The DOI matches its Crossref record; 91 of the 91 references it cites were found in a registry or an index.
Review on the Aerogel-Type Oil Sorbents Derived from Nanocellulose
Abstract
Because of the severe risk of oil pollution and increasing concerns about the sustainability of sorbent materials, there are considerable interests across the world to develop cost-effective, reusable, and environmentally friendly oil sorbents derived from renewable resources. Nanocellulose is a new family of promising cellulosic materials with a cellulose fibril width in the order of nanometer range (i.e., 2–100 nm). As a class of newly developed cellulose aerogels, nanocellulose-derived ones combine intriguing interconnected three-dimensional porous characteristics of aerogel-type materials such as high porosity, large surface area, and low density with fascinating advantages related to naturally occurring nanocellulose: impressive mechanical properties, abundant sources, natural renewability, excellent biodegradability, and ease to surface modification. Therefore, nanocellulose-based aerogels are very ideal “green” oil sorbents after either appropriate hydrophobic modifications or carbonization. This present review summarizes the state-of-the-art in the aerogel-type oil sorbents derived from nanocellulose, including hydrophobized nanofibrillated cellulose (NFC)-based aerogels, hydrophobized bacterial cellulose (BC)-based ones, and the carbon ones prepared through the pyrolysis NFC or BC aerogels. Their respective preparation methods, structure, and oil-absorption performance are summarized. And the existing problems in the current research and the future development perspectives are also presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanocelluloses: A New Family of Nature‐Based Materials
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D., & Dorris, A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201001273 · Cited by 4,465
TEMPO-oxidized cellulose nanofibers
Isogai, A., Saito, T., & Fukuzumi, H. (2011) · Nanoscale · doi:10.1039/c0nr00583e · Cited by 3,179
Microfibrillated cellulose and new nanocomposite materials: a review
Siró, I., & Plackett, D. (2010) · Cellulose · doi:10.1007/s10570-010-9405-y · Cited by 2,883
Organic aerogels from the polycondensation of resorcinol with formaldehyde
Pekala, R. W. (1989) · Journal of Materials Science · doi:10.1007/bf01139044 · Cited by 1,811
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796
Nanocellulose: a new ageless bionanomaterial
Dufresne, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.06.004 · Cited by 1,685
Key advances in the chemical modification of nanocelluloses
Habibi, Y. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60204d · Cited by 1,561
Gui, X., Wei, J., Wang, K., Cao, A., Zhu, H., Jia, Y., Shu, Q., & Wu, D. (2010) · Advanced Materials · doi:10.1002/adma.200902986 · Cited by 1,528
Porous Materials for Oil Spill Cleanup: A Review of Synthesis and Absorbing Properties
Adebajo, M. O., Frost, R. L., Kloprogge, J. T., Carmody, O., & Kokot, S. (2003) · Journal of Porous Materials · doi:10.1023/a:1027484117065 · Cited by 1,045
Spongy Graphene as a Highly Efficient and Recyclable Sorbent for Oils and Organic Solvents
Bi, H., Xie, X., Yin, K., Zhou, Y., Wan, S., He, L., Xu, F., Banhart, F., Sun, L., & Ruoff, R. S. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200888 · Cited by 1,010
A Versatile, Ultralight, Nitrogen‐Doped Graphene Framework
Zhao, Y., Hu, C., Hu, Y., Cheng, H., Shi, G., & Qu, L. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201206554 · Cited by 856
Hydrophobic Nanocellulose Aerogels as Floating, Sustainable, Reusable, and Recyclable Oil Absorbents
Korhonen, J. T., Kettunen, M., Ras, R. H. A., & Ikkala, O. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200475b · Cited by 817
Nguyen, D. D., Tai, N.-H., Lee, S.-B., & Kuo, W.-S. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21848h · Cited by 800
Ultralight, Flexible, and Fire‐Resistant Carbon Nanofiber Aerogels from Bacterial Cellulose
Wu, Z., Li, C., Liang, H., Chen, J., & Yu, S. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201209676 · Cited by 769
Pääkkö, M., Vapaavuori, J., Silvennoinen, R., Kosonen, H., Ankerfors, M., Lindström, T., Berglund, L. A., & Ikkala, O. (2008) · Soft Matter · doi:10.1039/b810371b · Cited by 660
Zhang, Z., Sèbe, G., Rentsch, D., Zimmermann, T., & Tingaut, P. (2014) · Chemistry of Materials · doi:10.1021/cm5004164 · Cited by 613
Vargas, A. M. M., Cazetta, A. L., Kunita, M. H., Silva, T. L., & Almeida, V. C. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.01.067 · Cited by 585
Natural sorbents in oil spill cleanup
Choi, H. M., & Cloud, R. M. (1992) · Environmental Science & Technology · doi:10.1021/es00028a016 · Cited by 575
High-porosity aerogels of high specific surface area prepared from nanofibrillated cellulose (NFC)
Sehaqui, H., Zhou, Q., & Berglund, L. A. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.07.003 · Cited by 568
Kobayashi, Y., Saito, T., & Isogai, A. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201405123 · Cited by 566
Strong and Tough Cellulose Nanopaper with High Specific Surface Area and Porosity
Sehaqui, H., Zhou, Q., Ikkala, O., & Berglund, L. A. (2011) · Biomacromolecules · doi:10.1021/bm2008907 · Cited by 510
Experimental investigation of various vegetable fibers as sorbent materials for oil spills
Annunciado, T. R., Sydenstricker, T. H. D., & Amico, S. C. (2005) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2005.04.043 · Cited by 501
Entire Surface Oxidation of Various Cellulose Microfibrils by TEMPO-Mediated Oxidation
Okita, Y., Saito, T., & Isogai, A. (2010) · Biomacromolecules · doi:10.1021/bm100214b · Cited by 468
Advanced fabrication and oil absorption properties of super-hydrophobic recycled cellulose aerogels
Feng, J., Nguyen, S. T., Fan, Z., & Duong, H. M. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.02.034 · Cited by 462
A sustainable approach to controlling oil spills
Al-Majed, A. A., Adebayo, A. R., & Hossain, M. E. (2012) · Journal of Environmental Management · doi:10.1016/j.jenvman.2012.07.034 · Cited by 458
Surface Modification of Bacterial Cellulose Aerogels’ Web-like Skeleton for Oil/Water Separation
Sai, H., Fu, R., Xing, L., Xiang, J., Li, Z., Li, F., & Zhang, T. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00846 · Cited by 436
Amphiphilic superabsorbent cellulose nanofibril aerogels
Jiang, F., & Hsieh, Y.-L. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta00743c · Cited by 429
Oil removal from aqueous state by natural fibrous sorbent: An overview
Wahi, R., Chuah, L. A., Choong, T. S. Y., Ngaini, Z., & Nourouzi, M. M. (2013) · Separation and Purification Technology · doi:10.1016/j.seppur.2013.04.015 · Cited by 422
Nanofibrillated cellulose from TEMPO-oxidized eucalyptus fibres: Effect of the carboxyl content
Besbes, I., Alila, S., & Boufi, S. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.12.052 · Cited by 421
OSATAKE, H., & INOUÉ, T. (1988) · Archives of Histology and Cytology · doi:10.1679/aohc.51.53 · Cited by 409
Evaluation of nonwoven polypropylene oil sorbents in marine oil-spill recovery
Wei, Q. F., Mather, R. R., Fotheringham, A. F., & Yang, R. D. (2003) · Marine Pollution Bulletin · doi:10.1016/s0025-326x(03)00042-0 · Cited by 400
Cellulose–Silica Nanocomposite Aerogels by In Situ Formation of Silica in Cellulose Gel
Cai, J., Liu, S., Feng, J., Kimura, S., Wada, M., Kuga, S., & Zhang, L. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201105730 · Cited by 394
Zheng, Q., Cai, Z., & Gong, S. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta14642a · Cited by 393
Cellulose Aerogels from Aqueous Alkali Hydroxide–Urea Solution
Cai, J., Kimura, S., Wada, M., Kuga, S., & Zhang, L. (2008) · ChemSusChem · doi:10.1002/cssc.200700039 · Cited by 387
Cellulose Aerogel from Paper Waste for Crude Oil Spill Cleaning
Nguyen, S. T., Feng, J., Le, N. T., Le, A. T. T., Hoang, N., Tan, V. B. C., & Duong, H. M. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4032567 · Cited by 380
Carbon materials as oil sorbents: a review on the synthesis and performance
Gupta, S., & Tai, N.-H. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta08321d · Cited by 376
Ultra porous nanocellulose aerogels as separation medium for mixtures of oil/water liquids
Cervin, N. T., Aulin, C., Larsson, P. T., & Wågberg, L. (2012) · Cellulose · doi:10.1007/s10570-011-9629-5 · Cited by 363
Aerocellulose: New Highly Porous Cellulose Prepared from Cellulose−NaOH Aqueous Solutions
Gavillon, R., & Budtova, T. (2008) · Biomacromolecules · doi:10.1021/bm700972k · Cited by 355
Cellulose nanowhisker aerogels
Heath, L., & Thielemans, W. (2010) · Green Chemistry · doi:10.1039/c0gc00035c · Cited by 352
Nanofibrillar cellulose aerogels
Jin, H., Nishiyama, Y., Wada, M., & Kuga, S. (2004) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2004.03.007 · Cited by 350
Magnetic and Highly Recyclable Macroporous Carbon Nanotubes for Spilled Oil Sorption and Separation
Gui, X., Zeng, Z., Lin, Z., Gan, Q., Xiang, R., Zhu, Y., Cao, A., & Tang, Z. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4015007 · Cited by 337
Nanoporous polystyrene fibers for oil spill cleanup
Lin, J., Shang, Y., Ding, B., Yang, J., Yu, J., & Al-Deyab, S. S. (2012) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2011.11.002 · Cited by 310
Jin, H., Kettunen, M., Laiho, A., Pynnönen, H., Paltakari, J., Marmur, A., Ikkala, O., & Ras, R. H. A. (2011) · Langmuir · doi:10.1021/la103877r · Cited by 306
Aerogels from nanofibrillated cellulose with tunable oleophobicity
Aulin, C., Netrval, J., Wågberg, L., & Lindström, T. (2010) · Soft Matter · doi:10.1039/c001939a · Cited by 306
Recyclable carbon nanotube sponges for oil absorption
Gui, X., Li, H., Wang, K., Wei, J., Jia, Y., Li, Z., Fan, L., Cao, A., Zhu, H., & Wu, D. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.04.022 · Cited by 297
Nemoto, J., Saito, T., & Isogai, A. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b05841 · Cited by 289
Effect of kapok fiber treated with various solvents on oil absorbency
Wang, J., Zheng, Y., & Wang, A. (2012) · Industrial Crops and Products · doi:10.1016/j.indcrop.2012.03.002 · Cited by 289
Sescousse, R., Gavillon, R., & Budtova, T. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.10.043 · Cited by 284
Jiang, F., & Hsieh, Y.-L. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta13629a · Cited by 268
Kinetics of oil and oil products adsorption by carbonized rice husks
Angelova, D., Uzunov, I., Uzunova, S., Gigova, A., & Minchev, L. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.05.114 · Cited by 267
Fischer, F., Rigacci, A., Pirard, R., Berthon-Fabry, S., & Achard, P. (2006) · Polymer · doi:10.1016/j.polymer.2006.09.004 · Cited by 264
Sokker, H. H., El-Sawy, N. M., Hassan, M. A., & El-Anadouli, B. E. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.03.055 · Cited by 264
Treatment of oil–water emulsions by adsorption onto activated carbon, bentonite and deposited carbon
Okiel, K., El-Sayed, M., & El-Kady, M. Y. (2011) · Egyptian Journal of Petroleum · doi:10.1016/j.ejpe.2011.06.002 · Cited by 259
Adsorption of hydrocarbons on organo-clays—Implications for oil spill remediation
Carmody, O., Frost, R., Xi, Y., & Kokot, S. (2007) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2006.09.032 · Cited by 248
Organic Aerogels with Very High Impact Strength
Tan, C., Fung, B. M., Newman, J. K., & Vu, C. (2001) · Advanced Materials · doi:10.1002/1521-4095(200105)13:9<644::aid-adma644>3.0.co;2-# · Cited by 232
Fluorine-Free Oil Absorbents Made from Cellulose Nanofibril Aerogels
Mulyadi, A., Zhang, Z., & Deng, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10985 · Cited by 225
Wang, S., Peng, X., Zhong, L., Tan, J., Jing, S., Cao, X., Chen, W., Liu, C., & Sun, R. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta07057g · Cited by 219
Preparation of low-density carbon aerogels by ambient pressure drying
Wu, D., Fu, R., Zhang, S., Dresselhaus, M. S., & Dresselhaus, G. (2004) · Carbon · doi:10.1016/j.carbon.2004.04.003 · Cited by 215
Ultralight carbon aerogel from nanocellulose as a highly selective oil absorption material
Meng, Y., Young, T. M., Liu, P., Contescu, C. I., Huang, B., & Wang, S. (2015) · Cellulose · doi:10.1007/s10570-014-0519-5 · Cited by 214
Aerocellulose: Aerogels and Aerogel‐like Materials made from Cellulose
Innerlohinger, J., Weber, H. K., & Kraft, G. (2006) · Macromolecular Symposia · doi:10.1002/masy.200651212 · Cited by 209
The preparation of lignocellulosic aerogels from ionic liquid solutions
Aaltonen, O., & Jauhiainen, O. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2008.07.008 · Cited by 200
Xiao, S., Gao, R., Lu, Y., Li, J., & Sun, Q. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.11.041 · Cited by 195
Synthesis and characterisation of nanofibrillar cellulose aerogels
Hoepfner, S., Ratke, L., & Milow, B. (2008) · Cellulose · doi:10.1007/s10570-007-9146-8 · Cited by 191
Study of oil sorption by expanded perlite at 298.15K
Bastani, D., Safekordi, A. A., Alihosseini, A., & Taghikhani, V. (2006) · Separation and Purification Technology · doi:10.1016/j.seppur.2006.05.004 · Cited by 178
Sai, H., Xing, L., Xiang, J., Cui, L., Jiao, J., Zhao, C., Li, Z., & Li, F. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11198a · Cited by 172
Removal of emulsified food and mineral oils from wastewater using surfactant modified barley straw
Ibrahim, S., Ang, H.-M., & Wang, S. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.06.070 · Cited by 170
Tsioptsias, C., Stefopoulos, A., Kokkinomalis, I., Papadopoulou, L., & Panayiotou, C. (2008) · Green Chemistry · doi:10.1039/b803869d · Cited by 167
Ali, N., El‐Harbawi, M., Jabal, A. A., & Yin, C. (2011) · Environmental Technology · doi:10.1080/09593330.2011.579185 · Cited by 155
Governing factors for motor oil removal from water with different sorption materials
Rajakovic-Ognjanovic, V. N., Aleksic̀, G. N. , & Rajaković, L. V. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.10.066 · Cited by 152
Chen, Y., & Zhang, D. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.05.120 · Cited by 135
Self-citationSharma, P., Saikia, B. K., & Das, M. R. (2014) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2014.05.054 · Cited by 134
Coated kapok fiber for removal of spilled oil
Wang, J., Zheng, Y., & Wang, A. (2013) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2013.01.007 · Cited by 134
Use of biomass sorbents for oil removal from gas station runoff
Khan, E., Virojnagud, W., & Ratpukdi, T. (2004) · Chemosphere · doi:10.1016/j.chemosphere.2004.06.028 · Cited by 132
Recycling of waste tyre rubber into oil absorbent
Wu, B. C., & Zhou, M. H. (2008) · Waste Management · doi:10.1016/j.wasman.2008.03.002 · Cited by 124
Fu, R., Zheng, B., Liu, J., Dresselhaus, M. S., Dresselhaus, G., Satcher, J. H., & Baumann, T. F. (2003) · Advanced Functional Materials · doi:10.1002/adfm.200304289 · Cited by 123
Versatile Gas-Phase Reactions for Surface to Bulk Esterification of Cellulose Microfibrils Aerogels
Fumagalli, M., Ouhab, D., Molina-Boisseau, S., & Heux, L. (2013) · Biomacromolecules · doi:10.1021/bm400864z · Cited by 120
Treatment of oil-in-water emulsions: Performance of a sawdust bed filter
Cambiella, Á., Ortea, E., Ríos, G., Benito, J. M., Pazos, C., & Coca, J. (2005) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2005.09.023 · Cited by 119
Modified jet flotation in oil (petroleum) emulsion/water separations
Santander, M., Rodrigues, R. T., & Rubio, J. (2010) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2010.12.027 · Cited by 117
Yun, S., Luo, H., & Gao, Y. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta02195a · Cited by 108
Sai, H., Li, X., Xiang, J., Cui, L., Jiao, J., Zhao, C., Li, Z., Li, F., & Zhang, T. (2014) · RSC Advances · doi:10.1039/c4ra02752c · Cited by 106
Assembling and Redispersibility of Rice Straw Nanocellulose: Effect of tert-Butanol
Jiang, F., & Hsieh, Y. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am505626a · Cited by 102
Treatment of oily water using hydrophobic nano-silica
Syed, S., Al-Hazzaa, M. I., & Asif, M. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.12.006 · Cited by 97
Wang, Y., Yadav, S., Heinlein, T., Konjik, V., Breitzke, H., Buntkowsky, G., Schneider, J. J., & Zhang, K. (2014) · RSC Advances · doi:10.1039/c4ra02168a · Cited by 90
Microfibrillar carbon from native cellulose
Ishida, O., Kim, D.-Y., Kuga, S., Nishiyama, Y., & Brown, R. M. (2004) · Cellulose · doi:10.1023/b:cell.0000046410.31007.0b · Cited by 80
Liu, S., Yan, Q., Tao, D., Yu, T., & Liu, X. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.03.046 · Cited by 78
Aerocellulose based on all‐cellulose composites
Duchemin, B., Staiger, M. P., Tucker, N., & Newman, R. H. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.31111 · Cited by 77
Highly water repellent aerogels based on cellulose stearoyl esters
Granström, M., Pääkkö, M., Jin, H., Kolehmainen, E. T., Kilpeläinen, I., & Ikkala, O. T. (2011) · Polymer Chemistry · doi:10.1039/c0py00309c · Cited by 59
Wan, C., Lu, Y., Cao, J., Sun, Q., & Li, J. (2015) · Fibers and Polymers · doi:10.1007/s12221-015-0302-8 · Cited by 58
Requirements of organic gels for a successful ambient pressure drying preparation of carbon aerogels
Wu, D., & Fu, R. (2007) · Journal of Porous Materials · doi:10.1007/s10934-006-9048-4 · Cited by 34
Cellulose nanofiber aerogel production and applications
Nakagaito, A. N., Kondo, H., & Takagi, H. (2013) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684413494110 · Cited by 33
Tansel, B., & Sevimoğlu, O. (2005) · Water Air & Soil Pollution · doi:10.1007/s11270-006-3110-3 · Cited by 26
Cited by
Chen, Y., Zhang, L., Yang, Y., Pang, B., Xu, W., Duan, G., Jiang, S., & Zhang, K. (2021) · Advanced Materials · doi:10.1002/adma.202005569 · Cited by 721
Self-citationGuan, H., Cheng, Z., & Wang, X. (2018) · ACS Nano · doi:10.1021/acsnano.8b05763 · Cited by 666
Nanocellulose-based foams and aerogels: processing, properties, and applications
Lavoine, N., & Bergström, L. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02807e · Cited by 656
A review of bio-based materials for oil spill treatment
Doshi, B., Sillanpää, M., & Kalliola, S. (2018) · Water Research · doi:10.1016/j.watres.2018.02.034 · Cited by 652
Wood-based nanotechnologies toward sustainability
Jiang, F., Li, T., Li, Y., Zhang, Y., Gong, A., Dai, J., Hitz, E., Luo, W., & Hu, L. (2018) · Advanced Materials · doi:10.1002/adma.201703453 · Cited by 599
Metadata
- Authors
- Liu, H., Geng, B., Chen, Y., & Wang, H.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-12-05
- Volume
- 5
- Issue
- 1
- Pages
- 49-66
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2551985213
- Cited by
- 347
- References
- 91
- FWCI
- 11.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.