The DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
Monitoring Ti3C2Tx MXene Degradation Pathways Using Raman Spectroscopy
Open accessAbstract
High Resolution Image Download MS PowerPoint Slide Extending applications of Ti 3 C 2 T x MXene in nanocomposites and across fields of electronics, energy storage, energy conversion, and sensor technologies necessitates simple and efficient analytical methods. Raman spectroscopy is a critical tool for assessing MXene composites; however, high laser powers and temperatures can lead to the materials’ deterioration during the analysis. Therefore, an in-depth understanding of MXene photothermal degradation and changes in its oxidation state is required, but no systematic studies have been reported. The primary aim of this study was to investigate the degradation of the MXene lattice through Raman spectroscopic analysis. Distinct spectral markers were related to structural alterations within the Ti 3 C 2 T x material after subjecting it to thermal- and laser-induced degradation. During the degradation processes, spectral markers were revealed for several specific steps: a decrease in the number of interlayer water molecules, a decrease in the number of −OH groups, formation of C–C bonds, oxidation of the lattice, and formation of TiO 2 nanoparticles (first anatase, followed by rutile). By tracking of position shifts and intensity changes for Ti 3 C 2 T x, the spectral markers that signify the initiation of each step were found. This spectroscopic approach enhances our understanding of the degradation pathways of MXene, and facilitating enhanced and dependable integration of these materials into devices for diverse applications, from energy storage to sensors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
Self-citation2D metal carbides and nitrides (MXenes) for energy storage
Anasori, B., Lukatskaya, M. R., & Gogotsi, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.98 · Cited by 7,440
Self-citationGuidelines for Synthesis and Processing of Two-Dimensional Titanium Carbide (Ti3C2Tx MXene)
Alhabeb, M., Maleski, K., Anasori, B., Lelyukh, P., Clark, L., Sin, S., & Gogotsi, Y. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02847 · Cited by 5,045
Self-citationGogotsi, Y., & Anasori, B. (2019) · ACS Nano · doi:10.1021/acsnano.9b06394 · Cited by 2,541
Self-citationLipatov, A., Alhabeb, M., Lukatskaya, M. R., Boson, A., Gogotsi, Y., & Sinitskii, A. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201600255 · Cited by 1,751
Self-citationOxidation Stability of Colloidal Two-Dimensional Titanium Carbides (MXenes)
Zhang, C. J., Pinilla, S., McEvoy, N., Cullen, C. P., Anasori, B., Long, E., Park, S.-H., Seral-Ascaso, A., Shmeliov, A., Krishnan, D., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00745 · Cited by 1,725
Self-citationXie, Y., Naguib, M., Mochalin, V. N., Barsoum, M. W., Gogotsi, Y., Yu, X., Nam, K.-W., Yang, X.-Q., Kolesnikov, A. I., & Kent, P. R. C. (2014) · Journal of the American Chemical Society · doi:10.1021/ja501520b · Cited by 1,537
Self-citationRaman Spectroscopy Analysis of the Structure and Surface Chemistry of Ti3C2T x MXene
Sarycheva, A., & Gogotsi, Y. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c00359 · Cited by 1,467
Self-citationPrinciples of Surface-Enhanced Raman Spectroscopy: and Related Plasmonic Effects
Ru, E. C. L., & Etchegoin, P. (2008) · Cited by 1,455
Control of MXenes’ electronic properties through termination and intercalation
Hart, J. L., Hantanasirisakul, K., Lang, A. C., Anasori, B., Pinto, D., Pivak, Y., van Omme, J. T., May, S. J., Gogotsi, Y., & Taheri, M. L. (2019) · Nature Communications · doi:10.1038/s41467-018-08169-8 · Cited by 1,342
Self-citationModified MAX Phase Synthesis for Environmentally Stable and Highly Conductive Ti 3 C 2 MXene
Mathis, T. S., Maleski, K., Goad, A., Sarycheva, A., Anayee, M., Foucher, A. C., Hantanasirisakul, K., Shuck, C. E., Stach, E. A., & Gogotsi, Y. (2021) · ACS Nano · doi:10.1021/acsnano.0c08357 · Cited by 1,001
Self-citationHan, M., Yin, X., Wu, H., Hou, Z., Song, C., Li, X., Zhang, L., & Cheng, L. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b06455 · Cited by 996
Highly Conductive Optical Quality Solution‐Processed Films of 2D Titanium Carbide
Dillon, A. D., Ghidiu, M. J., Krick, A. L., Griggs, J., May, S. J., Gogotsi, Y., Barsoum, M. W., & Fafarman, A. T. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201600357 · Cited by 988
Self-citationNanostructured electrocatalysts with tunable activity and selectivity
Mistry, H., Varela, A. S., Kühl, S., Strasser, P., & Cuenya, B. R. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.9 · Cited by 865
Fabrication of Ti3C2Tx MXene Transparent Thin Films with Tunable Optoelectronic Properties
Hantanasirisakul, K., Zhao, M., Urbankowski, P., Halim, J., Anasori, B., Kota, S., Ren, C. E., Barsoum, M. W., & Gogotsi, Y. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201600050 · Cited by 838
Self-citationNaguib, M., Mashtalir, O., Lukatskaya, M. R., Dyatkin, B., Zhang, C., Presser, V., Gogotsi, Y., & Barsoum, M. W. (2014) · Chem. Commun. · doi:10.1039/c4cc01646g · Cited by 800
Self-citationHighly Self-Healable 3D Microsupercapacitor with MXene–Graphene Composite Aerogel
Yue, Y., Liu, N., Ma, Y., Wang, S., Liu, W., Luo, C., Zhang, H., Cheng, F., Rao, J., Hu, X., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b07528 · Cited by 736
Hu, T., Wang, J., Zhang, H., Li, Z., Hu, M., & Wang, X. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp05666c · Cited by 652
2D Metal Carbides and Nitrides (MXenes): Structure, Properties and Applications
(2019) · Springer eBooks · doi:10.1007/978-3-030-19026-2 · Cited by 496
Wang, H.-W., Naguib, M., Page, K., Wesolowski, D. J., & Gogotsi, Y. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04250 · Cited by 495
Self-citationSmith, M. W., Dallmeyer, I., Johnson, T. J., Brauer, C. S., McEwen, J.-S., Espinal, J. F., & Garcia-Perez, M. (2016) · Carbon · doi:10.1016/j.carbon.2016.01.031 · Cited by 466
Size-Dependent Physical and Electrochemical Properties of Two-Dimensional MXene Flakes
Maleski, K., Ren, C. E., Zhao, M.-Q., Anasori, B., & Gogotsi, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04662 · Cited by 461
Self-citationTi3C2Tx MXene-Based Flexible Piezoresistive Physical Sensors
Wang, Y., Yue, Y., Cheng, F., Cheng, Y., Ge, B., Liu, N., & Gao, Y. (2022) · ACS Nano · doi:10.1021/acsnano.1c09925 · Cited by 406
Prospects challenges and stability of 2D MXenes for clean energy conversion and storage applications
Bhat, A., Anwer, S., Bhat, K. S., Mohideen, M. I. H., Liao, K., & Qurashi, A. (2021) · npj 2D Materials and Applications · doi:10.1038/s41699-021-00239-8 · Cited by 385
Benchakar, M., Loupias, L., Garnero, C., Bilyk, T., Morais, C., Canaff, C., Guignard, N., Morisset, S., Pazniak, H., Hurand, S., et al. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.147209 · Cited by 384
Ghassemi, H., Harlow, W., Mashtalir, O., Beidaghi, M., Lukatskaya, M. R., Gogotsi, Y., & Taheri, M. L. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta02583k · Cited by 378
Self-citationFrey, N. C., Wang, J., Vega Bellido, G. I., Anasori, B., Gogotsi, Y., & Shenoy, V. B. (2019) · ACS Nano · doi:10.1021/acsnano.8b08014 · Cited by 346
Self-citationLotfi, R., Naguib, M., Yilmaz, D. E., Nanda, J., & van Duin, A. C. T. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta01468j · Cited by 324
Environment-Sensitive Photoresponse of Spontaneously Partially Oxidized Ti3C2 MXene Thin Films
Chertopalov, S., & Mochalin, V. N. (2018) · ACS Nano · doi:10.1021/acsnano.8b02379 · Cited by 308
Ambient oxidation of Ti 3 C 2 MXene initialized by atomic defects
Xia, F., Lao, J., Yu, R., Sang, X., Luo, J., Li, Y., & Wu, J. (2019) · Nanoscale · doi:10.1039/c9nr07236e · Cited by 308
Ibragimova, R., Erhart, P., Rinke, P., & Komsa, H. (2021) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.0c03710 · Cited by 274
MXene–Silicon Van Der Waals Heterostructures for High‐Speed Self‐Driven Photodetectors
Kang, Z., Ma, Y., Tan, X., Zhu, M., Zheng, Z., Liu, N., Li, L., Zou, Z., Jiang, X., Zhai, T., et al. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201700165 · Cited by 241
MXene terminating groups O, –F or –OH, –F or O, –OH, –F, or O, –OH, –Cl?
Bashir, T., Ismail, S. A., Wang, J., Zhu, W., Zhao, J., & Gao, L. (2023) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2022.08.032 · Cited by 234
Structure of Nanocrystalline Ti3C2 MXene Using Atomic Pair Distribution Function
Shi, C., Beidaghi, M., Naguib, M., Mashtalir, O., Gogotsi, Y. G., & Billinge, S. J. L. (2014) · Physical Review Letters · doi:10.1103/physrevlett.112.125501 · Cited by 233
Self-citationHu, T., Hu, M., Gao, B., Li, W., & Wang, X. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b04427 · Cited by 230
Electrochromic Effect in Titanium Carbide MXene Thin Films Produced by Dip‐Coating
Salles, P., Pinto, D., Hantanasirisakul, K., Maleski, K., Shuck, C. E., & Gogotsi, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201809223 · Cited by 215
Self-citationIn situ monitoring redox processes in energy storage using UV–Vis spectroscopy
Zhang, D., Wang, R. J., Wang, X., & Gogotsi, Y. G. (2023) · Nature Energy · doi:10.1038/s41560-023-01240-9 · Cited by 167
Self-citationLee, S., Kim, E. H., Yu, S., Kim, H., Park, C., Lee, S. W., Han, H., Jin, W., Lee, K., Lee, C. E., et al. (2021) · ACS Nano · doi:10.1021/acsnano.1c01621 · Cited by 138
A perspective on MXenes: Their synthesis, properties, and recent applications
Papadopoulou, K., Chroneos, A., Parfitt, D., & Christopoulos, S. G. (2020) · Journal of Applied Physics · doi:10.1063/5.0021485 · Cited by 134
Li, H., Chen, S., Boukhvalov, D. W., Yu, Z., Humphrey, M. G., Huang, Z., & Zhang, C. (2022) · ACS Nano · doi:10.1021/acsnano.1c07060 · Cited by 111
Raman spectra of 2D titanium carbide MXene from machine-learning force field molecular dynamics
Berger, E., Lv, Z., & Komsa, H. (2022) · Journal of Materials Chemistry C · doi:10.1039/d2tc04374b · Cited by 111
Effects of annealing on the microstructures and photoactivity of fluorinated N-doped TiO2.
Liu, S.-W., Yu, J.-G., & Wang, W.-G. (2010) · Physical Chemistry, Chemical Physics - PCCP · doi:10.1039/c0cp00036a · Cited by 103
Halim, J., Persson, I., Eklund, P., Persson, P. O. Å., & Rosén, J. (2018) · RSC Advances · doi:10.1039/c8ra07270a · Cited by 90
Thermal degradation kinetics study of molten polylactide based on Raman spectroscopy
Lin, Z., Guo, X., He, Z., Liang, X., Wang, M., & Jin, G. (2020) · Polymer Engineering and Science · doi:10.1002/pen.25568 · Cited by 82
Zhang, Z., Yao, Z., Zhang, X., & Jiang, Z. (2020) · Electrochimica Acta · doi:10.1016/j.electacta.2020.136960 · Cited by 77
Adomavičiũtė-Grabusovė, S., Ramanavičius, S., Popov, A., Šablinskas, V., Gogotsi, O. G., & Ramanavičius, A. (2021) · Chemosensors · doi:10.3390/chemosensors9080223 · Cited by 58
Self-citationJohnson, D., Hansen, K., Yoo, R. M. S., & Djire, A. (2022) · ChemElectroChem · doi:10.1002/celc.202200555 · Cited by 38
Charge storage improvement in uniformly grown TiO2 on Ti3C2Tx MXene surface
Kumar, S., Aftab, S., Singh, T., Kumar, M., Kumar, S., & Seo, Y. (2023) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2023.172181 · Cited by 30
MXene-Based Ceramic Nanocomposites Enabled by Pressure-Assisted Sintering
Ratzker, B., Messer, O., Favelukis, B., et al. (2022) · ACS Nano · doi:10.1021/acsnano.2c05774 · Cited by 27
Bulk Superlattice Analogues for Energy Conversion
Bai, W. Y., Xiao, C., & Xie, Y. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.1c09235 · Cited by 25
Jing, H., Zhao, P. F., Liu, C., Wu, Z., Yu, J., Liu, B., Su, C., Wu, L., & Hao, Q. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c14682 · Cited by 23
Bioinspired Moisture-Driven Soft Actuators Based on MXene/Aramid Nanofiber Nanocomposite Films
Weng, X., Weng, Z., Qin, M., Zhang, J., Wu, Y., & Jiang, H. M. (2024) · ACS Applied Nano Materials · doi:10.1021/acsanm.4c00420 · Cited by 21
Mikulics, M., Adam, R., Sobolewski, R., Heidtfeld, S. F., Cao, D., Bürgler, D. E., Schneider, C. M., Mayer, J., & Hardtdegen, H. H. (2022) · FlatChem · doi:10.1016/j.flatc.2022.100447 · Cited by 13
Determination of Thermal Damage Threshold in THz Photomixers Using Raman Spectroscopy
Mikulics, M., Adam, R., Chen, G., Chakraborty, D., Cheng, J., Pericolo, A., Komissarov, I., Bürgler, D. E., Heidtfeld, S. F., Serafini, J. R., et al. (2023) · Crystals · doi:10.3390/cryst13081267 · Cited by 9
Cited by
Li, H., Su, Y., Guo, T., Zheng, H., Sun, B., Yu, C., Cao, J., Li, Q., & Si, W. (2025) · Next Energy · doi:10.1016/j.nxener.2025.100338 · Cited by 4
Metadata
- Authors
- Adomaviciute-Grabusove, S., Popov, A., Ramanavicius, S., Sablinskas, V., Shevchuk, K., Gogotsi, O., Baginskiy, I., Gogotsi, Y., & Ramanavicius, A.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2024-05-06
- Volume
- 18
- Issue
- 20
- Pages
- 13184-13195
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W4396665287
- Cited by
- 283
- References
- 55
- FWCI
- 26.77
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
