Dynamics of Cellulose Nanocrystal Alignment during 3D Printing
The DOI matches its Crossref record; 85 of the 85 references it cites were found in a registry or an index.
Abstract
The alignment of anisotropic particles during ink deposition directly affects the microstructure and properties of materials manufactured by extrusion-based 3D printing. Although particle alignment in diluted suspensions is well described by analytical and numerical models, the dynamics of particle orientation in the highly concentrated inks typically used for printing via direct ink writing (DIW) remains poorly understood. Using cellulose nanocrystals (CNCs) as model building blocks of increasing technological relevance, we study the dynamics of particle alignment under the shear stresses applied to concentrated inks during DIW. With the help of in situ polarization rheology, we find that the time period needed for particle alignment scales inversely with the applied shear rate and directly with the particle concentration. Such dependences can be quantitatively described by a simple scaling relation and qualitatively interpreted in terms of steric and hydrodynamic interactions between particles at high shear rates and particle concentrations. Our understanding of the alignment dynamics is then utilized to estimate the effect of shear stresses on the orientation of particles during the printing process. Finally, proof-of-concept experiments show that the combination of shear and extensional flow in 3D printing nozzles of different geometries provides an effective means to tune the orientation of CNCs from fully aligned to core-shell architectures. These findings offer powerfu…
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“To achieve this, we exploited the shear thinning property of FIG inks (Supplementary Fig. 2h–i), which is not only essential for printing, but also for inducing fiber alignment along the direction of printing40.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [40]
Citations
Cites
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980
The motion of ellipsoidal particles immersed in a viscous fluid
Jeffery, G. B. (1922) · Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character · doi:10.1098/rspa.1922.0078 · Cited by 3,979
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Microfibrillated cellulose and new nanocomposite materials: a review
Siró, I., & Plackett, D. (2010) · Cellulose · doi:10.1007/s10570-010-9405-y · Cited by 2,883
Nature’s hierarchical materials
Fratzl, P., & Weinkamer, R. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.06.001 · Cited by 2,800
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Beck-Candanedo, S., Roman, M., & Gray, D. G. (2005) · Biomacromolecules · doi:10.1021/bm049300p · Cited by 1,588
Research works printed but not linked: 3
- Håkansson K., 2012, Trita-MEK
- Volker-Pop L. M., 2014, Chem. Listy, 108, 707
- 10.1002/(sici)1521-3935(19980401)199:4<471::aid-macp471>3.0.co;2-9 · doi:10.1002/(sici)1521-3935(19980401)199:4<471::aid-macp471>3.0.co;2-9
Cited by
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Self-Healing Injectable Hydrogels for Tissue Regeneration
Bertsch, P., Diba, M., Mooney, D. J., & Leeuwenburgh, S. C. G. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00179 · Cited by 892
Additive manufacturing of silica aerogels
Zhao, S., Siqueira, G., Drdova, S., Norris, D., Ubert, C., Bonnin, A., Galmarini, S., Ganobjak, M., Pan, Z., Brunner, S., et al. (2020) · Nature · doi:10.1038/s41586-020-2594-0 · Cited by 676
Self-citationSynthesis and alignment of liquid crystalline elastomers
Herbert, K. M., Fowler, H. E., McCracken, J. M., Schlafmann, K. R., Koch, J. A., & White, T. J. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00359-z · Cited by 600
Understanding Nanocellulose–Water Interactions: Turning a Detriment into an Asset
Solhi, L., Guccini, V., Heise, K., Solala, I., Niinivaara, E., Xu, W., Mihhels, K., Kröger, M., Meng, Z., Wohlert, J., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00611 · Cited by 506
From Shape to Function: The Next Step in Bioprinting
Levato, R., Jungst, T., Scheuring, R. G., Blunk, T., Groll, J., & Malda, J. (2020) · Advanced Materials · doi:10.1002/adma.201906423 · Cited by 476
Bioprinting: From Tissue and Organ Development to in Vitro Models
Mota, C., Camarero-Espinosa, S., Baker, M. B., Wieringa, P., & Moroni, L. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00789 · Cited by 345
De France, K., Zeng, Z., Wu, T., & Nyström, G. (2021) · Advanced Materials · doi:10.1002/adma.202000657 · Cited by 289
3D‐Printed Anisotropic Polymer Materials for Functional Applications
Chen, J., Liu, X., Tian, Y., Zhu, W., Yan, C., Shi, Y., Kong, L. B., Qi, H. J., & Zhou, K. (2022) · Advanced Materials · doi:10.1002/adma.202102877 · Cited by 281
Advances in 3D/4D printing of mechanical metamaterials: From manufacturing to applications
Zhou, X., Ren, L., Song, Z., Li, G., Zhang, J., Li, B., Wu, Q., Li, W., Ren, L., & Liu, Q. (2023) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2023.110585 · Cited by 277
Ye, D., Lei, X., Li, T., Cheng, Q., Chang, C., Hu, L., & Zhang, L. (2019) · ACS Nano · doi:10.1021/acsnano.9b02081 · Cited by 276
Tardy, B. L., Mattos, B. D., Otoni, C. G., Beaumont, M., Majoinen, J., Kämäräinen, T., & Rojas, O. J. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01333 · Cited by 267
Nanomaterial Patterning in 3D Printing
Elder, B., Neupane, R., Tokita, E., Ghosh, U., Hales, S., & Kong, Y. L. (2020) · Advanced Materials · doi:10.1002/adma.201907142 · Cited by 265
Frka-Petesic, B., Parton, T. G., Honorato-Rios, C., Narkevicius, A., Ballu, K., Shen, Q., Lu, Z., Ogawa, Y., Haataja, J. S., Droguet, B. E., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00836 · Cited by 236
Multi-functional liquid crystal elastomer composites
Wang, Y., Liu, J., & Yang, S. (2022) · Applied Physics Reviews · doi:10.1063/5.0075471 · Cited by 241
Ajdary, R., Tardy, B. L., Mattos, B. D., Bai, L., & Rojas, O. J. (2021) · Advanced Materials · doi:10.1002/adma.202001085 · Cited by 245
Ferreira, F. V., Otoni, C. G., De France, K. J., Barud, H. S., Lona, L. M. F., Cranston, E. D., & Rojas, O. J. (2020) · Materials Today · doi:10.1016/j.mattod.2020.03.003 · Cited by 222
Biopolymeric photonic structures: design, fabrication, and emerging applications
Xiong, R., Luan, J., Kang, S., Ye, C., Singamaneni, S., & Tsukruk, V. V. (2020) · Chemical Society Reviews · doi:10.1039/c8cs01007b · Cited by 226
Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles
Choi, S., Lee, K. Y., Kim, S. L., MacQueen, L. A., Chang, H., Zimmerman, J. F., Jin, Q., Peters, M. M., Ardoña, H. A. M., Liu, X., et al. (2023) · Nature Materials · doi:10.1038/s41563-023-01611-3 · Cited by 212
A Tumor‐on‐a‐Chip System with Bioprinted Blood and Lymphatic Vessel Pair
Cao, X., Ashfaq, R., Cheng, F., Maharjan, S., Li, J., Ying, G., Hassan, S., Xiao, H., Yue, K., & Zhang, Y. S. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807173 · Cited by 198
Current international research into cellulose as a functional nanomaterial for advanced applications
Eichhorn, S. J., Etale, A., Wang, J., Berglund, L. A., Li, Y., Cai, Y., Chen, C., Cranston, E. D., Johns, M. A., Fang, Z., et al. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-06903-8 · Cited by 171
Processing nanocellulose to bulk materials: a review
Wang, Q., Yao, Q., Liu, J., Sun, J., Zhu, Q., & Chen, H. (2019) · Cellulose · doi:10.1007/s10570-019-02642-3 · Cited by 171
“A linear relationship between the alignment degree and the inverse of the shear rate at low applied shear rates was found, which offers quantitative parameters to tune the alignment of nanocellulose during the extrusion printing process (Hausmann et al. 2018).”
BackgroundQiao, Y., Liu, Y., Chen, C., Xie, H., Yao, Y., He, S., Ping, W., Liu, B., & Hu, L. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201805899 · Cited by 178
3D Printing‐Enabled Nanoparticle Alignment: A Review of Mechanisms and Applications
Xu, W., Jambhulkar, S., Ravichandran, D., Zhu, Y., Kakarla, M., Nian, Q., Azeredo, B., Chen, X., Jin, K., Vernon, B., et al. (2021) · Small · doi:10.1002/smll.202100817 · Cited by 168
Cellulose nanocrystal based multifunctional nanohybrids
Lizundia, E., Puglia, D., Nguyen, T.-D., & Armentano, I. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100668 · Cited by 163
Markandan, K., & Lai, C. Q. (2023) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2023.110661 · Cited by 159
Rheology as a Tool for Fine-Tuning the Properties of Printable Bioinspired Gels
Bercea, M. (2023) · Molecules · doi:10.3390/molecules28062766 · Cited by 162
High internal phase Pickering emulsions stabilized by cellulose nanocrystals for 3D printing
Ma, T., Cui, R., Lu, S.-Y., Hu, X.-N., Xu, B., Song, Y., & Hu, X.-S. (2022) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2021.107418 · Cited by 141
Kádár, R., Spirk, S., & Nypelö, T. (2021) · ACS Nano · doi:10.1021/acsnano.0c09829 · Cited by 151
3D Printing of Hydrogels for Stretchable Ionotronic Devices
Ge, G., Wang, Q., Zhang, Y., Alshareef, H. N., & Dong, X. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202107437 · Cited by 154
Recent advances in 3D printing of nanocellulose: structure, preparation, and application prospects
Ee, L. Y., & Li, S. F. Y. (2020) · Nanoscale Advances · doi:10.1039/d0na00408a · Cited by 154
Jiang, B., Jiao, H., Guo, X., Chen, G., Guo, J., Wu, W., Jin, Y., Cao, G., & Liang, Z. (2023) · Advanced Science · doi:10.1002/advs.202206055 · Cited by 164
Ma, T., Lv, L., Ouyang, C., Hu, X., Liao, X., Song, Y., & Hu, X. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.117217 · Cited by 151
Controlled Arrangement of Nanocellulose in Polymeric Matrix: From Reinforcement to Functionality
Peng, N., Huang, D., Gong, C., Wang, Y., Zhou, J., & Chang, C. (2020) · ACS Nano · doi:10.1021/acsnano.0c08906 · Cited by 144
Polymer-based responsive structural color materials
Wang, H., Zhang, H., Chen, Z., Zhao, Y., Gu, Z., & Shang, L. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101091 · Cited by 141
Yang, J. H., An, X., Liu, L., Tang, S., Cao, H., Xu, Q., & Liu, H. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116881 · Cited by 138
3D/4D printing of cellulose nanocrystals-based biomaterials: Additives for sustainable applications
Khalid, M. Y., Arif, Z. U., Noroozi, R., Hossain, M., Ramakrishna, S., & Umer, R. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.126287 · Cited by 140
“The alignment of anisotropic NPs during the deposition of ink directly influences the mechanical properties and microstructure of extrusion-based architectures [364].”
Tunable Biomimetic Hydrogels from Silk Fibroin and Nanocellulose
Dorishetty, P., Balu, R., Athukoralalage, S. S., Greaves, T. L., Mata, J., de Campo, L., Saha, N., Zannettino, A. C. W., Dutta, N. K., & Choudhury, N. R. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b05317 · Cited by 132
Rheology in Product Development: An Insight into 3D Printing of Hydrogels and Aerogels
Barrulas, R. V., & Corvo, M. C. (2023) · Gels · doi:10.3390/gels9120986 · Cited by 158
“All inks exhibited gel-like behaviour with G ′ greater than G ′′ at low shear stress and transitioned into a liquid-like state ( G ′′ > G ′ ) at high shear stress due to CNC alignment [149].”
BackgroundThe use of cellulose in bio-derived formulations for 3D/4D printing: A review
Gauss, C., Pickering, K. L., & Muthe, L. P. (2021) · Composites Part C Open Access · doi:10.1016/j.jcomc.2021.100113 · Cited by 149
Calafel, I., Criado‐Gonzalez, M., Aguirresarobe, R., Fernández, M., & Mijangos, C. (2025) · Materials Advances · doi:10.1039/d5ma00019j · Cited by 140
Wang, X., Qi, J., Zhang, W., Pu, Y., Yang, R., Wang, P., Liu, S., Tan, X., & Chi, B. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.07.115 · Cited by 130
Sustainability in Wood Products: A New Perspective for Handling Natural Diversity
Schubert, M., Panzarasa, G., & Burgert, I. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00360 · Cited by 135
Aqueous Inks of Pristine Graphene for 3D Printed Microsupercapacitors with High Capacitance
Tagliaferri, S., Nagaraju, G., Panagiotopoulos, A., Och, M., Cheng, G., Iacoviello, F., & Mattevi, C. (2021) · ACS Nano · doi:10.1021/acsnano.1c06535 · Cited by 124
3D printing of biomass-derived composites: application and characterization approaches
Ji, A., Zhang, S., Bhagia, S., Yoo, C. G., & Ragauskas, A. J. (2020) · RSC Advances · doi:10.1039/d0ra03620j · Cited by 123
Nanocellulose: a promising green treasure from food wastes to available food materials
Ma, T., Hu, X., Lu, S., Liao, X., Song, Y., & Hu, X. (2020) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2020.1832440 · Cited by 116
“2018), 3D printed hydrogel (Hausmann et al. 2018) and drug pharmaceutical carriers (Sheikhi et al.”
BackgroundInfluentialBioprintable tough hydrogels for tissue engineering applications
Dorishetty, P., Dutta, N. K., & Choudhury, N. R. (2020) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2020.102163 · Cited by 117
3D printing of shape-morphing and antibacterial anisotropic nanocellulose hydrogels
Fourmann, O., Hausmann, M. K., Neels, A., Schubert, M., Nyström, G., Zimmermann, T., & Siqueira, G. D. F. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.117716 · Cited by 115
“In previous work on inks containing high nanocellulose contents (Hausmann et al., 2018; Siqueira et al., 2017) we”
BackgroundInfluentialSelf-citationChan, C. L. C., Lei, I. M., van de Kerkhof, G. T., Parker, R., Richards, K. D., Evans, R. C., Huang, Y. Y. S., & Vignolini, S. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202108566 · Cited by 112
A systematic printability study of direct ink writing towards high-resolution rapid manufacturing
Zheng, Q., Xie, B., Xu, Z., & Wu, H. (2023) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/acd090 · Cited by 118
“The particle alignment dynamics are created to analyze the influence of shear stress on particle alignment deposition during DIW printing [30].”
BackgroundZhu, J. Y., Agarwal, U. P., Ciesielski, P. N., Himmel, M. E., Gao, R., Deng, Y., Morits, M., & Österberg, M. (2021) · Biotechnology for Biofuels · doi:10.1186/s13068-021-01963-5 · Cited by 114
Cholesteric cellulose liquid crystal ink for three-dimensional structural coloration
Zhang, Z., Wang, C., Wang, Q., Zhao, Y., & Shang, L. (2022) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2204113119 · Cited by 104
“The interactions between the pigments and the feedstock could result in changes in the rheology behaviors, which might add a type of unpredictability to the printing process (18, 19).”
BackgroundComplex‐Shaped Cellulose Composites Made by Wet Densification of 3D Printed Scaffolds
Hausmann, M. K., Siqueira, G. D. F., Libanori, R., Kokkinis, D., Neels, A., Zimmermann, T., & Studart, A. R. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201904127 · Cited by 111
Self-citationYang, G., Sun, Y., qin, L., Li, M., Ou, K., Jiang, F. M., & Fu, Q. (2021) · Composites Science and Technology · doi:10.1016/j.compscitech.2021.109013 · Cited by 101
Schwab, A., Hélary, C., Richards, R. G., Alini, M., Eglin, D., & D'Este, M. (2020) · Materials Today Bio · doi:10.1016/j.mtbio.2020.100058 · Cited by 99
Rheology of cellulose nanocrystal and nanofibril suspensions
Xu, J., Wang, P., Yuan, B., & Zhang, H. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.121527 · Cited by 99
Bertsch, P., Schneider, L., Bovone, G., Tibbitt, M. W., Fischer, P., & Gstöhl, S. J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b15896 · Cited by 98
Programmable Multi‐Responsive Nanocellulose‐Based Hydrogels With Embodied Logic
Arsuffi, B., Siqueira, G. D. F., Nyström, G., Titotto, S., Magrini, T., & Daraio, C. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202409864 · Cited by 99
Self-citationJanarthanan, G., Tran, H. N., Cha, E., Lee, C., Das, D., & Noh, I. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111008 · Cited by 99
3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure
Sather, N. A., Sai, H., Sasselli, I. R., Sato, K., Ji, W., Synatschke, C. V., Zambrotta, R. T., Edelbrock, J. F., Kohlmeyer, R. R., Hardin, J. O., et al. (2021) · Small · doi:10.1002/smll.202005743 · Cited by 97
Vertical Alignment of Anisotropic Fillers Assisted by Expansion Flow in Polymer Composites
Niu, H., Guo, H., Kang, L., Ren, L., Lv, R., & Bai, S. (2022) · Nano-Micro Letters · doi:10.1007/s40820-022-00909-2 · Cited by 95
“Shear stress-assisted alignment is a common strategy for alignment regulation of anisotropic particles in material processing, such as the doctor blade [9], three-dimensional (3D) printing [10, 11], or wet spinning methods [12].”
Micro additive manufacturing of glucose biosensors: A feasibility study
Nesaei, S., Song, Y., Wang, Y., Ruan, X., Du, D., Gozen, B. A., & Lin, Y. (2018) · Analytica Chimica Acta · doi:10.1016/j.aca.2018.09.012 · Cited by 93
Pal, S., Su, Y.-Z., Chen, Y., Yu, C., Kung, C., & Yu, S. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c02690 · Cited by 91
Printed Nanocomposite Energy Harvesters with Controlled Alignment of Barium Titanate Nanowires
Malakooti, M. H., Julé, F., & Sodano, H. A. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b13643 · Cited by 95
Additive Manufacturing of Thermoelectrics: Emerging Trends and Outlook
Zhang, D., Lim, W. Y., Duran, S. S. F., Loh, X. J., & Suwardi, A. (2022) · ACS Energy Letters · doi:10.1021/acsenergylett.1c02553 · Cited by 88
Li, M., Wu, Q., Han, J., Mei, C., Lei, T., Lee, S., & Gwon, J. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c02774 · Cited by 85
Recent Strategies for Strengthening and Stiffening Tough Hydrogels
Ji, D., & Kim, J. (2021) · Advanced NanoBiomed Research · doi:10.1002/anbr.202100026 · Cited by 86
3D Bioprinting of Lignocellulosic Biomaterials
Shavandi, A., Hosseini, S., Okoro, O. V., Nie, L., Babadi, F. E., & Melchels, F. P. W. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.202001472 · Cited by 89
Huang, H., Wang, X., Yu, J., Chen, Y., Ji, H. M., Zhang, Y., Rehfeldt, F., Wang, Y., & Zhang, K. (2019) · ACS Nano · doi:10.1021/acsnano.9b00551 · Cited by 84
Li, V. C.-F., Kuang, X., Hamel, C. M., Roach, D. J., Deng, Y., & Qi, H. J. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.04.013 · Cited by 76
Mechanical Properties Tailoring of 3D Printed Photoresponsive Nanocellulose Composites
Müller, L., Zimmermann, T., Nyström, G., Burgert, I., & Siqueira, G. D. F. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202002914 · Cited by 73
Self-citationStimuli induced cellulose nanomaterials alignment and its emerging applications: A review
Zhu, Q., Yao, Q., Sun, J., Chen, H., Xu, W., Liu, J., & Wang, Q. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115609 · Cited by 73
3D printable carboxylated cellulose nanocrystal-reinforced hydrogel inks for tissue engineering
Kumar, A., Matari, I. A. I., & Han, S. S. (2020) · Biofabrication · doi:10.1088/1758-5090/ab736e · Cited by 73
Thixotropy of cellulose nanocrystal suspensions
Fazilati, M., Ingelsten, S., Wojno, S., Nypelö, T., & Kádár, R. (2021) · Journal of Rheology · doi:10.1122/8.0000281 · Cited by 71
“%) corresponding to the liquid crystalline and glassy state [36].”
BackgroundMethodResultInfluentialFrost, B. A., Sutliff, B. P., Thayer, P., Bortner, M. J., & Foster, E. J. (2019) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00280 · Cited by 70
“It should be noted that previous studies have shown CNC and material alignment through polarized Raman spectroscopy, when shear force is applied through either rheology, extrusion, or 3D printing (Mendez et al., 2011; Reising et al., 2012; Hausmann et al., 2018; Fallon et al., 2019).”
BackgroundZhang, Y., Li, J., Mouser, V. H. M., Roumans, N. J. T., Moroni, L., & Habibović, P. (2021) · ACS Nano · doi:10.1021/acsnano.1c03905 · Cited by 70
Wu, M., Zhang, C., Pi, J.-K., Liu, C., Yang, J., & Xu, Z. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta00420c · Cited by 66
Vorobiov, V. K., Sokolova, M. P., Bobrova, N. V., Elokhovsky, V. Y., & Smirnov, M. A. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119475 · Cited by 65
Ferreira, F. V., Souza, A. G., Ajdary, R., de Souza, L. P., Lopes, J. H., Correa, D. S., Siqueira, G. D. F., Barud, H. D. S., Rosa, D. D. S., Mattoso, L. H. C., et al. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.06.020 · Cited by 86
“[98] showed that 3D printing nozzles combined with shear and extensional flow could be used as effective means to tune the orientation of CNC, therefore, affecting the manufactured material’s microstructure and properties.”
BackgroundMethodInfluentialSelf-citationLow Environmental Impact Magnetic Chitosan and Chitin Cryogels for PFAS Remediation
García‐Castrillo, M., Barandika, G., & Lizundia, E. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202405298 · Cited by 69
Wang, Q., Zhou, R., Sun, J., Liu, J., & Zhu, Q. (2022) · ACS Nano · doi:10.1021/acsnano.2c04883 · Cited by 64
Field-assisted additive manufacturing of polymeric composites
Safaee, S., Schock, M., Joyee, E. B., Pan, Y., & Chen, R. K. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102642 · Cited by 77
Müller, L., Zingg, A., Arcifa, A., Zimmermann, T., Nyström, G., Burgert, I., & Siqueira, G. D. F. (2022) · ACS Nano · doi:10.1021/acsnano.2c05628 · Cited by 63
“This leads to a high degree of CNC alignment 8 and provides high spatial control over the mechanical properties of the printed parts.”
Self-citationCytomembrane-Inspired MXene Ink with Amphiphilic Surfactant for 3D Printed Microsupercapacitors
Shi, G., Zhu, Y., Batmunkh, M., Ingram, M., Huang, Y., Chen, Z., Wei, Y., Zhong, L., Peng, X., & Zhong, Y. L. (2022) · ACS Nano · doi:10.1021/acsnano.2c05445 · Cited by 60
Lu, Y., Rai, R., & Nitin, N. (2023) · Food Research International · doi:10.1016/j.foodres.2023.113384 · Cited by 64
3D Printed Disposable Wireless Ion Sensors with Biocompatible Cellulose Composites
Kim, T., Bao, C., Hausmann, M. K., Siqueira, G. D. F., Zimmermann, T., & Kim, W. S. (2018) · Advanced Electronic Materials · doi:10.1002/aelm.201800778 · Cited by 60
Self-citationSiddiqui, S., Rabbi, M., Ahmed, R. U., & Billah, M. M. (2024) · Cleaner Materials · doi:10.1016/j.clema.2024.100275 · Cited by 49
Kam, D., Chasnitsky, M., Nowogrodski, C., Braslavsky, I., Abitbol, T., Magdassi, S., & Shoseyov, O. (2019) · Colloids and Interfaces · doi:10.3390/colloids3020046 · Cited by 58
“recently published a paper that evaluated particle alignment in a high concentration CNC suspension by studying the rheology and flow in a needle [76].”
BackgroundKumar, A., Matari, I. A. I., Choi, H., Kim, A., Suk, Y. J., Kim, J. Y., & Han, S. S. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.109983 · Cited by 58
3D printing high interfacial bonding polyether ether ketone components via pyrolysis reactions
Li, Q., Zhao, W. G., Niu, B., Wang, Y., Wu, X., Ji, J., Li, Y., Zhao, T., Li, H., & Wang, G. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.109333 · Cited by 59
3D printing of graphene oxide composites with well controlled alignment
Qian, Y., Li, C., Qi, Y., & Zhong, J. (2020) · Carbon · doi:10.1016/j.carbon.2020.08.077 · Cited by 57
Izod impact resistance of 3D printed discontinuous fibrous composites with Bouligand structure
Guan, L., Peng, W., Wen, R. N. J., Fan, J., & Ferrand, H. L. (2023) · NPG Asia Materials · doi:10.1038/s41427-023-00508-6 · Cited by 55
Maity, K., Mondal, A., & Saha, M. C. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c21680 · Cited by 81
Kuhnt, T., & Camarero‐Espinosa, S. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.117159 · Cited by 59
Lai, P., & Yu, S. (2021) · Polymers · doi:10.3390/polym13050688 · Cited by 53
“For example, the shear stress during the extrusion process can further align the CNCs along the printing direction to achieve anisotropic mechanical reinforcement and optical properties [34,35].”
BackgroundContinuous spinning aligned liquid crystal elastomer fibers with a 3D printer setup
Lin, X., Saed, M. O., & Terentjev, E. M. (2021) · Soft Matter · doi:10.1039/d1sm00432h · Cited by 52
Cellulose hydrogel skeleton by extrusion 3D printing of solution
Hu, X., Yang, Z., Kang, S., Jiang, M., Zhou, Z., Gou, J., Hui, D., & He, J. (2020) · Nanotechnology Reviews · doi:10.1515/ntrev-2020-0025 · Cited by 50
Structural Colors by Synergistic Birefringence and Surface Plasmon Resonance
Wang, X., Xu, D., Jaquet, B., Yang, Y., Wang, J., Huang, H., Chen, Y., Gerhard, C., & Zhang, K. (2020) · ACS Nano · doi:10.1021/acsnano.0c05599 · Cited by 50
Feng, C., & Yu, S. (2021) · Polymers · doi:10.3390/polym13213614 · Cited by 47
“The gel-like behavior of the inks at low shear stress was found in several works by studying the suspension of CNCs [29,30,34].”
BackgroundMethod
Metadata
- Authors
- Hausmann, M. K., Rühs, P. A., Siqueira, G., Läuger, J., Libanori, R., Zimmermann, T., & Studart, A. R.
- Affiliations
- ETH Zurich (CH)
- Anton Paar Germany GmbH, Helmuth-Hirth-Strasse 6, D-73760 Ostfildern, Germany
- Empa (CH)
- Corresponding author
- Rühs, Patrick A.
- Siqueira, Gilberto
- Studart, André R.
- ORCID
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-07-05
- Volume
- 12
- Issue
- 7
- Pages
- 6926-6937
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2861423554
- Cited by
- 282
- References
- 83
- Citations by year
- 2026: 21 · 2025: 28 · 2024: 31 · 2023: 45 · 2022: 50 · 2021: 40 · 2020: 39 · 2019: 23 · 2018: 5
- FWCI
- 21.41
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ACS Nano (publishedVersion)
- PubMed (publishedVersion)
- DORA Empa (Swiss Federal Laboratories for Materials Science and Technology (Empa)) (submittedVersion)
- Funders
- Schweizerischer Nationalfonds zur F?rderung der Wissenschaftlichen Forschung (200021_159906/1, BSCGI0_157696)
- Innosuisse
- Topics
- Physical Sciences › Engineering › Building and Construction › Innovations in Concrete and Construction Materials
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Keywords
- cellulose nanocrystals, particle alignment, direct ink writing, concentrated suspensions, shear stress, steric interactions, hydrodynamic interactions, extensional flow, core-shell structure, anisotropic particles, material extrusion, composite materials, nozzle geometry
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.