The DOI matches its Crossref record; 70 of the 70 references it cites were found in a registry or an index.
Bioinspired Ultrasensitive and Stretchable MXene-Based Strain Sensor via Nacre-Mimetic Microscale “Brick-and-Mortar” Architecture
Abstract
The development of wearable strain sensors with simultaneous large stretchability (strain >55%) and high sensitivity (gauge factor >100) remains a grand challenge to this day. Drawing on inspiration from nature, nacre has demonstrated outstanding mechanical properties, especially combining high strength and toughness, which is due in part to its delicate hierarchical layered architecture with rich interfacial interactions. We demonstrate that strain sensors based on this nacre-mimetic microscale “brick-and-mortar” architecture can simultaneously achieve ultrahigh sensitivity and large stretchability while performing well in linearity, reliability, long-term durability, and monotonicity. The bioinspired sensor demonstrated a gauge factor >200 over a range of working strains up to 83% and achieved a high gauge factor exceeding 8700 in the strain region of 76–83%. This successful combination of high sensitivity and large stretchability is attributed to (1) the microscale hierarchical architecture derived from the amalgamation of 2D titanium carbide (MXene) Ti 3 C 2 T x /1D silver nanowire “brick” and poly(dopamine)/Ni 2+ “mortar” and (2) the synergistic toughing effects from interfacial interactions of hydrogen and coordination bonding, layer slippage, and molecular chain stretching. The synergistic behavior of the “brick” and “mortar” allows for controlled crack generation for high sensitivity but can also dissipate considerable loading energy to promote the stepwise propagation of cracks while stretching, guaranteeing the significant comprehensive sensing performance. Moreover, this bioinspired strain sensor is employed to monitor human activities under different motion states to demonstrate its feasibility for wearable, full-spectrum human health and motion monitoring systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mussel-inspired surface chemistry for multifunctional coatings
Lee, H., Dellatore, S. M., Miller, W. M., & Messersmith, P. B. (2007) · Science · doi:10.1126/science.1147241 · Cited by 10,965
Brown, I. D., & Altermatt, D. (1985) · Acta Crystallographica Section B Structural Science · doi:10.1107/s0108768185002063 · Cited by 9,514
2D metal carbides and nitrides (MXenes) for energy storage
Anasori, B., Lukatskaya, M. R., & Gogotsi, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.98 · Cited by 7,440
Electromagnetic interference shielding with 2D transition metal carbides (MXenes)
Shahzad, F., Alhabeb, M., Hatter, C. B., Anasori, B., Man Hong, S., Koo, C. M., & Gogotsi, Y. (2016) · Science · doi:10.1126/science.aag2421 · Cited by 5,201
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
A stretchable carbon nanotube strain sensor for human-motion detection
Yamada, T., Hayamizu, Y., Yamamoto, Y., Yomogida, Y., Izadi-Najafabadi, A., Futaba, D. N., & Hata, K. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.36 · Cited by 3,247
Stretchable, Skin-Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review
Amjadi, M., Kyung, K., Park, I., & Sitti, M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504755 · Cited by 3,202
Highly Stretchable and Sensitive Strain Sensor Based on Silver Nanowire–Elastomer Nanocomposite
Amjadi, M., Pichitpajongkit, A., Lee, S., Ryu, S., & Park, I. (2014) · ACS Nano · doi:10.1021/nn501204t · Cited by 2,350
Flexible and conductive MXene films and nanocomposites with high capacitance
Ling, Z., Ren, C. E., Zhao, M.-Q., Yang, J., Giammarco, J. M., Qiu, J., Barsoum, M. W., & Gogotsi, Y. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1414215111 · Cited by 2,274
X-ray photoelectron spectroscopy of select multi-layered transition metal carbides (MXenes)
Halim, J., Cook, K. M., Naguib, M., Eklund, P., Gogotsi, Y., Rosen, J., & Barsoum, M. W. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2015.11.089 · Cited by 2,047
Cited by
Lim, H., Kim, H. S., Qazi, R., Kwon, Y., Jeong, J., & Yeo, W. (2020) · Advanced Materials · doi:10.1002/adma.201901924 · Cited by 1,002
Jiang, X., Kuklin, A. V., Baev, A., Ge, Y., Ågren, H., Zhang, H., & Prasad, P. N. (2020) · Physics Reports · doi:10.1016/j.physrep.2019.12.006 · Cited by 914
Ti3C2TX MXene for Sensing Applications: Recent Progress, Design Principles, and Future Perspectives
Pei, Y., Zhang, X., Hui, Z., Zhou, J., Huang, X., Sun, G., & Huang, W. (2021) · ACS Nano · doi:10.1021/acsnano.1c00248 · Cited by 799
Wearable and Stretchable Strain Sensors: Materials, Sensing Mechanisms, and Applications
Souri, H., Banerjee, H., Jusufi, A., Radacsi, N., Stokes, A. A., Park, I., Sitti, M., & Amjadi, M. (2020) · Advanced Intelligent Systems · doi:10.1002/aisy.202000039 · Cited by 681
Flexible MXene‐Based Composites for Wearable Devices
Ma, C., Ma, M., Si, C., Ji, X., & Wan, P. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009524 · Cited by 544
An overview of tailoring strain delocalization for strength-ductility synergy
Wu, H., & Fan, G. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100675 · Cited by 536
Development of Conductive Hydrogels for Fabricating Flexible Strain Sensors
Li, G., Li, C., Li, G., Yu, D., Song, Z., Wang, H., Liu, X., Liu, H., & Liu, W. (2022) · Small · doi:10.1002/smll.202101518 · Cited by 509
Self-citationLuo, J., Gao, S., Luo, H., Wang, L., Huang, X., Guo, Z., Lai, X., Lin, L., Li, R. K. Y., & Gao, J. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126898 · Cited by 483
Sensing with MXenes: Progress and Prospects
Ho, D. H., Choi, Y. Y., Jo, S. B., Myoung, J., & Cho, J. H. (2021) · Advanced Materials · doi:10.1002/adma.202005846 · Cited by 482
Zheng, Y., Yin, R., Zhao, Y., Liu, H., Zhang, D., Shi, X., Zhang, B., Liu, C., & Shen, C. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127720 · Cited by 469
Self-citation2D Material Optoelectronics for Information Functional Device Applications: Status and Challenges
Tan, T., Jiang, X., Wang, C., Yao, B., & Zhang, H. (2020) · Advanced Science · doi:10.1002/advs.202000058 · Cited by 458
Self-citation2D Transition Metal Carbides (MXenes): Applications as an Electrically Conducting Material
Shahzad, F., Iqbal, A., Kim, H., & Koo, C. M. (2020) · Advanced Materials · doi:10.1002/adma.202002159 · Cited by 451
MXene Printing and Patterned Coating for Device Applications
Zhang, Y., Wang, Y., Jiang, Q., El‐Demellawi, J. K., Kim, H., & Alshareef, H. N. (2020) · Advanced Materials · doi:10.1002/adma.201908486 · Cited by 449
Cao, M., Wang, X., Zhang, M., Cao, W., Fang, X., & Yuan, J. (2020) · Advanced Materials · doi:10.1002/adma.201907156 · Cited by 441
Ti3C2Tx MXene-Based Flexible Piezoresistive Physical Sensors
Wang, Y., Yue, Y., Cheng, F., Cheng, Y., Ge, B., Liu, N., & Gao, Y. (2022) · ACS Nano · doi:10.1021/acsnano.1c09925 · Cited by 406
Surface functionalization of MXenes
Mozafari, M., & Soroush, M. (2021) · Materials Advances · doi:10.1039/d1ma00625h · Cited by 395
Chaudhary, V., Kaushik, A., Furukawa, H., & Khosla, A. (2022) · ECS Sensors Plus · doi:10.1149/2754-2726/ac5ac6 · Cited by 386
Wang, H., Zhou, R., Li, D., Zhang, L., Ren, G., Wang, L., Liu, J., Wang, D., Tang, Z., Lu, G., et al. (2021) · ACS Nano · doi:10.1021/acsnano.1c00259 · Cited by 364
Self-citationRecent Advances in Functional 2D MXene‐Based Nanostructures for Next‐Generation Devices
Huang, W., Hu, L., Tang, Y., Xie, Z., & Zhang, H. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202005223 · Cited by 359
MXene‐Reinforced Cellulose Nanofibril Inks for 3D‐Printed Smart Fibres and Textiles
Cao, W., Ma, C., Mao, D., Zhang, J., Ma, M., & Chen, F. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201905898 · Cited by 332
Self-citationCai, Y., Shen, J., Yang, C.-W., Wan, Y., Tang, H.-L., Aljarb, A. A., Chen, C., Fu, J.-H., Wei, X., Huang, K.-W., et al. (2020) · Science Advances · doi:10.1126/sciadv.abb5367 · Cited by 329
3D‐Printed Stretchable Micro‐Supercapacitor with Remarkable Areal Performance
Li, X., Li, H., Fan, X., Shi, X., & Liang, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903794 · Cited by 321
Self-citationHarito, C., Bavykin, D. V., Yuliarto, B., Dipojono, H. K., & Walsh, F. C. (2019) · Nanoscale · doi:10.1039/c9nr00117d · Cited by 287
Pu, J.-H., Zhao, X., Zha, X.-J., Bai, L., Ke, K., Bao, R.-Y., Liu, Z.-Y., Yang, M.-B., & Yang, W. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta04352g · Cited by 279
Cao, J., Zhou, Z., Song, Q., Chen, K., Su, G., Zhou, T., Zheng, Z., Lu, C., & Zhang, X. (2020) · ACS Nano · doi:10.1021/acsnano.0c01779 · Cited by 279
MXene/Polymer Nanocomposites: Preparation, Properties, and Applications
Chen, X., Zhao, Y., Li, L., Wang, Y., Wang, J., Xiong, J., Du, S., Zhang, P., Shi, X., & Yu, J. (2021) · Polymer Reviews · doi:10.1080/15583724.2020.1729179 · Cited by 279
Self-citationMao, M., Yu, K.-X., Cao, C.-F., Gong, L.-X., Zhang, G.-D., Zhao, L., Song, P., Gao, J.-F., & Tang, L.-C. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131615 · Cited by 276
MXenes and Their Applications in Wearable Sensors
Xin, M., Li, J., Ma, Z., Pan, L., & Shi, Y. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2020.00297 · Cited by 246
Metadata
- Authors
- Shi, X., Wang, H., Xie, X., Xue, Q., Zhang, J., Kang, S., Wang, C., Liang, J., & Chen, Y.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-12-19
- Volume
- 13
- Issue
- 1
- Pages
- 649-659
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2904858388
- Cited by
- 453
- References
- 70
- FWCI
- 13.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.