Degradation Rates of Plastics in the Environment
Open accessThe DOI matches its Crossref record; 171 of the 173 references it cites were found in a registry or an index.
Abstract
Plastic waste is currently generated at a rate approaching 400 Mt year–1. The amount of plastics accumulating in the environment is growing rapidly, yet our understanding of its persistence is very limited. This Perspective summarizes the existing literature on environmental degradation rates and pathways for the major types of thermoplastic polymers. A metric to harmonize disparate types of measurements, the specific surface degradation rate (SSDR), is implemented and used to extrapolate half-lives. SSDR values cover a very wide range, with some of the variability arising due to degradation studies conducted in different natural environments. SSDRs for high density polyethylene (HDPE) in the marine environment range from practically 0 to approximately 11 μm year–1. This approach yields a number of interesting insights. Using a mean SSDR for HDPE in the marine environment, linear extrapolation leads to estimated half-lives ranging from 58 years (bottles) to 1200 years (pipes). For example, SSDRs for HDPE and polylactic acid (PLA) are surprisingly similar in the marine environment, although PLA degrades approximately 20 times faster than HDPE on land. Our study highlights the need for better experimental studies under well-defined reaction conditions, standardized reporting of rates, and methods to simulate polymer degradation using.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The attack of PE by Bacillus sp. and Vreelandella sp. (the new genus where some Halomonas species have been reclassified) was demonstrated by observing changes in the chemical (Fourier Transform InfraRed spectrometry (FTIR) and structural properties (scanning elec tron microscopy (SEM) and atomic force microscopy (ATM)) of PE recovered at the end of the incubation period (Bajo et al., 2”
From Mineralization of 13C-labeled polyethylene by marine Bacillus velezensis MT9 (2026) · cites this paper as Chamas et al., 2020
In the citing paper
“As shown in Figure 3, plastics have a lifespan ranging from years to millennia, depending on their properties and environmental conditions [31].”
From Transforming Plastic Waste into Value: A Review of Management Strategies and Innovative Applications in Sustainable Construction (2025) · cites this paper as [31]
In the citing paper
“the inert characteristics that provide plastics their useful materials properties make them resilient to degradation in the environment with an estimated lifetime of hundreds of years”
From Chemically recyclable polyolefin-like multiblock polymers (2023) · cites this paper as [3]
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Plastic waste inputs from land into the ocean
Jambeck, J. R., Geyer, R., Wilcox, C., Siegler, T. R., Perryman, M., Andrady, A., Narayan, R., & Law, K. L. (2015) · Science · doi:10.1126/science.1260352 · Cited by 13,163
Microplastics in the marine environment
Andrady, A. L. (2011) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2011.05.030 · Cited by 8,105
Accumulation and fragmentation of plastic debris in global environments
Barnes, D. K. A., Galgani, F., Thompson, R. C., & Barlaz, M. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0205 · Cited by 6,126
Microplastics as contaminants in the marine environment: A review
Cole, M., Lindeque, P., Halsband, C., & Galloway, T. S. (2011) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2011.09.025 · Cited by 6,023
Hidalgo-Ruz, V., Gutow, L., Thompson, R. C., & Thiel, M. (2012) · Environmental Science & Technology · doi:10.1021/es2031505 · Cited by 5,440
A bacterium that degrades and assimilates poly(ethylene terephthalate)
Yoshida, S., Hiraga, K., Takehana, T., Taniguchi, I., Yamaji, H., Maeda, Y., Toyohara, K., Miyamoto, K., Kimura, Y., & Oda, K. (2016) · Science · doi:10.1126/science.aad6359 · Cited by 3,367
Biological degradation of plastics: A comprehensive review
Shah, A. A., Hasan, F., Hameed, A., & Ahmed, S. (2008) · Biotechnology Advances · doi:10.1016/j.biotechadv.2007.12.005 · Cited by 2,765
The plastic in microplastics: A review
Andrady, A. L. (2017) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2017.01.082 · Cited by 2,372
The impact of debris on marine life
Gall, S. C., & Thompson, R. C. (2015) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2014.12.041 · Cited by 2,187
Research works printed but not linked: 10
- Baba, 2015, Comparative Analysis of Biodegradation on Polythene and Plastics Buried in Fadama Soil Amended with Organic and Inorganic Fertilizer, Int. J. Appl. Manage. Sci., 1, 16
- Orhan, 2004, Biodegradation of Plastic Compost Bags Under Controlled Soil Conditions, Acta Chim. Slov., 51, 579
- Kumar, 2016, Studies on Biodegradation of Plastic Packaging Materials in Soil Bioreactor, Indian J. Adv. Chem. Sci., 297
- Moore, 1998, Advances in Biodegradable Polymers
- Barbeş, 2014, ATR-FTIR Spectrometry Characterisation of Polymeric Materials, Romanian Rep. Phys., 66, 765
- Bovey, 1994, NMR of Polymers
- Schmidt-Rohr, 1996, Multidimensional Solid-State NMR and Polymers
- Weikart, 2000, Modification, Degradation, and Stability of Polymeric Surfaces Treated with Reactive Plasmas, J. Polym. Sci., Part A: Polym. Chem., 38, 3028, 10.1002/1099-0518(20000901)38:17<3028::aid-pola30>3.0.co;2-b · doi:10.1002/1099-0518(20000901)38:17<3028::aid-pola30>3.0.co;2-b
- Rutkowska, 2002, Biodegradability of Polyethylene Starch Blends in Sea Water, Polym. J. Environ. Stud., 11, 267
- Boucher, 2017, Primary Microplastics in the Oceans
Cited by
Items 401–500 of 1,012
Romera‐Castillo, C., Mallenco‐Fornies, R., Saá-Yánez, L. M., & Álvarez-Salgado, X. A. (2022) · Marine Environmental Research · doi:10.1016/j.marenvres.2022.105607 · Cited by 73
Recent advances in the breakdown of microplastics: strategies and future prospectives
Lv, M., Jiang, B., Xing, Y., Ya, H., Zhang, T., & Wang, X. (2022) · Environmental Science and Pollution Research · doi:10.1007/s11356-022-22004-0 · Cited by 75
Rose, P. K., Jain, M., Kataria, N., Sahoo, P. K., Garg, V. K., & Yadav, A. (2023) · Groundwater for Sustainable Development · doi:10.1016/j.gsd.2022.100889 · Cited by 80
Cao, X., Liang, Y., Jiang, J., Mo, A., & He, D. (2023) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2023.117212 · Cited by 76
Recent advances in recycling and upcycling of hazardous plastic waste: A review
Anuar, S. Z. K., Nordin, A. H., Husna, S. M. N., Yusoff, A. H., Paiman, S. H., Noor, S. F. M., Nordin, M. L., Ali, S. N., & Ismail, Y. M. N. S. (2025) · Journal of Environmental Management · doi:10.1016/j.jenvman.2025.124867 · Cited by 90
Chitaka, T. Y., Russo, V., & von Blottnitz, H. (2020) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-020-01786-w · Cited by 75
“An analysis of polymer surface degradation rates by Chamas et al. (2020) found similar average rates between PLA and PP of less than 10 μm/year.”
BackgroundInfluentialReductive Depolymerization of Plastic Waste Catalyzed by Zn(OAc) 2 ⋅ 2H 2 O
Fernandes, A. C. (2021) · ChemSusChem · doi:10.1002/cssc.202100130 · Cited by 76
Face Masks - Protecting the Wearer But Neglecting the Aquatic Environment?
Hasan, N. A., Heal, R., Bashar, A., & Haque, M. M. (2020) · Environmental Challenges · doi:10.1016/j.envc.2021.100126 · Cited by 77
Nazrin, A., Sapuan, S. M., Zuhri, M. Y. M., Tawakkal, I. S. M. A., & Ilyas, R. A. (2021) · Nanotechnology Reviews · doi:10.1515/ntrev-2021-0033 · Cited by 72
“In natural environment, the degradation periods for plastic bags are 10–20 years or 500–1,000 years while plastic bottles are reported up to 70–450 years [9].”
BackgroundUogintė, I., Pleskytė, S., Pauraitė, J., & Lujanienė, G. (2022) · Environmental Monitoring and Assessment · doi:10.1007/s10661-022-10478-x · Cited by 77
“Only 18% of plastic waste is recycled, 24% is incinerated, and the remaining 58% ends up in the natural environment (Chamas et al., 2020).”
Background3D Printing of Green and Renewable Polymeric Materials: Toward Greener Additive Manufacturing
Guggenbiller, G., Brooks, S. L., King, O., Constant, E., Merckle, D., & Weems, A. C. (2023) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c02171 · Cited by 73
Hazardous state lifetimes of biodegradable plastics in natural environments
Colwell, J. M., Pratt, S., Lant, P. A., & Laycock, B. G. (2023) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2023.165025 · Cited by 76
Tapping into fungal potential: Biodegradation of plastic and rubber by potent Fungi
Ibrahim, S. S., Ionescu, D., & Grossart, H. (2024) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2024.173188 · Cited by 79
Microbial plastic degradation: enzymes, pathways, challenges, and perspectives
Pérez-García, P., Saß, K., Wongwattanarat, S., Amann, J., Feuerriegel, G., Neumann, T., Bäse, N., Schmitz, L. S., Dierkes, R. F., Gurschke, M., et al. (2025) · Microbiology and Molecular Biology Reviews · doi:10.1128/mmbr.00087-24 · Cited by 85
Microplastics as novel sedimentary particles in coastal wetlands: A review
Paduani, M. (2020) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2020.111739 · Cited by 74
Yao, S., Cao, H., Arp, H. P. H., Li, J., Bian, Y., Xie, Z., Cherubini, F., Jiang, X., & Song, Y. (2021) · Environmental Pollution · doi:10.1016/j.envpol.2021.117393 · Cited by 77
Formulating bioplastic composites for biodegradability, recycling, and performance: A Review
Hubbe, M. A., Lavoine, N., Lucia, L. A., & Dou, C. (2020) · BioResources · doi:10.15376/biores.16.1.hubbe · Cited by 85
Hernandez, L. M., Grant, J., Fard, P. S., Farner, J. M., & Tufenkji, N. (2023) · Journal of Hazardous Materials Letters · doi:10.1016/j.hazl.2023.100078 · Cited by 82
Photodegradation of microplastics mediated by different types of soil: The effect of soil components
Ding, L., Ouyang, Z., Liu, P., Wang, T., Jia, H., & Guo, X. (2021) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2021.149840 · Cited by 73
Chaudhry, A. K., & Sachdeva, P. (2021) · Regional Studies in Marine Science · doi:10.1016/j.rsma.2021.102018 · Cited by 77
Guleria, S., Singh, H., Sharma, V., Bhardwaj, N., Arya, S. K., Puri, S., & Khatri, M. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.130661 · Cited by 71
Estimating global marine surface microplastic abundance: systematic literature review
Bohdan, K. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.155064 · Cited by 70
Innovations Toward the Valorization of Plastics Waste
Hinton, Z. R., Talley, M. R., Kots, P. A., Le, A. V., Zhang, T., Mackay, M. E., Kunjapur, A. M., Bai, P., Vlachos, D. G., Watson, M. P., et al. (2022) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-081320-032344 · Cited by 76
Environmental Impact of Polymer Fiber Manufacture
Amarakoon, M., Alenezi, H., Homer‐Vanniasinkam, S., & Edirisinghe, M. J. (2022) · Macromolecular Materials and Engineering · doi:10.1002/mame.202200356 · Cited by 70
Revolutionizing tropical fruits preservation: Emerging edible coating technologies
Olunusi, S. O., Ramli, N. H., Adam, F., Ismail, A. F., & Okwuwa, C. C. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.130682 · Cited by 76
Mechanically triggered on-demand degradation of polymers synthesized by radical polymerizations
Liu, P., Jimaja, S., Immel, S., Thomas, C., Mayer, M., Weder, C., & Bruns, N. (2024) · Nature Chemistry · doi:10.1038/s41557-024-01508-x · Cited by 78
“While high stability is an attractive feature for the service life of plastic products, it is also a key reason for their accumulation in the environment 4,5 .”
BackgroundMicro- and nano- plastic degradation by bacterial enzymes: A solution to 'White Pollution'
Mandal, M., Roy, A., Popek, R., & Sarkar, A. (2024) · The Microbe · doi:10.1016/j.microb.2024.100072 · Cited by 76
Electrospinning of sustainable polymers from biomass for active food packaging
Topuz, F., & Uyar, T. (2024) · Sustainable Food Technology · doi:10.1039/d4fb00147h · Cited by 75
Moshkbid, E., Cree, D. E., Bradford, L., & Zhang, W. (2024) · Journal of Composites Science · doi:10.3390/jcs8090342 · Cited by 80
Purahong, W., Wahdan, S. F. M., Heinz, D., Jariyavidyanont, K., Sungkapreecha, C., Tanunchai, B., Sansupa, C., Sadubsarn, D., Alaneed, R., Heintz‐Buschart, A., et al. (2021) · Environmental Science & Technology · doi:10.1021/acs.est.1c02695 · Cited by 73
Enhanced degradation and gas barrier of PBAT through composition design of aliphatic units
Hu, H., Tian, Y., Wang, J., Zhang, R., & Zhu, J. (2021) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2021.109795 · Cited by 73
Microplastic effects on soil system parameters: a meta-analysis study
Li, H., Liu, L., Xu, Y., & Zhang, J. (2022) · Environmental Science and Pollution Research · doi:10.1007/s11356-021-18034-9 · Cited by 76
Baxter, L., Lucas, Z. N., & Walker, T. R. (2022) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2022.113460 · Cited by 69
Tamayo-Belda, M., Pulido‐Reyes, G., González-Pleiter, M., Martín-Betancor, K., Leganés, F., Rosal, R., & Fernández‐Piñas, F. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.134966 · Cited by 73
Mehmood, T., Mustafa, B., Mackenzie, K., Ali, W., Sabir, R. I., Anum, W., Gaurav, G. K., Riaz, U., Liu, X., & Peng, L. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.137704 · Cited by 75
New insights into urethane alcoholysis enable chemical full recycling of blended fabric waste
Xu, W., Chen, L., Zhang, S., Du, R., Liu, X., Xu, S., & Wang, Y. (2022) · Green Chemistry · doi:10.1039/d2gc03663k · Cited by 70
Deng, B., Yu, Y., Yang, J., Yang, M., Xing, Q., Peng, H., Wang, F., Li, M., Ma, L., & Zhai, C. (2023) · Communications Biology · doi:10.1038/s42003-023-04413-0 · Cited by 69
Computational design of metallohydrolases
Kim, D., Woodbury, S. M., Ahern, W., Tischer, D., Kang, A., Joyce, E., Bera, A. K., Hanikel, N., Salike, S., Krishna, R., et al. (2025) · Nature · doi:10.1038/s41586-025-09746-w · Cited by 99
“Engineering new metallohydrolases is currently of considerable interest for degrading human-generated environmental pollutants, for which there has not been sufficient time for efficient hydrolytic enzymes to evolve 19–21 .”
Haba, B., Djellali, S., Abdelouahed, Y., Boudjelida, S., Faleschini, F., & Carraro, M. (2025) · Polymers · doi:10.3390/polym17070881 · Cited by 68
Zvekic, M., Richards, L. C., Tong, C. C., & Krogh, E. T. (2021) · Environmental Science Processes & Impacts · doi:10.1039/d1em00392e · Cited by 81
Toward Microbial Recycling and Upcycling of Plastics: Prospects and Challenges
Verschoor, J.-A., Kusumawardhani, H., Ram, A. F. J., & de Winde, J. H. (2022) · Frontiers in Microbiology · doi:10.3389/fmicb.2022.821629 · Cited by 69
Reay, M. K., Greenfield, L. M., Graf, M., Lloyd, C. E. M., Evershed, R. P., Chadwick, D. R., & Jones, D. L. (2023) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2023.130825 · Cited by 69
Leveraging the bioeconomy for carbon drawdown
Dees, J., Sagues, W. J., Woods, E., Goldstein, H. M., Simon, A. J., & Sanchez, D. L. (2023) · Green Chemistry · doi:10.1039/d2gc02483g · Cited by 72
Junaid, M., Abbas, Z., Siddiqui, J. A., Liu, S., Tabraiz, S., Yue, Q., & Wang, J. (2023) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2023.117133 · Cited by 68
Role of water shear force for microplastics fragmentation into nanoplastics
Monira, S., Roychand, R., Bhuiyan, M. A., & Pramanik, B. K. (2023) · Environmental Research · doi:10.1016/j.envres.2023.116916 · Cited by 70
Ranking the accelerated weathering of plastic polymers
Hoseini, M., Stead, J., & Bond, T. (2023) · Environmental Science Processes & Impacts · doi:10.1039/d3em00295k · Cited by 87
Haleem, N., Kumar, P., Zhang, C. H., Jamal, Y., Hua, G., Yao, B., & Yang, X. (2023) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2023.169594 · Cited by 73
Yang, S.-S., Wu, W., Bertocchini, F., Benbow, M. E., Devipriya, S. P., Chi, H. J., Peng, B.-Y., Ding, M.-Q., He, L., Li, M.-X., et al. (2024) · Frontiers of Environmental Science & Engineering · doi:10.1007/s11783-024-1838-x · Cited by 73
Advanced Optical Imaging Technologies for Microplastics Identification: Progress and Challenges
Zhu, Y., Li, Y., Huang, J., Zhang, Y., Ho, Y., Fang, J. K., & Lam, E. Y. M. (2024) · Advanced Photonics Research · doi:10.1002/adpr.202400038 · Cited by 74
Hossain, M. U., Ng, S. T., Dong, Y., & Amor, B. (2021) · Waste Management · doi:10.1016/j.wasman.2021.06.030 · Cited by 69
Khairudin, K., Bakar, N. F. A., & Osman, M. S. (2022) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2022.108275 · Cited by 69
Groh, K. J., Arp, H. P. H., MacLeod, M., & Wang, Z. (2022) · Environmental Science Processes & Impacts · doi:10.1039/d2em00386d · Cited by 69
Pěnčík, O., Durdakova, M., Molnárová, K., Kucsera, A., Klofáč, D., Koláčková, M., Adam, V., & Húska, D. (2023) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2023.131476 · Cited by 69
Klose, L., Meyer-Heydecke, N., Wongwattanarat, S., Chow, J., Pérez-García, P., Carré, C., Streit, W. R., Antranikian, G., Romero, A. M., & Liese, A. (2023) · Polymers · doi:10.3390/polym15122653 · Cited by 71
Das, A. P., Mohanty, A. K., van Hullebusch, E. D., & de Figueiredo, G. M. (2023) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2023.115297 · Cited by 69
Microbial abilities to degrade global environmental plastic polymer waste are overstated
Lear, G., Maday, S. D. M., Gambarini, V, Northcott, G., Abbel, R., Kingsbury, J. M., Weaver, L., Wallbank, J. A., & Pantos, O. (2022) · Environmental Research Letters · doi:10.1088/1748-9326/ac59a7 · Cited by 63
Understanding challenges associated with plastic and bacterial approach toward plastic degradation
Sharma, H., & Neelam, D. K. (2022) · Journal of Basic Microbiology · doi:10.1002/jobm.202200428 · Cited by 74
Unveiling the impacts of microplastics on cadmium transfer in the soil-plant-human system: A review
Huang, F., Chen, L., Yang, X. Y., Jeyakumar, P., Wang, Z., Sun, S., Qiu, T., Zeng, Y., Chen, J., Huang, M., et al. (2024) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2024.135221 · Cited by 69
Particle and volatile organic compound emissions from a 3D printer filament extruder
Byrley, P., Wallace, M. A. G., Boyes, W. K., & Rogers, K. R. (2020) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2020.139604 · Cited by 66
“Typically, when degradation of a polymer occurs, mass loss is proportional to the surface area (Chamas et al., 2020).”
BackgroundMetabolic Cascade for Remediation of Plastic Waste: a Case Study on Microplastic Degradation
Gaur, V. K., Gupta, S., Sharma, P., Gupta, P., Varjani, S., Srivastava, J. K., Chang, J., & Bui, X. (2022) · Current Pollution Reports · doi:10.1007/s40726-021-00210-7 · Cited by 66
“The half-life of high-density polyethylene and PP is in the range of 95–460 and 190 years in land, whereas it was 23 to > 2500 and 53 years in marine ecosystem respectively [6].”
BackgroundClosing the Sustainable Life Cycle Loop of Membrane Technology via a Cellulose Biomass Platform
Thi, H. Y. N., Kim, S., Nguyen, B. T. D., Lim, D.-S., Kumar, S., Lee, H., Székely, G., & Kim, J. F. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c08554 · Cited by 65
Giangeri, G., Morlino, M. S., Bernardini, N., Ji, M., Bosaro, M., Pirillo, V., Antoniali, P., Molla, G., Raga, R., Treu, L., et al. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.157017 · Cited by 67
Role of Microplastics in Global Warming and Climate Change: A Review
Parvez, M. S., Ullah, H., Faruk, O., Simon, E., & Czédli, H. M. (2024) · Water Air & Soil Pollution · doi:10.1007/s11270-024-07003-w · Cited by 69
“Traditionally, plastics are made from fossil fuels such as natural oil and gas (Chamas et al., 2020; Geyer et al., 2017; Hamilton et al., 2019; Mulder, 1998).”
Lalonde, J. N., Pilania, G., & Marrone, B. L. (2024) · Polymer Chemistry · doi:10.1039/d4py00623b · Cited by 70
Searching Nanoplastics: From Sampling to Sample Processing
Cerasa, M., Teodori, S., & Pietrelli, L. (2021) · Polymers · doi:10.3390/polym13213658 · Cited by 66
“Once in the environment, depending on the exposure to solar radiation, mechanical forces or interactions with organisms, plastics can slowly degrade [5,6], therefore fragmentation into smaller particles commonly known as microplastics (MPs) and nanoplastics (NPs) can take place.”
BackgroundSustainable production inventory model with greening degree and dual determinants of defective items
Gautam, P., Maheshwari, S., & Jaggi, C. K. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.132879 · Cited by 64
Gao, Z., Cizdziel, J. V., Wontor, K., & Olubusoye, B. S. (2023) · Environmental Pollution · doi:10.1016/j.envpol.2023.122621 · Cited by 66
Kaing, V., Guo, Z., Sok, T., Kodikara, D., Breider, F., & Yoshimura, C. (2023) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2023.168539 · Cited by 67
Degradable π-Conjugated Polymers
Uva, A., Michailovich, S., Hsu, N. S. Y., & Tran, H. (2024) · Journal of the American Chemical Society · doi:10.1021/jacs.4c03194 · Cited by 64
Recent advances in polyolefinic plastic pyrolysis to produce fuels and chemicals
Dai, L., Lata, S., Cobb, K., Zou, R., Lei, H., Chen, P. L., & Ruan, R. R. (2024) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2024.106551 · Cited by 69
Jang, M., Yang, H., Park, S., Sung, H. K., Koo, J. M., Hwang, S. Y., Jeon, H., Oh, D. X., & Park, J. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.134946 · Cited by 65
Uogintė, I., Pleskytė, S., Skapas, M., Stanionytė, S., & Lujanienė, G. (2022) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-022-04657-z · Cited by 67
Comprehensive understanding of the aging and biodegradation of polystyrene-based plastics
Dong, D., Guo, Z. H., Yang, X., & Dai, Y. (2023) · Environmental Pollution · doi:10.1016/j.envpol.2023.123034 · Cited by 66
Savino, I., Campanale, C., Trotti, P., Massarelli, C., Corriero, G., & Uricchio, V. F. (2022) · Polymers · doi:10.3390/polym14101958 · Cited by 67
Sonke, J. E., Koenig, A. M., Yakovenko, N., Hagelskjær, O., Margenat, H., Hansson, S. V., Vleeschouwer, F. D., Magand, O., Roux, G. L., & Thomas, J. L. (2022) · Microplastics and Nanoplastics · doi:10.1186/s43591-022-00048-w · Cited by 67
“[33] that more robust degradation observations are needed, and we suggest that a follow-up box model that incorporates variable polymer types would be a more appropriate occasion.”
BackgroundJayan, N., Skariyachan, S., & Sebastian, D. (2023) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2023.131623 · Cited by 65
He, L., Yang, S.-S., Ding, J., He, Z., Pang, J.-W., Xing, D., Zhao, L., Zheng, H., Ren, N., & Wu, W. (2023) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2023.131759 · Cited by 64
Borkar, S. S., Helmer, R., Panicker, S., & Shetty, M. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c02202 · Cited by 64
Organocatalytic Aerobic Oxidative Degradation of Polystyrene to Aromatic Acids
Ong, A., Teo, J. Y. Q., Feng, Z., Tan, T. T. Y., & Lim, J. Y. C. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c01387 · Cited by 65
Sustainable recycling of polymers: a comprehensive review
Kolluru, S., Thakur, A., Tamakuwala, D., Kumar, V. V., Ramakrishna, S., & Sharan Chandran, M. (2024) · Polymer Bulletin · doi:10.1007/s00289-024-05195-z · Cited by 76
“As most thermoplastics are non-biodegradable, the degradation of thermoplastic becomes a very difficult task as degradation of this type of polymer takes several years, so there are several methods used by industries to increase the rate of degradation [67].”
Almeida, C. S., Neto, F. S., Sousa, P. D. S., Aires, F. I. D. S., Filho, J. R. D. M., Cavalcante, A. L. G., de Sousa, P. G., Melo, R. L. F., & dos Santos, J. C. S. (2024) · ACS Omega · doi:10.1021/acsomega.4c07088 · Cited by 64
Weber, C. J., Weihrauch, C., Opp, C., & Chifflard, P. (2020) · Land Degradation and Development · doi:10.1002/ldr.3676 · Cited by 66
“Especially, since they are preserved for a long time in various environmental media (Chamas et al., 2020).”
BackgroundDe, D., Sai, M. S. N., Aniya, V., & Satyavathi, B. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.125184 · Cited by 64
Katsumi, N., Kusube, T., Nagao, S., & Okochi, H. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.130574 · Cited by 62
Polyolefins and Polyethylene Terephthalate Package Wastes: Recycling and Use in Composites
Jones, H., Saffar, F., Koutsos, V., & Ray, D. (2021) · Energies · doi:10.3390/en14217306 · Cited by 68
Sturm, M., Schuhen, K., & Horn, H. (2021) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2021.151388 · Cited by 64
Liro, M., Mikuś, P., & Wyżga, B. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.156354 · Cited by 61
Synthetic (bio)degradable polymers – when does recycling fail?
Agostinho, B., Silvestre, A. J. D., Coutinho, J. A. P., & Sousa, A. F. (2023) · Green Chemistry · doi:10.1039/d2gc02726g · Cited by 65
Characterization of fiber fragments released from polyester textiles during UV weathering
Pinlova, B., & Nowack, B. (2023) · Environmental Pollution · doi:10.1016/j.envpol.2023.121012 · Cited by 59
A practical primer for image-based particle measurements in microplastic research
Schnepf, U., von Moers-Meßmer, M. A. L., & Brümmer, F. (2023) · Microplastics and Nanoplastics · doi:10.1186/s43591-023-00064-4 · Cited by 69
“Even with an immediate halt of plastic littering, it is suspected that the toxicological effects could become even greater, because the high persistence of plastics has created a global plastic toxicity debt [20–22].”
Starch biopolymer films containing chitosan nanoparticles: A review
Othman, S. H., Shapi’i, R. A., & Ronzi, N. D. A. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.121735 · Cited by 65
Accelerated Aging Effect on Mechanical Properties of Common 3D-Printing Polymers
Amza, C. G., Zapciu, A., Baciu, F., Vasile, M. I., & Nicoară, A. I. (2021) · Polymers · doi:10.3390/polym13234132 · Cited by 60
Sugar-Based Polymers with Stereochemistry-Dependent Degradability and Mechanical Properties
Stubbs, C. J., Worch, J. C., Prydderch, H., Wang, Z., Mathers, R. T., Dobrynin, A. V., Becker, M. L., & Dove, A. P. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.1c10278 · Cited by 61
Dong, Y., Wang, J., Yang, Y., Wang, Q., Zhang, X., Hu, H., & Zhu, J. (2022) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2022.110010 · Cited by 63
Societal acceptance of hydrogen for domestic and export applications in Australia
Lozano, L., Bharadwaj, B., de Sales, A., Kambo, A., & Ashworth, P. (2022) · International journal of hydrogen energy · doi:10.1016/j.ijhydene.2022.06.209 · Cited by 51
On the Use of Polymer-Based Composites for the Creation of Optical Sensors: A Review
Melnikov, P. V., Bobrov, A. V., & Marfin, Y. S. (2022) · Polymers · doi:10.3390/polym14204448 · Cited by 60
“Another important advantage of polymer-based sensors is the ability to tune their physical/chemical properties so that their resistance to degradation, biodegradability and flexibility can be modified [1,18].”
BackgroundMicroplastic pollution and its implicated risks in the estuarine environment of Tamil Nadu, India
Jeyasanta, K. I., Laju, R. L., Patterson, J., Jayanthi, M., Bilgi, D. S., Sathish, N., & Edward, J. K. P. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.160572 · Cited by 64
Cohen, N., & Radian, A. (2022) · Environmental Science & Technology · doi:10.1021/acs.est.2c05026 · Cited by 60
Zhang, J., Hirschberg, V., & Rodrigue, D. (2022) · Recycling · doi:10.3390/recycling8010002 · Cited by 61
Ali, Z., Abdullah, M., Yasin, M. T., Amanat, K., Ahmad, K., Ahmed, I., Qaisrani, M. M., & Khan, J. (2023) · Environmental Research · doi:10.1016/j.envres.2023.117949 · Cited by 69
Metadata
- Authors
- Chamas, A., Moon, H., Zheng, J., Qiu, Y., Tabassum, T., Jang, J. H., Abu-Omar, M., Scott, S. L., & Suh, S.
- Affiliations
- University of California, Santa Barbara (US)
- University of California, Santa Barbara , , , ,
- Corresponding author
- Scott, Susannah L.
- Suh, Sangwon
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-02-03
- Volume
- 8
- Issue
- 9
- Pages
- 3494-3511
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W3005332201
- Cited by
- 3,463
- References
- 173
- Citations by year
- 2026: 573 · 2025: 690 · 2024: 699 · 2023: 657 · 2022: 519 · 2021: 268 · 2020: 54
- FWCI
- 92.35
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- ACS Sustainable Chemistry & Engineering (publishedVersion, cc-by)
- eScholarship (California Digital Library) (submittedVersion)
- Funders
- Division of Graduate Education (DGE-1633764)
- Division of Chemical, Bioengineering, Environmental, and Transport Systems (CBET-1604095)
- University of California, Santa Barbara (NA)
- Environmental Protection Agency (83557907)
- Topics
- Physical Sciences › Environmental Science › Pollution › Microplastics and Plastic Pollution
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- plastic degradation, plastic waste, thermoplastics, half-life estimation, high-density polyethylene, polylactic acid, marine environment, degradation pathways
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.