The DOI matches its Crossref record; the references it cites are not checked yet.
Cross-Kingdom Composites: Fungal Mycelia and Bacterial PHB for Sustainable Biofabrication
Abstract
Crafting new materials using microbial biomass, such as fungal mycelium and bacterially synthesized biopolymers as building blocks, can be a very efficient solution for the post-petroleum polymers era, especially if they can be engineered in similar ways to conventional polymers. In this study, we used melt extrusion followed by molding processes to develop a biocomposite of mycelium from the non-pathogenic fungal strain Pleurotus ostreatus, grown on coffee-silverskin, and processed together with the bacterially synthesized polyhydroxybutyrate biopolymer and the bio-based plasticizer epoxide soybean oil methyl ester, the latter being important for efficient melt processing. The different amounts of the bacterial biopolymer and the fungal mycelium biomass affect the structural, mechanical, thermal, barrier, antioxidant, and overall migration properties, as well as the biodegradation of the developed biocomposites. Importantly, based on the TOPSIS performance analysis, we conclude that the most suitable composition to be used for eco-friendly food packaging is the one with 5 wt % mycelium/coffee silverskin biomass introduced in the plasticized polymer matrix. This novel composite biomaterial, derived from the fungal, bacterial, and plant kingdoms and processed using conventional plastic methods, paves the way for low-cost, sustainable biocomposites with broad application potential.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
The citation lists haven’t been fetched yet
Research works printed but not linked: 43
- Haneef, 2017, Advanced Materials From Fungal Mycelium: Fabrication and Tuning of Physical Properties, Sci. Rep., 7, 41292, 10.1038/srep41292 · DOI · Paper page
- Sayfutdinova, 2022, Structure and Properties of Cellulose/Mycelium Biocomposites, Polymers, 14, 1519, 10.3390/polym14081519 · DOI
- Sydor, 2022, Fungi in Mycelium-Based Composites: Usage and Recommendations, Materials, 15, 6283, 10.3390/ma15186283 · DOI
- Cottet, 2020, Biobased Materials from Microbial Biomass and Its Derivatives, Materials, 13, 1263, 10.3390/ma13061263 · DOI
- Jones, 2018, Thermal Degradation and Fire Properties of Fungal Mycelium and Mycelium - Biomass Composite Materials, Sci. Rep., 8, 17583, 10.1038/s41598-018-36032-9 · DOI · Paper page
- Manan, 2021, Synthesis and applications of fungal mycelium-based advanced functional materials, J. Bioresour. Bioprod., 6, 1, 10.1016/j.jobab.2021.01.001 · DOI · Paper page
- Antinori, 2020, Fine-Tuning of Physicochemical Properties and Growth Dynamics of Mycelium-Based Materials, ACS Appl. Bio Mater., 3, 1044, 10.1021/acsabm.9b01031 · DOI
- Aiduang, 2022, Amazing Fungi for Eco-Friendly Composite Materials: A Comprehensive Review, J. Fungi, 8, 842, 10.3390/jof8080842 · DOI
- Jones, 2020, Engineered mycelium composite construction materials from fungal biorefineries: A critical review, Mater. Des., 187, 10.1016/j.matdes.2019.108397 · DOI · Paper page
- Ruggeri, 2023, Mycelium-based biomaterials as smart devices for skin wound healing, Front. Bioeng. Biotechnol., 11, 10.3389/fbioe.2023.1225722 · DOI
- Antinori, 2021, Advanced mycelium materials as potential self-growing biomedical scaffolds, Sci. Rep., 11, 12630, 10.1038/s41598-021-91572-x · DOI
- Asadollahzadeh, 2022, Application of Fungal Biomass for the Development of New Polylactic Acid-Based Biocomposites, Polymers, 14, 1738, 10.3390/polym14091738 · DOI · Paper page
- Sun, 2022, Insight into mycelium-lignocellulosic bio-composites: Essential factors and properties, Composites, Part A, 161, 10.1016/j.compositesa.2022.107125 · DOI
- Bonga, 2024, Mycelium Agrowaste-Bound Biocomposites as Thermal and Acoustic Insulation Materials in Building Construction, Macromol. Mater. Eng., 309, 10.1002/mame.202300449 · DOI
- Sun, 2020, Functionality of Surface Mycelium Interfaces in Wood Bonding, ACS Appl. Mater. Interfaces, 12, 57431, 10.1021/acsami.0c18165 · DOI
- Sharma, 2022, Mycelium bricks and composites for sustainable construction industry: a state-of-the-art review, Innovation Infrastruct. Solutions, 7, 298, 10.1007/s41062-022-00903-y · DOI
- Rahman, 2022, The 3D Printing of Biomass−Fungi Composites: Effects of Waiting Time after Mixture Preparation on Mechanical Properties, Rheological Properties, Minimum Extrusion Pressure, and Print Quality of the Prepared Mixture, J. Compos. Sci., 6, 237, 10.3390/jcs6080237 · DOI
- Elsacker, 2022, Large-scale robotic extrusion-based additive manufacturing with living mycelium materials, Sustainable Futures, 4, 10.1016/j.sftr.2022.100085 · DOI
- Soh, 2020, Development of an extrudable paste to build mycelium-bound composites, Mater. Des., 195, 10.1016/j.matdes.2020.109058 · DOI
- Sydor, 2022, Mycelium-Based Composites in Art, Architecture, and Interior Design: A Review, Polymers, 14, 145, 10.3390/polym14010145 · DOI
- Lewandowska, 2024, Mycelium-Based Composites: Surveying Their Acceptance by Professional Architects, Biomimetics, 9, 333, 10.3390/biomimetics9060333 · doi:10.3390/biomimetics9060333
- Talaniuk, 2023, Development of Polyhydroxybutyrate-Based Packaging Films and Methods to Their Ultrasonic Welding, Materials, 16, 6617, 10.3390/ma16206617 · doi:10.3390/ma16206617
- Muiruri, 2023, Recent advances of sustainable Short-chain length polyhydroxyalkanoates (Scl-PHAs) − Plant biomass composites, Eur. Polym. J., 187, 10.1016/j.eurpolymj.2023.111882 · DOI
- Lopez-Arenas, 2017, Analysis of the fermentation strategy and its impact on the economics of the production process of PHB (polyhydroxybutyrate), Comput. Chem. Eng., 107, 140, 10.1016/j.compchemeng.2017.03.009 · doi:10.1016/j.compchemeng.2017.03.009
- Barbosa, 2021, Plasticization of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with an Oligomeric Polyester: Miscibility and Effect of the Microstructure and Plasticizer Distribution on Thermal and Mechanical Properties, ACS Omega, 6, 3278, 10.1021/acsomega.0c05765 · doi:10.1021/acsomega.0c05765
- Gigante, 2021, Utilization of coffee silverskin in the production of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) biopolymer-based thermoplastic biocomposites for food contact applications, Composites, Part A, 140, 10.1016/j.compositesa.2020.106172 · DOI
- Zhijiang, 2007, Preparation of biodegradable poly(3-hydroxybutyrate) (PHB) and poly(ethylene glycol) (PEG) graft copolymer, J. Mater. Sci., 42, 5886, 10.1007/s10853-007-1811-7 · DOI
- Garcia-Campo, 2017, Environmentally Friendly Compatibilizers from Soybean Oil for Ternary Blends of Poly(lactic acid)-PLA, Poly(ε-caprolactone)-PCL and Poly(3-hydroxybutyrate)-PHB, Materials, 10, 1339, 10.3390/ma10111339 · DOI
- Barmpaki, 2024, Eco-friendly Blends of Polylactic Acid and Polyhydroxybutyrate Enhanced with Epoxidized Soybean Oil Methyl Ester for Food-Packaging Applications, ACS Appl. Polym. Mater., 6, 8997, 10.1021/acsapm.4c01341 · doi:10.1021/acsapm.4c01341
- Paul, 2021, Effect of Green Plasticizer on the Performance of Microcrystalline Cellulose/Polylactic Acid Biocomposites, ACS Appl. Polym. Mater., 3, 3071, 10.1021/acsapm.1c00281 · doi:10.1021/acsapm.1c00281
- Quilez-Molina, 2022, Composites of Thermoplastic Starch and Lignin-Rich Agricultural Waste for the Packaging of Fatty Foods, ACS Sustainable Chem. Eng., 10, 15402, 10.1021/acssuschemeng.2c04326 · doi:10.1021/acssuschemeng.2c04326
- Xing, 2016, Epoxidized soybean oil-plasticized poly(lactic acid) films performance as impacted by storage, J. Appl. Polym. Sci., 133, 10.1002/app.43201 · DOI
- Jose, 2021, Investigations into the Development of a Mycelium Biocomposite to Substitute Polystyrene in Packaging Applications, Arabian J. Sci. Eng., 46, 2975, 10.1007/s13369-020-05247-2 · DOI
- Chulikavit, 2023, Fireproofing flammable composites using mycelium: Investigating the effect of deacetylation on the thermal stability and fire reaction properties of mycelium, Polym. Degrad. Stab., 215, 10.1016/j.polymdegradstab.2023.110419 · doi:10.1016/j.polymdegradstab.2023.110419
- Gondim, 2024, Alkaline pretreatment and steam explosion process on coffee silverskin and incorporation of cellulose fibers in poly(butylene adipate-co-terephthalate), J. Appl. Polym. Sci., 141, 10.1002/app.55287 · DOI
- Wenzel, 1949, Surface Roughness and Contact Angle, J. Phys. Colloid Chem., 53, 1466, 10.1021/j150474a015 · DOI · Paper page
- Wang, 2020, Influence of surface roughness on contact angle hysteresis and spreading work, Colloid Polym. Sci., 298, 1107, 10.1007/s00396-020-04680-x · DOI
- Bastarrachea, 2011, Engineering Properties of Polymeric-Based Antimicrobial Films for Food Packaging: A Review, Food Eng. Rev., 3, 79, 10.1007/s12393-011-9034-8 · DOI · Paper page
- Heredia-Guerrero, 2017, All-Natural Sustainable Packaging Materials Inspired by Plant Cuticles, Adv. Sustainable Syst., 1, 10.1002/adsu.201600024 · DOI
- Perotto, 2018, Bioplastics from vegetable waste via an eco-friendly water-based process, Green Chem., 20, 894, 10.1039/C7GC03368K · DOI
- Leyva-Porras, 2021, Application of Antioxidants as an Alternative Improving of Shelf Life in Foods, Polysaccharides, 2, 594, 10.3390/polysaccharides2030036 · doi:10.3390/polysaccharides2030036
- Xu, 2002, In situ FTIR study on melting and crystallization of polyhydroxyalkanoates, Polymer, 43, 6893, 10.1016/S0032-3861(02)00615-8 · DOI · Paper page
- Wang, 2018, Moisture and Oxygen Barrier Properties of Cellulose Nanomaterial-Based Films, ACS Sustainable Chem. Eng., 6, 49, 10.1021/acssuschemeng.7b03523 · DOI · Paper page
Metadata
- Authors
- Paul, U. C., Bonga, K. B., Rinaldi, C., Economou, C. N., Fragouli, D., & Athanassiou, A.
- Venue
- ACS Sustainable Resource Management
- Publisher
- American Chemical Society (ACS)
- Published
- 2026-02-09
- Volume
- 3
- Issue
- 2
- Pages
- 349-358
- ISSN
- 2837-1445
- Cited by
- 0
- Language
- en
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Cross-Kingdom Composites: Fungal Mycelia and Bacterial PHB for Sustainable Biofabrication. https://app.cochat.ai/papers/10.1021/acssusresmgt.5c00347
- The paper
- Paul, U. C., Bonga, K. B., Rinaldi, C., Economou, C. N., Fragouli, D., & Athanassiou, A. (2026). Cross-Kingdom Composites: Fungal Mycelia and Bacterial PHB for Sustainable Biofabrication. ACS Sustainable Resource Management. https://doi.org/10.1021/acssusresmgt.5c00347
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.