Dynamics of Cellulose Nanocrystal Alignment during 3D Printing
The DOI matches its Crossref record; 85 of the 85 references it cites were found in a registry or an index.
Abstract
The alignment of anisotropic particles during ink deposition directly affects the microstructure and properties of materials manufactured by extrusion-based 3D printing. Although particle alignment in diluted suspensions is well described by analytical and numerical models, the dynamics of particle orientation in the highly concentrated inks typically used for printing via direct ink writing (DIW) remains poorly understood. Using cellulose nanocrystals (CNCs) as model building blocks of increasing technological relevance, we study the dynamics of particle alignment under the shear stresses applied to concentrated inks during DIW. With the help of in situ polarization rheology, we find that the time period needed for particle alignment scales inversely with the applied shear rate and directly with the particle concentration. Such dependences can be quantitatively described by a simple scaling relation and qualitatively interpreted in terms of steric and hydrodynamic interactions between particles at high shear rates and particle concentrations. Our understanding of the alignment dynamics is then utilized to estimate the effect of shear stresses on the orientation of particles during the printing process. Finally, proof-of-concept experiments show that the combination of shear and extensional flow in 3D printing nozzles of different geometries provides an effective means to tune the orientation of CNCs from fully aligned to core-shell architectures. These findings offer powerfu…
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“To achieve this, we exploited the shear thinning property of FIG inks (Supplementary Fig. 2h–i), which is not only essential for printing, but also for inducing fiber alignment along the direction of printing40.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [40]
Citations
Cites
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980
The motion of ellipsoidal particles immersed in a viscous fluid
Jeffery, G. B. (1922) · Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character · doi:10.1098/rspa.1922.0078 · Cited by 3,979
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Microfibrillated cellulose and new nanocomposite materials: a review
Siró, I., & Plackett, D. (2010) · Cellulose · doi:10.1007/s10570-010-9405-y · Cited by 2,883
Nature’s hierarchical materials
Fratzl, P., & Weinkamer, R. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.06.001 · Cited by 2,800
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Beck-Candanedo, S., Roman, M., & Gray, D. G. (2005) · Biomacromolecules · doi:10.1021/bm049300p · Cited by 1,588
Research works printed but not linked: 3
- Håkansson K., 2012, Trita-MEK
- Volker-Pop L. M., 2014, Chem. Listy, 108, 707
- 10.1002/(sici)1521-3935(19980401)199:4<471::aid-macp471>3.0.co;2-9 · doi:10.1002/(sici)1521-3935(19980401)199:4<471::aid-macp471>3.0.co;2-9
Cited by
Items 201–291 of 291
Mandin, S., Metilli, L., Karrouch, M., Blésès, D., Lancelon‐Pin, C., Sailler, P., Chèvremont, W., Nicolas, P. E., Putaux, J., Hengl, N., et al. (2024) · Nanoscale · doi:10.1039/d4nr02840f · Cited by 12
3D Printed Biodegradable Soft Actuators from Nanocellulose Reinforced Gelatin Composites
Müller, O., Poulin, A., Aeby, X., Emma, R., Kanno, R., Nagai, T., Shintake, J., & Nyström, G. (2024) · Advanced Sustainable Systems · doi:10.1002/adsu.202400450 · Cited by 13
From Random to Oriented: Shear‐Induced Alignment of Fillers in Polymer Matrices
Fernández‐Gil, F., & Hernández, J. L. (2025) · Polymer Composites · doi:10.1002/pc.70627 · Cited by 12
Fingerprinting soft material nanostructure response to complex flow histories
Corona, P. T., Berke, B., Guizar‐Sicairos, M., Leal, L. G., Liebi, M., & Helgeson, M. E. (2022) · Physical Review Materials · doi:10.1103/physrevmaterials.6.045603 · Cited by 12
Dumont, P., Gupta, S., Martoïa, F., & Orgéas, L. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.120168 · Cited by 12
Rosendahl, J., Zarna, C., Håkansson, J., & Chinga‐Carrasco, G. (2023) · Bioengineering · doi:10.3390/bioengineering10010121 · Cited by 14
“Facilitated by these characteristics and the shear forces during extrusion, the nanofibrils aligned in the printing direction, as was demonstrated previously for cellulose nanocrystals [39].”
BackgroundKim, H., Kim, J., Ryu, K., Lee, J., Kim, H., Hyun, J., & Koo, J. (2023) · ACS Omega · doi:10.1021/acsomega.3c01165 · Cited by 12
Septevani, A. A., Evans, D. A. C., Hosseinmardi, A., Martin, D. J., Simonsen, J., Conley, J. F., & Annamalai, P. K. (2018) · Small · doi:10.1002/smll.201803439 · Cited by 12
Low temperature effects on the rheological properties of aqueous cellulose nanofiber suspensions
Towell, K. L. T., & Asenath‐Smith, E. (2024) · Cellulose · doi:10.1007/s10570-024-05965-y · Cited by 11
“Different forms of cellulose have been reported to align with the shear flow in the rheometer and during extrusion processes, decreasing the viscosity of the suspension (Hausmann et al. 2018).”
Yu, H., Hsieh, K.-L., Hirai, T., & Li, M. (2023) · Biomacromolecules · doi:10.1021/acs.biomac.3c00522 · Cited by 11
Mandin, S., Metilli, L., Karrouch, M., Lancelon‐Pin, C., Putaux, J., Chèvremont, W., Nicolas, P. E., Hengl, N., Jean, B., & Pignon, F. (2024) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.122162 · Cited by 11
“…freeze casting/ice templating (Deville, 2010; Mandin et al., 2021; Munier et al., 2016; Wegst et al., 2010), flow-through (Gevorkian et al., 2021; Hausmann et al., 2018; Nuruddin et al., 2021; Reising et al., 2012) and membrane separation (Chen et al., 2014; Jin et al., 2014, 2015; Metilli et…”
Guo, X., Jiao, H., Guo, X., Du, C., Shi, D., Wu, W., Jin, Y., & Jiang, B. (2025) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2025.108767 · Cited by 10
Choi, J., Thakur, D., Min, J., Lee, J., Kim, H., & Hyun, J. (2025) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2025.02.023 · Cited by 10
Nanotomography Investigation of 3D Printed Batteries with a Water-in-Salt Gel Polymer Electrolyte
Yen, D., Lin, C.-H., Sprouster, D., Zheng, X., Xiao, X., Lee, W.-K., Ge, M., & Chen‐Wiegart, Y. K. (2023) · ACS Materials Letters · doi:10.1021/acsmaterialslett.2c01133 · Cited by 10
Ghanbari, R., Terry, A. E., Wojno, S., Bek, M., Sekar, K., Sonker, A. K., Nygård, K., Ghai, V., Bianco, S., Liebi, M., et al. (2024) · Advanced Science · doi:10.1002/advs.202410920 · Cited by 9
Chen, Q., Shishvan, S. S., Zhang, S., Shaikeea, A. J. D., Park, J., Xu, Z., Kim, S., Hmeidat, N. S., Hemminger, H., Deshpande, V. S., et al. (2025) · Additive manufacturing · doi:10.1016/j.addma.2025.104783 · Cited by 9
Aqueous Cellulose Nanocrystal-Colloidal Au Inks for 2D Printed Photothermia
García‐Castrillo, M., Reguera, J., & Lizundia, E. (2024) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c05599 · Cited by 9
Zhang, X., Wang, Y., Wu, X., Zhu, F., Qin, Y., Chen, W., & Zheng, Q. (2022) · Biomaterials Advances · doi:10.1016/j.msec.2022.112654 · Cited by 10
Lin, X., Huang, C., Wu, P., Chai, H., Cai, C., Peng, Y. Y., Wang, J., Li, Y., Xu, D., & Li, X. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.130966 · Cited by 9
Patel, B. B., Chang, Y., Park, S. K., Wang, S., Rosheck, J. B., Patel, K., Walsh, D. J., Guironnet, D., & Diao, Y. (2021) · Journal of Polymer Science · doi:10.1002/pol.20210086 · Cited by 10
Yapa, M.-T., Sivasankarapillai, G., Lalevée, J., & Laborie, M. G. (2025) · Polymers · doi:10.3390/polym17030278 · Cited by 8
Raggio, J. I. C., Pardo, M., Núñez, P., Millán, C., Siqueira, G. D. F., Palza, H., Vivanco, J. F., & Aiyangar, A. K. (2025) · Polymers · doi:10.3390/polym17111554 · Cited by 10
Self-citationSun, S., Jiang, D., Zheng, H., Zhang, S., Cheng, Z., Mei, C., Tian, D. B., Yang, S., Yamauchi, Y., & Pan, M. (2026) · Advanced Science · doi:10.1002/advs.202520694 · Cited by 8
“This progressive redshift reflects the strengthening and reorganization of the hydrogen-bonding network caused by the introduction of BN/Ti 3 O 5 surfaces [ 38 ].”
Ren, Z., Lin, K.-Y., & Yu, S. (2023) · Biomacromolecules · doi:10.1021/acs.biomac.3c00959 · Cited by 8
Solvent-Dependent Dynamics of Cellulose Nanocrystals in Process-Relevant Flow Fields
Wang, R., He, H., Tian, J., Chodankar, S., Hsiao, B. S., & Rosén, T. (2024) · Langmuir · doi:10.1021/acs.langmuir.4c01846 · Cited by 8
Chen, M., Ma, W., Yao, S., Wan, B., He, Z., Kong, X., Li, D., Liu, D., & Xu, E. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.138670 · Cited by 8
Sarmah, A., Mee, R. D., Arole, K. D., Chi, D., Harkin, E. M., Dasari, S. S., Wright, A. J. K., Tran, T. Q., Rout, A., & Green, M. J. (2023) · Macromolecular Materials and Engineering · doi:10.1002/mame.202300174 · Cited by 8
Modulation of Tannic Acid on the Cholesteric Structure of Cellulose Nanocrystals
Jie, H., Feng, K., Lu, M., & Jin, Z. (2024) · Langmuir · doi:10.1021/acs.langmuir.4c00767 · Cited by 7
Microstructural ordering of nanofibers in flow-directed assembly
Gao, E., Wang, S., Duan, C., & Xu, Z. (2019) · Science China Technological Sciences · doi:10.1007/s11431-018-9421-5 · Cited by 7
Rheology of cellulose nanocrystals dispersed in dimethyl sulfoxide
Xu, J., Dong, Q., Liu, P., Cai, Z., & Liu, D. (2025) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2025.124300 · Cited by 6
A review on lignocellulosic fillers for sustainable thermoplastics
Baniasadi, H., Fazeli, M., Abidnejad, R., & Lizundia, E. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.180043 · Cited by 8
Near-wall dynamics of non-Brownian rod-like particle suspensions in confined shear flows
Chun, B., & Jung, H. W. (2025) · Journal of Fluid Mechanics · doi:10.1017/jfm.2025.225 · Cited by 6
Additive manufacturing of polymer matrix composites via direct ink writing process
Tang, T., Joralmon, D., Tiwari, L., Ravishekar, R., He, Q., Pham, L., Yang, Y., & Li, X. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-15917-6.00007-4 · Cited by 6
Additive Manufacturing of Recyclable, Highly Conductive, and Structurally Robust Graphite Structures
Mohammadi, M. M., Choi, S., Koirala, P., Jayatilaka, G. C., Ghousifam, N., Celio, H., & Tehrani, M. (2022) · Additive Manufacturing Letters · doi:10.1016/j.addlet.2022.100061 · Cited by 6
Brownian dynamics simulation on the parallel superposition rheology of a colloidal gel
Lee, Y. J., Jin, H., & Ahn, K. H. (2023) · Journal of Rheology · doi:10.1122/8.0000672 · Cited by 6
Jaekel, E. E., Ajdary, R., Holwell, N., Mathew, S. O., Amsden, B. G., France, K. J. D., Rojas, O. J., Antonietti, M., & Filonenko, S. (2024) · Advanced Materials Technologies · doi:10.1002/admt.202400549 · Cited by 5
Nanocellulose-based materials for photonic applications [Invited]
dos Santos, M. V., Pugina, R. S., Fontes, M. D. L., Onishi, B. S. D., Torres, F. R., Legnani, C., Cremona, M., Barud, H. D. S., & Ribeiro, S. J. L. (2025) · Optical Materials Express · doi:10.1364/ome.548069 · Cited by 4
Kobayashi, M., Worby, W. K. A., Kawaguchi, M., Yokoyama, Y., Ichihara, S., & Tagawa, Y. (2026) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2026.111708 · Cited by 6
“…is induced by the alignment of suspended anisotropic particles or macro-molecules (Peterlin, 1976; Pih, 1980; Hu et al., 2009; Sun and Huang, 2016; Hausmann et al., 2018; K´ad´ar et al., 2021), and the resulting phase retardation can be related to the stress field through the stress-optic law…”
Mapping MXene Alignment under Shear: An In Situ SAXS Study of Size-Dependent Orientation Dynamics
Zhang, J., Lynch, P. A., Usman, K. A. S., Qin, S. A., Mota-Santiago, P., & Razal, J. M. (2026) · ACS Nano · doi:10.1021/acsnano.5c22370 · Cited by 4
Three-dimensional (3D) printing of cellulose/metal-organic frameworks (CelloMOFs)-based materials
Abdelhamid, H. N. (2026) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2026.125436 · Cited by 4
Spatially Programmable Chirality in Cellulose Nanocrystal Films via Rotational Magnetic Flow
Jeon, J., Nepal, D., McConney, M. E., Bunning, T. J., & Tsukruk, V. V. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c12750 · Cited by 5
Cellulose nanocrystal dispersions conjugated with symmetric and asymmetric dialkylamine groups
Wojno, S., Sonker, A. K., Garg, M., Cooper, S., Rigdahl, M., Linares, M., Zozoulenko, I. V., Kádár, R., & Westman, G. (2024) · Cellulose · doi:10.1007/s10570-024-05900-1 · Cited by 4
“…conditions a rotation of the relative polarizer/analyzer angle did not result in any brightly colored areas (Kádár et al. 2021), we assign the onset of birefringence to the orientation of nanocrystals or aggregates thereof in the flow direction (Hausmann 2018) and not to any form of self-assembly.”
Tert-Butanol as a Structuring Agent for Cellulose Nanocrystal Fluids and Foams
Navarro, S. L., Orzan, E., Janewithayapun, R., Penttilä, P. A., Andersson, J., Ström, A., Kádár, R., & Nypelö, T. (2025) · Biomacromolecules · doi:10.1021/acs.biomac.5c00184 · Cited by 3
Understanding nonlinear rheology in anisotropic colloids: a review
Shim, Y. H. (2025) · Korea-Australia Rheology Journal · doi:10.1007/s13367-025-00133-5 · Cited by 3
“In anisotropic colloidal systems exhibiting liquid crystalline (LC) or micro-ordering, nonlinear rheological tests provide powerful insights into shear-induced structural evolution such as particle orientation, network connectivity, and LC domain breakdown under shear [54–62].”
Cellulose nanocrystals: Advancements and applications in 3D printing
Lee, W., Kuehnel, T., Andreu, A., Lee, J., Kim, H., & Yoon, Y. (2025) · Applied Materials Today · doi:10.1016/j.apmt.2025.103020 · Cited by 4
Amini, M., Hosseini, H., Hashemi, S. A., & Arjmand, M. (2025) · Advanced Materials Technologies · doi:10.1002/admt.202501324 · Cited by 3
“During the extrusion printing process, due to the shear-thinning nature of the prepared inks, the viscosity experiences a steady decrease, whereas the shear stress on the ink rises permanently [ 119, 120 ].”
Tailoring Crystallographic Texture Through Direct Ink Writing of Piezoelectric Ceramics
Mobin, M., Abdurrahmanoglu, C., Mishin, O. V., Gjørup, F. H., Jørgensen, M. R. V., Esposito, V., & Haugen, A. B. (2026) · Journal of the American Ceramic Society · doi:10.1111/jace.70687 · Cited by 3
“Also, modifications of the nozzle geometry (e.g., by reducing the cross-sectional area with a longer tapered nozzle) are expected to lead to improved alignment throughout the entire cross section of the printed line [ 55, 56 ].”
Mechanochemical Top-Down Isolation of Chitin Nanofibrils from Oyster Mushrooms
Urrestarazu, A., Salim, M. H., Kaniyamparambil, S. H., AbuZaid, M., Barandika, G., Tardy, B. L., & Lizundia, E. (2026) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6c00021 · Cited by 4
Bioinspired toughening of soft elastomer via embedded three‐dimensional printing
Zhang, L., Zhang, Y., Gong, M., Liu, M., Lin, X., Wang, D., & Hu, P. (2022) · Journal of Applied Polymer Science · doi:10.1002/app.52273 · Cited by 3
Wiwatsamphan, P., Tashiro, K., Sasaki, S., Kertsomboon, T., Pilasen, P., Maneechot, F., & Chirachanchai, S. (2025) · Biomacromolecules · doi:10.1021/acs.biomac.4c01705 · Cited by 2
Designing biomaterials with oriented organic nanocrystals for tissue engineering applications
Bosson, F., Hengl, N., Charbonnier, B., Guicheux, J., Pignon, F., & Delplace, V. (2025) · Acta Biomaterialia · doi:10.1016/j.actbio.2025.10.021 · Cited by 2
“Interestingly, it has been shown that the flow-induced alignment of nanocrystals in highly concentrated inks is only possible if the applied stress exceeds the yield strength of the suspension [74].”
Ruocco, G., Marcello, E., Paoletti, C., Salvi, M., Zoso, A., Spedicati, M., Carmagnola, I., & Chiono, V. (2025) · International Journal of Bioprinting · doi:10.36922/ijb025440455 · Cited by 3
“22,59 Additionally, f-ALG/Gel (2”
Strain, substrate, and matrix selection for controlled growth of wood-fungi
Hofer, S., Nussbaum, N., Fischer, P., & Rühs, P. A. (2025) · Soft Matter · doi:10.1039/d5sm00749f · Cited by 2
Self-citationMultiscale Nanocellulosic Biomaterials in Therapeutics and Food Sciences
Singh, H., Tardy, B. L., Mattos, B. D., Tripathi, S., Mujahid, M. H., Tammina, S. K., Mishra, N. C., Nanda, H. S., BANAT, F. A., & Hassan, S. (2026) · Small Structures · doi:10.1002/sstr.202500617 · Cited by 2
Polysaccharide-based 3D bioprinter inks for tissue engineering
Tahmasebifar, A., Yılmaz, B., & Baran, E. T. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-821230-1.00013-x · Cited by 3
Jäsberg, A., Puisto, A., Leppänen, I., Koponen, A., & Alava, M. J. (2023) · Cellulose · doi:10.1007/s10570-023-05072-4 · Cited by 2
“(1234567890) and three-dimensional printing (Hausmann et al. 2018).”
Thibaut, C. (2020) · theses.fr (ABES) · doi:10.70675/eb7d0ea8z0a77z451dzbfffzbb23bf8da8ab · Cited by 8
Alignment-Assisted Networks of Polyelectrolyte-Grafted Cellulose Nanocrystals
Ge, Y., & Akcora, P. (2023) · ACS Applied Engineering Materials · doi:10.1021/acsaenm.3c00378 · Cited by 1
Semensato, L. H., Santos, D. M. D., Jacinto, M. E., Leitão, A., Correa, D. S., & Filho, S. P. C. (2025) · ACS Applied Polymer Materials · doi:10.1021/acsapm.5c03524 · Cited by 1
Controlled‐Release Fertilizer: A Review on Biopolymers‐Based Composite, Fabrication, and Application
Amelia, D., Ilyas, R. A., Wahit, M. U., Hastuti, N., Klinkova, O., & Mahardika, M. (2026) · ChemBioEng Reviews · doi:10.1002/cben.70043 · Cited by 1
Bio-printed cellulose nanocrystal: Processing, fabrication, and biomedical applications
Kumar, D., Azhar, M., Sridhar, S. B., Shareef, J., Wadhwa, T., & Malviya, R. (2026) · JCIS Open · doi:10.1016/j.jciso.2026.100172 · Cited by 1
Firdaus, D. F., Kuswoyo, A., García-Sampedro, A., Hoek, S., Ghazali, M. I. M., Zou, M., Fruk, L., & Pattinson, S. W. (2026) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-026-01691-0 · Cited by 1
Polysaccharide‐Based Anisotropic Scaffolds for Tissue Engineering
Feng, Y., Xiang, J., Wang, Z., & Duan, B. (2026) · Advanced Functional Materials · doi:10.1002/adfm.75753 · Cited by 2
Brăileanu, P. I., Pascu, N. E., & Dobrescu, T. G. (2026) · Polymers · doi:10.3390/polym18101260 · Cited by 2
XTRUDE: A Process‐Informed Framework for High‐Fidelity Analysis of Hydrogel Extrusion
Sanaei, F., Bertsch, P., Lafosse, J., Leeuwenburgh, S. C. G., & Diba, M. (2026) · Advanced Functional Materials · doi:10.1002/adfm.78751 · Cited by 1
Flexible Piezoelectric Nanocomposite Energy Harvester for Extreme Temperature Applications
Nafari, A. (2019) · Deep Blue (University of Michigan) · Cited by 1
Dynamic Heterogeneous Hydrogels with Cellulose Nanocrystals
Huang, H. (2019) · eDiss (Georg-August-Universität Göttingen) · doi:10.53846/goediss-7361
Three-dimensional printing of conductive composite for wireless chemical sensor systems
Kim, T. (2019) · Summit (Simon Fraser University)
Cellulose nanocrystals : from extraction to biomedical application
Frost, B. A. (2021) · cIRcle (University of British Columbia) · doi:10.14288/1.0401877
Fabrication technology of biofiber based biocomposites
Sonkaria, S., Hwang, S.-K., & Kim, H. J. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-824543-9.00024-4
Bridging of man and machine: the design and fabrication of next generation bio-hybrid materials
Gomes, C. M. (2020) · Digital Repository Service (Northeastern University) · doi:10.17760/d20397587
Toward a Possibly Programmable Self‐organization?
Demoly, F., & André, J. (2022) · Wiley eBooks · doi:10.1002/9781394163786.ch4
Sun, Y. (2022) · MOspace Institutional Repository (University of Missouri) · doi:10.32469/10355/94293
Analytical Characterisation of 3D‐Printed Medicines
Lima, A. L., Barreto, L. C. L. D. S., & Filho, M. C. (2024) · Wiley eBooks · doi:10.1002/9781119836001.ch8
Worby, W. K. A., Yokoyama, Y., Kawaguchi, M., Kusuno, H., & Tagawa, Y. (2024) · doi:10.55037/lxlaser.21st.136
“Concentric cylinder-type (Lane et al., 2022), parallel plate-type (Hausmann et al., 2018; Worby et al., 2024) and cone plate-type (Oba & Inoue, 2016) rheometers have been reported due to their simple installation in an optical anisotropy measurement system.”
BackgroundSaadatmand Hashemi, S. (2023) · UWSpace (University of Waterloo)
Printable food in future: Material structure and property of 3D food ink
Hu, H., Yao, S., Chen, M., Niu, R., & Xu, E. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-33916-5.00014-x
Remodelling biomimetic collagen hydrogels by chemical and mechanical conditioning
Brun, J. (2023) · theses.fr (ABES) · doi:10.70675/104a66b1z3688z409cz8bf4zf528aa544d10 · Cited by 1
Nanocomposites cellulosiques anisotropes élaborés par ultrafiltration et réticulation UV
Mandin, S. (2024) · theses.fr (ABES) · doi:10.70675/39e33bd9z59acz4f3czb2e9z1e714ed595a5
Cellulose nanocrystals : From gels to solid materials
Morlet-Decarnin, L. (2024) · theses.fr (ABES) · doi:10.70675/d18e932czb59fz465eza5c3z37325d3c7b60
Zhang, X., Wu, X., Chu, Y., Gu, L., Liang, M., Yao, Y., Wang, X., Jin, Y., & Shao, L. (2026) · Advanced Fiber Materials · doi:10.1007/s42765-026-00725-y
Multiscale flow alignment in cellulose nanocrystals controlled by surface topology
Mishra, A. A., Sonker, A. K., Sekar, K., Bek, M., Terry, A. E., Nygård, K., Ansell, S., Westman, G., & Kádár, R. (2026) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2026.140913
Bajgiran, S. R., Oduro, E., Rau, D. A., & Cai, L. (2026) · Advanced Materials Technologies · doi:10.1002/admt.71288
Nanocellulose-based emulsion gels: Formation mechanisms, functionality and fat substitute design
Lin, J., Yang, J., Liu, X., Chen, F., & Xie, J. (2026) · Food Research International · doi:10.1016/j.foodres.2026.120759
Chia seed mucilage widens the thermal processing window of GelMA biomaterial inks
Karasu, S. N., & Demirtaş, T. T. (2026) · International Journal of Bioprinting · doi:10.36922/ijb026330358
Zhang, W., Lin, F., Xia, H., Zhou, W., Liu, J., He, Z., Ding, S., Lu, L., Liu, M., Li, H., et al. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.182207
Huang, J., Wang, H., Yue, Y., Liang, R., Lin, Q., Chen, J., Lun, H., Li, S., Lin, J., & Zhang, X. (2026) · Materials Horizons · doi:10.1039/d6mh01311b
Scopel, E., Massicotte, M., de Rezende, C. A., & Cranston, E. D. (2026) · ACS Omega · doi:10.1021/acsomega.6c06865
Bimrew, T. M., Fisha, D., Ashebir, M., Bedru, T. K., Abate, S. G., & Jayakumar, M. (2026) · Applied Food Research · doi:10.1016/j.afres.2026.102788
Hybrid cellulose in 3D/4D printing
Abdelhamid, H. N. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-43816-5.00027-5
Metadata
- Authors
- Hausmann, M. K., Rühs, P. A., Siqueira, G., Läuger, J., Libanori, R., Zimmermann, T., & Studart, A. R.
- Affiliations
- ETH Zurich (CH)
- Anton Paar Germany GmbH, Helmuth-Hirth-Strasse 6, D-73760 Ostfildern, Germany
- Empa (CH)
- Corresponding author
- Rühs, Patrick A.
- Siqueira, Gilberto
- Studart, André R.
- ORCID
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-07-05
- Volume
- 12
- Issue
- 7
- Pages
- 6926-6937
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2861423554
- Cited by
- 282
- References
- 83
- Citations by year
- 2026: 21 · 2025: 28 · 2024: 31 · 2023: 45 · 2022: 50 · 2021: 40 · 2020: 39 · 2019: 23 · 2018: 5
- FWCI
- 21.41
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ACS Nano (publishedVersion)
- PubMed (publishedVersion)
- DORA Empa (Swiss Federal Laboratories for Materials Science and Technology (Empa)) (submittedVersion)
- Funders
- Schweizerischer Nationalfonds zur F?rderung der Wissenschaftlichen Forschung (200021_159906/1, BSCGI0_157696)
- Innosuisse
- Topics
- Physical Sciences › Engineering › Building and Construction › Innovations in Concrete and Construction Materials
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Keywords
- cellulose nanocrystals, particle alignment, direct ink writing, concentrated suspensions, shear stress, steric interactions, hydrodynamic interactions, extensional flow, core-shell structure, anisotropic particles, material extrusion, composite materials, nozzle geometry
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.