Degradation Rates of Plastics in the Environment
Open accessThe DOI matches its Crossref record; 171 of the 173 references it cites were found in a registry or an index.
Abstract
Plastic waste is currently generated at a rate approaching 400 Mt year–1. The amount of plastics accumulating in the environment is growing rapidly, yet our understanding of its persistence is very limited. This Perspective summarizes the existing literature on environmental degradation rates and pathways for the major types of thermoplastic polymers. A metric to harmonize disparate types of measurements, the specific surface degradation rate (SSDR), is implemented and used to extrapolate half-lives. SSDR values cover a very wide range, with some of the variability arising due to degradation studies conducted in different natural environments. SSDRs for high density polyethylene (HDPE) in the marine environment range from practically 0 to approximately 11 μm year–1. This approach yields a number of interesting insights. Using a mean SSDR for HDPE in the marine environment, linear extrapolation leads to estimated half-lives ranging from 58 years (bottles) to 1200 years (pipes). For example, SSDRs for HDPE and polylactic acid (PLA) are surprisingly similar in the marine environment, although PLA degrades approximately 20 times faster than HDPE on land. Our study highlights the need for better experimental studies under well-defined reaction conditions, standardized reporting of rates, and methods to simulate polymer degradation using.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The attack of PE by Bacillus sp. and Vreelandella sp. (the new genus where some Halomonas species have been reclassified) was demonstrated by observing changes in the chemical (Fourier Transform InfraRed spectrometry (FTIR) and structural properties (scanning elec tron microscopy (SEM) and atomic force microscopy (ATM)) of PE recovered at the end of the incubation period (Bajo et al., 2”
From Mineralization of 13C-labeled polyethylene by marine Bacillus velezensis MT9 (2026) · cites this paper as Chamas et al., 2020
In the citing paper
“As shown in Figure 3, plastics have a lifespan ranging from years to millennia, depending on their properties and environmental conditions [31].”
From Transforming Plastic Waste into Value: A Review of Management Strategies and Innovative Applications in Sustainable Construction (2025) · cites this paper as [31]
In the citing paper
“the inert characteristics that provide plastics their useful materials properties make them resilient to degradation in the environment with an estimated lifetime of hundreds of years”
From Chemically recyclable polyolefin-like multiblock polymers (2023) · cites this paper as [3]
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Plastic waste inputs from land into the ocean
Jambeck, J. R., Geyer, R., Wilcox, C., Siegler, T. R., Perryman, M., Andrady, A., Narayan, R., & Law, K. L. (2015) · Science · doi:10.1126/science.1260352 · Cited by 13,163
Microplastics in the marine environment
Andrady, A. L. (2011) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2011.05.030 · Cited by 8,105
Accumulation and fragmentation of plastic debris in global environments
Barnes, D. K. A., Galgani, F., Thompson, R. C., & Barlaz, M. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0205 · Cited by 6,126
Microplastics as contaminants in the marine environment: A review
Cole, M., Lindeque, P., Halsband, C., & Galloway, T. S. (2011) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2011.09.025 · Cited by 6,023
Hidalgo-Ruz, V., Gutow, L., Thompson, R. C., & Thiel, M. (2012) · Environmental Science & Technology · doi:10.1021/es2031505 · Cited by 5,440
A bacterium that degrades and assimilates poly(ethylene terephthalate)
Yoshida, S., Hiraga, K., Takehana, T., Taniguchi, I., Yamaji, H., Maeda, Y., Toyohara, K., Miyamoto, K., Kimura, Y., & Oda, K. (2016) · Science · doi:10.1126/science.aad6359 · Cited by 3,367
Biological degradation of plastics: A comprehensive review
Shah, A. A., Hasan, F., Hameed, A., & Ahmed, S. (2008) · Biotechnology Advances · doi:10.1016/j.biotechadv.2007.12.005 · Cited by 2,765
The plastic in microplastics: A review
Andrady, A. L. (2017) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2017.01.082 · Cited by 2,372
The impact of debris on marine life
Gall, S. C., & Thompson, R. C. (2015) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2014.12.041 · Cited by 2,187
Research works printed but not linked: 10
- Baba, 2015, Comparative Analysis of Biodegradation on Polythene and Plastics Buried in Fadama Soil Amended with Organic and Inorganic Fertilizer, Int. J. Appl. Manage. Sci., 1, 16
- Orhan, 2004, Biodegradation of Plastic Compost Bags Under Controlled Soil Conditions, Acta Chim. Slov., 51, 579
- Kumar, 2016, Studies on Biodegradation of Plastic Packaging Materials in Soil Bioreactor, Indian J. Adv. Chem. Sci., 297
- Moore, 1998, Advances in Biodegradable Polymers
- Barbeş, 2014, ATR-FTIR Spectrometry Characterisation of Polymeric Materials, Romanian Rep. Phys., 66, 765
- Bovey, 1994, NMR of Polymers
- Schmidt-Rohr, 1996, Multidimensional Solid-State NMR and Polymers
- Weikart, 2000, Modification, Degradation, and Stability of Polymeric Surfaces Treated with Reactive Plasmas, J. Polym. Sci., Part A: Polym. Chem., 38, 3028, 10.1002/1099-0518(20000901)38:17<3028::aid-pola30>3.0.co;2-b · doi:10.1002/1099-0518(20000901)38:17<3028::aid-pola30>3.0.co;2-b
- Rutkowska, 2002, Biodegradability of Polyethylene Starch Blends in Sea Water, Polym. J. Environ. Stud., 11, 267
- Boucher, 2017, Primary Microplastics in the Oceans
Cited by
Items 901–1,000 of 1,012
Biodegradable Food Packaging Films Using a Combination of Hemicellulose and Cellulose Derivatives
Hussain, S. A., Yadav, M. P., Sharma, B. K., Qi, P. X., & Jin, T. Z. (2024) · Polymers · doi:10.3390/polym16223171 · Cited by 31
Russell, C. E., Pohl, F., & Fernández, R. (2024) · Earth-Science Reviews · doi:10.1016/j.earscirev.2024.104994 · Cited by 35
Yang, Q., Lin, Z., Gan, D., Li, M., Liu, X., Zhou, S., & Walsh, T. R. (2025) · Environment International · doi:10.1016/j.envint.2025.109261 · Cited by 31
Ru-Catalyzed Polyethylene Hydrogenolysis under Quasi-Supercritical Conditions
Kim, S., Yang, B., Gutiérrez, O. Y., Zhang, W., Lizandara‐Pueyo, C., Ingale, P., Jevtovikj, I., Grauke, R., Szanyi, J., Wang, H., et al. (2025) · JACS Au · doi:10.1021/jacsau.5c00006 · Cited by 32
Respirometry and Cell Viability Studies for Sustainable Polyesters and Their Hydrolysis Products
Reisman, L., Siehr, A., Horn, J., Batiste, D. C., Kim, H. J., Hoe, G. X. D., Ellison, C. J., Shen, W., White, E. M., & Hillmyer, M. A. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c08026 · Cited by 31
A critical view on the technology readiness level (TRL) of microbial plastics biodegradation
Sales, J. C. S., Santos, A. G., de Castro, A. M., & Coelho, M. A. Z. (2021) · World Journal of Microbiology and Biotechnology · doi:10.1007/s11274-021-03089-0 · Cited by 36
Conversion of industrial carpet waste into adsorbent materials for organic dye removal from water
Janbooranapinij, K., Yimponpipatpol, A., Ngamthanacom, N., & Panomsuwan, G. (2021) · Cleaner Engineering and Technology · doi:10.1016/j.clet.2021.100150 · Cited by 31
Guimarães, T. C., Araújo, E. S., Hernández-Macedo, M. L., & López, J. A. (2022) · Journal of Polymers and the Environment · doi:10.1007/s10924-022-02403-7 · Cited by 33
Delorme, A. E., Radusin, T., Myllytie, P., Verney, V., & Askanian, H. (2022) · Nanomaterials · doi:10.3390/nano12060978 · Cited by 32
Lett, J. A., Sagadevan, S., Weldegebrieal, G. K., & Fatimah, I. (2022) · BULLETIN OF CHEMICAL REACTION ENGINEERING AND CATALYSIS · doi:10.9767/bcrec.17.2.13680.340-349 · Cited by 31
Yu, J., Kim, P. D., Jang, Y., Kim, S., Han, J., & Min, J. (2022) · Biodegradation · doi:10.1007/s10532-022-09993-y · Cited by 31
Bio-Based Degradable Poly(ether-ester)s from Melt-Polymerization of Aromatic Ester and Ether Diols
Djouonkep, L. D. W., Tchameni, A. P., Selabi, N. B. S., Tamo, A. K., Doench, I., Cheng, Z., Gauthier, M., Xie, B., & Osorio‐Madrazo, A. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23168967 · Cited by 32
“The very versatile properties making plastics materials of choice for daily products have led to a major resource crisis linked to the exploitation of fossil fuels for the production of most common plastics [7,8].”
BackgroundEspinoza, J. L., & Dupont, C. L. (2022) · BMC Bioinformatics · doi:10.1186/s12859-022-04973-8 · Cited by 34
“Around 5–11% of annual plastic production is input into the ocean each year [103, 104] and researchers predict these plastics may last hundreds to thousands of years because of their stability and durability [105].”
BackgroundFinding of Novel Galactose Utilizing Halomonas sp. YK44 for Polyhydroxybutyrate (PHB) Production
Jung, H. J., Kim, S. H., Cho, D. H., Kim, B. C., Bhatia, S. K., Lee, J., Jeon, J.-M., Yoon, J., & Yang, Y. (2022) · Polymers · doi:10.3390/polym14245407 · Cited by 32
Eco-Friendly Approach to Making 3D-Printed Electrochemical Sensors
Shergill, R. S., Bhatia, P., Johnstone, L., & Patel, B. A. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c06200 · Cited by 31
Li, Y., Ye, Y., Yuan, H., Rihan, N., Han, M., Liu, X., Zhu, T., Zhao, Y., & Che, X. (2024) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2024.170924 · Cited by 31
Chemical upcycling of polymers
Stadler, B. M., & de Vries, J. G. (2021) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2020.0341 · Cited by 37
“To make matters worse, the degradation half-life of certain plastics in the ocean, for instance, of HDPE, is estimated to be as high as 1000 years [9].”
BackgroundThomas, J., Bouscher, R. F., Nwosu, J., & Soucek, M. D. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c03434 · Cited by 30
Electrochemical removal of PET and PE microplastics for wastewater treatment
Mais, L., Melis, N., Vacca, A., & Mascia, M. (2023) · Environmental Science Water Research & Technology · doi:10.1039/d3ew00582h · Cited by 47
Assessing microplastics contamination in unviable loggerhead sea turtle eggs
Curl, L. F., Hurst, S. A., Pomory, C. M., Lamont, M. M., & Janosik, A. M. (2023) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2023.169434 · Cited by 32
Yang, J., Li, Z., Xu, Q., Liu, W., Gao, S.-H., Qin, P., Chen, Z., & Wang, A. (2024) · Eco-Environment & Health · doi:10.1016/j.eehl.2024.01.010 · Cited by 34
“O) that are dif fi cult to depolymerize naturally [3].”
BackgroundProgress in polystyrene biodegradation by insect gut microbiota
Xu, L., Li, Z., Wang, L., Xu, Z., Zhang, S., & Zhang, Q. (2024) · World Journal of Microbiology and Biotechnology · doi:10.1007/s11274-024-03932-0 · Cited by 35
“Plastic materials are widely used due to their affordability, durability, light weight, and high stability (Chamas et al. 2020; Ali et al. 2021a, b, c), with polystyrene (PS) being one of the most common aromatic thermoplastics (Moulay 2018).”
An old polymer class revisited: Versatile, degradable, non-alternating polyketones
Čamdžić, L., Haynes, C. A., & Stache, E. E. (2024) · Chem · doi:10.1016/j.chempr.2024.03.008 · Cited by 31
Renault, D., Wiegand, C., Balzani, P., Richard, C. M. C., Haubrock, P. J., Colinet, H., Davranche, M., Pierson‐Wickmann, A., & Derocles, S. A. P. (2024) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2024.172252 · Cited by 33
Singh, J., Yadav, B. K., Schneidewind, U., & Krause, S. (2024) · Journal of Hydrology Regional Studies · doi:10.1016/j.ejrh.2024.101798 · Cited by 52
Cui, L., Liang, R., Zhang, C., Zhang, R., Wang, H., & Wang, X. (2024) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2024.176657 · Cited by 33
The interaction between plastics and microalgae affects community assembly and nutrient availability
Binda, G., Carnati, S., Costa, M., Hostyeva, V., Leu, E., Skjelbred, B., Spanu, D., Šupraha, L., Trotta, S., Vogelsang, C., et al. (2024) · Communications Earth & Environment · doi:10.1038/s43247-024-01706-y · Cited by 34
“Plastic is in fact commonly dispersed in urban settings and can host speci fi c microbial communities; then, owing to its low density and long-term persistence in the environment 29 , it can be transported in freshwater bodies favouring the dis-persaloftheseorganisms 22,26 .”
Microplastics: From Intrinsic Properties to Environmental Fate
Salehi, M., Pincus, L. N., Deng, B., & Peters, C. A. (2024) · Environmental Engineering Science · doi:10.1089/ees.2024.0232 · Cited by 34
“Plastics containing hydrolyzable covalent bonds (e.g., ester, amide, anhydride, ether, carbamide, or ester amide) may undergo hydrolytic and photodegradation, but the process is slow (Chamas et al., 2020).”
Borah, A., Lekshmy, J., Peediyakkathodi, S., & Devipriya, S. P. (2024) · Environmental Monitoring and Assessment · doi:10.1007/s10661-024-13232-7 · Cited by 32
“In cities, surfaces like concrete, steel, and asphalt, absorb and trap heat from the sun and vehicles, leading to localized warmer climates that facilitate the degradation of large plastic items on land (AzariJafari et al., 2021; Chamas et al., 2020; Vujo-vic et al., 2021).”
Luo, Y., Zheng, H., Li, X., Li, F., Tang, H., & She, X. (2025) · Acta Physico-Chimica Sinica · doi:10.1016/j.actphy.2025.100052 · Cited by 30
Chen, Y., Shu, J., Li, C., Ye, X., Li, Q. X., George, C., & Chen, J. (2025) · Environmental Science & Technology · doi:10.1021/acs.est.5c03278 · Cited by 31
Yeboaa, C., Tetteh, E. K., Chollom, M. N., & Rathilal, S. (2025) · Polymers · doi:10.3390/polym17111521 · Cited by 35
“Due to its non-biodegradable nature, plastic waste pollutes surface and underground water, harming wildlife and the ecosystem [8,57].”
InfluentialDegradation of Microplastics in the Environment
Corcoran, P. L. (2020) · Springer eBooks · doi:10.1007/978-3-030-10618-8_10-1 · Cited by 48
Iglesias, J. M. R., Edovald, T., Grew, R., Kark, T., Kideys, A. E., Peltola, T., & Volten, H. (2020) · Frontiers in Climate · doi:10.3389/fclim.2020.600998 · Cited by 30
“The total mass of plastics waste in the ocean is expected to escalate from 50 million tons (Mt) in 2015 to 150 Mt by 2025 (Chamas et al., 2020) which is enormous when compared with the total global”
BackgroundSelf-assembly in biobased nanocomposites for multifunctionality and improved performance
Olson, E., Liu, F., Blisko, J., Li, Y., Tsyrenova, A., Mort, R., Vorst, K., Curtzwiler, G. W., Yong, X., & Jiang, S. (2021) · Nanoscale Advances · doi:10.1039/d1na00391g · Cited by 31
From waste to wealth: upcycling of plastic and lignocellulosic wastes to PHAs
Abu-Thabit, N. Y., Pérez‐Rivero, C., Uwaezuoke, O. J., & Ngwuluka, N. C. (2021) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.6966 · Cited by 36
A human-centered review of life cycle assessments of bioplastics
Morris, M. I. R., & Hicks, A. (2021) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-021-02001-0 · Cited by 32
Biodegradable mulch films produced from soy-filled polymer resins
Candlen, K., Haque, M. A., Farfaras, N., Martey, S., Perez, P., Ratto, J. A., Pulis, R., Hogan, R., & Chen, W. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.103331 · Cited by 35
Hazmi, B., Rashid, U., Kawi, S., Mokhtar, W. N. A. W., Choong, T. S. Y., Moser, B. R., & Alsalme, A. (2022) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2022.05.001 · Cited by 30
In Vitro High-Throughput Toxicological Assessment of Nanoplastics
Gioria, S., Tolardo, V., Magrì, D., Fumagalli, F., Cassano, D., Athanassiou, A., & Fragouli, D. (2022) · Nanomaterials · doi:10.3390/nano12121947 · Cited by 34
“Moreover, the thermo-oxidative and photo-oxidative pathways of PC and PET in water have been demonstrated to induce the formation of products with characteristic exposure of oxidized functional end-groups on their surface [32,47].”
BackgroundPlastic-microbe interaction in the marine environment: Research methods and opportunities
Xiang, J. K. Z., Bairoliya, S., Cho, Z. T., & Cao, B. (2022) · Environment International · doi:10.1016/j.envint.2022.107716 · Cited by 31
Nagato, E. G., Noothalapati, H., Kogumasaka, C., Kakii, S., Hossain, M. S., Iwasaki, K., Takai, Y., Shimasaki, Y., Honda, M., Hayakawa, K., et al. (2023) · Environmental Pollution · doi:10.1016/j.envpol.2023.122011 · Cited by 30
Perumal, N., Sreekantan, S., Hamid, Z. A. A., Rusli, A., Bhubalan, K., & Appaturi, J. N. (2023) · Journal of Polymers and the Environment · doi:10.1007/s10924-023-02964-1 · Cited by 34
Kuo, M., Raffaelle, J. F., Waller, E. M., Varaljay, V. A., Wagner, D. N., Kelley‐Loughnane, N., & Reuel, N. F. (2023) · ACS Nano · doi:10.1021/acsnano.3c04347 · Cited by 30
Chen, Z., Erwin, B. J., & Che, L. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.138861 · Cited by 30
Shin, M., Kim, H., Kim, S., Kim, H. J., Oh, D. X., & Park, J. (2024) · Polymer Testing · doi:10.1016/j.polymertesting.2024.108357 · Cited by 30
Membrane and membrane-integrated processes for nanoplastics removal and remediation
Sutrisna, P. D., Riadi, L., Mustika, P. C. B. W., Khoiruddin, K., Boopathy, R., Wenten, I. G., & Siagian, U. W. R. (2023) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2023.110635 · Cited by 30
Pin, J., Soltani, I., Negrier, K., & Lee, P. (2023) · Polymers · doi:10.3390/polym15244714 · Cited by 29
“While macro-plastic waste has harmful effects on wildlife, micro-and nano-plastic waste is a potential environmental threat depending on particle shape, size, and polymer composition, as well as the presence of additives, often imparting long-lasting effects when ingested [2,4].”
BackgroundXu, L., Liu, C., Ren, Y., Huang, Y., Liu, Y., Feng, S., Zhong, X., Fu, D., Zhou, X., Wang, J., et al. (2024) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2024.134148 · Cited by 30
Ali, S. S., Al-Tohamy, R., Alsharbaty, M. H. M., Elsamahy, T., El-Sapagh, S., Lim, J. W., & Sun, J. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.142153 · Cited by 33
Xayachak, T., Haque, N., Lau, D., & Pramanik, B. K. (2024) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2024.176513 · Cited by 31
Goh, K. C., Kurniawan, T. A., Sarpin, N., Masrom, M. A. N., Othman, M. H. D., Anouzla, A., Aziz, F., Ali, I., Casila, J. C. C., Khan, M. I., et al. (2024) · Journal of Hazardous Materials Advances · doi:10.1016/j.hazadv.2024.100542 · Cited by 40
Microalgae for microplastic removal from water and wastewater: a review
Sousa, P. M. S., Kinney, K. A., Sousa, C. A., & Simões, M. V. (2025) · Environmental Chemistry Letters · doi:10.1007/s10311-024-01809-0 · Cited by 33
“Moreover, these plastics have a long estimated degradation time, particularly high-density polyethylene (HDPE) products, which can require up to 1200 years to biodegrade [27].”
Ragusa, A., Cristiano, L., Vinci, P. D., Familiari, G., Nottola, S. A., Macchiarelli, G., Svelato, A., Luca, C. D., Rinaldo, D., Neri, I., et al. (2025) · Frontiers in Cell and Developmental Biology · doi:10.3389/fcell.2025.1539600 · Cited by 29
Nano and microplastics: unveiling their profound impact on endocrine health
Jahedi, F., Frad, N. J. H., Khaksar, M. A., Rashidi, P., Safdari, F., & Mansouri, Z. (2025) · Toxicology Mechanisms and Methods · doi:10.1080/15376516.2025.2509745 · Cited by 35
“Improperly discarded plastic waste undergoes degradation under environmental conditions, breaking into micro-and nano-sized fragments that can disperse into the air or leach into water resources, potentially entering the human body (Chamas et al. 2020; Jahedi et al. 2025).”
Pehlivan, N., & Gedik, K. (2022) · Environmental and Experimental Botany · doi:10.1016/j.envexpbot.2022.104870 · Cited by 31
Thanh, T. V., Hào, L. T., Cho, H.-Y., Kim, H., Park, S., Lee, M., Kim, H. J., Jeon, H., Hwang, S. Y., Park, J., et al. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c01395 · Cited by 30
Soni, A., Das, P. K., Yusuf, M., Ridha, S., Kamyab, H., Alam, M. A., Masood, F., Chelliapan, S., Ubaidullah, M., Pandit, B., et al. (2023) · Chemosphere · doi:10.1016/j.chemosphere.2023.138233 · Cited by 30
Dihydroxyterephthalate—A Trojan Horse PET Counit for Facile Chemical Recycling
Lee, T., Forrester, M. J., Wang, T., Shen, L., Liu, H., Dileep, D., Kuehl, B., Li, W., Kraus, G. A., & Cochran, E. W. (2023) · Advanced Materials · doi:10.1002/adma.202210154 · Cited by 29
Atmospheric Microplastics: Perspectives on Origin, Abundances, Ecological and Health Risks
Gupta, S., Kumar, R., Rajput, A., Gorka, R., Gupta, A., Bhasin, N., Yadav, S., Verma, A., Ram, K., & Bhagat, M. (2023) · Environmental Science and Pollution Research · doi:10.1007/s11356-023-28422-y · Cited by 30
“In thermal degradation, the viscous matrix of reactants and products limit the reaction rate until glass transition, melting, and softening temperatures are attained (Chamas et al. 2020).”
BackgroundAssessment of microplastics production from waste plastics-modified asphalt pavement
Duan, Y., Wu, K., Serrat, C., Arteaga-Larios, F., Brown, H. A., DuBois, C. J., Buttlar, W. G., & Deng, B. (2023) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2023.107329 · Cited by 34
Palansooriya, K. N., Withana, P. A., Jeong, Y., Sang, M. K., Cho, Y., Hwang, G., Chang, S. X., & Ok, Y. S. (2024) · Applied Biological Chemistry · doi:10.1186/s13765-023-00851-w · Cited by 29
Zhou, R., Huang, X., Xie, Z., Ding, Z., Wei, H., & Jin, Q. (2024) · Environmental Research · doi:10.1016/j.envres.2024.118737 · Cited by 29
Ha, D. T., Tong, H. D., & Trinh, T. T. (2024) · Scientific Reports · doi:10.1038/s41598-024-69337-z · Cited by 30
Pereyra‐Camacho, M. A., & Pardo, I. (2024) · Microbial Biotechnology · doi:10.1111/1751-7915.14459 · Cited by 31
“However, these same traits become an issue when the time plastic waste persists in landfills (or worse – the environment) is tens to hundreds of times longer than their useful lifetime (Chamas et al., 2020).”
BackgroundVenegas, S., Alarcón, C., Araya, J., Gatica, M., Morı́n, V., Tarifeño-Saldivia, E., & Uribe, E. A. (2024) · International Journal of Molecular Sciences · doi:10.3390/ijms25031576 · Cited by 28
“In fact, not only does it have one of the lowest degradation rates in both marine and terrestrial environments [2] but, to date, no known enzyme can degrade this polymer [1].”
BackgroundQin, L., Li, X., Ren, G., Yuan, R., Wang, X., Hu, Z., Ye, C., Zou, Y., Ding, P., Zhang, H., et al. (2024) · ChemSusChem · doi:10.1002/cssc.202301781 · Cited by 31
Yong, T. K., Musa, M. N. S., Abdulla, R., Derman, E., Gansau, J. A., & Rajin, M. (2024) · Biocatalysis and Agricultural Biotechnology · doi:10.1016/j.bcab.2024.103181 · Cited by 28
Environmental Markers of Plastics and Microplastics
Costa, C. Q. V., Afonso, I. I., Cruz, J., Teodósio, M. A., Jockusch, S., Ramamurthy, V., Power, D. M., & Silva, J. P. D. (2024) · Environmental Science & Technology · doi:10.1021/acs.est.3c09662 · Cited by 30
McNeill, D. C., Pal, A. K., Nath, D., Rodriguez‐Uribe, A., Mohanty, A. K., Pilla, S., Gregori, S., Dick, P., & Misra, M. (2024) · Composites Part C Open Access · doi:10.1016/j.jcomc.2024.100478 · Cited by 28
Toward a Circular Bioeconomy: Designing Microbes and Polymers for Biodegradation
Mubayi, V., Ahern, C. B., Całusińska, M., & O’Malley, M. (2024) · ACS Synthetic Biology · doi:10.1021/acssynbio.4c00077 · Cited by 30
Armaković, S. J., Armaković, S., & Savanović, M. M. (2024) · Catalysts · doi:10.3390/catal14070447 · Cited by 28
“However, in this regard, polymer structures based on polylactic acid (PLA) may offer a solution compared to polymers derived from petroleum [290].”
BackgroundKumar, S., Behera, D., Kumar, A., Karthick, B., Chetan, D., & Anoop, A. (2024) · Journal of Contaminant Hydrology · doi:10.1016/j.jconhyd.2024.104411 · Cited by 31
Plastic-Degrading Microbial Consortia from a Wastewater Treatment Plant
Salini, A., Zuliani, L., Gonnelli, P. M., Orlando, M., Odoardo, A., Ragno, D., Aulitto, M., Zaccone, C., & Fusco, S. (2024) · International Journal of Molecular Sciences · doi:10.3390/ijms252312747 · Cited by 28
Mohsin, M. A., & zaid, A. A. (2025) · Polymers · doi:10.3390/polym18010029 · Cited by 30
“Biodegradable polymers represent a promising class of materials engineered to de-compose through microbial action into benign end products such as water, carbon dioxide, methane, and biomass, offering a stark contrast to the centuries-long persistence of conventional plastics [111,112].”
Menicagli, V., Balestri, E., Vallerini, F., Castelli, A., & Lardicci, C. (2020) · Environmental Pollution · doi:10.1016/j.envpol.2020.115281 · Cited by 30
Romero, J., Cruz, R. M. S., Díez-Méndez, A., & Albertos, I. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23168970 · Cited by 29
Buteler, M., Fasanella, M., Alma, A. M., Silva, L. I., Langenheim, M., & Tomba, J. P. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.161254 · Cited by 29
Wang, W., Rondon, B., Wang, Z., Wang, J., & Niu, J. (2023) · Macromolecules · doi:10.1021/acs.macromol.2c02025 · Cited by 30
Kishore, A., Aravind, S. M., & Singh, A. (2023) · Journal of Food Process Engineering · doi:10.1111/jfpe.14320 · Cited by 29
Lestari, R., Wahyuningsih, T. D., Κamiya, Y., & Kartini, I. (2023) · Diamond and Related Materials · doi:10.1016/j.diamond.2023.110271 · Cited by 28
Endara, P. M. M., Meklesh, V., Beech, J. P., Ohlsson, P., Pučetaitė, M., & Hammer, E. C. (2023) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2023.166503 · Cited by 28
UV Light Degradation of Polylactic Acid Kickstarts Enzymatic Hydrolysis
Brown, M. H., Badzinski, T. D., Pardoe, E., Ehlebracht, M., & Maurer‐Jones, M. A. (2023) · ACS Materials Au · doi:10.1021/acsmaterialsau.3c00065 · Cited by 32
Olazar, L., Saldarriaga, J. F., López, G., Santamaria, L., Amutio, M., Olazar, M., & Artetxe, M. (2023) · Fuel Processing Technology · doi:10.1016/j.fuproc.2023.108024 · Cited by 29
Estimation of soil microplastic input derived from plastic gauze using a simplified model
Mo, X., Li, H., Lian, Y., Zheng, B., Dong, J., & Lu, X. (2021) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2021.148577 · Cited by 30
Wu, Q., Lv, X., Xu, N., Xin, L., Lin, G., Chen, K., & He, M. (2023) · Carbon · doi:10.1016/j.carbon.2023.118492 · Cited by 27
Size, shape, and elemental composition as predictors of microplastic surface erosion
Abadi, Z. T. R., Abtahi, B., Fathi, M. B., Mashhadi, N., & Grossart, H. (2024) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2024.134961 · Cited by 31
Pobłocki, K., Pawlak, M., Drzeżdżon, J., & Jacewicz, D. (2024) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2024.100881 · Cited by 27
Nanoplastics (NPs): Environmental Presence, Ecological Implications, and Mitigation Approaches
Jani, V., & Wu, S. (2025) · Microplastics · doi:10.3390/microplastics4030048 · Cited by 30
“Consequently, thermoplastics are the most widely used plastic material [11].”
Microplastics and Soil Greenhouse Gas Emissions: A Critical Reflection on Meta-Analyses
Zhang, L., Wang, C., & Xie, B. (2025) · Environmental Science & Technology · doi:10.1021/acs.est.5c08835 · Cited by 27
Kelly, F. J., Wright, S., Woodward, G., & Fussell, J. C. (2025) · Frontiers in Science · doi:10.3389/fsci.2025.1636665 · Cited by 28
Heterogeneous weathering of polypropylene in the marine environment
Scott, J. W., Turner, A., Prada, A. F., & Zhao, L. (2021) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2021.152308 · Cited by 27
Sasimowski, E., Majewski, Ł., & Grochowicz, M. (2021) · Materials · doi:10.3390/ma14247580 · Cited by 31
Adetunji, C. O., Inobeme, A., Tadso, J., Olaniyan, O. T., Abimbola, O. F., Shahnawaz, M., & Anani, O. A. (2022) · Springer eBooks · doi:10.1007/978-981-16-5403-9_16 · Cited by 27
Reid, E. V., Samuelson, M. B., Blanco‐Canqui, H., Drijber, R. A., Kadoma, I., & Wortman, S. E. (2022) · Renewable Agriculture and Food Systems · doi:10.1017/s1742170522000217 · Cited by 29
Beeswax multifunctional composites with thermal-healing capability and recyclability
Brito‐Pereira, R., Ribeiro, C., Tubio, C. R., Castro, N., Costa, P. F. R., & Lanceros-Méndez, S. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.139840 · Cited by 28
Menicagli, V., Balestri, E., Fulignati, S., Galletti, A. M. R., & Lardicci, C. (2022) · Environmental Pollution · doi:10.1016/j.envpol.2022.120738 · Cited by 27
Malla, M. A., Dubey, A., Kumar, A., & Yadav, S. (2022) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2022.11.084 · Cited by 28
A general model for air gasification of heterogenous municipal solid waste
Biancini, G., Moradi, R., Cioccolanti, L., Marchetti, B., Moglie, M., & Zotto, L. D. (2023) · Energy Conversion and Management · doi:10.1016/j.enconman.2023.116749 · Cited by 30
Santini, G., Memoli, V., Vitale, E., Natale, G. D., Trifuoggi, M., Maisto, G., & Santorufo, L. (2023) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph20043106 · Cited by 27
“Recently, in order to mitigate the adverse effects of conventional MPs, biodegradable plastic mulches have been used as they degrade more rapidly than conventional PE film [8], guaranteeing comparable agricultural benefits [9].”
Background
Metadata
- Authors
- Chamas, A., Moon, H., Zheng, J., Qiu, Y., Tabassum, T., Jang, J. H., Abu-Omar, M., Scott, S. L., & Suh, S.
- Affiliations
- University of California, Santa Barbara (US)
- University of California, Santa Barbara , , , ,
- Corresponding author
- Scott, Susannah L.
- Suh, Sangwon
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-02-03
- Volume
- 8
- Issue
- 9
- Pages
- 3494-3511
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W3005332201
- Cited by
- 3,463
- References
- 173
- Citations by year
- 2026: 573 · 2025: 690 · 2024: 699 · 2023: 657 · 2022: 519 · 2021: 268 · 2020: 54
- FWCI
- 92.35
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- ACS Sustainable Chemistry & Engineering (publishedVersion, cc-by)
- eScholarship (California Digital Library) (submittedVersion)
- Funders
- Division of Graduate Education (DGE-1633764)
- Division of Chemical, Bioengineering, Environmental, and Transport Systems (CBET-1604095)
- University of California, Santa Barbara (NA)
- Environmental Protection Agency (83557907)
- Topics
- Physical Sciences › Environmental Science › Pollution › Microplastics and Plastic Pollution
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- plastic degradation, plastic waste, thermoplastics, half-life estimation, high-density polyethylene, polylactic acid, marine environment, degradation pathways
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.