The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Structure and Morphology Changes during in Vitro Degradation of Electrospun Poly(glycolide-co-lactide) Nanofiber Membrane
Abstract
Electrospun poly(glycolide-co-lactide) (PLA10GA90, LA/GA ratio 10/90) biodegradable nanofiber membranes possessed very high surface area to volume ratios and were completely noncrystalline with a relatively lowered glass transition temperature. These characteristics led to very different structure, morphology, and property changes during in vitro degradation, which were examined systematically. A shrinkage study showed that the electrospun crystallizable but amorphous PLA10GA90 membranes exhibited a very small shrinkage percentage when compared with the electrospun membranes of noncrystallizable poly(lactide-co-glycolide) (PLA75GA25, LA/GA 75/25) and poly(d,l-lactide). Although the weight loss of electrospun PLA10GA90 membranes exhibited a similar degradation behavior as cast thin films, detailed studies showed that the structure and morphology changes in electrospun membranes followed different pathways during the hydrolytic degradation. After 1 day of degradation in buffer solution at 37 degrees C, electrospun PLA10GA90 membranes exhibited a sudden increase in crystallinity and glass transition temperature, due to the fast thermally induced crystallization process. The continuous increase in crystallinity and apparent crystal size, as well as the decrease in long period and lamellae thickness, indicated that the thermally induced crystallization was followed by a chain cleavage induced crystallization process. The mass loss rate was accelerated after 6 days of degradation. The increase in glass transition temperature during this period further confirmed that the degradation of PLA10GA90 nanofibers was initiated from the amorphous region within the lamellar superstructures. A mechanism of structure and morphology changes during in vitro degradation of electrospun PLA10GA90 nanofibers is proposed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Klug, H. P., & Alexander, L. (1954) · CERN Document Server (European Organization for Nuclear Research) · Cited by 4,224
Bending instability of electrically charged liquid jets of polymer solutions in electrospinning
Reneker, D. H., Yarin, A. L., Fong, H., & Koombhongse, S. (2000) · Journal of Applied Physics · doi:10.1063/1.373532 · Cited by 2,462
Electrospun nanofibrous structure: A novel scaffold for tissue engineering
Li, W., Laurencin, C. T., Caterson, E. J., Tuan, R. S., & Ko, F. K. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10167 · Cited by 2,427
Electrospinning of Collagen Nanofibers
Matthews, J. A., Wnek, G. E., Simpson, D. G., & Bowlin, G. L. (2002) · Biomacromolecules · doi:10.1021/bm015533u · Cited by 2,251
Structure and process relationship of electrospun bioabsorbable nanofiber membranes
Zong, X., Kim, K., Fang, D., Ran, S., Hsiao, B. S., & Chu, B. (2002) · Polymer · doi:10.1016/s0032-3861(02)00275-6 · Cited by 1,893
Self-citationMooney, D. J., Baldwin, D. F., Suh, N. P., Vacanti, J. P., & Langer, R. (1996) · Biomaterials · doi:10.1016/0142-9612(96)87284-x · Cited by 1,085
Experimental characterization of electrospinning: the electrically forced jet and instabilities
Shin, Y. M., Hohman, M. M., Brenner, M. P., & Rutledge, G. C. (2001) · Polymer · doi:10.1016/s0032-3861(01)00540-7 · Cited by 1,070
In vitro and in vivo degradation of porous poly(dl-lactic-co-glycolic acid) foams
Lu, L., Peter, S. J., D. Lyman, M., Lai, H.-L., Leite, S. M., Tamada, J. A., Uyama, S., Vacanti, J. P., Langer, R., & Mikos, A. G. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00047-8 · Cited by 668
Li, S. (1999) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(1999)48:3<342::aid-jbm20>3.0.co;2-7 · Cited by 664
Reed, A. M., & Gilding, D. K. (1981) · Polymer · doi:10.1016/0032-3861(81)90168-3 · Cited by 502
Cited by
Nanofiber technology: Designing the next generation of tissue engineering scaffolds
Barnes, C. P., Sell, S. A., Boland, E. D., Simpson, D. G., & Bowlin, G. L. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.04.022 · Cited by 1,141
Jiang, L., Zhao, Y., & Zhai, J. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200460333 · Cited by 1,044
Nano-fibrous scaffolds for tissue engineering
Smith, L. A., & Ma, P. X. (2004) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2003.12.004 · Cited by 652
Jiang, H., Hu, Y., Li, Y., Zhao, P., Zhu, K., & Chen, W. (2005) · Journal of Controlled Release · doi:10.1016/j.jconrel.2005.08.006 · Cited by 533
Li, W.-J., Cooper, J. A., Mauck, R. L., & Tuan, R. S. (2006) · Acta Biomaterialia · doi:10.1016/j.actbio.2006.02.005 · Cited by 482
Electrospinning jets and nanofibrous structures
Garg, K., & Bowlin, G. L. (2011) · Biomicrofluidics · doi:10.1063/1.3567097 · Cited by 474
Three-dimensional electrospun ECM-based hybrid scaffolds for cardiovascular tissue engineering
Heydarkhan-Hagvall, S., Schenke-Layland, K., Dhanasopon, A. P., Rofail, F., Smith, H., Wu, B. M., Shemin, R., Beygui, R. E., & MacLellan, W. R. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.03.034 · Cited by 445
Chitin and chitosan nanofibers: electrospinning of chitin and deacetylation of chitin nanofibers
Min, B.-M., Lee, S. W., Lim, J. N., You, Y., Lee, T. S., Kang, P. H., & Park, W. H. (2004) · Polymer · doi:10.1016/j.polymer.2004.08.048 · Cited by 445
Design and analysis of tissue engineering scaffolds that mimic soft tissue mechanical anisotropy
Courtney, T., Sacks, M. S., Stankus, J., Guan, J., & Wagner, W. R. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.02.024 · Cited by 416
Multifunctional Nanobiomaterials for Neural Interfaces
Abidian, M. R., & Martin, D. C. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801473 · Cited by 416
Aligned PLGA/HA nanofibrous nanocomposite scaffolds for bone tissue engineering
JOSE, M., THOMAS, V, JOHNSON, K., DEAN, D., & NYAIRO, E. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.07.019 · Cited by 390
High Flux Filtration Medium Based on Nanofibrous Substrate with Hydrophilic Nanocomposite Coating
Wang, X., Chen, X., Yoon, K., Fang, D., Hsiao, B. S., & Chu, B. (2005) · Environmental Science & Technology · doi:10.1021/es050512j · Cited by 381
Self-citationElectrospinning of chitosan solutions in acetic acid with poly(ethylene oxide)
Duan, B., Dong, C., Yuan, X., & Yao, K. (2004) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856204774196171 · Cited by 380
Xin, X., Hussain, M., & Mao, J. J. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.08.042 · Cited by 377
He, W., Yong, T., Teo, W. E., Ma, Z., & Ramakrishna, S. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1574 · Cited by 370
Biomaterials for tissue engineering of skin
MacNeil, S. (2008) · Materials Today · doi:10.1016/s1369-7021(08)70087-7 · Cited by 358
Sahoo, S., Ang, L. T., Goh, J. C., & Toh, S. (2010) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32645 · Cited by 346
Continuous yarns from electrospun fibers
Smit, E., Bűttner, U., & Sanderson, R. D. (2005) · Polymer · doi:10.1016/j.polymer.2005.02.002 · Cited by 343
Polymeric Nanofibers in Tissue Engineering
Dahlin, R. L., Kasper, F. K., & Mikos, A. G. (2011) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2011.0238 · Cited by 342
Cui, W., Li, X., Zhu, X., Yu, G., Zhou, S., & Weng, J. (2006) · Biomacromolecules · doi:10.1021/bm060057z · Cited by 342
Jiang, L., Zhao, Y., & Zhai, J. (2004) · Angewandte Chemie · doi:10.1002/ange.200460333 · Cited by 338
Sahoo, S., Ouyang, H., Goh, J. C.-H., Tay, T. E., & Toh, S. L. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.91 · Cited by 332
Myotube Assembly on Nanofibrous and Micropatterned Polymers
Huang, N. F., Patel, S., Thakar, R. G., Wu, J., Hsiao, B. S., Chu, B., Lee, R. J., & Li, S. (2006) · Nano Letters · doi:10.1021/nl060060o · Cited by 324
Self-citationNanostructured Biomaterials for Regeneration
Wei, G., & Ma, P. X. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200800662 · Cited by 298
You, Y., Min, B., Lee, S. J., Lee, T. S., & Park, W. H. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.21116 · Cited by 278
The Role of Electrospinning in the Emerging Field of Nanomedicine
Chew, S., Wen, Y., Dzenis, Y., & Leong, K. (2006) · Current Pharmaceutical Design · doi:10.2174/138161206779026326 · Cited by 277
A nanofibrous composite membrane of PLGA–chitosan/PVA prepared by electrospinning
Duan, B., Yuan, X., Zhu, Y., Zhang, Y., Li, X., Zhang, Y., & Yao, K. (2006) · European Polymer Journal · doi:10.1016/j.eurpolymj.2006.04.021 · Cited by 273
Ito, Y., Hasuda, H., Kamitakahara, M., Ohtsuki, C., Tanihara, M., Kang, I.-K., & Kwon, O. H. (2005) · Journal of Bioscience and Bioengineering · doi:10.1263/jbb.100.43 · Cited by 272
Fabrication aspects of PLA-CaP/PLGA-CaP composites for orthopedic applications: A review
Zhou, H., Lawrence, J. G., & Bhaduri, S. B. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.01.031 · Cited by 267
A review on the thermomechanical properties and biodegradation behaviour of polyesters
Larrañaga, A., & Lizundia, E. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.109296 · Cited by 257
Wang, X., Fang, D., Yoon, K., Hsiao, B. S., & Chu, B. (2006) · Journal of Membrane Science · doi:10.1016/j.memsci.2005.11.009 · Cited by 255
Self-citationAligned electrospun polymer fibres for skeletal muscle regeneration
School of Materials, B. G., Aviss, K., Gough, J., & Downes, S. (2010) · European Cells and Materials · doi:10.22203/ecm.v019a19 · Cited by 253
Deng, M., Kumbar, S. G., Nair, L. S., Weikel, A. L., Allcock, H. R., & Laurencin, C. T. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100275 · Cited by 143
Wang, T., Yang, X., Qi, X., & Jiang, C. (2015) · Journal of Translational Medicine · doi:10.1186/s12967-015-0499-8 · Cited by 83
Fundamental insights in PLGA degradation from thin film studies
Machatschek, R., & Lendlein, A. (2020) · Journal of Controlled Release · doi:10.1016/j.jconrel.2019.12.044 · Cited by 73
Sabbatier, G., Larrañaga, A., Guay‐Bégin, A., Fernandez, J., Diéval, F., Durand, B., Sarasua, J., & Laroche, G. (2015) · Macromolecular Bioscience · doi:10.1002/mabi.201500130 · Cited by 32
Metadata
- Authors
- Zong, X., Ran, S., Kim, K.-S., Fang, D., Hsiao, B. S., & Chu, B.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2003-02-15
- Volume
- 4
- Issue
- 2
- Pages
- 416-423
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2077211217
- Cited by
- 265
- References
- 26
- FWCI
- 9.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.