Stereocomplex Formation between Enantiomeric Poly(lactic acid)s. 12. Spherulite Growth of Low-Molecular-Weight Poly(lactic acid)s from the Melt
The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Abstract
The spherulite growth of stereocomplex crystallites in the blend from low-molecular-weight poly(L-lactide) [i.e., poly(L-lactic acid) (PLLA)] and poly(D-lactide) [i.e., poly(D-lactic acid) (PDLA)] from the melt, together with that of the homocrystallites in pure PLLA and PDLA films, was investigated using polarization optical miscroscopy. The spherulite growth of stereocomplex crystallites occurred at a wider temperature range (</=190 degrees C) compared with that of homocrystallites (</=140 degrees C). At 140 degrees C, the spherulite radius growth rate (G) for the stereocomplex crystallites (136.4 microm min(-1)) was an order of magnitude higher than those for the homocrystallites of PLLA (11.8 microm min(-1)) and PDLA (15.7 microm min(-1)), whereas the induction period was shorter for the spherulties of stereocomplex crystallites (0.0 min) than for the spherulties of homocrystallites of PLLA (2.6 min) and PDLA (0.7 min). In addition to these two factors, the higher spherulite density of stereocomplex crystallites compared with those of the homocrystallites of PLLA and PDLA resulted in rapid completion of overall crystallization of stereocomplex. The front factor (G(0)) and nucleation constant (K(g)) for the stereocomplex crystallites in the temperature range of 140-190 degrees C were estimated to be 3.56 x 10(12) microm min(-1) and 8.42 x 10(5) K(2), respectively. The G(0) value for stereocomplex crystallites was 1 and 2 orders of magnitude higher than those for the homocrystallites of PLLA (9.69 x 10(11) microm min(-1)) and PDLA (8.79 x 10(10) microm min(-1)), whereas the K(g) value for stereocomplex crystallites was twice those for the homocrystallites of PLLA (4.95 x 10(5) K(2)) and PDLA (4.20 x 10(5) K(2)).
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Properties are influenced by four levels of microstructure: the size of the crystals in the amorphous matrix, the interaction of neighboring chain segments, their symmetry, and defects.”
From Correlative characterization of stereocomplex formation in blends of aliphatic polyester P(PCL m - b -PLLA n ) multiblock-copolymers and PDLA (2026) · cites this paper as [18]
In the citing paper
“If we consider T m values reported in the literature, 55,58,60,61 then this critical value is apparently located at 30 -40kg/mol”
From Crystallization Kinetics and Morphology of Biodegradable Double Crystalline PLLA- b -PCL Diblock Copolymers (2010) · cites this paper as [60]
In the citing paper
“T m values can be strongly affected by molecular weight below a critical value.”
From Crystallization Kinetics and Morphology of Biodegradable Double Crystalline PLLA- b -PCL Diblock Copolymers (2010) · cites this paper as [60]
Citations
Cites
Biodegradable polyesters for medical and ecological applications
Ikada, Y., & Tsuji, H. (2000) · Macromolecular Rapid Communications · doi:10.1002/(sici)1521-3927(20000201)21:3<117::aid-marc117>3.0.co;2-x · Cited by 1,512
Self-citationStereocomplex formation between enantiomeric poly(lactides)
Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409
Self-citationStereocomplex Formation between Enantiomeric Poly(lactide)s
박은하, & 진인주 (2010) · 한국고분자학회 학술대회 연구논문 초록집 · Cited by 1,084
Biopolymers from Renewable Resources
(1998) · Springer eBooks · doi:10.1007/978-3-662-03680-8 · Cited by 982
Thermal characterization of polylactides
Jamshidi, K., Hyon, S.-H., & Ikada, Y. (1988) · Polymer · doi:10.1016/0032-3861(88)90116-4 · Cited by 692
Tsuji, H., & Ikada, Y. (1999) · Polymer · doi:10.1016/s0032-3861(99)00004-x · Cited by 545
Self-citationTsuji, H. (1995) · Polymer · doi:10.1016/0032-3861(95)93647-5 · Cited by 519
Self-citationStructure and thermal/mechanical properties of poly(l-lactide)-clay blend
Ogata, N., Jimenez, G., Kawai, H., & Ogihara, T. (1997) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/(sici)1099-0488(19970130)35:2<389::aid-polb14>3.0.co;2-e · Cited by 469
Biodegradable Plastics and Polymers
DOI, Y. (1994) · Journal of Pesticide Science · doi:10.1584/jpestics.19.s11 · Cited by 421
Crystallization kinetics of poly(l-lactic acid)
Vasanthakumari, R., & Pennings, A. J. (1983) · Polymer · doi:10.1016/0032-3861(83)90129-5 · Cited by 406
Research works printed but not linked: 20
- Slager J., 2001, Macromol. Symp.
- Tsuji H., 2000, India, 1, 48
- Tsuji, Polyesters 3 (Biopolymers, 177
- Coombes A. G. A., 1994, Clin. Mater., 17, 67
- Tsuji, H.; Ikada, Y. InCurrent Trends in Polymer Science; DeVries, K. L., et al., Eds.; Advisory Board, Research Trends: Trivandrum, India, 1999; Vol. 4, pp 27−46.
- Tsuji H., 2000, India, 4, 37
- Albertsson A.-C., Ed., 2002, Germany
- Tsuji H., 1993, Macromolecules, 26, 6926
- Fischer E. W., 1973, Kolloid Z. Z. Polym., 251, 90
- Kalb B., 1980, J. Polymer, 21, 612
- Miyata T., 1998, Polymer, 39, 21
- Huang J., 1998, Macromolecules, 31, 2599
- Abe H., 2001, Biomacromolecules, 2, 1014
- Duda A., 2000, Macromol. Symp.
- Kowalski A., 2000, Macromolecules, 33, 695
- Kowalski A., 2000, Macromolecules, 33, 7370
- Hoffman J. D., 1976, Treatise on Solid State Chemistry, vol 3: Crystalline and Noncrystalline solids
- Hoffman J. D., 1975, J. Res. Nat. Bur. Std-A. Phys. Chem., 79, 699
- Iannace S., 1996, J. Appl. Polym. Sci., 64, 919
- Loomis G. L., 1990, Polym. Prepr., 31, 55
Cited by
Items 101–194 of 194
Wanamaker, C. L., Tolman, W. B., & Hillmyer, M. A. (2009) · Macromolecular Symposia · doi:10.1002/masy.200950917 · Cited by 26
Tsuji, H., Yamasaki, M., & Arakawa, Y. (2021) · Macromolecules · doi:10.1021/acs.macromol.1c01099 · Cited by 25
Self-citationNucleation and crystal growth kinetics of poly(l-lactic acid) with self-assembled DBS nanofibrils
Lai, W., & Liao, J.-P. (2013) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2013.01.014 · Cited by 25
Crystal and Thermal Properties of PLLA/PDLA Blends Synthesized by Direct Melt Polycondensation
Chen, D., Li, J., & Ren, J. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0301-9 · Cited by 27
Recent advances in enhancing stereocomplexation between poly(lactide) enantiomeric chains
Guo, M., Wu, W., Wu, W., Wang, R., Huang, L., & Gao, Q. (2023) · Physical Chemistry Chemical Physics · doi:10.1039/d3cp01003a · Cited by 26
Yin, Y., Liu, G., Song, Y., Zhang, X., de Vos, S., Wang, R., Joziasse, C. A. P., & Wang, D. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.05.033 · Cited by 24
Li, Y., Han, C., Yu, Y., Xiao, L., & Shao, Y. (2017) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-017-6783-5 · Cited by 24
Guo, M., Wu, W., Wu, W., & Gao, Q. (2022) · ACS Omega · doi:10.1021/acsomega.2c05198 · Cited by 25
Liu, T., Xiang, F., Qi, X., Yang, W., Huang, R., & Fu, Q. (2017) · Polymer · doi:10.1016/j.polymer.2017.08.047 · Cited by 24
Li, Y., Han, C., Yu, Y., Xiao, L., & Shao, Y. (2018) · Thermochimica Acta · doi:10.1016/j.tca.2018.03.011 · Cited by 24
He, Y., Wu, T. S., Wei, J., Fan, Z., & Li, S. (2008) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21430 · Cited by 24
Tsuji, H., Deguchi, F., Sakamoto, Y., & Shimizu, S. (2012) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201200395 · Cited by 24
Self-citationTsuji, H., Tashiro, K., Bouapao, L., & Hanesaka, M. (2012) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201200208 · Cited by 26
Self-citationTsuji, H., & Matsumura, N. (2016) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201600042 · Cited by 24
Self-citationCrystallization and Stereocomplexation of PLA-mb-PBS Multi-Block Copolymers
D’Ambrosio, R., Michell, R., Mincheva, R., Hernández, R., Mijangos, C., Dubois, P., & Müller, A. (2017) · Polymers · doi:10.3390/polym10010008 · Cited by 22
Xue, S., Jia, P., Ren, Q., Liu, X., Lee, R. E., Jr., & Zhai, W. (2016) · Journal of Cellular Plastics · doi:10.1177/0021955x16670587 · Cited by 23
“This idea seems reasonable because PLA SC presents at much higher cold crystallization temperature than that of PLLA, so PLA SC cannot develop during the CO2 saturation at low temperature.(11,35) The in-situ crystallization of PLA SC will be beneficial for the Xue et al.”
BackgroundJiang, L., Lv, P., Ma, P., Bai, H., Dong, W., & Chen, M. (2015) · RSC Advances · doi:10.1039/c5ra12586c · Cited by 22
Crystallization of Poly(lactic acid)
Lorenzo, M. L. D., & Androsch, R. (2015) · Wiley eBooks · doi:10.1002/9783527656950.ch5 · Cited by 32
Biodegradation and hydrolysis studies on polypropylene/polylactide/organo-clay nanocomposites
Ebadi‐Dehaghani, H., Barikani, M., Borhani, S., Bolvardi, B., Khonakdar, H. A., Jafari, S. H., & Aarabi, A. (2016) · Polymer Bulletin · doi:10.1007/s00289-016-1655-x · Cited by 21
Feng, Y., Lv, P., Jiang, L., Ma, P., Chen, M., Dong, W., & Chen, Y. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.10.002 · Cited by 21
Bibi, G., Jung, Y., Lim, J., & Kim, S. H. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00446 · Cited by 19
Strain-induced structural evolution of Poly(l-lactide) and Poly(d-lactide) blends
Stoclet, G. (2016) · Polymer · doi:10.1016/j.polymer.2016.07.019 · Cited by 19
Wu, T. S., He, Y., Fan, Z., Wei, J., & Li, S. (2007) · Polymer Engineering and Science · doi:10.1002/pen.20955 · Cited by 21
Tsuji, H., Ogawa, M., & Arakawa, Y. (2016) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.6b07987 · Cited by 19
Self-citationMiscibility, morphology, and properties of poly(butylene succinate)/poly(vinyl acetate) blends
Li, Y., Han, C., Xiao, L., Yu, Y., Zhou, G., & Xu, M. (2020) · Colloid & Polymer Science · doi:10.1007/s00396-020-04773-7 · Cited by 18
Concomitant Crystallization and Cross-Nucleation in Polymorphic Polymers
Cavallo, D., & Alfonso, G. C. (2015) · Advances in polymer science · doi:10.1007/12_2015_330 · Cited by 20
Stereocomplex Formation from Enantiomeric Polyamides Derived from Tartaric Acid
Marín, R., Alla, A., & Muñoz‐Guerra, S. (2006) · Macromolecular Rapid Communications · doi:10.1002/marc.200600410 · Cited by 19
Chen, Q., Auras, R. A., Kirkensgaard, J. J. K., & Uysal‐Unalan, I. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c12602 · Cited by 17
Li, S., & Woo, E. M. (2009) · Polymer Journal · doi:10.1295/polymj.pj2008198 · Cited by 17
Isothermal crystallization kinetics of poly(lactic acid)/synthetic mica nanocomposites
Souza, D. H. S., Andrade, C. T., & Dias, M. L. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40322 · Cited by 18
High surface area carbon black (BP‐2000) as a reinforcing agent for poly[(−)‐lactide]
Delgado, P. A., Brutman, J. P., Masica, K., Molde, J. S., Wood, B. M., & Hillmyer, M. A. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43926 · Cited by 18
Towards Self-Reinforced PLA Composites for Fused Filament Fabrication
Yadav, N., Richter, T., Löschke, O., Abali, B. E., Auhl, D. W., & Völlmecke, C. (2023) · Applied Sciences · doi:10.3390/app13042637 · Cited by 16
Tsuji, H., Masaki, N., Arakawa, Y., Iguchi, K., & Sobue, T. (2018) · Crystal Growth & Design · doi:10.1021/acs.cgd.7b01559 · Cited by 16
Self-citationHighlight of primary and secondary relaxations in amorphous stereocomplex polylactides
Varol, N., Monnier, X., Delbreilh, L., Saiter, A., Fatyeyeva, K. Y., & Dargent, É. (2019) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2020.5 · Cited by 17
Long terminal linear alkyl group as internal crystallization accelerating moiety of poly(l-lactide)
Tsuji, H., & Sugimoto, S. (2014) · Polymer · doi:10.1016/j.polymer.2014.07.012 · Cited by 16
Self-citationGardella, L., Cavallo, D., Colonna, S., Fina, A., & Monticelli, O. (2014) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.27389 · Cited by 16
Xu, S., Li, X., Sun, C., Ni, L., Xu, W., Yuan, W., Zheng, Y., Yu, C., & Pan, P. (2021) · Polymer · doi:10.1016/j.polymer.2021.124148 · Cited by 14
Lamellar and spherulitic crystallization of poly(s-2-hydroxybutanoic acid) and its stereocomplexes
Ghanbari, A., & Prud'homme, R. E. (2017) · Polymer · doi:10.1016/j.polymer.2017.02.018 · Cited by 14
Wang, L., Feng, C., Zhou, D., Shao, J., Hou, H., & Li, G. (2018) · Polymer Crystallization · doi:10.1002/pcr2.10006 · Cited by 17
Stereocomplex-affected crystallization behaviour of PDLA in PDLA/PLDLA blends
Cheng, L., Hu, C., Li, J., Huang, S., & Jiang, S. (2018) · CrystEngComm · doi:10.1039/c8ce01934g · Cited by 15
Wang, L., Lu, J., Zhang, P., Su, J., & Han, J. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.129976 · Cited by 13
Furuhashi, Y., Morioka, K., Tamegai, H., & Yoshie, N. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.37533 · Cited by 14
Hydrogel formation by the ‘topological conversion’ of cyclic PLA–PEO block copolymers
Yamamoto, T., Inoue, K., & Tezuka, Y. (2016) · Polymer Journal · doi:10.1038/pj.2015.134 · Cited by 13
Self-citationNano‐Crystalline Sandwich Formed in Polylactic Acid Fibers
Zhao, R., He, H., Cai, M., Miao, D., Yuan, D., Ming, J., Wang, N., & Ning, X. (2019) · Macromolecular Rapid Communications · doi:10.1002/marc.201900492 · Cited by 13
Accelerated Laboratory Weathering of Polypropylene/Poly (Lactic Acid) Blends
Zhou, Q., Liu, X., Lu, Y., Dao, X., & Qiu, L. (2022) · Polymers · doi:10.3390/polym15010017 · Cited by 13
Samsuri, M., & Purnama, P. (2023) · Polymers · doi:10.3390/polym15122730 · Cited by 12
Ni’mah, H., Woo, E. M., & Chang, S. (2014) · RSC Advances · doi:10.1039/c4ra09859e · Cited by 12
Chen, W.-S., Zhong, C., Li, S., Wen, D., Zhou, D., Shao, J., Chen, S., Hou, H., & Xiang, S. (2023) · Journal of Polymers and the Environment · doi:10.1007/s10924-023-02985-w · Cited by 12
Nanostructures of Stereocomplex Polylactide in Poly( l -lactide) Doped with Poly( d -lactide)
Huang, W., Luo, X.-Z., Wang, B., Wei, W., Chen, P., Gu, Q., de Vos, S., Wang, R., & Joziasse, C. A. P. (2015) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201500050 · Cited by 12
Effect of Metallic Salts of Phenylmalonic Acid on the Crystallization of Poly(L-lactide)
Li, C., & Dou, Q. (2015) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2015.1125050 · Cited by 12
Luo, C., Yang, M., Xiao, W., Yang, J., Wang, Y., Chen, W., & Han, X. (2017) · Polymer International · doi:10.1002/pi.5506 · Cited by 13
Synthetic biodegradable medical polyesters
Li, S. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100372-5.00002-7 · Cited by 15
The morphology and growth of PLA stereocomplex in PLLA/PDLA blends with low molecular weights
Shao, J., Guo, Y., Ye, S., Xie, B., Xu, Y., & Hou, H. (2017) · Polymer Science Series A · doi:10.1134/s0965545x1701014x · Cited by 12
Guo, N., Zhao, M., Li, S., Hao, J., Wu, Z., & Zhang, C. (2022) · Polymers · doi:10.3390/polym14030645 · Cited by 10
Tsuji, H., & Sugimoto, S. (2015) · Macromolecular Materials and Engineering · doi:10.1002/mame.201400401 · Cited by 10
Self-citationCrystallizability of substituted poly(lactic acid)s: Effects of alkyl side-chain structure
Marubayashi, H., Mizukami, R., Hamada, Y., & Nojima, S. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.04.033 · Cited by 9
Structure Mediation and Properties of Poly(l-lactide)/Poly(d-lactide) Blend Fibers
Yang, B., Wang, R., Ma, H., Li, X., Brünig, H., Dong, Z., Qi, Y., & Zhang, X. (2018) · Polymers · doi:10.3390/polym10121353 · Cited by 9
Li, W., Wang, M., Luo, H., Niu, Y., Huang, Y., & Li, G. (2021) · Polymer · doi:10.1016/j.polymer.2021.123519 · Cited by 9
Stereocomplexation Between Enantiomeric Poly(lactide)s
Tsuji, H., & Ikada, Y. (2008) · Wiley eBooks · doi:10.1002/9780470391501.ch7 · Cited by 12
Self-citationJullin, A., Sudre, G., Hascoët, N., Chinesta, F., & Espuche, E. (2025) · Polymer Testing · doi:10.1016/j.polymertesting.2024.108682 · Cited by 8
Liu, P., Chen, X., & Ye, H. (2017) · Polymers · doi:10.3390/polym9110592 · Cited by 8
Malayarom, P., Pongpakdee, C., & Pattamaprom, C. (2023) · Composites Part C Open Access · doi:10.1016/j.jcomc.2023.100391 · Cited by 8
Tsuji, H., Sato, S., Masaki, N., Arakawa, Y., Yoshizaki, Y., Kuzuya, A., & Ohya, Y. (2019) · Polymer Crystallization · doi:10.1002/pcr2.10094 · Cited by 9
Self-citationMandlule, A., Liu, Y., Schwanz, S., Pieper, Y., Scharf, H., Iskhakova, K., Conceição, A. L. C., Wieland, D. C. F., Zeller-Plumhoff, B., Toma, F. M., et al. (2026) · Materials Advances · doi:10.1039/d5ma00886g · Cited by 6
Tien, N.-D., & Prud'homme, R. E. (2017) · Polymer · doi:10.1016/j.polymer.2017.03.058 · Cited by 6
Self-Nucleation Efficiency of PDLA in PLAs: Crystallization Behavior and Morphology
Zou, G., Qu, X., Zhao, C., He, Y., & Li, J. (2018) · Polymer Science Series A · doi:10.1134/s0965545x18020165 · Cited by 6
Wang, L., Lu, J., Su, J., Han, J., & Wang, Y. (2025) · Polymer · doi:10.1016/j.polymer.2025.128460 · Cited by 4
Sun, M., Liu, J., Yu, M., Yan, W., & Han, K. (2024) · Polymer · doi:10.1016/j.polymer.2024.127436 · Cited by 6
Park, S. J., Lim, H., Lee, S. J., Im, S. H., Lee, J. M., Jung, Y., Kim, S. H., Shim, J.-S., Won, J., Chung, J. J., et al. (2025) · Biomacromolecules · doi:10.1021/acs.biomac.4c01768 · Cited by 7
Mahmoud, N. H. M., Takagi, H., Shimizu, N., Igarashi, N., & Sakurai, S. (2024) · Polymer Journal · doi:10.1038/s41428-024-00919-4 · Cited by 7
“Since at lower temperatures HC formation is promoted over SC [28, 29], there was a need to examine the effects of OMG at T c = 160 °C, while at a higher T c , that is T c = 180 °C, the effect of OMG can be observed on SC only without the interference of HC formation, even with a long duration of 5…”
Xu, N., Wang, X., Pan, L. S., Pang, S. J., Chen, X., Yang, S. Y., & Lin, Q. (2014) · Advanced materials research · doi:10.4028/www.scientific.net/amr.887-888.716 · Cited by 5
Matsui, H., Tada, Y., Fushimi, R., Fujita, S., Ito, M., Kawabe, T., Ozeki, E., & Ajiro, H. (2017) · Materials Today Communications · doi:10.1016/j.mtcomm.2017.04.004 · Cited by 6
Xu, R., Tian, Z., Xie, J., & Lei, C. (2019) · Polymer Crystallization · doi:10.1002/pcr2.10072 · Cited by 5
Xu, H., Tang, S., Chen, J., & Chen, N. (2014) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2014.912326 · Cited by 4
WITHDRAWN: PLA Stereocomplexes: A Decade of Progress
Tsuji, H. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2015.12.025 · Cited by 4
Self-citationRetractedAdvanced thermal analysis and transport properties of stereocomplex polylactide
Varol, N. (2019) · theses.fr (ABES) · doi:10.70675/1d440cf0z61a8z49a3z8b00z27de14f053a1 · Cited by 10
Data driven modelling as a new route to design PLA based materials with improved barrier properties
Jullin, A., Hascoët, N., Chinesta, F., & Espuche, É. (2025) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2025.101481 · Cited by 3
Tsuji, H., Osanai, K., & Arakawa, Y. (2021) · Polymer · doi:10.1016/j.polymer.2021.124352 · Cited by 3
Self-citationNagarajan, S., Li, H., Woo, E. M., Chuang, W., & Tsai, Y. W. (2022) · Macromolecular Chemistry and Physics · doi:10.1002/macp.202200114 · Cited by 2
POxylated stereocomplexes from PEtOx-b-PLA diblock copolymers
Stafast, L. M., Swieczkowski, M., Poudel, P., Engel, N., Yin, C., Scheuer, K., Weber, C., Schacher, F. H., Jandt, K. D., & Schubert, U. S. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.113545 · Cited by 2
“[35] The dried and purified PLA and PEtOx-b -PLA homo and diblock copolymers were dissolved separately in chloroform to yield a concentration of 5 mg mL (cid:0) 1 .”
CRYSTALLIZATION STRUCTURES AND THERMAL PROPERTIES OF HIGH HEAT-RESISTANCE PLLA/PDLA BLENDS
Lu, C., Tang, S., Ji, X., Wen-liang, P., & Li, R. (2013) · Acta Polymerica Sinica · doi:10.3724/sp.j.1105.2013.12339 · Cited by 2
Ray, S. S., & Banerjee, R. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-85868-7.00004-4 · Cited by 2
Xu, L., & Zhao, Y. Q. (2018) · International Polymer Processing · doi:10.3139/217.3492 · Cited by 2
“…with homo-crystallites (Fukushima and Kimura, 2006; Ikada et al., 1987; Kakuta, 2009; Li and Han, 2012; Li et al., 2016; Lin et al., 2010; Rathi, 2012; Saravanan and Domb, 2013; Sasaki and Asakura, 2003; Tsuji, 2005; 2016; Tsuji and Fukui, 2003; Tsuji and Ikada, 1993; 1999; Tsuji and Tezuka, 2004).”
BackgroundPhase Separation Pathways of Chiral Macromolecules at Liquid–Liquid Interfaces
Chen, X., Yang, Y., Wen, Y., Shi, S., & Shi, W. (2025) · Langmuir · doi:10.1021/acs.langmuir.5c01533 · Cited by 1
Dimonie, D., Mathe, S., Trusca, R. D., Damian, C. M., Dumitru, Ş., & Oancea, F. (2026) · Journal of Composites Science · doi:10.3390/jcs10020092 · Cited by 3
Research progress on performance optimization of PLA foam materials
Liao, X., Lu, J., Liu, J., & Chen, Y. (2026) · Materials Today Communications · doi:10.1016/j.mtcomm.2026.115005 · Cited by 3
Crystallization behavior of stereoblock polylactide with high sequence regularity structure
Ye, W., Qi, X., Dongyang, L., Gao, S., Fan, Z., & Liu, Q. (2022) · Polymers for Advanced Technologies · doi:10.1002/pat.5867 · Cited by 1
The sunken morphology of poly(lactic acid) stereocomplex spherulite
Liu, Y., Zhang, M., Wei, H., Wang, Z., Zeng, J., & Li, Q. (2019) · Polymer International · doi:10.1002/pi.5861
Tailoring the Crystalline Structure of Stereocomplex PLA Foams for Technical ApplicationsPreprint
Rinberg, R., Becker, H., Schneebauer, M., Hartmann, T., & Kroll, L. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6276773
PLA stereo-block copolymer : from synthesis to the biomedical application
Moya‐López, C. (2022) · theses.fr (ABES) · doi:10.70675/6c6cf0b2z55b8z4ed6z8defzeff9f1967bac · Cited by 1
Wu, R., Zhou, J., & Chen, X. L. (2026) · Journal of Polymer Science · doi:10.1002/pola.70336
Metadata
- Authors
- Tsuji, H., & Tezuka, Y.
- Affiliations
- Toyohashi University of Technology (JP)
- ORCID
- Tsuji, Hideto
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-06-12
- Volume
- 5
- Issue
- 4
- Pages
- 1181-1186
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2037796182
- Cited by
- 194
- References
- 30
- Citations by year
- 2026: 4 · 2025: 7 · 2024: 6 · 2023: 6 · 2022: 8 · 2021: 8 · 2020: 3 · 2019: 8 · 2018: 7 · 2017: 13 · 2016: 16 · 2015: 18 · 2014: 11 · 2013: 13 · 2012: 14
- FWCI
- 5.61
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Materials Chemistry › Crystallization and Solubility Studies
- Keywords
- stereocomplex formation, poly(L-lactic acid), poly(D-lactide), spherulite growth, melt crystallization, crystallization kinetics, stereocomplex crystallites, induction period, polymer blends, stereocomplex polymers
- MeSH terms
- Biocompatible Materials, Crystallization, Molecular Weight, Photomicrography, Polyesters, Polymers, Stereoisomerism, Temperature, Lactic Acid, Macromolecular Substances
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.