolution Reaction
Voiry, D., Salehi, M., Silva, R., Fujita, T., Chen, M., Asefa, T., Shenoy, V. B., Eda, G., & Chhowalla, M. (2013) · Nano Letters · doi:10.1021/nl403661s · Cited by 2,203
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740 · cited 2×
“25 − 28 Extrusion-based direct ink writing 22 (DIW) is a process in which an “ink” is extruded through a nozzle as directed by a computer-controlled stage.”
Graphene–MoS2 hybrid structures for multifunctional photoresponsive memory devices
Roy, K., Padmanabhan, M., Goswami, S., Sai, T. P., Ramalingam, G., Raghavan, S., & Ghosh, A. (2013) · Nature Nanotechnology · doi:10.1038/nnano.2013.206 · Cited by 1,436
Synthesis of Graphene Aerogel with High Electrical Conductivity
Worsley, M. A., Pauzauskie, P. J., Olson, T. Y., Biener, J., Satcher, J. H., & Baumann, T. F. (2010) · Journal of the American Chemical Society · doi:10.1021/ja1072299 · Cited by 1,216
Self-citationHighly compressible 3D periodic graphene aerogel microlattices
Zhu, C., Han, T. Y.-J., Duoss, E. B., Golobic, A. M., Kuntz, J. D., Spadaccini, C. M., & Worsley, M. A. (2015) · Nature Communications · doi:10.1038/ncomms7962 · Cited by 1,148
Self-citationAll The Catalytic Active Sites of MoS 2 for Hydrogen Evolution
Li, G., Zhang, D., Qiao, Q., Yu, Y., Peterson, D., Zafar, A., Kumar, R., Curtarolo, S., Hunte, F., Shannon, S., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b05940 · Cited by 829
Is There Anything Better than Pt for HER?
Hansen, J. N., Prats, H., Toudahl, K. K., Mørch Secher, N., Chan, K., Kibsgaard, J., & Chorkendorff, I. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c00246 · Cited by 820
Jakus, A. E., Secor, E. B., Rutz, A. L., Jordan, S. W., Hersam, M. C., & Shah, R. N. (2015) · ACS Nano · doi:10.1021/acsnano.5b01179 · Cited by 710
Cellulose-based hydrogel materials: chemistry, properties and their prospective applications
Kabir, S. M. F., Sikdar, P. P., Haque, B., Bhuiyan, M. A. R., Ali, A., & Islam, M. N. (2018) · Progress in Biomaterials · doi:10.1007/s40204-018-0095-0 · Cited by 565
3D Printing of Graphene Aerogels
Zhang, Q., Zhang, F., Medarametla, S. P., Li, H., Zhou, C., & Lin, D. (2016) · Small · doi:10.1002/smll.201503524 · Cited by 532
‘Renewable’ hydrogen: Prospects and challenges
Abbasi, T., & Abbasi, S. A. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.02.026 · Cited by 508
Direct writing in three dimensions
Lewis, J. A., & Gratson, G. M. (2004) · Materials Today · doi:10.1016/s1369-7021(04)00344-x · Cited by 507
Efficient 3D Printed Pseudocapacitive Electrodes with Ultrahigh MnO2 Loading
Yao, B., Chandrasekaran, S., Zhang, J., Xiao, W., Qian, F., Zhu, C., Duoss, E. B., Spadaccini, C. M., Worsley, M. A., & Li, Y. (2019) · Joule · doi:10.1016/j.joule.2018.09.020 · Cited by 491
Self-citationHigh Surface Area MoS 2 /Graphene Hybrid Aerogel for Ultrasensitive NO 2 Detection
Long, H., Harley‐Trochimczyk, A., Pham, T., Tang, Z., Shi, T., Zettl, A., Carraro, C., Worsley, M. A., & Maboudian, R. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201601562 · Cited by 479
Self-citation3D Printed Graphene Based Energy Storage Devices
Foster, C. W., Down, M. P., Zhang, Y., Ji, X., Rowley-Neale, S. J., Smith, G. C., Kelly, P. J., & Banks, C. E. (2017) · Scientific Reports · doi:10.1038/srep42233 · Cited by 471
3D Printing for Electrochemical Energy Applications
Browne, M. P., Redondo, E., & Pumera, M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00783 · Cited by 434
Direct 3D Printing of Ultralight Graphene Oxide Aerogel Microlattices
Jiang, Y., Xu, Z., Huang, T., Liu, Y., Guo, F., Xi, J., Gao, W., & Gao, C. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707024 · Cited by 370
Graphene oxide dispersions: tuning rheology to enable fabrication
Naficy, S., Jalili, R., Aboutalebi, S. H., Gorkin III, R. A., Konstantinov, K., Innis, P. C., Spinks, G. M., Poulin, P., & Wallace, G. G. (2014) · Mater. Horiz. · doi:10.1039/c3mh00144j · Cited by 368
Eng, A. Y. S., Ambrosi, A., Sofer, Z., Šimek, P., & Pumera, M. (2014) · ACS Nano · doi:10.1021/nn503832j · Cited by 333
Printing in Three Dimensions with Graphene
García‐Tuñon, E., Barg, S., Franco, J., Bell, R., Eslava, S., D'Elia, E., Maher, R. C., Guitian, F., & Saiz, E. (2015) · Advanced Materials · doi:10.1002/adma.201405046 · Cited by 303
Direct Ink Write (DIW) 3D Printed Cellulose Nanocrystal Aerogel Structures
Li, V. C.-F., Dunn, C. K., Zhang, Z., Deng, Y., & Qi, H. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-07771-y · Cited by 269
High Surface Area, sp2-Cross-Linked Three-Dimensional Graphene Monoliths
Worsley, M. A., Olson, T. Y., Lee, J. R. I., Willey, T. M., Nielsen, M. H., Roberts, S. K., Pauzauskie, P. J., Biener, J., Satcher, J. H., & Baumann, T. F. (2011) · The Journal of Physical Chemistry Letters · doi:10.1021/jz200223x · Cited by 230
Self-citationRocha, V. G., García-Tuñón, E., Botas, C., Markoulidis, F., Feilden, E., D’Elia, E., Ni, N., Shaffer, M., & Saiz, E. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b10285 · Cited by 191
Dong, H., Liu, C., Ye, H., Hu, L., Fugetsu, B., Dai, W., Cao, Y., Qi, X., Lu, H., & Zhang, X. (2015) · Scientific Reports · doi:10.1038/srep17542 · Cited by 188
Ultralow Density, Monolithic WS2, MoS2, and MoS2/Graphene Aerogels
Worsley, M. A., Shin, S. J., Merrill, M. D., Lenhardt, J., Nelson, A. J., Woo, L. Y., Gash, A. E., Baumann, T. F., & Orme, C. A. (2015) · ACS Nano · doi:10.1021/acsnano.5b00087 · Cited by 182
Self-citationPrinting Porous Carbon Aerogels for Low Temperature Supercapacitors
Yao, B., Peng, H., Zhang, H., Kang, J., Zhu, C., Delgado, G., Byrne, D., Faulkner, S., Freyman, M., Lu, X., et al. (2021) · Nano Letters · doi:10.1021/acs.nanolett.0c04780 · Cited by 174
Self-citationBrown, E., Yan, P., Tekik, H., Elangovan, A., Wang, J., Lin, D., & Li, J. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107689 · Cited by 165
Layered transition metal dichalcogenide electrochemistry: journey across the periodic table
Chia, X., & Pumera, M. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00846e · Cited by 163
Pristine Graphene Aerogels by Room‐Temperature Freeze Gelation
Lin, Y., Liu, F., Casano, G., Bhavsar, R. S., Kinloch, I. A., & Derby, B. (2016) · Advanced Materials · doi:10.1002/adma.201602393 · Cited by 148
Graphene and MoS2 interacting with water: A comparison by ab initio calculations
Levita, G., Restuccia, P., & Righi, M. C. (2016) · Carbon · doi:10.1016/j.carbon.2016.06.072 · Cited by 147
3D printing of lightweight, super-strong yet flexible all-cellulose structure
Jiang, J., Oğuzlu, H., & Jiang, F. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126668 · Cited by 143
Self‐Contained Polymer/Metal 3D Printed Electrochemical Platform for Tailored Water Splitting
Ambrosi, A., & Pumera, M. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700655 · Cited by 141
Zhao, Y., Xie, X., Zhang, J., Liu, H., Ahn, H., Sun, K., & Wang, G. (2015) · Chemistry – A European Journal · doi:10.1002/chem.201501964 · Cited by 112
3D printed alginate-cellulose nanofibers based patches for local curcumin administration
Olmos‐Juste, R., Alonso-Lerma, B., Pérez‐Jiménez, R., Gabilondo, N., & Eceiza, A. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118026 · Cited by 102
Direct ink writing of organic and carbon aerogels
Chandrasekaran, S., Yao, B., Liu, T., Wang, X., Song, Y., Qian, F., Zhu, C. Y., Duoss, E. B., Spadaccini, C. M., Li, Y., et al. (2018) · Materials Horizons · doi:10.1039/c8mh00603b · Cited by 100
Self-citationAdvanced manufacturing for electrosynthesis of fuels and chemicals from CO 2
Corral, D., Feaster, J. T., Sobhani, S., DeOtte, J. R., Lee, D. U., Wong, A. A., Hamilton, J., Beck, V. A., Sarkar, A., Hahn, C., et al. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03679j · Cited by 98
Self-citationMultimaterial 3D-Printed Water Electrolyzer with Earth-Abundant Electrodeposited Catalysts
Ambrosi, A., & Pumera, M. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b04327 · Cited by 93
Yun, X., Lu, B., Xiong, Z., Jia, B., Tang, B., Mao, H., Zhang, T., & Wang, X. (2019) · RSC Advances · doi:10.1039/c9ra04882k · Cited by 89
Self-citationBinder-free graphene oxide doughs
Yeh, C.-N., Huang, H., Lim, A., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08389-6 · Cited by 68
Versatile Direct Writing of Aerogel-Based Sol–Gel Inks
Yang, J., Wang, H., Zhou, B., Shen, J., Zhang, Z., & Du, A. (2021) · Langmuir · doi:10.1021/acs.langmuir.0c03312 · Cited by 43
Xu, Y. S., Zheng, C., Wang, S., & Hou, Y. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.06.040 · Cited by 39
Nanostructured resorcinol-formaldehyde ink for 3D direct writing
Ge, Y., Zhang, T., Zhou, B., Wang, H., Zhang, Z., Shen, J., & Du, A. (2018) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2018.104 · Cited by 27
Activating MoS2 basal planes for hydrogen evolution through the As doping and strain
Yang, Y.-Q., Zhao, C.-X., Bai, S.-Y., Wang, C.-P., & Niu, C.-Y. (2019) · Physics Letters A · doi:10.1016/j.physleta.2019.06.036 · Cited by 18
Enhancing the Mechanical Performance of Reduced Graphene Oxide Aerogel with Cellulose Nanofibers
Yao, C., Yi, J., Lai, H., Shi, G., Hu, Y., Chen, Z., Zhai, J., Wang, X., Zhong, L., & Liu, C. (2021) · ChemNanoMat · doi:10.1002/cnma.202100150 · Cited by 16
Self-citation
Cited by
Rheology in Product Development: An Insight into 3D Printing of Hydrogels and Aerogels
Barrulas, R. V., & Corvo, M. C. (2023) · Gels · doi:10.3390/gels9120986 · Cited by 158
3D Printed Graphene and Graphene/Polymer Composites for Multifunctional Applications
Wu, Y., An, C., & Guo, Y. (2023) · Materials · doi:10.3390/ma16165681 · Cited by 90
Solution-Processable and Printable Two-Dimensional Transition Metal Dichalcogenide Inks
Dai, Y., He, Q., Huang, Y., Duan, X., & Lin, Z. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00791 · Cited by 76
Cayanamide Group Functionalized Crystalline Carbon Nitride Aerogel for Efficient CO 2 Photoreduction
Li, Y., Xue, Y., Gao, X., Wang, L., Liu, X., Wang, Z., & Shen, S. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202312634 · Cited by 81
Khoo, V., Ng, S., Haw, C. Y., & Ong, W. (2024) · Small · doi:10.1002/smll.202401278 · Cited by 39
Metadata
- Authors
- Chandrasekaran, S., Feaster, J., Ynzunza, J., Li, F., Wang, X., Nelson, A. J., & Worsley, M. A.
- Affiliations
- Lawrence Livermore National Laboratory (US)
- Corresponding author
- Chandrasekaran, Swetha
- Worsley, Marcus A.
- Venue
- ACS Materials Au
- Publisher
- American Chemical Society (ACS)
- Published
- 2022-05-05
- Volume
- 2
- Issue
- 5
- Pages
- 596-601
- ISSN
- 2694-2461 (ISSN-L)
- PMC
- PMC9928410
- OpenAlex
- W4229023228
- Semantic Scholar
- 14972ab0e112215223889bdbce422276624e1bf9
- Cited by
- 38
- References
- 48
- Citations by year
- 2026: 9 · 2025: 6 · 2024: 9 · 2023: 12 · 2022: 2
- FWCI
- 1.31
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- ACS Materials Au (publishedVersion, cc-by-nc-nd)
- PubMed Central (publishedVersion, cc-by-nc-nd)
- PubMed (publishedVersion)
- OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
- Funders
- U.S. Department of Energy (DE-AC52-07NA27344)
- Topics
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Supercapacitor Materials and Fabrication
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Keywords
- direct ink writing, 3D-printed electrodes, hydrogen evolution reaction, electrocatalysis, water splitting, graphene oxide reduction, freeze-drying, electrochemically active surface area, catalyst utilization, electronic conductivity
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.