The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Highly Thermally Conductive 3D Printed Graphene Filled Polymer Composites for Scalable Thermal Management Applications
Abstract
Efficient thermal transportation in a preferred direction is highly favorable for thermal management issues. The combination of 3D printing and two-dimensional (2D) materials such as graphene, BN, and so on enables infinite possibilities for hierarchically aligned structure programming. In this work, we report the formation of the asymmetrically aligned structure of graphene filled thermoplastic polyurethane (TPU) composites during 3D printing process. The as-printed vertically aligned structure demonstrates a through-plane thermal conductivity (TC) up to 12 W m –1 K –1 at 45 wt % graphene content, which is ∼8 times of that of a horizontally printed structure and surpasses many of the traditional particle reinforced polymer composites. The superior TC is mainly attributed to the anisotropic structure design that benefited from the preferable degree of orientation of graphene and the multiscale dense structure realized by finely controlling the printing parameters. Finite element method (FEM) confirms the essential impact of anisotropic TC design for highly thermal conductive composites. This study provides an effective way to develop 3D printed graphene-based polymer composites for scalable thermal-related applications such as battery thermal management, electric packaging, and so on.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal properties of graphene and nanostructured carbon materials
Balandin, A. A. (2011) · Nature Materials · doi:10.1038/nmat3064 · Cited by 6,244
Thermal conductivity of polymer-based composites: Fundamentals and applications
Chen, H., Ginzburg, V. V., Yang, J., Yang, Y., Liu, W., Huang, Y., Du, L., & Chen, B. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.03.001 · Cited by 2,049
X-ray diffraction patterns of graphite and turbostratic carbon
Li, Z. Q., Lu, C. J., Xia, Z. P., Zhou, Y., & Luo, Z. (2007) · Carbon · doi:10.1016/j.carbon.2007.03.038 · Cited by 1,688
Recent development in 2D materials beyond graphene
Gupta, A., Sakthivel, T., & Seal, S. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.02.002 · Cited by 1,558
Graphene for batteries, supercapacitors and beyond
El-Kady, M. F., Shao, Y., & Kaner, R. B. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.33 · Cited by 1,262
Wickramasinghe, S., Do, T., & Tran, P. (2020) · Polymers · doi:10.3390/polym12071529 · Cited by 1,052
3D-printing technologies for electrochemical applications
Ambrosi, A., & Pumera, M. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00714c · Cited by 1,040
Thermal Interface Materials: Historical Perspective, Status, and Future Directions
Prasher, R. (2006) · Proceedings of the IEEE · doi:10.1109/jproc.2006.879796 · Cited by 927
Two-Dimensional Materials for Thermal Management Applications
Song, H., Liu, J., Liu, B., Wu, J., Cheng, H.-M., & Kang, F. (2018) · Joule · doi:10.1016/j.joule.2018.01.006 · Cited by 680
Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
Goh, G. D., Yap, Y. L., Agarwala, S., & Yeong, W. Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800271 · Cited by 621
Layered nanocomposites by shear-flow-induced alignment of nanosheets
Zhao, C., Zhang, P., Zhou, J., Qi, S., Yamauchi, Y., Shi, R., Fang, R., Ishida, Y., Wang, S., Tomsia, A. P., et al. (2020) · Nature · doi:10.1038/s41586-020-2161-8 · Cited by 548
Wu, S., Li, T., Tong, Z., Chao, J., Zhai, T., Xu, J., Yan, T., Wu, M., Xu, Z., Bao, H., et al. (2019) · Advanced Materials · doi:10.1002/adma.201905099 · Cited by 545
Hwang, S., Reyes, E. I., Moon, K.-S., Rumpf, R. C., & Kim, N. S. (2015) · Journal of Electronic Materials · doi:10.1007/s11664-014-3425-6 · Cited by 482
Min, P., Liu, J., Li, X., An, F., Liu, P., Shen, Y., Koratkar, N., & Yu, Z. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201805365 · Cited by 375
Yang, X., Liang, C., Ma, T., Guo, Y., Kong, J., Gu, J., Chen, M., & Zhu, J. (2018) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-018-0031-8 · Cited by 372
Performance and testing of thermal interface materials
Gwinn, J. P., & Webb, R. L. (2003) · Microelectronics Journal · doi:10.1016/s0026-2692(02)00191-x · Cited by 368
Graphene oxide dispersions: tuning rheology to enable fabrication
Naficy, S., Jalili, R., Aboutalebi, S. H., Gorkin III, R. A., Konstantinov, K., Innis, P. C., Spinks, G. M., Poulin, P., & Wallace, G. G. (2014) · Mater. Horiz. · doi:10.1039/c3mh00144j · Cited by 368
Metal-Level Thermally Conductive yet Soft Graphene Thermal Interface Materials
Dai, W., Ma, T., Yan, Q., Gao, J., Tan, X., Lv, L., Hou, H., Wei, Q., Yu, J., Wu, J., et al. (2019) · ACS Nano · doi:10.1021/acsnano.9b05163 · Cited by 348
Liu, P., Li, X., Min, P., Chang, X., Shu, C., Ding, Y., & Yu, Z.-Z. (2021) · Nano-Micro Letters · doi:10.1007/s40820-020-00548-5 · Cited by 278
Thermal Properties of the Binary‐Filler Hybrid Composites with Graphene and Copper Nanoparticles
Barani, Z., Mohammadzadeh, A., Geremew, A., Huang, C., Coleman, D., Mangolini, L., Kargar, F., & Balandin, A. A. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201904008 · Cited by 275
A novel approach to improve mechanical properties of parts fabricated by fused deposition modeling
Wang, J., Xie, H., Weng, Z., Senthil, T., & Wu, L. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.078 · Cited by 259
Advanced Polymer Designs for Direct‐Ink‐Write 3D Printing
Li, L., Lin, Q., Tang, M., Duncan, A. J. E., & Ke, C. (2019) · Chemistry – A European Journal · doi:10.1002/chem.201900975 · Cited by 258
An, F., Li, X., Min, P., Liu, P., Jiang, Z.-G., & Yu, Z.-Z. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04230 · Cited by 250
Recent advances on 3D printing graphene-based composites
Guo, H., Lv, R., & Bai, S. (2019) · Nano Materials Science · doi:10.1016/j.nanoms.2019.03.003 · Cited by 218
Self-citationGordeev, E. G., Galushko, A. S., & Ananikov, V. P. (2018) · PLOS ONE · doi:10.1371/journal.pone.0198370 · Cited by 208
Liu, J., Li, W., Guo, Y., Zhang, H., & Zhang, Z. (2019) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.02.026 · Cited by 196
Li, X.-H., Liu, P., Li, X., An, F., Min, P., Liao, K.-N., & Yu, Z.-Z. (2018) · Carbon · doi:10.1016/j.carbon.2018.09.016 · Cited by 194
Jung, H., Yu, S., Bae, N.-S., Cho, S. M., Kim, R. H., Cho, S. H., Hwang, I., Jeong, B., Ryu, J. S., Hwang, J., et al. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02681 · Cited by 186
Harris, M., Potgieter, J., Archer, R., & Arif, K. M. (2019) · Materials · doi:10.3390/ma12101664 · Cited by 173
General, Vertical, Three-Dimensional Printing of Two-Dimensional Materials with Multiscale Alignment
Liang, Z., Pei, Y., Chen, C., Jiang, B., Yao, Y., Xie, H., Jiao, M., Chen, G., Li, T., Yang, B., et al. (2019) · ACS Nano · doi:10.1021/acsnano.9b04202 · Cited by 162
Jia, Y., He, H., Geng, Y., Huang, B., & Peng, X. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.03.035 · Cited by 160
Graphene and Other 2D Colloids: Liquid Crystals and Macroscopic Fibers
Liu, Y., Xu, Z. Y., Gao, W., Cheng, Z., & Gao, C. (2017) · Advanced Materials · doi:10.1002/adma.201606794 · Cited by 156
Jing, J., Chen, Y., Shi, S., Yang, L., & Lambin, P. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126218 · Cited by 147
Lewis, J. S., Barani, Z., Magana, A. S., Kargar, F., & Balandin, A. A. (2019) · Materials Research Express · doi:10.1088/2053-1591/ab2215 · Cited by 138
Guiney, L. M., Mansukhani, N. D., Jakus, A. E., Wallace, S. G., Shah, R. N., & Hersam, M. C. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b00555 · Cited by 137
Microstructure engineering of graphene towards highly thermal conductive composites
Fang, H., Bai, S., & Wong, C. P. (2018) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2018.06.010 · Cited by 137
Self-citationRecent Advances in Thermal Interface Materials
Zhou, Y., Wu, S., Long, Y., Zhu, P., Wu, F., Liu, F., Murugadoss, V., Winchester, W., Nautiyal, A., Wang, Z., et al. (2020) · ES Materials & Manufacturing · doi:10.30919/esmm5f717 · Cited by 113
Waheed, S., Cabot, J. M., Šmejkal, P., Farajikhah, S., Sayyar, S., Innis, P. C., Beirne, S., Barnsley, G., Lewis, T. W., Breadmore, M. C., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b18232 · Cited by 96
Graphene based silicone thermal greases
Yu, W., Xie, H., Chen, L., Zhu, Z., Zhao, J., & Zhang, Z. (2013) · Physics Letters A · doi:10.1016/j.physleta.2013.10.017 · Cited by 84
Wang, J., Mubarak, S., Dhamodharan, D., Divakaran, N. C., Wu, L., & Zhang, X. (2020) · Composites Communications · doi:10.1016/j.coco.2020.03.012 · Cited by 83
Wu, K., Liu, D., Lei, C., Xue, S., & Fu, Q. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124929 · Cited by 78
High thermal conductive epoxy based composites fabricated by multi-material direct ink writing
Liu, J., Guo, Y., Weng, C., Zhang, H., & Zhang, Z. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.105684 · Cited by 71
Zhang, M., Guo, R., Chen, K., Wang, Y., Niu, J., Guo, Y., Zhang, Y., Yin, Z., Xia, K., Zhou, B., et al. (2020) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2003079117 · Cited by 70
Lv, L., Dai, W., Li, A., & Lin, C. (2018) · Polymers · doi:10.3390/polym10111201 · Cited by 56
Kotsilkova, R., Ivanov, E., Georgiev, V., Ivanova, R., Menseidov, D., Batakliev, T., Angelov, V., Xia, H., Chen, Y., Bychanok, D. S., et al. (2020) · Polymers · doi:10.3390/polym12061208 · Cited by 34
Smith, M. K., Kim, S., Lambert, A., Walde, M., Lindahl, J. M., Mungale, K., Bougher, T. L., Hassen, A. A., & Kunc, V. (2019) · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems · doi:10.1109/itherm.2019.8757285 · Cited by 31
Cited by
Wang, Z., Wu, Z., Weng, L., Ge, S., Jiang, D., Huang, M., Mulvihill, D. M., Chen, Q., Guo, Z., Jazzar, A., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202301549 · Cited by 419
Metadata
- Authors
- Guo, H., Zhao, H., Niu, H., Ren, Y., Fang, H., Fang, X., Lv, R., Maqbool, M., & Bai, S.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-04-15
- Volume
- 15
- Issue
- 4
- Pages
- 6917-6928
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W3154406638
- Cited by
- 287
- References
- 46
- FWCI
- 14.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.