Degradation Rates of Plastics in the Environment
Open accessThe DOI matches its Crossref record; 171 of the 173 references it cites were found in a registry or an index.
Abstract
Plastic waste is currently generated at a rate approaching 400 Mt year–1. The amount of plastics accumulating in the environment is growing rapidly, yet our understanding of its persistence is very limited. This Perspective summarizes the existing literature on environmental degradation rates and pathways for the major types of thermoplastic polymers. A metric to harmonize disparate types of measurements, the specific surface degradation rate (SSDR), is implemented and used to extrapolate half-lives. SSDR values cover a very wide range, with some of the variability arising due to degradation studies conducted in different natural environments. SSDRs for high density polyethylene (HDPE) in the marine environment range from practically 0 to approximately 11 μm year–1. This approach yields a number of interesting insights. Using a mean SSDR for HDPE in the marine environment, linear extrapolation leads to estimated half-lives ranging from 58 years (bottles) to 1200 years (pipes). For example, SSDRs for HDPE and polylactic acid (PLA) are surprisingly similar in the marine environment, although PLA degrades approximately 20 times faster than HDPE on land. Our study highlights the need for better experimental studies under well-defined reaction conditions, standardized reporting of rates, and methods to simulate polymer degradation using.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The attack of PE by Bacillus sp. and Vreelandella sp. (the new genus where some Halomonas species have been reclassified) was demonstrated by observing changes in the chemical (Fourier Transform InfraRed spectrometry (FTIR) and structural properties (scanning elec tron microscopy (SEM) and atomic force microscopy (ATM)) of PE recovered at the end of the incubation period (Bajo et al., 2”
From Mineralization of 13C-labeled polyethylene by marine Bacillus velezensis MT9 (2026) · cites this paper as Chamas et al., 2020
In the citing paper
“As shown in Figure 3, plastics have a lifespan ranging from years to millennia, depending on their properties and environmental conditions [31].”
From Transforming Plastic Waste into Value: A Review of Management Strategies and Innovative Applications in Sustainable Construction (2025) · cites this paper as [31]
In the citing paper
“the inert characteristics that provide plastics their useful materials properties make them resilient to degradation in the environment with an estimated lifetime of hundreds of years”
From Chemically recyclable polyolefin-like multiblock polymers (2023) · cites this paper as [3]
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Plastic waste inputs from land into the ocean
Jambeck, J. R., Geyer, R., Wilcox, C., Siegler, T. R., Perryman, M., Andrady, A., Narayan, R., & Law, K. L. (2015) · Science · doi:10.1126/science.1260352 · Cited by 13,163
Microplastics in the marine environment
Andrady, A. L. (2011) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2011.05.030 · Cited by 8,105
Accumulation and fragmentation of plastic debris in global environments
Barnes, D. K. A., Galgani, F., Thompson, R. C., & Barlaz, M. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0205 · Cited by 6,126
Microplastics as contaminants in the marine environment: A review
Cole, M., Lindeque, P., Halsband, C., & Galloway, T. S. (2011) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2011.09.025 · Cited by 6,023
Hidalgo-Ruz, V., Gutow, L., Thompson, R. C., & Thiel, M. (2012) · Environmental Science & Technology · doi:10.1021/es2031505 · Cited by 5,440
A bacterium that degrades and assimilates poly(ethylene terephthalate)
Yoshida, S., Hiraga, K., Takehana, T., Taniguchi, I., Yamaji, H., Maeda, Y., Toyohara, K., Miyamoto, K., Kimura, Y., & Oda, K. (2016) · Science · doi:10.1126/science.aad6359 · Cited by 3,367
Biological degradation of plastics: A comprehensive review
Shah, A. A., Hasan, F., Hameed, A., & Ahmed, S. (2008) · Biotechnology Advances · doi:10.1016/j.biotechadv.2007.12.005 · Cited by 2,765
The plastic in microplastics: A review
Andrady, A. L. (2017) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2017.01.082 · Cited by 2,372
The impact of debris on marine life
Gall, S. C., & Thompson, R. C. (2015) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2014.12.041 · Cited by 2,187
Research works printed but not linked: 10
- Baba, 2015, Comparative Analysis of Biodegradation on Polythene and Plastics Buried in Fadama Soil Amended with Organic and Inorganic Fertilizer, Int. J. Appl. Manage. Sci., 1, 16
- Orhan, 2004, Biodegradation of Plastic Compost Bags Under Controlled Soil Conditions, Acta Chim. Slov., 51, 579
- Kumar, 2016, Studies on Biodegradation of Plastic Packaging Materials in Soil Bioreactor, Indian J. Adv. Chem. Sci., 297
- Moore, 1998, Advances in Biodegradable Polymers
- Barbeş, 2014, ATR-FTIR Spectrometry Characterisation of Polymeric Materials, Romanian Rep. Phys., 66, 765
- Bovey, 1994, NMR of Polymers
- Schmidt-Rohr, 1996, Multidimensional Solid-State NMR and Polymers
- Weikart, 2000, Modification, Degradation, and Stability of Polymeric Surfaces Treated with Reactive Plasmas, J. Polym. Sci., Part A: Polym. Chem., 38, 3028, 10.1002/1099-0518(20000901)38:17<3028::aid-pola30>3.0.co;2-b · doi:10.1002/1099-0518(20000901)38:17<3028::aid-pola30>3.0.co;2-b
- Rutkowska, 2002, Biodegradability of Polyethylene Starch Blends in Sea Water, Polym. J. Environ. Stud., 11, 267
- Boucher, 2017, Primary Microplastics in the Oceans
Cited by
Items 501–600 of 1,012
Regulatory Science Perspective on the Analysis of Microplastics and Nanoplastics in Human Food
Duncan, T. V., Khan, S. A., Patri, A. K., & Wiggins, S. (2024) · Analytical Chemistry · doi:10.1021/acs.analchem.3c05408 · Cited by 64
Tarazona, N. A., Machatschek, R., Balcucho, J., Castro-Mayorga, J. L., Saldarriaga, J. F., & Lendlein, A. (2022) · MRS Energy & Sustainability · doi:10.1557/s43581-021-00015-7 · Cited by 62
Assessment of microplastics contamination on agricultural farmlands in central Bangladesh
Himu, M. M., Afrin, S., Akbor, M. A., Siddique, M. A. B., Uddin, M. K., & Rahman, M. M. (2022) · Case Studies in Chemical and Environmental Engineering · doi:10.1016/j.cscee.2022.100195 · Cited by 59
Frost, H., Bond, T., Sizmur, T., & Felipe-Sotelo, M. (2022) · Environmental Science Processes & Impacts · doi:10.1039/d1em00541c · Cited by 76
“134 Biological degradation of PET bres is typically slow.”
BackgroundInfluentialQuantification and Morphological Characterization of Microfibers Emitted from Textile Washing
Dreillard, M., Barros, C. D. F., Rouchon, V., Emonnot, C., Lefebvre, V., Moreaud, M., Guillaume, D., Rimbault, F., & Pagerey, F. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.154973 · Cited by 62
Microplastics: Global occurrence, impact, characteristics and sorting
Prabhu, P. P., Pan, K., & Krishnan, J. N. (2022) · Frontiers in Marine Science · doi:10.3389/fmars.2022.893641 · Cited by 60
“Plastics, including MPs depending on the polymer’s physical and chemical characteristics and the environmental conditions, undergo biotic and abiotic processes of degradation (Sascha et al., 2018; Ali et al., 2020; Oliveira et al., 2020).”
BackgroundKang, M.-G., Kwak, M., & Kim, Y. (2023) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2023.132045 · Cited by 59
Ecotoxicity of micro- and nanoplastics on aquatic algae: Facts, challenges, and future opportunities
Nguyen, M., Lin, C., Nguyen, H.-L., Le, V.-G., Haddout, S., Um, M.-J., Chang, S. W., & Nguyen, D. D. (2023) · Journal of Environmental Management · doi:10.1016/j.jenvman.2023.118982 · Cited by 64
Beyond Microbial Biodegradation: Plastic Degradation by Galleria mellonella
Boschi, A., Scieuzo, C., Salvia, R., Arias, C. F., Pérez, R. P., Bertocchini, F., & Falabella, P. (2023) · Journal of Polymers and the Environment · doi:10.1007/s10924-023-03084-6 · Cited by 64
“Plastic is often only used once before being discarded; this is clearly an intrinsic problem of the plastic industry since years are required for the degradation of the plastic in the environment [6].”
Pereira, D. G. M., Vieira, J. M. M., Vicente, A. A., & Cruz, R. M. S. (2021) · Polymers · doi:10.3390/polym13162632 · Cited by 65
“[57], low-density polyethylene (LDPE) bags are estimated to decompose by 50% after 4.”
BackgroundAigars, J., Barone, M., Suhareva, N., Putna-Nīmane, I., & Dimante‐Deimantovica, I. (2021) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2021.112860 · Cited by 64
UV-assisted TiO2 photocatalytic degradation of virgin LDPE films: Effect of UV-A, UV-C, and TiO2
Kaewkam, P., Kanchanapaetnukul, A., Khamyan, J., Phadmanee, N., Lin, K. A., Kobwittaya, K., & Sirivithayapakorn, S. (2022) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2022.108131 · Cited by 61
Jiao, X., Hu, Z., Zheng, K., Zhu, J., Wu, Y. J., Zhang, X., Hu, J., Yan, W., Zhu, J., Sun, Y., et al. (2022) · Nano Letters · doi:10.1021/acs.nanolett.2c03813 · Cited by 59
Pizzichetti, A. R. P., Pablos, C., Álvarez-Fernández, C., Reynolds, K., Stanley, S., & Marugán, J. (2022) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2023.109338 · Cited by 59
Kothawale, S. S., Kumar, L., & Singh, S. P. (2023) · Environmental Research · doi:10.1016/j.envres.2023.116281 · Cited by 59
Darko, C., Yung, P. W. S., Chen, A., & Acquaye, A. A. (2023) · Resources Environment and Sustainability · doi:10.1016/j.resenv.2023.100134 · Cited by 69
Pellengahr, F., Ghannadzadeh, A., & van der Meer, Y. (2023) · Sustainable Production and Consumption · doi:10.1016/j.spc.2023.09.014 · Cited by 68
Tan, J. Z., Ortega, M., Miller, S. A., Hullfish, C. W., Kim, H., Kim, S., Hu, W., Hu, J. Z., Lercher, J. A., Koel, B. E., et al. (2024) · ACS Catalysis · doi:10.1021/acscatal.4c01213 · Cited by 60
Heinze, W. M., Steinmetz, Z., Klemmensen, N. D. R., Vollertsen, J., & Cornelis, G. (2024) · Environmental Pollution · doi:10.1016/j.envpol.2024.124343 · Cited by 64
Electrocatalytic upcycling of plastic waste: Progress, challenges, and future
Li, J., Chen, J. T., Zhang, L., Matos, J., Wang, L., & Yang, J. (2024) · Electron · doi:10.1002/elt2.63 · Cited by 64
Are micro- and nanoplastics from soil-biodegradable plastic mulches an environmental concern?
Yu, Y., Griffin-LaHue, D., Miles, C. A., Hayes, D. G., & Flury, M. (2021) · Journal of Hazardous Materials Advances · doi:10.1016/j.hazadv.2021.100024 · Cited by 58
Maritime pollution in the Indian Ocean after the MV X-Press Pearl accident
Perera, U. L. H. P., Subasinghe, H. C. S., Ratnayake, A. S., Weerasingha, D. B., & Wijewardhana, T. D. U. (2022) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2022.114301 · Cited by 58
The role of titanium dioxide on the behaviour and fate of plastics in the aquatic environment
Turner, A., & Filella, M. (2023) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2023.161727 · Cited by 59
Wahl, A., Davranche, M., Rabiller‐Baudry, M., Pédrot, M., Khatib, I., Labonne, F., Canté, M., Cuisinier, C., & Gigault, J. (2023) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2023.132686 · Cited by 62
Triazabicyclodecene: A versatile catalyst for polymer synthesis
Kim, J. G., Lee, G. S., & Lee, A. (2023) · Journal of Polymer Science · doi:10.1002/pol.20230643 · Cited by 65
Environmental toxicants and nephrotoxicity: Implications on mechanisms and therapeutic strategies
Yadav, R., Kumar, D., Singh, J., & Jangra, A. (2024) · Toxicology · doi:10.1016/j.tox.2024.153784 · Cited by 57
Chemical recycling: comprehensive overview of methods and technologies
Harasymchuk, I., Kočí, V., & Vitvarová, M. (2024) · International Journal of Sustainable Engineering · doi:10.1080/19397038.2024.2409162 · Cited by 59
“However, on the other hand, this process is highly dependent on auxiliary factors, such as catalysts (Chamas et al. 2020; Singh and Sharma 2008).”
Baldera-Moreno, Y., Pino, V., Farrés, A., Banerjee, A., Gordillo, F., & Andler, R. (2022) · Polymers · doi:10.3390/polym14030375 · Cited by 60
“(2020) [12], a general description of the degradation rates (by mass loss) of plastics in the environment is given, with a summary of”
BackgroundDhanraj, N. D., Hatha, A. A. M., & Jisha, M. S. (2022) · Archives of Microbiology · doi:10.1007/s00203-022-02883-0 · Cited by 59
Cyto–Genotoxic Effect Causing Potential of Polystyrene Micro-Plastics in Terrestrial Plants
Kaur, M., Xu, M., & Wang, L. (2022) · Nanomaterials · doi:10.3390/nano12122024 · Cited by 57
“Plastic has acquired importance due to its low manufacturing cost, light weight, bioavailability, flexibility, stability, durability, viscosity, and long-lasting ability [1,2].”
BackgroundBioplastics: known effects and potential consequences to marine and estuarine ecosystem services
Venâncio, C., Lopes, I., & Oliveira, M. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.136810 · Cited by 61
Trends in Polyester Upcycling for Diversifying a Problematic Waste Stream
Kulkarni, A., Quintens, G., & Pitet, L. M. (2023) · Macromolecules · doi:10.1021/acs.macromol.2c02054 · Cited by 57
A Multimedia Model for Microplastic Particles
Quik, J. T. K., Meesters, J. A. J., & Koelmans, A. A. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2023.163437 · Cited by 59
Zhang, A., Hou, Y., Wang, Y., Wang, Q., Shan, X., & Liu, J. (2023) · Bioresource Technology · doi:10.1016/j.biortech.2023.129164 · Cited by 59
Kalita, N. K., & Hakkarainen, M. (2023) · Biomacromolecules · doi:10.1021/acs.biomac.3c00337 · Cited by 60
Effects of Shape and Size on Microplastic Atmospheric Settling Velocity
Preston, C. A., Neuman, C. M., & Aherne, J. (2023) · Environmental Science & Technology · doi:10.1021/acs.est.3c03671 · Cited by 60
Bhattarai, S., & Janaswamy, S. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.126798 · Cited by 56
Bhat, M. A., Gedik, K., & Gaga, E. O. (2023) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-023-05319-4 · Cited by 60
“Previous research has indicated that the aging process of plastics typically spans several hundred or even thousands of years (Fotopoulou and Karapa-nagioti 2017; Chamas et al. 2020).”
Che, C. A., & Heynderickx, P. M. (2023) · Fuel Communications · doi:10.1016/j.jfueco.2023.100103 · Cited by 59
Shaghaleh, H., Hamoud, Y. A., & Sun, Q. F. (2024) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2024.111892 · Cited by 56
Zantis, L. J., Adamczyk, S., Velmala, S., Adamczyk, B., Vijver, M. G., Peijnenburg, W. J. G. M., & Bosker, T. (2024) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2024.173265 · Cited by 56
Jin, T., Liu, Y., Lyu, H., He, Y., Sun, H., Tang, J., & Xing, B. (2024) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2024.134866 · Cited by 56
Brander, S. M., Senathirajah, K., Fernandez, M. O., Weis, J. S., Kumar, E., Jahnke, A., Hartmann, N. B., Alava, J. J., Farrelly, T. A., Almroth, B. C., et al. (2024) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2024.174881 · Cited by 60
de Farias, P. M., de Sousa, R. V., Maniglia, B. C., Pascall, M. A., Matthes, J., Sadzik, A., Schmid, M., & Fai, A. E. C. (2025) · ACS Omega · doi:10.1021/acsomega.4c09320 · Cited by 57
Born, M. P., & Brüll, C. (2021) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2021.151389 · Cited by 60
Lin, P., Wu, I.-H., Tsai, C.-Y., Kirankumar, R., & Hsieh, S. (2022) · Analytica Chimica Acta · doi:10.1016/j.aca.2022.339516 · Cited by 57
Cheng, J., Eyheraguibel, B., Jacquin, J., Pujo‐Pay, M., Conan, P., Barbe, V., Hoypierres, J., Deligey, G., ter Halle, A., Bruzaud, S., et al. (2022) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2022.110159 · Cited by 55
Peng, B.-Y., Sun, Y. X., Li, P., Yu, S., Xu, Y., Chen, J., Zhou, X., Wu, W., & Zhang, Y. (2023) · Journal of Environmental Management · doi:10.1016/j.jenvman.2023.118818 · Cited by 57
Designing biodegradable alternatives to commodity polymers
Fiandra, E. F., Shaw, L. A., Starck, M., McGurk, C. J., & Mahon, C. S. (2023) · Chemical Society Reviews · doi:10.1039/d3cs00556a · Cited by 56
Sun, J., Wang, X., Zheng, H., Xiang, H., Jiang, X., & Fan, J. (2023) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2023.168618 · Cited by 58
Yeo, J. C. C., Muiruri, J. K., Fei, X., Wang, T., Zhang, X., Xiao, Y., Thitsartarn, W., Tanoto, H., He, C., & Li, Z. (2024) · Biomaterials Advances · doi:10.1016/j.bioadv.2024.213929 · Cited by 59
Monira, S., Roychand, R., Hai, F. I., Bhuiyan, M. A., & Pramanik, B. K. (2024) · Environmental Pollution · doi:10.1016/j.envpol.2024.125310 · Cited by 60
Plastics as a stratigraphic marker in fluvial deposits
Weber, C. J., & Lechthaler, S. (2021) · Anthropocene · doi:10.1016/j.ancene.2021.100314 · Cited by 57
Junaid, M., & Wang, J. (2021) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2021.2002078 · Cited by 57
“…of plastic litter and bulk plastics by several processes, including biodegradation, hydrolysis, mechanical abrasion, and photodegradation (Chamas et al., 2020; Wagner & Reemtsma, 2019) Among freshwater resources, rivers are expected to transport 70 to 80% of the plastics that end up in…”
BackgroundJestratijevic, I. M., Maystorovich, I., & Brodnjak, U. V. (2021) · Sustainable Production and Consumption · doi:10.1016/j.spc.2021.12.013 · Cited by 68
Corella‐Puertas, E., Guieu, P., Aufoujal, A., Bulle, C., & Boulay, A. (2022) · Journal of Industrial Ecology · doi:10.1111/jiec.13269 · Cited by 59
“Note that the specific surface area of microplastics might change over time due to degradation, influencing the polymer degradation rate (Chamas et al., 2020).”
BackgroundMethodInfluentialCucina, M., Carlet, L., Nisi, P. D., Somensi, C. A., Giordano, A., & Adani, F. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.133232 · Cited by 56
Prevalence and implications of microplastics in potable water system: An update
Menon, V., Sharma, S., Gupta, S., Ghosal, A., Nadda, A. K., Jose, R., Sharma, P., Kumar, S., Singh, P., & Raizada, P. (2023) · Chemosphere · doi:10.1016/j.chemosphere.2023.137848 · Cited by 57
Cimini, A., Imperi, E., Picano, A., & Rossi, M. (2023) · Applied Materials Today · doi:10.1016/j.apmt.2023.101833 · Cited by 63
“defined as microplastics (MPs), and remain in the environment for a very long time [200].”
Zhu, J., Dong, G., Feng, F., Ye, J. B., Liao, C.-H., Wu, C., & Chen, S.-C. (2023) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2023.165291 · Cited by 56
Implications of solid waste dumps on the microplastic abundance in groundwater in Kollam, India
Priya, K. L., Iqbal, S., Archana, A. R., Gopika, B., Mina, M., Haddout, S., & Madhu, A. M. (2023) · Journal of Environmental Management · doi:10.1016/j.jenvman.2023.119224 · Cited by 59
A brief review of polymeric blends based on natural polymers and synthetic thermoplastics polymers
Patel, R., Trivedi, R., Raj, M., & Raj, L. (2023) · Chemical Papers · doi:10.1007/s11696-023-03139-x · Cited by 58
“The breakdown rate of such polymers by microbes is extraordinarily slow with PET plastic bottles having an approximated minimum half-life of over 2500 years, while standard HDPE pipes have a half-life of up to 5000 years (Chamas et al. 2020).”
Onn, M., Jalil, M. J., Yusoff, N. I. S. M., Edward, E. B., & Wahit, M. U. (2024) · Industrial Crops and Products · doi:10.1016/j.indcrop.2024.118194 · Cited by 54
Barone, G. D., Rodríguez-Seijo, A., Parati, M., Johnston, B., Erdem, E., Cernava, T., Zhu, Z., Liu, X., Axmann, I. M. I., Lindblad, P. C., et al. (2024) · Environmental Science and Ecotechnology · doi:10.1016/j.ese.2024.100407 · Cited by 62
“The structure of the polymer in fl uences the material's degradation, and the conventional polymers (polyethylene (PE), PP, PS, polyvinyl chloride (PVC), PET and polyurethane (PU)) can be divided according to their chemistry and degradation pathways [64,102,103].”
BackgroundInfluentialChitinous Bioplastic Enabled by Noncovalent Assembly
Ma, X., Lin, X., Chang, C., & Duan, B. (2024) · ACS Nano · doi:10.1021/acsnano.3c12211 · Cited by 54
Kurniawan, T. A., Mohyuddin, A., Othman, M. H. D., Goh, H. H., Zhang, D., Anouzla, A., Aziz, F., Casila, J. C. C., Ali, I., & Pasaribu, B. (2024) · Water Environment Research · doi:10.1002/wer.11070 · Cited by 58
“Cleanup projects, such as those targeting ocean gyres, often encounter significant challenges in retrieving and disposing of ghost gear, which may require specialized equipment and expertise (Chamas et al., 2020).”
A Review of Sources, Hazards, and Removal Methods of Microplastics in the Environment
Meng, X., Yuan, J., Huang, Q., Liu, R., Yang, Y., Yang, X., & Wang, K. (2025) · Water · doi:10.3390/w17010102 · Cited by 62
“As plastic waste is exposed to environmental elements, it undergoes degradation, both physically and chemically, resulting in the formation of smaller plastic fragments [2,3].”
Comprehensive insight into surfactant modified-PBAT physico-chemical and biodegradability properties
Camani, P. H., Souza, A. G., Barbosa, R. F. S., Zanini, N. C., Mulinari, D. R., & Rosa, D. D. S. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2020.128708 · Cited by 56
Grillo, A. C., & Mello, T. J. (2021) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2021.112021 · Cited by 57
The Effect of Poly (Ethylene glycol) Emulation on the Degradation of PLA/Starch Composites
Momeni, S., Ghomi, E. R., Shakiba, M., Navid, S. S., Abdouss, M., Bigham, A., Khosravi, F., Ahmadi, Z., Faraji, M., Abdouss, H., et al. (2021) · Polymers · doi:10.3390/polym13071019 · Cited by 58
“Although environmental factors such as light, heat and oxygen are effective for this purpose, they cannot cause massive molecular mass drop within a relatively short period of time [85].”
BackgroundGao, A. L., & Wan, Y. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.153016 · Cited by 54
Gadaleta, G., Gisi, S. D., Picuno, C., Heerenklage, J., Cafiero, L., Oliviero, M., Notarnicola, M., Kuchta, K., & Sorrentino, A. (2022) · Waste Management · doi:10.1016/j.wasman.2022.03.014 · Cited by 53
Merging Plastics, Microbes, and Enzymes: Highlights from an International Workshop
Jiménez, D. J., Öztürk, B., Wei, R., Bugg, T. D. H., Amaya-Gómez, C. V., Salcedo, F., Castro-Mayorga, J. L., Saldarriaga, J. F., & Tarazona, N. A. (2022) · Applied and Environmental Microbiology · doi:10.1128/aem.00721-22 · Cited by 57
“For instance, a plastic bottle made of high-density PE with a wall thickness of ;500 mm will take 250 years to lose the first 50% of the polymer mass (half-life) when buried inland or 58 years to do the same in a marine environment (10).”
BackgroundZhang, Y., Lin, Y., Gou, H., Feng, X., Zhang, X., & Yang, L. (2022) · Polymers · doi:10.3390/polym14235127 · Cited by 57
Degradation of polyethylene by Klebsiella pneumoniae Mk-1 isolated from soil
Zhang, X., Feng, X., Lin, Y., Gou, H., Zhang, Y., & Yang, L. (2023) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2023.114965 · Cited by 54
Yang, D., Fan, B., Sun, G., He, Y.-C., & Ma, C. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.126427 · Cited by 53
Machine learning prediction and interpretation of the impact of microplastics on soil properties
Withana, P. A., Li, J., Senadheera, S. S., Fan, C., Wang, Y., & Ok, Y. S. (2023) · Environmental Pollution · doi:10.1016/j.envpol.2023.122833 · Cited by 54
Enhanced reproductive toxicity of photodegraded polylactic acid microplastics in zebrafish
Zhang, L., Luo, Y., Zhang, Z., Pan, Y., Li, X., Zhuang, Z., Li, J., Luo, Q., & Chen, X. (2023) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2023.168742 · Cited by 56
Ghanadi, M., & Padhye, L. P. (2024) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2024.133509 · Cited by 59
Optimizing bioplastics translation
Hào, L. T., Ju, S., Hwang, D. K., Hwang, D. S., Ok, Y. S., Hwang, S. Y., Kim, H. J., Jeon, H., Park, J., Oh, D. X., et al. (2024) · Nature Reviews Bioengineering · doi:10.1038/s44222-023-00142-5 · Cited by 55
“For example, PLA degrades approximately 2.8 times slower in soil and approximately 7.9 times slower in marine environment compared to composting conditions 116 .”
InfluentialRecent advances in extruded polylactic acid-based composites for food packaging: A review
Lyn, F. H., Ismail‐Fitry, M. R., Adzahan, N. M., Tan, T. B., & Hanani, Z. A. N. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.131340 · Cited by 64
Khanna, R., Chandra, A. P., Sen, S., Konyukhov, Y., Fuentes, E., Burmistrov, I. N., & Kravchenko, M. (2024) · Sustainability · doi:10.3390/su16198704 · Cited by 58
Vega, G. C., Gross, A., & Birkved, M. (2021) · Sustainable Production and Consumption · doi:10.1016/j.spc.2021.07.008 · Cited by 62
“…al., 2019 ) or roduct type to loss ( Kawecki and Nowack, 2019 ), rather than esti- ating degradation kinetics for various types of polymers, excludng overwhelming evidence that MPs are formed in any polymer urface exposed to weathering ( Chamas et al., 2020 ; Lambert et al., 014 ; Vasile, 20 0 0 ).”
BackgroundMethodInfluentialMicro and Nano-Plastics in the Environment: Research Priorities for the Near Future
Vighi, M., Bayo, J., Fernández‐Piñas, F., Gago, J., Gómez, M., Hernández‐Borges, J., Herrera, A., Landaburu‐Aguirre, J., Muniategui‐Lorenzo, S., Muñoz, A., et al. (2021) · Reviews of Environmental Contamination and Toxicology · doi:10.1007/398_2021_69 · Cited by 66
Puttonen, T., Salmi, M., & Partanen, J. P. (2021) · Polymer Testing · doi:10.1016/j.polymertesting.2021.107376 · Cited by 54
Oliaei, E., Olsén, P., Lindström, T., & Berglund, L. A. (2022) · Nature Communications · doi:10.1038/s41467-022-33283-z · Cited by 61
Schaerer, L. G., Wu, R., Putman, L. I., Pearce, J. M., Lu, T., Shonnard, D. R., Ong, R. G., & Techtmann, S. M. (2023) · Trends in Biotechnology · doi:10.1016/j.tibtech.2022.06.012 · Cited by 52
Mahari, W. A. W., Waiho, K., Fazhan, H., Ncibi, M. C., Hafsa, J., Mrid, R. B., Fal, S., Arroussi, H. E., Peng, W., Tabatabaei, M., et al. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.133036 · Cited by 59
Abhilash, & Inamdar, I. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.155895 · Cited by 54
Patil, P. B., Maity, S., & Sarkar, A. (2022) · Environmental Monitoring and Assessment · doi:10.1007/s10661-022-10539-1 · Cited by 59
“Complete disposal and degradation of this generated waste are difficult due to the absence of an efficient, economic, and ecofriendly method which results in their accumulation in different places around the globe (Chamas et al., 2020).”
MethodComputer-aided discovery of a novel thermophilic laccase for low-density polyethylene degradation
Zhang, Y., Plesner, T. J., Ouyang, Y., Zheng, Y., Bouhier, E., Berentzen, E. I., Zhang, M., Zhou, P., Zimmermann, W., Andersen, G. R., et al. (2023) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2023.131986 · Cited by 54
Catalytic conversion of mixed polyolefins under mild atmospheric pressure
Zhao, B., Tan, H., Yang, J., Zhang, X., Yu, Z., Sun, H., Wei, J., Zhao, X., Zhang, Y., Chen, L., et al. (2024) · The Innovation · doi:10.1016/j.xinn.2024.100586 · Cited by 78
Fully Biodegradable Packaging Films for Fresh Food Storage Based on Oil‐Infused Bacterial Cellulose
Chen, G., Wang, K., Chen, P., Cai, D., Shao, Y., Xia, R., Li, C., Wang, H., Ren, F., Cheng, X., et al. (2024) · Advanced Science · doi:10.1002/advs.202400826 · Cited by 63
Ali, S. A., Mittal, D., & Kaur, G. (2021) · World Journal of Microbiology and Biotechnology · doi:10.1007/s11274-021-03024-3 · Cited by 53
Keerthika, K., Padmavathy, P., Velu, R., & Jeyashakila, R. (2022) · Environmental Science and Pollution Research · doi:10.1007/s11356-022-19033-0 · Cited by 54
Bangar, S. P., Whiteside, W. S., Dunno, K. D., Cavender, G. A., & Dawson, P. (2022) · Food Research International · doi:10.1016/j.foodres.2022.111384 · Cited by 54
Borkar, S. S., Helmer, R., Mahnaz, F., Majzoub, W. N., Mahmoud, W., Al‐Rawashdeh, M., & Shetty, M. (2022) · Chem Catalysis · doi:10.1016/j.checat.2022.09.003 · Cited by 61
Cusano, I., Campagnolo, L., Aurilia, M., Costanzo, S., & Grizzuti, N. (2023) · Materials · doi:10.3390/ma16093358 · Cited by 51
Makryniotis, K., Nikolaivits, E., Gkountela, C. I., Vouyiouka, S., & Topakas, E. (2023) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2023.131574 · Cited by 54
Ou, Y., Yan, S., Lu, Y., Chen, X., & Zhou, T. (2023) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2023.131818 · Cited by 52
Metadata
- Authors
- Chamas, A., Moon, H., Zheng, J., Qiu, Y., Tabassum, T., Jang, J. H., Abu-Omar, M., Scott, S. L., & Suh, S.
- Affiliations
- University of California, Santa Barbara (US)
- University of California, Santa Barbara , , , ,
- Corresponding author
- Scott, Susannah L.
- Suh, Sangwon
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-02-03
- Volume
- 8
- Issue
- 9
- Pages
- 3494-3511
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W3005332201
- Cited by
- 3,463
- References
- 173
- Citations by year
- 2026: 573 · 2025: 690 · 2024: 699 · 2023: 657 · 2022: 519 · 2021: 268 · 2020: 54
- FWCI
- 92.35
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- ACS Sustainable Chemistry & Engineering (publishedVersion, cc-by)
- eScholarship (California Digital Library) (submittedVersion)
- Funders
- Division of Graduate Education (DGE-1633764)
- Division of Chemical, Bioengineering, Environmental, and Transport Systems (CBET-1604095)
- University of California, Santa Barbara (NA)
- Environmental Protection Agency (83557907)
- Topics
- Physical Sciences › Environmental Science › Pollution › Microplastics and Plastic Pollution
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- plastic degradation, plastic waste, thermoplastics, half-life estimation, high-density polyethylene, polylactic acid, marine environment, degradation pathways
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.