Dynamics of Cellulose Nanocrystal Alignment during 3D Printing
The DOI matches its Crossref record; 85 of the 85 references it cites were found in a registry or an index.
Abstract
The alignment of anisotropic particles during ink deposition directly affects the microstructure and properties of materials manufactured by extrusion-based 3D printing. Although particle alignment in diluted suspensions is well described by analytical and numerical models, the dynamics of particle orientation in the highly concentrated inks typically used for printing via direct ink writing (DIW) remains poorly understood. Using cellulose nanocrystals (CNCs) as model building blocks of increasing technological relevance, we study the dynamics of particle alignment under the shear stresses applied to concentrated inks during DIW. With the help of in situ polarization rheology, we find that the time period needed for particle alignment scales inversely with the applied shear rate and directly with the particle concentration. Such dependences can be quantitatively described by a simple scaling relation and qualitatively interpreted in terms of steric and hydrodynamic interactions between particles at high shear rates and particle concentrations. Our understanding of the alignment dynamics is then utilized to estimate the effect of shear stresses on the orientation of particles during the printing process. Finally, proof-of-concept experiments show that the combination of shear and extensional flow in 3D printing nozzles of different geometries provides an effective means to tune the orientation of CNCs from fully aligned to core-shell architectures. These findings offer powerfu…
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“To achieve this, we exploited the shear thinning property of FIG inks (Supplementary Fig. 2h–i), which is not only essential for printing, but also for inducing fiber alignment along the direction of printing40.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [40]
Citations
Cites
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980
The motion of ellipsoidal particles immersed in a viscous fluid
Jeffery, G. B. (1922) · Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character · doi:10.1098/rspa.1922.0078 · Cited by 3,979
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Microfibrillated cellulose and new nanocomposite materials: a review
Siró, I., & Plackett, D. (2010) · Cellulose · doi:10.1007/s10570-010-9405-y · Cited by 2,883
Nature’s hierarchical materials
Fratzl, P., & Weinkamer, R. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.06.001 · Cited by 2,800
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Beck-Candanedo, S., Roman, M., & Gray, D. G. (2005) · Biomacromolecules · doi:10.1021/bm049300p · Cited by 1,588
Research works printed but not linked: 3
- Håkansson K., 2012, Trita-MEK
- Volker-Pop L. M., 2014, Chem. Listy, 108, 707
- 10.1002/(sici)1521-3935(19980401)199:4<471::aid-macp471>3.0.co;2-9 · doi:10.1002/(sici)1521-3935(19980401)199:4<471::aid-macp471>3.0.co;2-9
Cited by
Items 101–200 of 291
3D printing of responsive chiral photonic nanostructures
George, K., Esmaeili, M., Wang, J., Taheri‐Qazvini, N., Abbaspourrad, A., & Sadati, M. (2023) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2220032120 · Cited by 46
Lignin-graphene oxide inks for 3D printing of graphitic materials with tunable density
Roman, J., Néri, W., Fierro, V., Celzard, A., Bentaleb, A., Ly, I., Zhong, J., Derré, A., & Poulin, P. (2020) · Nano Today · doi:10.1016/j.nantod.2020.100881 · Cited by 47
“[25] This approach has allowed the realization of graphene microlattices [18,26].”
BackgroundWu, N., Li, B., Pan, F., Zhang, R., Liu, J., & Zeng, Z. (2022) · Science China Materials · doi:10.1007/s40843-022-2279-3 · Cited by 44
Zhang, R., Deng, L., Guo, J., Yang, H., Zhang, L., Cao, X., Yu, A., & Duan, B. (2021) · ACS Nano · doi:10.1021/acsnano.1c05956 · Cited by 44
Structured Electrode Additive Manufacturing for Lithium-Ion Batteries
Park, S., Shi, B., Shang, Y., Deng, K., & Fu, K. K. (2022) · Nano Letters · doi:10.1021/acs.nanolett.2c03545 · Cited by 43
Zhou, X., Ren, L., Liu, Q., Song, Z., Wu, Q., He, Y., Li, B., & Ren, L. (2021) · Macromolecular Bioscience · doi:10.1002/mabi.202100332 · Cited by 44
Xu, W., Zhu, Y., Ravichandran, D., Jambhulkar, S., Kakarla, M., Bawareth, M., Lanke, S., & Song, K. (2021) · ACS Applied Nano Materials · doi:10.1021/acsanm.1c01408 · Cited by 43
Organized mineralized cellulose nanostructures for biomedical applications
Feng, Y., Cölfen, H., & Xiong, R. (2023) · Journal of Materials Chemistry B · doi:10.1039/d2tb02611b · Cited by 41
Ravichandran, D., Xu, W., Jambhulkar, S., Zhu, Y., Kakarla, M., Bawareth, M., & Song, K. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c12763 · Cited by 45
Guo, Z., Fei, F., Song, X., & Zhou, C. (2023) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4056926 · Cited by 40
Ebers, L.-S., & Laborie, M. G. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c00800 · Cited by 41
Rosén, T., Wang, R., Zhan, C., He, H., Chodankar, S., & Hsiao, B. S. (2020) · Physical review. E · doi:10.1103/physreve.101.032610 · Cited by 39
Schönlein, R., Bhattarai, P., Raef, M., Larrañaga, X., Poudel, A., Biggs, M. J. P., Aguirresarobe, R., & Ugartemendia, J. M. (2025) · Biomaterials · doi:10.1016/j.biomaterials.2025.123522 · Cited by 44
Huang, J. T., Ma, X., Yang, G., & Dufresne, A. (2019) · Wiley eBooks · doi:10.1002/9783527807437.ch1 · Cited by 42
Exploration of elastomeric and polymeric liquid crystals with photothermal actuation: A review
Rastogi, P., Njuguna, J., & Kandasubramanian, B. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.109287 · Cited by 38
Younes, H. A., Kuang, X., Lou, D., DeVries, B., Rahman, M. M., & Hong, H. (2022) · Materials Research Bulletin · doi:10.1016/j.materresbull.2022.111938 · Cited by 38
Assembling nanocelluloses into fibrous materials and their emerging applications
Wang, B., Qiu, S., Chen, Z., Hu, Y., Shi, G., Zhuo, H., Zhang, H., & Zhong, L. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.120008 · Cited by 38
Sivaraman, D., Nagel, Y., Siqueira, G. D. F., Chansoria, P., Avaro, J. T., Neels, A., Nyström, G., Sun, Z., Wang, J., Pan, Z., et al. (2024) · Advanced Science · doi:10.1002/advs.202307921 · Cited by 37
Self-citationChary, P. S., Shaikh, S., Bhavana, V., Rajana, N., Vasave, R., & Mehra, N. K. (2024) · Applied Materials Today · doi:10.1016/j.apmt.2024.102334 · Cited by 43
Bahmani, A., Comeau, P., Montesano, J., & Willett, T. L. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107790 · Cited by 36
“By decreasing the nozzle tip diameter and increasing feed rate, shear stress can be increased [11,12].”
BackgroundZhao, M., Yang, D., Fan, S., Yao, X., Wang, J., Zhu, M., & Zhang, Y. (2021) · Advanced Science · doi:10.1002/advs.202104001 · Cited by 36
Additive‐Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels
Rebber, M., Trommler, M., Lokteva, I., Ehteram, S., Schropp, A., König, S. G., Fröba, M., & Koziej, D. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202112914 · Cited by 37
Capillary Flow Characterizations of Chiral Nematic Cellulose Nanocrystal Suspensions
Esmaeili, M., George, K., Rezvan, G., Taheri‐Qazvini, N., Zhang, R., & Sadati, M. (2022) · Langmuir · doi:10.1021/acs.langmuir.1c01881 · Cited by 36
3D printing of sponge spicules-inspired flexible bioceramic-based scaffolds
Yang, Z., Xue, J., Li, T., Zhai, D., Yu, X., Huan, Z., & Wu, C. (2022) · Biofabrication · doi:10.1088/1758-5090/ac66ff · Cited by 36
“Furthermore, the shear stress distribution in the nozzle could be calculated by using the Hagen– Poisseuille law and power law (supplementary discussion) [39, 40].”
Photoresponsive Movement in 3D Printed Cellulose Nanocomposites
Müller, L., Demongeot, A., Vaucher, J., Leterrier, Y., Avaro, J. T., Liebi, M., Neels, A., Burgert, I., Zimmermann, T., Nyström, G., et al. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c02154 · Cited by 36
Self-citationLotus-Root-Like Microchanneled Collagen Scaffold
Hwangbo, H., Kim, W.-J., & Kim, G. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c14670 · Cited by 34
Phase transitions of cellulose nanocrystal suspensions from nonlinear oscillatory shear
Wojno, S., Fazilati, M., Nypelö, T., Westman, G., & Kádár, R. (2022) · Cellulose · doi:10.1007/s10570-022-04474-0 · Cited by 34
Hierarchical Organization of Structurally Colored Cholesteric Phases of Cellulose via 3D Printing
Balcerowski, T., Özbek, B., Akbulut, Ö., & Dumanlı, A. G. (2022) · Small · doi:10.1002/smll.202205506 · Cited by 34
“[37-46] This wrinkling can be used to modify the structure of a sample, targeting properties which can be as simple as physical surface roughness or more complex like diffraction of light.”
Method3D‐Printed Anisotropic Nanofiber Composites with Gradual Mechanical Properties
Lackner, F., Knechtl, I., Novak, M., Nagaraj, C., Štiglic, A. D., Kargl, R., Olschewski, A., Kleinschek, K. S., & Mohan, T. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202201708 · Cited by 32
Spatially programmed alignment and actuation in printed liquid crystal elastomers
Telles, R., Kotikian, A., Freychet, G., Zhernenkov, M., Wąsik, P., Yavitt, B. M., Barrera, J., Cook, C. C., Pindak, R., Davidson, E., et al. (2025) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2414960122 · Cited by 35
“In recent experiments, Hausmann et al. ( 30 ) used polarized optical microscopy to quantify alignment during capillary flow of highly concentrated inks containing rod - like particles.”
3D printing of cellulose nanofiber monoliths for thermal insulation and energy storage applications
Zhou, G., Li, M., Wang, F., Liu, C., & Mei, C. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103124 · Cited by 32
Soft Bacterial Cellulose Microcapsules with Adaptable Shapes
Song, J., Babayekhorasani, F., & Spicer, P. T. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b01143 · Cited by 31
Biomimetic bioinks of nanofibrillar polymeric hydrogels for 3D bioprinting
Wang, Y., Li, J., Li, Y., & Yang, B. (2021) · Nano Today · doi:10.1016/j.nantod.2021.101180 · Cited by 35
Smirnov, M. A., Fedotova, V. S., Sokolova, M. P., Nikolaeva, A. L., Elokhovskiy, V., & Karttunen, M. (2021) · Polymers · doi:10.3390/polym13183044 · Cited by 31
Wojno, S., Ahlinder, A., Altskär, A. I., Stading, M., Abitbol, T., & Kádár, R. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.120622 · Cited by 32
3D Printed Porous Cellulose Nanocomposite Hydrogel Scaffolds
Sultan, S., & Mathew, A. P. (2019) · Journal of Visualized Experiments · doi:10.3791/59401 · Cited by 28
Structure-property relationship of a soft colloidal glass in simple and mixed flows
Calabrese, V., Varchanis, S., Haward, S. J., TSAMOPOULOS, J. A., & Shen, A. Q. (2021) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2021.05.103 · Cited by 29
Birefringent properties of aqueous cellulose nanocrystal suspensions
Lane, C. P., Rode, D., & Rösgen, T. (2022) · Cellulose · doi:10.1007/s10570-022-04646-y · Cited by 28
“2021a), plate-plate geometries (Hausmann et al. 2018; Mykhaylyk et al. 2016) or Taylor-Couette type settings (Cerf and Scheraga 1952).”
Microscale 3D Printing and Tuning of Cellulose Nanocrystals Reinforced Polymer Nanocomposites
Groetsch, A., Stelzl, S., Nagel, Y., Kochetkova, T., Scherrer, N. C., Ovsianikov, A., Michler, J., Pethő, L., Siqueira, G. D. F., Nyström, G., et al. (2022) · Small · doi:10.1002/smll.202202470 · Cited by 28
Self-citationRecent Advances in Cellulose-Based Hydrogels Prepared by Ionic Liquid-Based Processes
Taokaew, S. (2023) · Gels · doi:10.3390/gels9070546 · Cited by 29
“Such particle alignment by shear stresses (shear-inducing flow) is intrinsically present in extrusion-based 3D printing processes [210,213].”
BackgroundWang, X., Feng, N., Shi, Z., Zhou, N., Lu, J., Huang, J. T., & Gan, L. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.117949 · Cited by 27
Multicolored Nanocolloidal Hydrogel Inks
Morozova, S. M., Statsenko, T. G., Ryabchenko, E. O., Gevorkian, A., Adibnia, V., Lozhkin, M. S., Kireynov, A. V., & Kumacheva, E. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202105470 · Cited by 27
Aleem, A. R., Shahzadi, L., Nasir, M., Hajivand, P., Alvi, F., Akhtar, A., Zehra, M., Mehmood, A., & Yar, M. (2021) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34981 · Cited by 27
Latif, M., Jiang, Y., Kumar, B., Song, J. M., Cho, H. C., & Kim, J. (2022) · Advanced Materials Interfaces · doi:10.1002/admi.202200280 · Cited by 27
Pignon, F., Semeraro, E. F., Chèvremont, W., Bodiguel, H., Hengl, N., Karrouch, M., & Sztucki, M. (2021) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.1c03506 · Cited by 26
Additive Manufacturing with Cellulose‐Based Composites: Materials, Modeling, and Applications
De, S., Rukmani, S. J., Zhao, X., Clarkson, C. M., Vautard, F., Bhagia, S., Goswami, M., Zhang, S., Elyas, S. F., Zhao, W. T., et al. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202414222 · Cited by 28
Domènech, B., Tan, A. T. L., Jelitto, H., Berodt, E. Z., Blankenburg, M., Focke, O., Cann, J. L., Taşan, C. C., Ciacchi, L. C., Müller, M., et al. (2020) · Advanced Engineering Materials · doi:10.1002/adem.202000352 · Cited by 26
Wang, T., Lu, S., Hu, X., Xu, B. Z., Bai, C., Ma, T., & Song, Y. (2024) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2024.109780 · Cited by 25
Wang, B., Ding, G., Chen, K., Jia, S., Wei, J., Wang, Y., He, R., & Shao, Z. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49164 · Cited by 25
Rheological fingerprinting and applications of cellulose nanocrystal based composites: A review
Tom, C., Sangitra, S. N., & Pujala, R. K. (2022) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2022.121011 · Cited by 24
Zhang, R., Guo, J., Yang, X., Jiang, X., Zhang, L., Zhou, J., Cao, X., & Duan, B. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c18569 · Cited by 24
Pickering emulsion ink in additive manufacturing: A state-of-the-art review
Lim, H.-P., Karandagaspitiya, C. O., Chan, D. K.-H., Low, L.-E., Tey, B. T., & Chan, E. (2023) · Additive manufacturing · doi:10.1016/j.addma.2023.103677 · Cited by 27
A 3D printing strategy for fabricating in situ topographical scaffolds using pluronic F-127
Lee, J., Chae, S., Lee, H., & Kim, G. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.101023 · Cited by 30
Vidakis, N., Petousis, M., Michailidis, N., David, C., Mountakis, N., Papadakis, V., Sfakiotakis, E., Sagris, D., & Argyros, A. (2024) · Cellulose · doi:10.1007/s10570-024-05851-7 · Cited by 23
“They have been used in hydrogels (Wang et al. 2018; Du et al. 2019; Ma et al. 2021; He and Lu 2023) and inks (Hausmann et al. 2018)for the development of scaffolds (Li et al. 2019a), often in VPP 3D printing (Palaganas et al. 2017; Li et al. 2019b).”
Innovative Applications of Nanocellulose in 3D Printing: A Review
Tong, Y., Jiang, C., Ji, C., Liu, W., & Wang, Y. (2024) · Small · doi:10.1002/smll.202407956 · Cited by 23
Anisotropic, Strong, and Thermally Insulating 3D‐Printed Nanocellulose–PNIPAAM Aerogels
Nagel, Y., Sivaraman, D., Neels, A., Zimmermann, T., Zhao, S., Siqueira, G. D. F., & Nyström, G. (2023) · Small Structures · doi:10.1002/sstr.202300073 · Cited by 23
Self-citationLackner, F., Šurina, P., Fink, J., Kotzbeck, P., Kolb, D., Stana, J., Grab, M., Hagl, C. M., Tsilimparis, N., Mohan, T., et al. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202302348 · Cited by 23
Thermoelectric nanowires for dense 3D printed architectures
Zhang, D., Ramiah, J., Cagirici, M., Sağlık, K., Solco, S. F. D., Cao, J., Xu, J., & Suwardi, A. (2023) · Materials Horizons · doi:10.1039/d3mh01646c · Cited by 23
Sun, W., Song, Z., Wang, J., Yi, Z., & He, M. Y. (2024) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.121946 · Cited by 26
Roughness-dependent clogging of particle suspensions flowing into a constriction
Hsu, C.-P., Baysal, H. E., Wirenborn, G., Mårtensson, G., Wittberg, L. P., & Isa, L. (2021) · Soft Matter · doi:10.1039/d1sm00738f · Cited by 23
Development of a Hybrid Nanoink for 3D Bioprinting of Heterogeneous Tumor Models
Burkholder-Wenger, A. C., Golzar, H., Wu, Y., & Tang, X. S. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c01265 · Cited by 22
Design of soft matter for additive processing
Chan, C. L. C., Taylor, J. M., & Davidson, E. (2022) · Nature Synthesis · doi:10.1038/s44160-022-00115-3 · Cited by 22
3D Bioprinting of Diatom‐Laden Living Materials for Water Quality Assessment
Boons, R., Siqueira, G. D. F., Grieder, F., Kim, S., Giovanoli, D., Zimmermann, T., Nyström, G., Coulter, F. B., & Studart, A. R. (2023) · Small · doi:10.1002/smll.202300771 · Cited by 22
Self-citationFernández‐Gil, F., Olate‐Moya, F., Aguilar-Cosme, J. R., Molleja, J. G., Fernandéz‐Blázquez, J. P., Cartmell, S. H., & Palza, H. (2025) · Materials & Design · doi:10.1016/j.matdes.2025.113672 · Cited by 21
Rheology of liquid crystalline oligomers for 3-D printing of liquid crystalline elastomers
Bauman, G. E., Koch, J. A., & White, T. J. (2022) · Soft Matter · doi:10.1039/d2sm00166g · Cited by 22
Prestrain Programmable 4D Printing of Nanoceramic Composites with Bioinspired Microstructure
Li, T., Liu, Q., Qi, H., & Zhai, W. (2022) · Small · doi:10.1002/smll.202204032 · Cited by 22
Processing dynamics of carbon nanotube-epoxy nanocomposites during 3D printing
Khater, A. Z., Saadi, M. A. S. R., Bhattacharyya, S. P., Kutana, A., Tripathi, M., Kamble, M., Song, S., Lou, M., Barnes, M., Meyer, M. D., et al. (2023) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2023.101617 · Cited by 24
“Previous studies on DIW of nanocomposites have shown that the shear forces arising during extrusion through the micronozzle align nanofillers, i.e., 2D materials, 51 MXenes, 26 and cellulose nanocrystals, 24 in the matrix during printing.”
Nakamine, K., Yokoyama, Y., Worby, W. K. A., Muto, M., & Tagawa, Y. (2024) · Cellulose · doi:10.1007/s10570-024-06045-x · Cited by 21
“This birefringence property of a fluid (or flow birefringence) appears when the particles are under a mechanical force (corresponding to shear in our case) and are aligned in a uniform direction (Hausmann et al., 2018; Calabrese et al., 2021b).”
Latif, M., Jiang, Y., Kumar, B., Cho, H. C., Song, J. M., & Kim, J. (2022) · ACS Applied Nano Materials · doi:10.1021/acsanm.2c00151 · Cited by 20
Molecular and Colloidal Transport in Bacterial Cellulose Hydrogels
Babayekhorasani, F., Hosseini, M., & Spicer, P. T. (2022) · Biomacromolecules · doi:10.1021/acs.biomac.2c00178 · Cited by 20
3D-Printed Interfacially Jammed Emulsion Aerogels
Hashemi, S. A., Ghaffarkhah, A., Hosseini, H., & Arjmand, M. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c09971 · Cited by 20
Pilot-Scale Production of Cellulosic Nanowhiskers With Similar Morphology to Cellulose Nanocrystals
Wang, H., Zhu, J. J., Ma, Q., Agarwal, U. P., Gleisner, R., Reiner, R., Báez, C., & Zhu, J. Y. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.565084 · Cited by 20
“, 2019) and 3D printing (Jia et al., 2017; Palaganas et al., 2017; Hausmann et al., 2018; Sultan and Mathew, 2018; Wang et al., 2018; Li et al., 2019) for which dispersibility and proper morphology, not crystallinity, are the keys to performance.”
BackgroundWood Warping Composite by 3D Printing
Kam, D., Levin, I., Kutner, Y., Lanciano, O., Sharon, E., Shoseyov, O., & Magdassi, S. (2022) · Polymers · doi:10.3390/polym14040733 · Cited by 19
“It means that at rest, the viscosity of the ink is high, and therefore prevents it from dripping from the extruder nozzle, but as pressure is applied by the syringe piston, the viscosity drops and enables the smooth flow of ink [19].”
BackgroundComprehensive review of 3D/4D printing of soft materials, methods and applications
Abdullah, M. R., Peng, Z. G., Rajendren, V. B., Ahmad, F., Shah, S. S. A., Zia, A. W., Ali, A., Qiao, G., & Shehzad, K. (2025) · Applied Materials Today · doi:10.1016/j.apmt.2025.102667 · Cited by 26
Chen, X., Zhou, Y., Zhou, S., Zhang, D., Zeng, L., Zhou, C., & Liu, M. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.08.024 · Cited by 23
“During 3D printing, the HNTs form a preferred orientation due to extrusion shear force [47].”
3D printed anti-swelling hydrogel scaffold with dialdehyde cellulose nanocrystals
Ke, W.-T., Cheng, D.-Y., Wu, I.-F., & Liao, Y. (2024) · Cellulose · doi:10.1007/s10570-024-05789-w · Cited by 18
“When the gel is extruded through the nozzle, the stick-shaped laponite nano-particles are forced to re-arrange their orientations to comply with the imposed shear stress (Hausmann et al. 2018).”
Shear melting and recovery of crosslinkable cellulose nanocrystal–polymer gels
Rao, A., Divoux, T., McKinley, G. H., & Hart, A. J. (2019) · Soft Matter · doi:10.1039/c8sm02647e · Cited by 18
Lee, Y. J., Jin, H., Kim, S., Myung, J. S., & Ahn, K. H. (2021) · Journal of Rheology · doi:10.1122/8.0000161 · Cited by 19
Dee, P., Tan, S., & Ferrand, H. L. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v8i2.551 · Cited by 18
“4 holds for particles at high solid loadings and low shear rate[37], the relationship in Equation (3.”
BackgroundA sequential mobile packing algorithm for micromechanical assessment of heterogeneous materials
Bahmani, A., Nooraie, R. Y., Willett, T. L., & Montesano, J. (2023) · Composites Science and Technology · doi:10.1016/j.compscitech.2023.110008 · Cited by 17
Injectable Hydrogels: A Paradigm Tailored with Design, Characterization, and Multifaceted Approaches
Singhal, R., Sarangi, M. K., & Rath, G. (2024) · Macromolecular Bioscience · doi:10.1002/mabi.202400049 · Cited by 17
Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures
Jalili, R., Satalov, A., Nazari, S., Suryanto, B. H. R., Sun, J., Ghasemian, M. B., Mayyas, M., Kandjani, A. E., Sabri, Y. M., Mayes, E. L. H., et al. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c05025 · Cited by 18
Abdal‐hay, A., Bartnikowski, M., Blaudez, F., Vaquette, C., Hutmacher, D. W., & Ivanovski, S. (2023) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2023.107670 · Cited by 17
Kelly, P. V., Es‐haghi, S. S., Ahmad, A., Lamm, M. E., Copenhaver, K., Alyamaç, E., Ozcan, S., Gardner, D. J., & Gramlich, W. M. (2024) · RSC Applied Polymers · doi:10.1039/d4lp00283k · Cited by 16
Rodríguez-Palomo, A., Lutz‐Bueno, V., Guizar‐Sicairos, M., Kádár, R., Andersson, M., & Liebi, M. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102289 · Cited by 16
“Furthermore, conditions for particle orientation during 3D printing have been assessed for cellulose nanocrystal suspensions, which rely on inducing stresses above the yield stress of the sample [14].”
BackgroundBiopolymer Composites Material Extrusion and their Applications: A Review
Li, D., Yang, Y., Elias, A. L., Yan, N., & Guo, F. (2023) · Advanced Engineering Materials · doi:10.1002/adem.202301048 · Cited by 17
Progress, Challenge, and Perspective of Fabricating Cellulose
Qiao, H., Li, M., Wang, C., Zhang, Y., & Zhou, H. (2022) · Macromolecular Rapid Communications · doi:10.1002/marc.202200208 · Cited by 15
Velásquez, S. T. R., Jang, D., Thomas, J. A., Grysan, P., Korley, L. T. J., & Bruns, N. (2025) · Polymer Chemistry · doi:10.1039/d4py01283f · Cited by 15
Slow dynamics and time–composition superposition in gels of cellulose nanocrystals
Morlet-Decarnin, L., Divoux, T., & Manneville, S. (2022) · The Journal of Chemical Physics · doi:10.1063/5.0085660 · Cited by 15
Neubauer, V. J., Hüter, F., Wittmann, J., Trossmann, V. T., Kleinschrodt, C., Alber-Laukant, B., Rieg, F., & Scheibel, T. (2022) · Biomolecules · doi:10.3390/biom12101413 · Cited by 15
“When running the simulation with no slip conditions assumed at the cartridge walls, a core-shell effect of both materials was found (Figure 1c) in addition to mixing, as reported earlier [45].”
ResultEngineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs
Esmaeili, M., Akbari, E., George, K., Rezvan, G., Taheri‐Qazvini, N., & Sadati, M. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01286-0 · Cited by 15
“The orientation of liquid crystalline phases can be directed during DIW to program the anisotropic properties in printed materials [21, 26, 27].”
BackgroundMethodWorby, W. K. A., Nakamine, K., Yokoyama, Y., Muto, M., & Tagawa, Y. (2024) · Scientific Reports · doi:10.1038/s41598-024-73087-3 · Cited by 14
4D printing of natural materials: A review
Arsuffi, B., Magrini, T., Champeau, M., Siqueira, G. D. F., & Titotto, S. (2025) · Sustainable materials and technologies · doi:10.1016/j.susmat.2025.e01346 · Cited by 23
Self-citation3D Hollow Xerogels with Ordered Cellulose Nanocrystals for Tailored Mechanical Properties
Yang, Y., Huang, H., Xu, D., Wang, X., Chen, Y., Wang, X., & Zhang, K. (2021) · Small · doi:10.1002/smll.202104702 · Cited by 14
Nanocellulose‐based soft actuators and their applications
Cui, Y., Lin, J., Wu, Y.-T., Chen, M., Yang, X., & Chang, C. (2023) · Journal of Polymer Science · doi:10.1002/pol.20230440 · Cited by 13
Self-Assembled Piezoelectric Films from Aligned Lysozyme Protein Fibrils
Gito, D. A. D., Akbarinejad, A., Dixon, A. W., Loho, T. A., Nieuwoudt, M. K., Chen, Q., Domigan, L. J., & Malmström, J. (2025) · Biomacromolecules · doi:10.1021/acs.biomac.4c01305 · Cited by 13
“66 However, using CPL is insufficient to determine if the polarization image is from linear retardance due to structural anisotropy (linear birefringence) as well as the orientation of the optical anisotropy.”
Impressive merits of Nanocellulose driving sustainable beauty
Wang, X., Zhong, C., Zhong, Y., Fan, Z., Liu, Z., Xu, P., Deng, X., Guo, J., Sawant, T. R., Zhou, M., et al. (2025) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2025.123270 · Cited by 15
Nanocrystalline Cellulose as a Versatile Engineering Material for Extrusion-Based Bioprinting
Read, S. A., Go, C. S., Ferreira, M. J. S., Ligorio, C., Kimber, S. J., Dumanlı, A. G., & Domingos, M. A. N. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15102432 · Cited by 14
“Interestingly, Alg1CNC1 exhibits a plateau region at higher shear rates, which is likely due to CNC orientation reaching its maximum degree along the direction of the applied shear, as previously reported [30–32].”
MethodResultCellulose‐Based Microparticles for Magnetically Controlled Optical Modulation and Sensing
Hausmann, M. K., Hauser, A., Siqueira, G. D. F., Libanori, R., Vehusheia, S. L. K., Schuerle, S., Zimmermann, T., & Studart, A. R. (2019) · Small · doi:10.1002/smll.201904251 · Cited by 13
Self-citationIs order creation through disorder in additive manufacturing possible?
Demoly, F., & André, J. (2021) · Cogent Engineering · doi:10.1080/23311916.2021.1889110 · Cited by 13
Metadata
- Authors
- Hausmann, M. K., Rühs, P. A., Siqueira, G., Läuger, J., Libanori, R., Zimmermann, T., & Studart, A. R.
- Affiliations
- ETH Zurich (CH)
- Anton Paar Germany GmbH, Helmuth-Hirth-Strasse 6, D-73760 Ostfildern, Germany
- Empa (CH)
- Corresponding author
- Rühs, Patrick A.
- Siqueira, Gilberto
- Studart, André R.
- ORCID
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-07-05
- Volume
- 12
- Issue
- 7
- Pages
- 6926-6937
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2861423554
- Cited by
- 282
- References
- 83
- Citations by year
- 2026: 21 · 2025: 28 · 2024: 31 · 2023: 45 · 2022: 50 · 2021: 40 · 2020: 39 · 2019: 23 · 2018: 5
- FWCI
- 21.41
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ACS Nano (publishedVersion)
- PubMed (publishedVersion)
- DORA Empa (Swiss Federal Laboratories for Materials Science and Technology (Empa)) (submittedVersion)
- Funders
- Schweizerischer Nationalfonds zur F?rderung der Wissenschaftlichen Forschung (200021_159906/1, BSCGI0_157696)
- Innosuisse
- Topics
- Physical Sciences › Engineering › Building and Construction › Innovations in Concrete and Construction Materials
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Keywords
- cellulose nanocrystals, particle alignment, direct ink writing, concentrated suspensions, shear stress, steric interactions, hydrodynamic interactions, extensional flow, core-shell structure, anisotropic particles, material extrusion, composite materials, nozzle geometry
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.