Dynamics of Cellulose Nanocrystal Alignment during 3D Printing
The DOI matches its Crossref record; 85 of the 85 references it cites were found in a registry or an index.
Abstract
The alignment of anisotropic particles during ink deposition directly affects the microstructure and properties of materials manufactured by extrusion-based 3D printing. Although particle alignment in diluted suspensions is well described by analytical and numerical models, the dynamics of particle orientation in the highly concentrated inks typically used for printing via direct ink writing (DIW) remains poorly understood. Using cellulose nanocrystals (CNCs) as model building blocks of increasing technological relevance, we study the dynamics of particle alignment under the shear stresses applied to concentrated inks during DIW. With the help of in situ polarization rheology, we find that the time period needed for particle alignment scales inversely with the applied shear rate and directly with the particle concentration. Such dependences can be quantitatively described by a simple scaling relation and qualitatively interpreted in terms of steric and hydrodynamic interactions between particles at high shear rates and particle concentrations. Our understanding of the alignment dynamics is then utilized to estimate the effect of shear stresses on the orientation of particles during the printing process. Finally, proof-of-concept experiments show that the combination of shear and extensional flow in 3D printing nozzles of different geometries provides an effective means to tune the orientation of CNCs from fully aligned to core-shell architectures. These findings offer powerfu…
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“To achieve this, we exploited the shear thinning property of FIG inks (Supplementary Fig. 2h–i), which is not only essential for printing, but also for inducing fiber alignment along the direction of printing40.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [40]
Citations
Cites
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980
The motion of ellipsoidal particles immersed in a viscous fluid
Jeffery, G. B. (1922) · Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character · doi:10.1098/rspa.1922.0078 · Cited by 3,979
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Microfibrillated cellulose and new nanocomposite materials: a review
Siró, I., & Plackett, D. (2010) · Cellulose · doi:10.1007/s10570-010-9405-y · Cited by 2,883
Nature’s hierarchical materials
Fratzl, P., & Weinkamer, R. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.06.001 · Cited by 2,800
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Beck-Candanedo, S., Roman, M., & Gray, D. G. (2005) · Biomacromolecules · doi:10.1021/bm049300p · Cited by 1,588
Key advances in the chemical modification of nanocelluloses
Habibi, Y. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60204d · Cited by 1,561
Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Siqueira, G., Bras, J., & Dufresne, A. (2010) · Polymers · doi:10.3390/polym2040728 · Cited by 1,328
Self-citationPolymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Mewis, J., & Wagner, N. J. (2011) · Cambridge University Press eBooks · doi:10.1017/cbo9780511977978 · Cited by 1,142
The yield stress—a review or ‘παντα ρει’—everything flows?
Barnes, H. A. (1999) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/s0377-0257(98)00094-9 · Cited by 1,072
3D printing of smart materials: A review on recent progresses in 4D printing
Khoo, Z. X., Teoh, J. E. M., Liu, Y., Chua, C. K., Yang, S., An, J., Leong, K. F., & Yeong, W. Y. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097054 · Cited by 912
The rheology of suspensions of solid particles
Mueller, S., Llewellin, E. W., & Mader, H. M. (2010) · Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.2009.0445 · Cited by 898
Multimaterial magnetically assisted 3D printing of composite materials
Kokkinis, D., Schaffner, M., & Studart, A. R. (2015) · Nature Communications · doi:10.1038/ncomms9643 · Cited by 848
Self-citationSteric stabilization of a cellulose microcrystal suspension by poly(ethylene glycol) grafting
Araki, J., Wada, M., & Kuga, S. (2001) · Langmuir · doi:10.1021/la001070m · Cited by 720
Cellulose fibrils for polymer reinforcement
Zimmermann, T., Pöhler, E., & Geiger, T. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200400097 · Cited by 598
Self-citationCellulose Nanocrystal Inks for 3D Printing of Textured Cellular Architectures
Siqueira, G., Kokkinis, D., Libanori, R., Hausmann, M. K., Gladman, A. S., Neels, A., Tingaut, P., Zimmermann, T., Lewis, J. A., & Studart, A. R. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604619 · Cited by 580
Self-citationHydrodynamic alignment and assembly of nanofibrils resulting in strong cellulose filaments
Håkansson, K. M. O., Fall, A. B., Lundell, F., Yu, S., Krywka, C., Roth, S. V., Santoro, G., Kvick, M., Prahl Wittberg, L., Wågberg, L., et al. (2014) · Nature Communications · doi:10.1038/ncomms5018 · Cited by 523
Benchmarking Cellulose Nanocrystals: From the Laboratory to Industrial Production
Reid, M. S., Villalobos, M., & Cranston, E. D. (2017) · Langmuir · doi:10.1021/acs.langmuir.6b03765 · Cited by 518
Application of ree-eyring generalized flow theory to suspensions of spherical particles
MARON, S., & PIERCE, P. (1956) · Journal of Colloid Science · doi:10.1016/0021-9797(56)90012-1 · Cited by 515
Designing bioinspired composite reinforcement architectures via 3D magnetic printing
Martin, J. J., Fiore, B. E., & Erb, R. M. (2015) · Nature Communications · doi:10.1038/ncomms9641 · Cited by 515
The rheological properties of suspensions of rigid particles
Jeffrey, D. J., & Acrivos, A. (1976) · AIChE Journal · doi:10.1002/aic.690220303 · Cited by 510
Nanocellulose: From Nature to High Performance Tailored Materials
Dufresne, A. (2012) · Cited by 498
Dunlop, J. W. C., & Fratzl, P. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104421 · Cited by 434
3D printing of bacteria into functional complex materials
Schaffner, M., Rühs, P. A., Coulter, F., Kilcher, S., & Studart, A. R. (2017) · Science Advances · doi:10.1126/sciadv.aao6804 · Cited by 425
Self-citationNanocellulose: From Nature to High Performance Tailored Materials
Dufresne, A. (2012) · De Gruyter eBooks · doi:10.1515/9783110254600 · Cited by 420
Introduction to the Principles of Ceramic Processing
Reed, J. S. (1988) · Medical Entomology and Zoology · Cited by 417
Additive manufacturing of biologically-inspired materials
Studart, A. R. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00836k · Cited by 415
Self-citationKitano, T., Kataoka, T., & Shirota, T. (1981) · Rheologica Acta · doi:10.1007/bf01513064 · Cited by 404
Aqueous Colloidal Solutions of Cellulose Micelles.
Rånby, B. G., Banderet, A., & Sillén, L. G. (1949) · Acta Chemica Scandinavica · doi:10.3891/acta.chem.scand.03-0649 · Cited by 401
Rheology and Phase Behavior of Lyotropic Cellulose Nanocrystal Suspensions
Ureña-Benavides, E. E., Ao, G., Davis, V. A., & Kitchens, C. L. (2011) · Macromolecules · doi:10.1021/ma201649f · Cited by 383
Rheology of Nanocrystalline Cellulose Aqueous Suspensions
Shafiei-Sabet, S., Hamad, W. Y., & Hatzikiriakos, S. G. (2012) · Langmuir · doi:10.1021/la303380v · Cited by 361
3D-Printable Bioactivated Nanocellulose–Alginate Hydrogels
Leppiniemi, J., Lahtinen, P., Paajanen, A., Mahlberg, R., Metsä-Kortelainen, S., Pinomaa, T., Pajari, H., Vikholm-Lundin, I., Pursula, P., & Hytönen, V. P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b02756 · Cited by 347
Alignment of Carbon Nanotubes under Low Magnetic Fields through Attachment of Magnetic Nanoparticles
Correa-Duarte, M. A., Grzelczak, M., Salgueiriño-Maceira, V., Giersig, M., Liz-Marzán, L. M., Farle, M., Sierazdki, K., & Diaz, R. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp0544890 · Cited by 339
Orts, W. J., Godbout, L., Marchessault, R. H., & Revol, J.-F. (1998) · Macromolecules · doi:10.1021/ma9711452 · Cited by 308
Rheology of nanocellulose-rich aqueous suspensions: A Review
Hubbe, M. A., Tayeb, P., Joyce, M., Tyagi, P., Kehoe, M., Dimic-Misic, K., & Pal, L. (2017) · BioResources · doi:10.15376/biores.12.4.hubbe · Cited by 289
Simple Method for the Melt Extrusion of a Cellulose Nanocrystal Reinforced Hydrophobic Polymer
Ben Azouz, K., Ramires, E. C., Van den Fonteyne, W., El Kissi, N., & Dufresne, A. (2012) · ACS Macro Letters · doi:10.1021/mz2001737 · Cited by 279
Hirai, A., Inui, O., Horii, F., & Tsuji, M. (2009) · Langmuir · doi:10.1021/la802947m · Cited by 264
A critical review of the current knowledge regarding the biological impact of nanocellulose
Endes, C., Camarero-Espinosa, S., Mueller, S., Foster, E. J., Petri-Fink, A., Rothen-Rutishauser, B., Weder, C., & Clift, M. J. D. (2016) · Journal of Nanobiotechnology · doi:10.1186/s12951-016-0230-9 · Cited by 238
Structure and rheology of nanocrystalline cellulose
Liu, D., Chen, X., Yue, Y., Chen, M., & Wu, Q. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.11.039 · Cited by 221
Hierarchical Self-Assembly of Cellulose Nanocrystals in a Confined Geometry
Parker, R. M., Frka-Petesic, B., Guidetti, G., Kamita, G., Consani, G., Abell, C., & Vignolini, S. (2016) · ACS Nano · doi:10.1021/acsnano.6b03355 · Cited by 218
The yield stress of concentrated flocculated suspensions of size distributed particles
Zhou, Z., Solomon, M. J., Scales, P. J., & Boger, D. V. (1999) · Journal of Rheology · doi:10.1122/1.551029 · Cited by 216
3D Printing Bioinspired Ceramic Composites
Feilden, E., Ferraro, C., Zhang, Q., García-Tuñón, E., D’Elia, E., Giuliani, F., Vandeperre, L., & Saiz, E. (2017) · Scientific Reports · doi:10.1038/s41598-017-14236-9 · Cited by 208
Schütz, C., Agthe, M., Fall, A. B., Gordeyeva, K., Guccini, V., Salajková, M., Plivelic, T. S., Lagerwall, J. P. F., Salazar-Alvarez, G., & Bergström, L. (2015) · Langmuir · doi:10.1021/acs.langmuir.5b00924 · Cited by 207
Shear Dynamics of Aqueous Suspensions of Cellulose Whiskers
Bercea, M., & Navard, P. (2000) · Macromolecules · doi:10.1021/ma000417p · Cited by 204
Shear yield stress of partially flocculated colloidal suspensions
Scales, P. J., Johnson, S. B., Healy, T. W., & Kapur, P. C. (1998) · AIChE Journal · doi:10.1002/aic.690440305 · Cited by 203
Anisotropic particles align perpendicular to the flow direction in narrow microchannels
Trebbin, M., Steinhauser, D., Perlich, J., Buffet, A., Roth, S. V., Zimmermann, W., Thiele, J., & Förster, S. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1219340110 · Cited by 181
Three-dimensional printing of freeform helical microstructures: a review
Farahani, R. D., Chizari, K., & Therriault, D. (2014) · Nanoscale · doi:10.1039/c4nr02041c · Cited by 160
Structure and rheological properties of cellulose nanocrystals suspension
Qiao, C., Chen, G., Zhang, J., & Yao, J. (2015) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2015.11.005 · Cited by 158
Saarikoski, E., Saarinen, T., Salmela, J., & Seppälä, J. V. (2012) · Cellulose · doi:10.1007/s10570-012-9661-0 · Cited by 148
Calculation of interparticle spacing in colloidal systems
Tian, H., & Riman, R. E. (2006) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2004.10.014 · Cited by 128
Molecular orientation and rheology in sheared lyotropic liquid crystalline polymers
Burghardt, W. R. (1998) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1998.021990401 · Cited by 126
Influence of Particle Volume Fraction on Packing in Responsive Hydrogel Colloidal Crystals
Debord, S. B., & Lyon, L. A. (2003) · The Journal of Physical Chemistry B · doi:10.1021/jp026783n · Cited by 123
Kundler, I., & Finkelmann, H. (1998) · Macromolecular Chemistry and Physics · doi:10.1002/(sici)1521-3935(19980401)199:4<583::aid-macp583>3.0.co;2-u · Cited by 112
Development of orientation and texture during shearing of liquid-crystalline polymers
Larson, R. G., & Mead, D. W. (1992) · Liquid Crystals · doi:10.1080/02678299208029120 · Cited by 111
Chiral nematic ordering of polysaccharides
Gray, D. G. (1994) · Carbohydrate Polymers · doi:10.1016/0144-8617(94)90053-1 · Cited by 106
Structure–color mechanism of iridescent cellulose nanocrystal films
Liu, D., Wang, S., Ma, Z., Tian, D., Gu, M., & Lin, F. (2014) · RSC Advances · doi:10.1039/c4ra06268j · Cited by 104
Relation between molecular orientation and rheology in lyotropic hydroxypropylcellulose solutions
Hongladarom, K., Secakusuma, V., & Burghardt, W. R. (1994) · Journal of Rheology · doi:10.1122/1.550556 · Cited by 92
Exploring the benefits of β-allyl sulfones for more homogeneous dimethacrylate photopolymer networks
Gorsche, C., Koch, T., Moszner, N., & Liska, R. (2015) · Polymer Chemistry · doi:10.1039/c4py01582g · Cited by 90
Yanez, J. A., Shikata, T., Lange, F. F., & Pearson, D. S. (1996) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1996.tb08726.x · Cited by 89
Flow Behavior of Liquid Crystalline Polymers
Marrucci, G., & Greco, F. (1993) · Advances in chemical physics · doi:10.1002/9780470141458.ch3 · Cited by 81
Wide-Angle X-ray Diffraction of Cellulose Nanocrystal−Alginate Nanocomposite Fibers
Ureña-Benavides, E. E., & Kitchens, C. L. (2011) · Macromolecules · doi:10.1021/ma102731m · Cited by 77
Ansari, F., Sjöstedt, A., Larsson, P. T., Berglund, L. A., & Wågberg, L. (2015) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.03.024 · Cited by 76
Flow Behavior of Colloidal Rodlike Viruses in the Nematic Phase
Lettinga, M. P., Dogic, Z., Wang, H., & Vermant, J. (2005) · Langmuir · doi:10.1021/la050116e · Cited by 74
Understanding and overcoming shear alignment of fibers during extrusion
Martin, J. J., Riederer, M. S., Krebs, M. D., & Erb, R. M. (2014) · Soft Matter · doi:10.1039/c4sm02108h · Cited by 64
Saarinen, T., Haavisto, S., Sorvari, A., Salmela, J., & Seppälä, J. V. (2014) · Cellulose · doi:10.1007/s10570-014-0187-5 · Cited by 63
Image analysis of shear-induced textures in liquid-crystalline polymers
Gleeson, J. T., Larson, R. G., Mead, D. W., Kiss, G. D., & Cladis, P. E. (1992) · Liquid Crystals · doi:10.1080/02678299208028994 · Cited by 62
Mykhaylyk, O. O., Warren, N. J., Parnell, A. J., Pfeifer, G., & Läuger, J. (2016) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.24111 · Cited by 55
Self-citationAdjustment of the Chiral Nematic Phase Properties of Cellulose Nanocrystals by Polymer Grafting
Azzam, F., Heux, L., & Jean, B. (2016) · Langmuir · doi:10.1021/acs.langmuir.6b00690 · Cited by 54
Liquid crystalline cellulose-based nematogels
Liu, Q., & Smalyukh, I. I. (2017) · Science Advances · doi:10.1126/sciadv.1700981 · Cited by 49
Alignment of particles in sheared viscoelastic fluids
de Oliveira, I. S. S., van den Noort, A., Padding, J. T., den Otter, W. K., & Briels, W. J. (2011) · The Journal of Chemical Physics · doi:10.1063/1.3633701 · Cited by 46
III. Laminar‐flow properties of flocculated suspensions
(1961) · AIChE Journal · doi:10.1002/aic.690070317 · Cited by 46
Kinetics of fiber solidification
Mercader, C., Lucas, A., Derré, A., Zakri, C., Moisan, S., Maugey, M., & Poulin, P. (2010) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1003302107 · Cited by 42
On the flow of non-Newtonian polymer solutions
Savvas, T., Markatos, N. C., & Papaspyrides, C. D. (1994) · Applied Mathematical Modelling · doi:10.1016/0307-904x(94)90178-3 · Cited by 41
Combined SAXS−Rheological Studies of Liquid-Crystalline Colloidal Dispersions of Mineral Particles
Camerel, F., Gabriel, J. P., Batail, P., Panine, P., & Davidson, P. (2003) · Langmuir · doi:10.1021/la034626p · Cited by 36
Scaling relationships for acoustic control of two-phase microstructures during direct-write printing
Collino, R. R., Ray, T. R., Friedrich, L. M., Cornell, J. D., Meinhart, C. D., & Begley, M. R. (2018) · Materials Research Letters · doi:10.1080/21663831.2018.1431317 · Cited by 33
Shear orientation of a lamellar lyotropic liquid crystal
Läuger, J., Linemann, R., & Richtering, W. H. (1995) · Rheologica Acta · doi:10.1007/bf00398432 · Cited by 29
Self-citationNesaei, S., Rock, M., Wang, Y., Kessler, M. R., & Gozen, B. A. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4037238 · Cited by 25
Yielding of weakly attractive nanoparticle networks
Studart, A. R., Amstad, E., & Gauckler, L. J. (2011) · Soft Matter · doi:10.1039/c1sm05598d · Cited by 21
Self-citationRheology of Highly Concentrated Fiber Suspensions
Orgéas, L., Dumont, P., & Corre, S. L. (2015) · Elsevier eBooks · doi:10.1016/b978-1-78548-036-2.50005-8 · Cited by 16
Self-Assembly of Cellulose Nanocrystals: Parabolic Focal Conic Films
Gray, D. G., & Roman, M. (2006) · ACS symposium series · doi:10.1021/bk-2006-0938.ch003 · Cited by 6
Research works printed but not linked: 3
- Håkansson K., 2012, Trita-MEK
- Volker-Pop L. M., 2014, Chem. Listy, 108, 707
- 10.1002/(sici)1521-3935(19980401)199:4<471::aid-macp471>3.0.co;2-9 · doi:10.1002/(sici)1521-3935(19980401)199:4<471::aid-macp471>3.0.co;2-9
Cited by
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Self-Healing Injectable Hydrogels for Tissue Regeneration
Bertsch, P., Diba, M., Mooney, D. J., & Leeuwenburgh, S. C. G. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00179 · Cited by 892
Additive manufacturing of silica aerogels
Zhao, S., Siqueira, G., Drdova, S., Norris, D., Ubert, C., Bonnin, A., Galmarini, S., Ganobjak, M., Pan, Z., Brunner, S., et al. (2020) · Nature · doi:10.1038/s41586-020-2594-0 · Cited by 676
Self-citationSynthesis and alignment of liquid crystalline elastomers
Herbert, K. M., Fowler, H. E., McCracken, J. M., Schlafmann, K. R., Koch, J. A., & White, T. J. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00359-z · Cited by 600
Metadata
- Authors
- Hausmann, M. K., Rühs, P. A., Siqueira, G., Läuger, J., Libanori, R., Zimmermann, T., & Studart, A. R.
- Affiliations
- ETH Zurich (CH)
- Anton Paar Germany GmbH, Helmuth-Hirth-Strasse 6, D-73760 Ostfildern, Germany
- Empa (CH)
- Corresponding author
- Rühs, Patrick A.
- Siqueira, Gilberto
- Studart, André R.
- ORCID
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-07-05
- Volume
- 12
- Issue
- 7
- Pages
- 6926-6937
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2861423554
- Cited by
- 282
- References
- 83
- Citations by year
- 2026: 21 · 2025: 28 · 2024: 31 · 2023: 45 · 2022: 50 · 2021: 40 · 2020: 39 · 2019: 23 · 2018: 5
- FWCI
- 21.41
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ACS Nano (publishedVersion)
- PubMed (publishedVersion)
- DORA Empa (Swiss Federal Laboratories for Materials Science and Technology (Empa)) (submittedVersion)
- Funders
- Schweizerischer Nationalfonds zur F?rderung der Wissenschaftlichen Forschung (200021_159906/1, BSCGI0_157696)
- Innosuisse
- Topics
- Physical Sciences › Engineering › Building and Construction › Innovations in Concrete and Construction Materials
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Keywords
- cellulose nanocrystals, particle alignment, direct ink writing, concentrated suspensions, shear stress, steric interactions, hydrodynamic interactions, extensional flow, core-shell structure, anisotropic particles, material extrusion, composite materials, nozzle geometry
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.