The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Ti3C2Tx MXene-Decorated Nanoporous Polyethylene Textile for Passive and Active Personal Precision Heating
Abstract
Heating the human body to maintain a relatively constant temperature is pivotal for various human functions. However, most of the current heating strategies are energy-consuming and energy-wasting and cannot cope with the complex and changing environment. Developing materials and systems that can heat the human body precisely via an efficient energy-saving approach no matter indoors/outdoors, day/night, and sunny/cloudy is highly anticipated for mitigating the growing energy crisis and global warming but is still a great challenge. Here, we demonstrate the low mid-infrared radiative (mid-IR) emissivity characteristic of Ti 3 C 2 T x MXene and then apply it for energy-free passive radiative heating (PRH) on the human body. Our strategy is realized by simply decorating the cheap nanoporous polyethylene (nanoPE) textile with MXene. Impressively, the as-obtained 12 μm thick MXene/nanoPE textile shows a low mid-IR emissivity of 0.176 at 7–14 μm and outstanding indoor PRH performance on the human body, which enhances by 4.9 °C compared with that of traditional 576 μm thick cotton textile. Meanwhile, the MXene/nanoPE textile exhibits excellent active outdoor solar heating and indoor/outdoor Joule heating capability. The three heating modes integrated in this wearable MXene/nanoPE heating system can be switched easily or combined arbitrarily, making this thin heating system able to heat the human body precisely in various scenarios like indoors/outdoors, day/night, and sunny/cloudy, providing multiple promising and energy-saving solutions for future all-day personal precision thermal management.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Opportunities and challenges for a sustainable energy future
Chu, S., & Majumdar, A. (2012) · Nature · doi:10.1038/nature11475 · Cited by 12,550
A review on buildings energy consumption information
Pérez-Lombard, L., Ortiz, J., & Pout, C. (2008) · Energy and Buildings · doi:10.1016/j.enbuild.2007.03.007 · Cited by 6,649
Electromagnetic interference shielding with 2D transition metal carbides (MXenes)
Shahzad, F., Alhabeb, M., Hatter, C. B., Anasori, B., Man Hong, S., Koo, C. M., & Gogotsi, Y. (2016) · Science · doi:10.1126/science.aag2421 · Cited by 5,201
Antibacterial Activity of Ti3C2Tx MXene
Rasool, K., Helal, M., Ali, A., Ren, C. E., Gogotsi, Y., & Mahmoud, K. A. (2016) · ACS Nano · doi:10.1021/acsnano.6b00181 · Cited by 1,449
Radiative human body cooling by nanoporous polyethylene textile
Hsu, P.-C., Song, A. Y., Catrysse, P. B., Liu, C., Peng, Y., Xie, J., Fan, S., & Cui, Y. (2016) · Science · doi:10.1126/science.aaf5471 · Cited by 1,222
Advanced Textiles for Personal Thermal Management and Energy
Peng, Y., & Cui, Y. (2020) · Joule · doi:10.1016/j.joule.2020.02.011 · Cited by 747
A dual-mode textile for human body radiative heating and cooling
Hsu, P.-C., Liu, C., Song, A. Y., Zhang, Z., Peng, Y., Xie, J., Liu, K., Wu, C.-L., Catrysse, P. B., Cai, L., et al. (2017) · Science Advances · doi:10.1126/sciadv.1700895 · Cited by 650
Personal Thermal Management by Metallic Nanowire-Coated Textile
Hsu, P.-C., Liu, X., Liu, C., Xie, X., Lee, H. R., Welch, A. J., Zhao, T., & Cui, Y. (2015) · Nano Letters · doi:10.1021/nl5036572 · Cited by 544
Dynamic gating of infrared radiation in a textile
Zhang, X. A., Yu, S., Xu, B., Li, M., Peng, Z., Wang, Y., Deng, S., Wu, X., Wu, Z., Ouyang, M., et al. (2019) · Science · doi:10.1126/science.aau1217 · Cited by 544
Warming up human body by nanoporous metallized polyethylene textile
Cai, L., Song, A. Y., Wu, P., Hsu, P.-C., Peng, Y., Chen, J., Liu, C., Catrysse, P. B., Liu, Y., Yang, A., et al. (2017) · Nature Communications · doi:10.1038/s41467-017-00614-4 · Cited by 421
Infrared-Transparent Visible-Opaque Fabrics for Wearable Personal Thermal Management
Tong, J. K., Huang, X., Boriskina, S. V., Loomis, J., Xu, Y., & Chen, G. (2015) · ACS Photonics · doi:10.1021/acsphotonics.5b00140 · Cited by 380
Switchable Cavitation in Silicone Coatings for Energy‐Saving Cooling and Heating
Zhao, H., Sun, Q., Zhou, J., Deng, X., & Cui, J. (2020) · Advanced Materials · doi:10.1002/adma.202000870 · Cited by 281
Photonic thermal management of coloured objects
Li, W., Shi, Y., Chen, Z., & Fan, S. (2018) · Nature Communications · doi:10.1038/s41467-018-06535-0 · Cited by 278
Regulation of Heat Loss from the Human Body
Hardy, J. D., & DuBois, E. F. (1937) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.23.12.624 · Cited by 228
An ultra-thin colored textile with simultaneous solar and passive heating abilities
Luo, H., Li, Q., Du, K., Xu, Z., Zhu, H., Liu, D., Cai, L., Ghosh, P., & Qiu, M. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.103998 · Cited by 176
Yue, X., Zhang, T., Yang, D., Qiu, F., Wei, G., & Zhou, H. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.06.004 · Cited by 175
MÄKINEN, T. M., & HASSI, J. (2009) · Industrial Health · doi:10.2486/indhealth.47.207 · Cited by 166
Guo, Y., Li, K., Hou, C., Li, Y., Zhang, Q., & Wang, H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b11622 · Cited by 162
Temperature dependent emissivity of different stainless steel textiles in the infrared range
Larciprete, M. C., Gloy, Y.-S., Voti, R. L., Cesarini, G., Leahu, G., Bertolotti, M., & Sibilia, C. (2016) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2016.12.001 · Cited by 45
Highly Conductive MXene Film Actuator Based on Moisture Gradients
Wang, J., Liu, Y., Cheng, Z., Xie, Z., Yin, L., Wang, W., Song, Y., Zhang, H., Wang, Y., & Fan, Z. (2020) · Angewandte Chemie · doi:10.1002/ange.202003737 · Cited by 16
Self-citation
Metadata
- Authors
- Shi, M., Shen, M., Guo, X., Jin, X., Cao, Y., Yang, Y., Wang, W., & Wang, J.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-06-24
- Volume
- 15
- Issue
- 7
- Pages
- 11396-11405
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W3175802517
- Cited by
- 268
- References
- 20
- FWCI
- 24.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
