The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Lithium Insertion in Nanostructured TiO2(B) Architectures
Abstract
Electric vehicles and grid storage devices have potentialto become feasible alternatives to current technology, but only if scientists can develop energy storage materials that offer high capacity and high rate capabilities. Chemists have studied anatase, rutile, brookite and TiO2(B) (bronze) in both bulk and nanostructured forms as potential Li-ion battery anodes. In most cases, the specific capacity and rate of lithiation and delithiation increases as the materials are nanostructured. Scientists have explained these enhancements in terms of higher surface areas, shorter Li(+) diffusion paths and different surface energies for nanostructured materials allowing for more facile lithiation and delithiation. Of the most studied polymorphs, nanostructured TiO2(B) has the highest capacity with promising high rate capabilities. TiO2(B) is able to accommodate 1 Li(+) per Ti, giving a capacity of 335 mAh/g for nanotubular and nanoparticulate TiO2(B). The TiO2(B) polymorph, discovered in 1980 by Marchand and co-workers, has been the focus of many recent studies regarding high power and high capacity anode materials with potential applications for electric vehicles and grid storage. This is due to the material's stability over multiple cycles, safer lithiation potential relative to graphite, reasonable capacity, high rate capability, nontoxicity, and low cost (Bruce, P. G.; Scrosati, B.; Tarascon, J.-M. Nanomaterials for Rechargeable Lithium Batteries. Angew. Chem., Int. Ed.2008, 47, 2930-2946). One of the most interesting properties of TiO2(B) is that both bulk and nanostructured forms lithiate and delithiate through a surface redox or pseudocapacitive charging mechanism, giving rise to stable high rate charge/discharge capabilities in the case of nanostructured TiO2(B). When other polymorphs of TiO2 are nanostructured, they still mainly intercalate lithium through a bulk diffusion-controlled mechanism. TiO2(B) has a unique open crystal structure and low energy Li(+) pathways from surface to subsurface sites, which many chemists believe to contribute to the pseudocapacitive charging. Several disadvantages exist as well. TiO2(B), and titania in general, suffers from poor electronic and ionic conductivity. Nanostructured TiO2(B) also exhibits significant irreversible capacity loss (ICL) upon first discharge (lithiation). Nanostructuring TiO2(B) can help alleviate problems with poor ionic conductivity by shortening lithium diffusion pathways. Unfortunately, this also increases the likelihood of severe first discharge ICL due to reactive Ti-OH and Ti-O surface sites that can cause unwanted electrolyte degradation and irreversible trapping of Li(+). Nanostructuring also results in lowered volumetric energy density, which could be a considerable problem for mobile applications. We will also discuss these problems and proposed solutions. Scientists have synthesized TiO2(B) in a variety of nanostructures including nanowires, nanotubes, nanoparticles, mesoporous-ordered nanostructures, and nanosheets. Many of these structures exhibit enhanced Li(+) diffusion kinetics and increased specific capacities compared to bulk material, and thus warrant investigation on how nanostructuring influences lithiation behavior. This Account will focus on these influences from both experimental and theoretical perspectives. We will discuss the surface charging mechanism that gives rise to the increased lithiation and delithiation kinetics for TiO2(B), along with the influence of dimensional confinement of the nanoarchitectures, and how nanostructuring can change the lithiation mechanism considerably.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrochemical Methods: Fundamentals and Applications
Bard, A. J., & Faulkner, L. R. (1980) · Cited by 22,435
Electrochemical Methods: Fundamentals and Applications
de Rooij, D. M. R. (2003) · Anti-Corrosion Methods and Materials · doi:10.1108/acmm.2003.12850eae.001 · Cited by 13,009
Nanomaterials for Rechargeable Lithium Batteries
Bruce, P. G., Scrosati, B., & Tarascon, J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702505 · Cited by 5,886
Pseudocapacitive Contributions to Electrochemical Energy Storage in TiO2 (Anatase) Nanoparticles
Wang, J., Polleux, J., Lim, J., & Dunn, B. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp074464w · Cited by 5,333
Electrochemical Energy Storage for Green Grid
Yang, Z., Zhang, J., Kintner-Meyer, M. C. W., Lu, X., Choi, D., Lemmon, J. P., & Liu, J. (2011) · Chemical Reviews · doi:10.1021/cr100290v · Cited by 5,250
Transition from “Supercapacitor” to “Battery” Behavior in Electrochemical Energy Storage
Conway, B. E. (1991) · Journal of The Electrochemical Society · doi:10.1149/1.2085829 · Cited by 2,339
Li+ Ion Insertion in TiO2 (Anatase). 2. Voltammetry on Nanoporous Films
Lindström, H., Södergren, S., Solbrand, A., Rensmo, H., Hjelm, J., Hagfeldt, A., & Lindquist, S.-E. (1997) · The Journal of Physical Chemistry B · doi:10.1021/jp970490q · Cited by 1,669
Templated Nanocrystal-Based Porous TiO2 Films for Next-Generation Electrochemical Capacitors
Brezesinski, T., Wang, J., Polleux, J., Dunn, B., & Tolbert, S. H. (2009) · Journal of the American Chemical Society · doi:10.1021/ja8057309 · Cited by 1,076
Lithium‐Ion Intercalation into TiO2‐B Nanowires
Armstrong, A. R., Armstrong, G., Canales, J., García, R., & Bruce, P. G. (2005) · Advanced Materials · doi:10.1002/adma.200400795 · Cited by 824
Electrochemistry and the Future of the Automobile
Wagner, F. T., Lakshmanan, B., & Mathias, M. F. (2010) · The Journal of Physical Chemistry Letters · doi:10.1021/jz100553m · Cited by 763
Cited by
Pseudocapacitive oxide materials for high-rate electrochemical energy storage
Augustyn, V., Simon, P., & Dunn, B. (2014) · Energy & Environmental Science · doi:10.1039/c3ee44164d · Cited by 5,575
Pseudocapacitance: From Fundamental Understanding to High Power Energy Storage Materials
Fleischmann, S., Mitchell, J. B., Wang, R., Zhan, C., Jiang, D.-E., Presser, V., & Augustyn, V. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00170 · Cited by 1,942
Rational material design for ultrafast rechargeable lithium-ion batteries
Tang, Y., Zhang, Y., Li, W., Ma, B., & Chen, X. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00442f · Cited by 987
Review of Hybrid Ion Capacitors: From Aqueous to Lithium to Sodium
Ding, J., Hu, W., Paek, E., & Mitlin, D. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00116 · Cited by 970
Nanostructured Mo-based electrode materials for electrochemical energy storage
Hu, X., Zhang, W., Liu, X., Mei, Y., & Huang, Y. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00350k · Cited by 711
Transition metal based battery-type electrodes in hybrid supercapacitors: A review
Liu, H., Liu, X., Wang, S., Liu, H.-K., & Li, L. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.03.003 · Cited by 710
Multi-shelled hollow micro-/nanostructures
Qi, J., Lai, X., Wang, J., Tang, H., Ren, H., Yang, Y., Jin, Q., Zhang, L., Yu, R., Ma, G., et al. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00344j · Cited by 676
Titanium Oxide Nanosheets: Graphene Analogues with Versatile Functionalities
Wang, L., & Sasaki, T. (2014) · Chemical Reviews · doi:10.1021/cr400627u · Cited by 646
Challenges and Strategies for High‐Energy Aqueous Electrolyte Rechargeable Batteries
Zhang, H., Liu, X., Li, H., Hasa, I., & Passerini, S. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202004433 · Cited by 592
Exploring Anomalous Charge Storage in Anode Materials for Next-Generation Li Rechargeable Batteries
Kim, H., Choi, W., Yoon, J., Um, J. H., Lee, W., Kim, J., Cabana, J., & Yoon, W.-S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00618 · Cited by 527
Research Progress on Negative Electrodes for Practical Li‐Ion Batteries: Beyond Carbonaceous Anodes
Aravindan, V., Lee, Y., & Madhavi, S. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402225 · Cited by 462
Recent advances in titanium-based electrode materials for stationary sodium-ion batteries
Guo, S., Yi, J., Sun, Y., & Zhou, H. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01807f · Cited by 453
Kumar, A., Choudhary, P., Kumar, A., Camargo, P. H. C., & Krishnan, V. (2022) · Small · doi:10.1002/smll.202101638 · Cited by 441
Multi-shelled metal oxides prepared via an anion-adsorption mechanism for lithium-ion batteries
Wang, J., Tang, H., Zhang, L., Ren, H., Yu, R., Jin, Q., Qi, J., Mao, D., Yang, M., Wang, Y., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2016.50 · Cited by 432
Ren, H., Yu, R., Wang, J., Jin, Q., Yang, M., Mao, D., Kisailus, D., Zhao, H., & Wang, D. (2014) · Nano Letters · doi:10.1021/nl503378a · Cited by 428
Eddy, D. R., Permana, M. D., Sakti, L. K., Sheha, G. A. N., Solihudin, Hidayat, S., Takei, T., Kumada, N., & Rahayu, I. (2023) · Nanomaterials · doi:10.3390/nano13040704 · Cited by 424
Tang, Y., Zhang, Y., Deng, J., Wei, J., Tam, H. L., Chandran, B. K., Dong, Z., Chen, Z., & Chen, X. (2014) · Advanced Materials · doi:10.1002/adma.201402000 · Cited by 422
Recent advances in inorganic 2D materials and their applications in lithium and sodium batteries
Shi, L., & Zhao, T. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta09831b · Cited by 416
Review of functional titanium oxides. I: TiO2 and its modifications
Rahimi, N., Pax, R. A., & Gray, E. M. (2016) · Progress in Solid State Chemistry · doi:10.1016/j.progsolidstchem.2016.07.002 · Cited by 362
Wang, R., Wang, L., Liu, R., Li, X., Wu, Y., & Ran, F. (2024) · ACS Nano · doi:10.1021/acsnano.3c08712 · Cited by 336
Recent advances in and perspectives on pseudocapacitive materials for Supercapacitors–A review
Park, H. W., & Roh, K. C. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.232558 · Cited by 326
Titanate and titania nanostructured materials for environmental and energy applications: a review
Zhang, Y., Jiang, Z., Huang, J., Lim, L. Y., Li, W., Deng, J., Gong, D., Tang, Y., Lai, Y., & Chen, Z. (2015) · RSC Advances · doi:10.1039/c5ra11298b · Cited by 318
Wang, X., & Shen, G. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.04.011 · Cited by 298
Pseudocapacitive Charge Storage in Thick Composite MoS2 Nanocrystal‐Based Electrodes
Cook, J. B., Kim, H., Lin, T. C., Lai, C., Dunn, B., & Tolbert, S. H. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601283 · Cited by 291
Electrochemical Kinetics of Nanostructured Nb2O5Electrodes
Come, J., Augustyn, V., Kim, J. W., Rozier, P., Taberna, P.-L., Gogotsi, P., Long, J. W., Dunn, B., & Simon, P. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.040405jes · Cited by 281
Metadata
- Authors
- Dylla, A. G., Henkelman, G., & Stevenson, K. J.
- Venue
- Accounts of Chemical Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-02-20
- Volume
- 46
- Issue
- 5
- Pages
- 1104-1112
- ISSN
- 0001-4842 (ISSN-L)
- 1520-4898
- OpenAlex
- W2312255598
- Cited by
- 424
- References
- 30
- FWCI
- 29.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.