Activated Carbon from E-Waste Plastics as a Promising Anode for Sodium-Ion Batteries
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
There is a pressing need for the introduction of highly efficient and cost-effective energy storage systems to meet worldwide burgeoning energy demand. Key to these systems is the development of sustainable, higher capacity, electrode materials. Carbonaceous materials have demonstrated the most success as negative electrode materials for alkali-ion batteries, and the development of novel methods to produce these materials more sustainably will enable the production of next-generation alkali-ion batteries with reduced environmental impact. This study demonstrates that activated carbon derived from end-of-life printer plastics can act as high capacity anode materials for sodium-ion batteries. These carbons exhibited superior rate capability and delivered capacities as high as 190 mAh/g at 3 mA/g after 25 cycles. They were able to retain up to 100% of their second discharge capacity after 100 cycles at 20 mA/g. In-depth ex situ analysis of the electrodes, using a combination of techniques such as solid state nuclear magnetic resonance and X-ray diffraction is also presented to shed light on the sodium storage mechanism, a topic still being vigorously investigated in the scientific community. This work provides an excellent example of repurposing waste for sustainable energy storage applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
Pinson, M. B., & Bazant, M. Z. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.044302jes · Cited by 946
Synthesis of hard carbon from argan shells for Na-ion batteries
Dahbi, M., Kiso, M., Kubota, K., Horiba, T., Chafik, T., Hida, K., Matsuyama, T., & Komaba, S. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01394a · Cited by 347
Cleaner production of iron by using waste macadamia biomass as a carbon resource
Kumar, U., Maroufi, S., Rajarao, R., Mayyas, M., Mansuri, I., Joshi, R. K., & Sahajwalla, V. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.04.115 · Cited by 103
Self-citation
Cited by
Li, Y., Lu, Y., Meng, Q., Jensen, A. C. S., Zhang, Q., Zhang, Q., Tong, Y., Qi, Y., Gu, L., Titirici, M., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902852 · Cited by 643
Plastic wastes derived carbon materials for green energy and sustainable environmental applications
Chen, Z., Wei, W., Ni, B.-J., & Chen, H. (2022) · Environmental Functional Materials · doi:10.1016/j.efmat.2022.05.005 · Cited by 113
Conversion of waste plastics into value-added carbon materials
Luo, Y., Lin, X., Lichtfouse, E., Jiang, H., & Wang, C. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-023-01638-7 · Cited by 100
Bian, S., Cai, Z., Xing, W., Zhao, C., Pan, Y., Han, J., Wu, G., & Huang, Y. (2025) · Environmental Research · doi:10.1016/j.envres.2025.120785 · Cited by 30
Kaewtrakulchai, N., Chanpee, S., Jadsadajerm, S., Wongrerkdee, S., Manatura, K., & Eiad-Ua, A. (2024) · Carbon Resources Conversion · doi:10.1016/j.crcon.2024.100231 · Cited by 29
Metadata
- Authors
- Kumar, U., Goonetilleke, D., Gaikwad, V., Pramudita, J. C., Joshi, R. K., Sharma, N., & Sahajwalla, V.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-05-14
- Volume
- 7
- Issue
- 12
- Pages
- 10310-10322
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2945937621
- Cited by
- 71
- References
- 4
- FWCI
- 2.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.