The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Two-Dimensional Titanium Nitride (Ti2N) MXene: Synthesis, Characterization, and Potential Application as Surface-Enhanced Raman Scattering Substrate
Abstract
We report on the synthesis, characterization, and application of Ti 2 N (MXene), a two-dimensional transition metal nitride of M 2 X type. Synthesis of nitride-based MXenes (M n +1 N n ) is difficult due to their higher formation energy from M n +1 AN n and poor stability of M n +1 N n layers in the etchant employed, typically HF. Herein, the selective etching of Al from ternary layered transition metal nitride Ti 2 AlN (MAX) and intercalation were achieved by immersing the powder in a mixture of potassium fluoride and hydrochloric acid. The multilayered Ti 2 NT x (T is the surface termination) obtained was sonicated in DMSO and centrifuged to obtain few-layered Ti 2 NT x . MXene formation was verified, and the material was completely characterized by Raman spectroscopy, XRD, XPS, FESEM-EDS, TEM, STM, and AFM techniques. Surface-enhanced Raman scattering (SERS) activity of the synthesized Ti 2 NT x was investigated by fabricating paper, silicon, and glass-based SERS substrates. A Raman enhancement factor of 10 12 was demonstrated using rhodamine 6G as the model compound with 532 nm excitation wavelength. Detection of trace level explosives with a simple paper-based SERS substrate with Ti 2 N (MXene) as active material was also illustrated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geim, A. K., & Novoselov, K. S. (2007) · Nature Materials · doi:10.1038/nmat1849 · Cited by 39,979
Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene
Lee, C., Wei, X., Kysar, J. W., & Hone, J. (2008) · Science · doi:10.1126/science.1157996 · Cited by 20,847
Electronics and optoelectronics of two-dimensional transition metal dichalcogenides
Wang, Q. H., Kalantar-Zadeh, K., Kis, A., Coleman, J. N., & Strano, M. S. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.193 · Cited by 16,374
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
2D metal carbides and nitrides (MXenes) for energy storage
Anasori, B., Lukatskaya, M. R., & Gogotsi, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.98 · Cited by 7,440
25th Anniversary Article: MXenes: A New Family of Two‐Dimensional Materials
Naguib, M., Mochalin, V. N., Barsoum, M. W., & Gogotsi, Y. (2014) · Advanced Materials · doi:10.1002/adma.201304138 · Cited by 6,414
Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance
Ghidiu, M., Lukatskaya, M. R., Zhao, M.-Q., Gogotsi, Y., & Barsoum, M. W. (2014) · Nature · doi:10.1038/nature13970 · Cited by 5,997
Surface Enhanced Raman Scattering Enhancement Factors: A Comprehensive Study
Le Ru, E. C., Blackie, E., Meyer, M., & Etchegoin, P. G. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp0687908 · Cited by 2,853
Atomic layers of hybridized boron nitride and graphene domains
Ci, L., Song, L., Jin, C., Jariwala, D., Wu, D., Li, Y., Srivastava, A., Wang, Z. F., Storr, K., Balicas, L., et al. (2010) · Nature Materials · doi:10.1038/nmat2711 · Cited by 2,166
X-ray photoelectron spectroscopy of select multi-layered transition metal carbides (MXenes)
Halim, J., Cook, K. M., Naguib, M., Eklund, P., Gogotsi, Y., Rosen, J., & Barsoum, M. W. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2015.11.089 · Cited by 2,047
Cited by
The world of two-dimensional carbides and nitrides (MXenes)
VahidMohammadi, A., Rosen, J., & Gogotsi, Y. (2021) · Science · doi:10.1126/science.abf1581 · Cited by 3,191
Electronic and Optical Properties of 2D Transition Metal Carbides and Nitrides (MXenes)
Hantanasirisakul, K., & Gogotsi, Y. (2018) · Advanced Materials · doi:10.1002/adma.201804779 · Cited by 1,325
Ten Years of Progress in the Synthesis and Development of MXenes
Naguib, M., Barsoum, M. W., & Gogotsi, Y. (2021) · Advanced Materials · doi:10.1002/adma.202103393 · Cited by 1,257
Fundamentals of MXene synthesis
Lim, K. R. G., Shekhirev, M., Wyatt, B. C., Anasori, B., Gogotsi, Y., & Seh, Z. W. (2022) · Nature Synthesis · doi:10.1038/s44160-022-00104-6 · Cited by 1,236
Advances in the Synthesis of 2D MXenes
Wei, Y., Zhang, P., Soomro, R. A., Zhu, Q., & Xu, B. (2021) · Advanced Materials · doi:10.1002/adma.202103148 · Cited by 1,216
Two-dimensional transition metal carbides and nitrides (MXenes) for biomedical applications
Huang, K., Li, Z., Lin, J., Han, G., & Huang, P. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00838d · Cited by 1,100
Transition metal nitrides for electrochemical energy applications
Wang, H., Li, J., Li, K., Lin, Y., Chen, J., Gao, L., Nicolosi, V., Xiao, X., & Lee, J.-M. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00415d · Cited by 983
Cao, M.-S., Cai, Y.-Z., He, P., Shu, J.-C., Cao, W.-Q., & Yuan, J. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.11.051 · Cited by 979
Jiang, X., Kuklin, A. V., Baev, A., Ge, Y., Ågren, H., Zhang, H., & Prasad, P. N. (2020) · Physics Reports · doi:10.1016/j.physrep.2019.12.006 · Cited by 914
Recent developments in emerging two-dimensional materials and their applications
Khan, K., Tareen, A. K., Aslam, M., Wang, R., Zhang, Y., Mahmood, A., Ouyang, Z., Zhang, H., & Guo, Z. (2020) · Journal of Materials Chemistry C · doi:10.1039/c9tc04187g · Cited by 886
Characterization of MXenes at every step, from their precursors to single flakes and assembled films
Shekhirev, M., Shuck, C. E., Sarycheva, A., & Gogotsi, Y. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100757 · Cited by 752
Xu, D., Li, Z., Li, L., & Wang, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000712 · Cited by 744
Deysher, G., Shuck, C. E., Hantanasirisakul, K., Frey, N. C., Foucher, A. C., Maleski, K., Sarycheva, A., Shenoy, V. B., Stach, E. A., Anasori, B., et al. (2020) · ACS Nano · doi:10.1021/acsnano.9b07708 · Cited by 720
Synthesis, structure, properties and applications of MXenes: Current status and perspectives
Ronchi, R. M., Arantes, J. T., & Santos, S. F. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.06.114 · Cited by 698
Zhang, C. (., Ma, Y., Zhang, X., Abdolhosseinzadeh, S., Sheng, H., Lan, W., Pakdel, A., Heier, J., & Nüesch, F. (2020) · ENERGY & ENVIRONMENTAL MATERIALS · doi:10.1002/eem2.12058 · Cited by 605
Overview of the synthesis of MXenes and other ultrathin 2D transition metal carbides and nitrides
Verger, L., Xu, C., Natu, V., Cheng, H.-M., Ren, W., & Barsoum, M. W. (2019) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2019.02.001 · Cited by 600
Rasool, K., Pandey, R. P., Rasheed, P. A., Buczek, S., Gogotsi, Y., & Mahmoud, K. A. (2019) · Materials Today · doi:10.1016/j.mattod.2019.05.017 · Cited by 590
Urbankowski, P., Anasori, B., Hantanasirisakul, K., Yang, L., Zhang, L., Haines, B., May, S. J., Billinge, S. J. L., & Gogotsi, Y. (2017) · Nanoscale · doi:10.1039/c7nr06721f · Cited by 511
MXenes: An Introduction of Their Synthesis, Select Properties, and Applications
Verger, L., Natu, V., Carey, M., & Barsoum, M. W. (2019) · Trends in Chemistry · doi:10.1016/j.trechm.2019.04.006 · Cited by 499
Kumar, J. A., Prakash, P., Krithiga, T., Amarnath, D. J., Premkumar, J., Rajamohan, N., Vasseghian, Y., Saravanan, P., & Rajasimman, M. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2021.131607 · Cited by 492
Xing, C., Chen, S., Liang, X., Liu, Q., Qu, M., Zou, Q., Li, J., Tan, H., Liu, L., Fan, D., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b08314 · Cited by 488
Panda, S., Deshmukh, K., Khadheer Pasha, S. K., Theerthagiri, J., Manickam, S., & Choi, M. Y. (2022) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2022.214518 · Cited by 465
MXenes for Rechargeable Batteries Beyond the Lithium‐Ion
Ming, F., Liang, H., Huang, G., Bayhan, Z., & Alshareef, H. N. (2021) · Advanced Materials · doi:10.1002/adma.202004039 · Cited by 424
Zhang, Q., Yi, G., Fu, Z., Yu, H., Chen, S., & Quan, X. (2019) · ACS Nano · doi:10.1021/acsnano.9b06180 · Cited by 420
Recent advances in MXenes: From fundamentals to applications
Khazaei, M., Mishra, A., Venkataramanan, N. S., Singh, A. K., & Yunoki, S. (2019) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2019.01.002 · Cited by 408
Rational Design of Flexible Two-Dimensional MXenes with Multiple Functionalities
Fu, Z., Wang, N., Legut, D., Si, C., Zhang, Q., Du, S., Germann, T. C., Francisco, J. S., & Zhang, R. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00348 · Cited by 396
Perspectives on solution processing of two-dimensional MXenes
Abdolhosseinzadeh, S., Jiang, X., Zhang, H., Qiu, J., & Zhang, C. (. (2021) · Materials Today · doi:10.1016/j.mattod.2021.02.010 · Cited by 386
Interface Chemistry on MXene‐Based Materials for Enhanced Energy Storage and Conversion Performance
Hui, X., Ge, X., Zhao, R., Li, Z., & Yin, L. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202005190 · Cited by 385
Wang, H., Zhou, R., Li, D., Zhang, L., Ren, G., Wang, L., Liu, J., Wang, D., Tang, Z., Lu, G., et al. (2021) · ACS Nano · doi:10.1021/acsnano.1c00259 · Cited by 364
MXene as emerging nanofillers for high-performance polymer composites: A review
Gong, K., Zhou, K., Qian, X., Shi, C., & Yu, B. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108867 · Cited by 362
MXene‐Based Composites: Synthesis and Applications in Rechargeable Batteries and Supercapacitors
Yang, J., Bao, W., Jaumaux, P., Zhang, S., Wang, C., & Wang, G. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201802004 · Cited by 331
MXenes: Synthesis, Optical Properties, and Applications in Ultrafast Photonics
Fu, B., Sun, J., Wang, C., Shang, C., Xu, L., Li, J., & Zhang, H. (2021) · Small · doi:10.1002/smll.202006054 · Cited by 328
Surface Enhanced Raman Scattering Revealed by Interfacial Charge-Transfer Transitions
Cong, S., Liu, X., Jiang, Y., Zhang, W., & Zhao, Z. (2020) · The Innovation · doi:10.1016/j.xinn.2020.100051 · Cited by 326
MXenes: Emerging 2D materials for hydrogen storage
Kumar, P., Singh, S., Hashmi, S. A. R., & Kim, K.-H. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.105989 · Cited by 326
Topochemical synthesis of 2D materials
Xiao, X., Wang, H., Urbankowski, P., & Gogotsi, Y. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00649k · Cited by 317
Recent Advances in 2D Inorganic Nanomaterials for SERS Sensing
Karthick Kannan, P., Shankar, P., Blackman, C., & Chung, C. (2019) · Advanced Materials · doi:10.1002/adma.201803432 · Cited by 289
MXenes: A comprehensive review of synthesis, properties, and progress in supercapacitor applications
Akhter, R., & Maktedar, S. S. (2023) · Journal of Materiomics · doi:10.1016/j.jmat.2023.08.011 · Cited by 286
Huang, H., Feng, W., & Chen, Y. (2021) · Chemical Society Reviews · doi:10.1039/d0cs01138j · Cited by 285
Deshmukh, K., Kovářík, T., & Khadheer Pasha, S. K. (2020) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2020.213514 · Cited by 282
Theory-guided materials design: two-dimensional MXenes in electro- and photocatalysis
Handoko, A. D., Steinmann, S. N., & Seh, Z. W. (2019) · Nanoscale Horizons · doi:10.1039/c9nh00100j · Cited by 279
Guselnikova, O., Lim, H., Kim, H., Kim, S. H., Gorbunova, A., Eguchi, M., Postnikov, P., Nakanishi, T., Asahi, T., Na, J., et al. (2022) · Small · doi:10.1002/smll.202107182 · Cited by 263
Ren, X., Huo, M., Wang, M., Lin, H., Zhang, X., Yin, J., Chen, Y., & Chen, H. (2019) · ACS Nano · doi:10.1021/acsnano.8b09327 · Cited by 262
Djire, A., Wang, X., Xiao, C., Nwamba, O. C., Mirkin, M. V., & Neale, N. R. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202001136 · Cited by 104
Metadata
- Authors
- Soundiraraju, B., & George, B. K.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-09-05
- Volume
- 11
- Issue
- 9
- Pages
- 8892-8900
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2750572535
- Cited by
- 754
- References
- 27
- FWCI
- 15.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.