Stereocomplex Formation between Enantiomeric Poly(lactic acid)s. 12. Spherulite Growth of Low-Molecular-Weight Poly(lactic acid)s from the Melt
The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Abstract
The spherulite growth of stereocomplex crystallites in the blend from low-molecular-weight poly(L-lactide) [i.e., poly(L-lactic acid) (PLLA)] and poly(D-lactide) [i.e., poly(D-lactic acid) (PDLA)] from the melt, together with that of the homocrystallites in pure PLLA and PDLA films, was investigated using polarization optical miscroscopy. The spherulite growth of stereocomplex crystallites occurred at a wider temperature range (</=190 degrees C) compared with that of homocrystallites (</=140 degrees C). At 140 degrees C, the spherulite radius growth rate (G) for the stereocomplex crystallites (136.4 microm min(-1)) was an order of magnitude higher than those for the homocrystallites of PLLA (11.8 microm min(-1)) and PDLA (15.7 microm min(-1)), whereas the induction period was shorter for the spherulties of stereocomplex crystallites (0.0 min) than for the spherulties of homocrystallites of PLLA (2.6 min) and PDLA (0.7 min). In addition to these two factors, the higher spherulite density of stereocomplex crystallites compared with those of the homocrystallites of PLLA and PDLA resulted in rapid completion of overall crystallization of stereocomplex. The front factor (G(0)) and nucleation constant (K(g)) for the stereocomplex crystallites in the temperature range of 140-190 degrees C were estimated to be 3.56 x 10(12) microm min(-1) and 8.42 x 10(5) K(2), respectively. The G(0) value for stereocomplex crystallites was 1 and 2 orders of magnitude higher than those for the homocrystallites of PLLA (9.69 x 10(11) microm min(-1)) and PDLA (8.79 x 10(10) microm min(-1)), whereas the K(g) value for stereocomplex crystallites was twice those for the homocrystallites of PLLA (4.95 x 10(5) K(2)) and PDLA (4.20 x 10(5) K(2)).
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Properties are influenced by four levels of microstructure: the size of the crystals in the amorphous matrix, the interaction of neighboring chain segments, their symmetry, and defects.”
From Correlative characterization of stereocomplex formation in blends of aliphatic polyester P(PCL m - b -PLLA n ) multiblock-copolymers and PDLA (2026) · cites this paper as [18]
In the citing paper
“If we consider T m values reported in the literature, 55,58,60,61 then this critical value is apparently located at 30 -40kg/mol”
From Crystallization Kinetics and Morphology of Biodegradable Double Crystalline PLLA- b -PCL Diblock Copolymers (2010) · cites this paper as [60]
In the citing paper
“T m values can be strongly affected by molecular weight below a critical value.”
From Crystallization Kinetics and Morphology of Biodegradable Double Crystalline PLLA- b -PCL Diblock Copolymers (2010) · cites this paper as [60]
Citations
Cites
Biodegradable polyesters for medical and ecological applications
Ikada, Y., & Tsuji, H. (2000) · Macromolecular Rapid Communications · doi:10.1002/(sici)1521-3927(20000201)21:3<117::aid-marc117>3.0.co;2-x · Cited by 1,512
Self-citationStereocomplex formation between enantiomeric poly(lactides)
Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409
Self-citationStereocomplex Formation between Enantiomeric Poly(lactide)s
박은하, & 진인주 (2010) · 한국고분자학회 학술대회 연구논문 초록집 · Cited by 1,084
Biopolymers from Renewable Resources
(1998) · Springer eBooks · doi:10.1007/978-3-662-03680-8 · Cited by 982
Thermal characterization of polylactides
Jamshidi, K., Hyon, S.-H., & Ikada, Y. (1988) · Polymer · doi:10.1016/0032-3861(88)90116-4 · Cited by 692
Tsuji, H., & Ikada, Y. (1999) · Polymer · doi:10.1016/s0032-3861(99)00004-x · Cited by 545
Self-citationTsuji, H. (1995) · Polymer · doi:10.1016/0032-3861(95)93647-5 · Cited by 519
Self-citationStructure and thermal/mechanical properties of poly(l-lactide)-clay blend
Ogata, N., Jimenez, G., Kawai, H., & Ogihara, T. (1997) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/(sici)1099-0488(19970130)35:2<389::aid-polb14>3.0.co;2-e · Cited by 469
Biodegradable Plastics and Polymers
DOI, Y. (1994) · Journal of Pesticide Science · doi:10.1584/jpestics.19.s11 · Cited by 421
Crystallization kinetics of poly(l-lactic acid)
Vasanthakumari, R., & Pennings, A. J. (1983) · Polymer · doi:10.1016/0032-3861(83)90129-5 · Cited by 406
Research works printed but not linked: 20
- Slager J., 2001, Macromol. Symp.
- Tsuji H., 2000, India, 1, 48
- Tsuji, Polyesters 3 (Biopolymers, 177
- Coombes A. G. A., 1994, Clin. Mater., 17, 67
- Tsuji, H.; Ikada, Y. InCurrent Trends in Polymer Science; DeVries, K. L., et al., Eds.; Advisory Board, Research Trends: Trivandrum, India, 1999; Vol. 4, pp 27−46.
- Tsuji H., 2000, India, 4, 37
- Albertsson A.-C., Ed., 2002, Germany
- Tsuji H., 1993, Macromolecules, 26, 6926
- Fischer E. W., 1973, Kolloid Z. Z. Polym., 251, 90
- Kalb B., 1980, J. Polymer, 21, 612
- Miyata T., 1998, Polymer, 39, 21
- Huang J., 1998, Macromolecules, 31, 2599
- Abe H., 2001, Biomacromolecules, 2, 1014
- Duda A., 2000, Macromol. Symp.
- Kowalski A., 2000, Macromolecules, 33, 695
- Kowalski A., 2000, Macromolecules, 33, 7370
- Hoffman J. D., 1976, Treatise on Solid State Chemistry, vol 3: Crystalline and Noncrystalline solids
- Hoffman J. D., 1975, J. Res. Nat. Bur. Std-A. Phys. Chem., 79, 699
- Iannace S., 1996, J. Appl. Polym. Sci., 64, 919
- Loomis G. L., 1990, Polym. Prepr., 31, 55
Cited by
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200500062 · Cited by 1,366
Self-citationEffect of nucleation and plasticization on the crystallization of poly (lactic acid)
Li, H., & Huneault, M. A. (2007) · Polymer · doi:10.1016/j.polymer.2007.09.020 · Cited by 810
Poly(lactic acid) stereocomplexes: A decade of progress
Tsuji, H. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.017 · Cited by 535
Self-citationTsuji, H., Takai, H., & Saha, S. K. (2006) · Polymer · doi:10.1016/j.polymer.2006.03.074 · Cited by 353
Self-citationTan, B. H., Muiruri, J. K., Li, Z., & He, C. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b01713 · Cited by 247
Nonisothermal cold crystallization behavior and kinetics of polylactide/clay nanocomposites
Wu, D., Wu, L., Wu, L., Xu, B., Zhang, Y., & Zhang, M. (2007) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.21154 · Cited by 202
Isothermal cold crystallization kinetics of polylactide/nucleating agents
Liao, R., Yang, B., Yu, W., & Zhou, C. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.25733 · Cited by 199
Polylactic acid production from biotechnological routes: A review
de Albuquerque, T. L., Marques Júnior, J. E., de Queiroz, L. P., Ricardo, A. D. S., & Rocha, M. V. P. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.07.074 · Cited by 188
Castillo, R. V., Müller, A. J., Raquez, J.-M., & Dubois, P. (2010) · Macromolecules · doi:10.1021/ma100201g · Cited by 175
Stereoblock Polylactides as High-Performance Bio-Based Polymers
Kakuta, M., Hirata, M., & Kimura, Y. (2009) · Polymer Reviews · doi:10.1080/15583720902834825 · Cited by 166
“32 , 37 , 38 This faster crystallization is attributed to the extremely high growth rate of its spherulites, although its control has remained a challenge considering the fact that sc-PLA can concurrently nucleate hc crystals.”
BackgroundCrystallization Behavior of Polylactide/Graphene Composites
Wu, D., Cheng, Y., Feng, S., Yao, Z., & Zhang, M. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4004199 · Cited by 160
Bao, R.-Y., Yang, W., Wei, X.-F., Xie, B.-H., & Yang, M.-B. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500464c · Cited by 152
He, Y., Xu, Y., Wei, J., Fan, Z., & Li, S. (2008) · Polymer · doi:10.1016/j.polymer.2008.10.028 · Cited by 138
Spherulite growth of l-lactide copolymers: Effects of tacticity and comonomers
Tsuji, H., Tezuka, Y., Saha, S. K., Suzuki, M., & Itsuno, S. (2005) · Polymer · doi:10.1016/j.polymer.2005.03.069 · Cited by 146
Self-citationFuruhashi, Y., Kimura, Y., Yoshie, N., & Yamane, H. (2006) · Polymer · doi:10.1016/j.polymer.2006.06.001 · Cited by 127
Crystallization Behavior of Asymmetric PLLA/PDLA Blends
Sun, J., Yu, H., Zhuang, X., Chen, X., & Jing, X. (2011) · The Journal of Physical Chemistry B · doi:10.1021/jp111894m · Cited by 124
Evidence of a dual network/spherulitic crystalline morphology in PLA stereocomplexes
Saeidlou, S., Huneault, M. A., Li, H., Sammut, P., & Park, C. B. (2012) · Polymer · doi:10.1016/j.polymer.2012.10.030 · Cited by 120
Andersson, S. R., Hakkarainen, M., Inkinen, S., Södergård, A., & Albertsson, A. (2012) · Biomacromolecules · doi:10.1021/bm300196h · Cited by 115
Song, P., Chen, G., Wei, Z., Chang, Y., Zhang, W., & Liang, J. (2012) · Polymer · doi:10.1016/j.polymer.2012.07.032 · Cited by 113
Samuel, C., Cayuela, J., Barakat, I., Müller, A. J., Raquez, J.-M., & Dubois, P. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am403443m · Cited by 108
Bao, R., Yang, W. M., Jiang, W., Liu, Z., Xie, B., & Yang, M. (2013) · The Journal of Physical Chemistry B · doi:10.1021/jp311878f · Cited by 106
Crystallization and biodegradation of polylactide/carbon nanotube composites
Wu, D., Wu, L., Zhou, W., Zhang, M., & Yang, T. (2010) · Polymer Engineering & Science · doi:10.1002/pen.21695 · Cited by 97
He, C., Sun, J., Zhao, T., Hong, Z., Zhuang, X., Chen, X., & Jing, X. (2006) · Biomacromolecules · doi:10.1021/bm050627f · Cited by 97
A mini review on the functional biomaterials based on poly (lactic acid) stereocomplex
Jing, Y., Quan, C., Liu, B., Jiang, Q., & Zhang, C. (2016) · Polymer Reviews · doi:10.1080/15583724.2015.1111380 · Cited by 92
High-Tg carbazole derivatives as a new class of aggregation-induced emission enhancement materials
Yang, Z., Chi, Z., Xu, B., Li, H., Zhang, X., Li, X., Liu, S., Zhang, Y., & Xu, J. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00712a · Cited by 92
Water Vapor Permeability of Poly(L‐lactide)/Poly(D‐lactide) Stereocomplexes
Tsuji, H., & Tsuruno, T. (2010) · Macromolecular Materials and Engineering · doi:10.1002/mame.201000071 · Cited by 91
Self-citationLuo, F., Fortenberry, A. W., Ren, J., & Qiang, Z. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2020.00688 · Cited by 95
“Conventional methods for polymer processing such as melt blowing and injection molding require a high processing temperature (220– 260◦C) and often yield a relatively low SC content for commercial high molecular weight (MW) PLA (Katti and Schultz, 1982; Tsuji and Tezuka, 2004; Tsuji, 2016).”
MethodBouapao, L., & Tsuji, H. (2009) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200900017 · Cited by 90
Self-citationTsuji, H., & YAMAMOTO, S. (2011) · Macromolecular Materials and Engineering · doi:10.1002/mame.201000397 · Cited by 90
Self-citationCrystallization modification of poly(lactide) by using nucleating agents and stereocomplexation
Jiang, L., Shen, T., Xu, P., Zhao, X., Li, X., Dong, W., Ma, P., & Chen, M. (2015) · e-Polymers · doi:10.1515/epoly-2015-0179 · Cited by 94
Quan, H., Zhang, S., Qiao, J., & Zhang, L. (2012) · Polymer · doi:10.1016/j.polymer.2012.07.061 · Cited by 87
Park, H.-S., & Hong, C.-K. (2021) · Polymers · doi:10.3390/polym13111851 · Cited by 85
He, C., Sun, J., Ma, J., Chen, X., & Jing, X. (2006) · Biomacromolecules · doi:10.1021/bm060578m · Cited by 85
Xiong, Z., Liu, G., Zhang, X., Wen, T., de Vos, S., Joziasse, C., & Wang, D. (2013) · Polymer · doi:10.1016/j.polymer.2012.11.076 · Cited by 83
Tsuji, H., Wada, T., Sakamoto, Y., & Sugiura, Y. (2010) · Polymer · doi:10.1016/j.polymer.2010.08.010 · Cited by 87
Self-citationGÜMÜŞ, S., Özkoç, G., & Aytaç, A. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.34841 · Cited by 85
Sakamoto, Y., & Tsuji, H. (2013) · Polymer · doi:10.1016/j.polymer.2013.02.044 · Cited by 81
Self-citationTsuji, H., & Okumura, A. (2009) · Macromolecules · doi:10.1021/ma9015483 · Cited by 79
Self-citationZhang, H., Ming, R., Yang, G., Li, Y., Li, Q., & Shao, H. (2015) · Polymer Engineering & Science · doi:10.1002/pen.24147 · Cited by 74
Sakamoto, Y., & Tsuji, H. (2013) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201200657 · Cited by 79
Self-citationPoly( L ‐lactide) crystallization induced by multiwall carbon nanotubes at very low loading
Hong-sheng, X., Dai, X. J., Lamb, P. R., & Li, Z. (2009) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21830 · Cited by 83
de Oliveira, J. E., de Moraes, E. A. B., Marconcini, J. M., Mattoso, L. H. C., Glenn, G. M., & Medeiros, E. S. D. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39061 · Cited by 77
Wang, S., Han, C., Bian, J., Han, L., Wang, X., & Dong, L. (2010) · Polymer International · doi:10.1002/pi.2947 · Cited by 80
He, Y. Q., Fan, Z., Wei, J., & Li, S. (2006) · Polymer Engineering and Science · doi:10.1002/pen.20617 · Cited by 75
Tsuji, H., Yamamoto, S., Okumura, A., & Sugiura, Y. (2010) · Biomacromolecules · doi:10.1021/bm901113v · Cited by 66
Self-citationThermal Properties and Structural Evolution of Poly( l -lactide)/Poly( d -lactide) Blends
Feng, L., Bian, X., Li, G., & Chen, X. (2021) · Macromolecules · doi:10.1021/acs.macromol.1c01866 · Cited by 63
Jia, P., Hu, J., Zhai, W., Duan, Y., Zhang, J., & Han, C. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/ie504345y · Cited by 66
Multiple melting behavior of poly(lactic acid) filled with modified carbon black
Su, Z., Li, Q., Liu, Y., Hu, G., & Wu, C. (2009) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.21790 · Cited by 62
Higher order structural analysis of stereocomplex‐type poly(lactic acid) melt‐spun fibers
Furuhashi, Y., Kimura, Y., & Yamane, H. (2007) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.21035 · Cited by 62
Li, Y., & Han, C. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie302447e · Cited by 62
Homocomposites of Polylactide (PLA) with Induced Interfacial Stereocomplex Crystallites
Arias, V., Odelius, K., Höglund, A., & Albertsson, A. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00498 · Cited by 61
Banded Spherulites in PS−PLLA Chiral Block Copolymers
Chao, C.-C., Chen, C.-K., Chiang, Y.-W., & Ho, R. (2008) · Macromolecules · doi:10.1021/ma702416n · Cited by 62
Li, C., Dou, Q., Bai, Z., & Lu, Q. (2015) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-015-4677-y · Cited by 61
Bandelli, D., Alex, J., Weber, C., & Schubert, U. S. (2019) · Macromolecular Rapid Communications · doi:10.1002/marc.201900560 · Cited by 64
As’habi, L., Jafari, S. H., Khonakdar, H. A., Häußler, L., Wagenknecht, U., & Heinrich, G. (2013) · Thermochimica Acta · doi:10.1016/j.tca.2013.04.016 · Cited by 62
Wang, L., & Dong, C. (2006) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.21330 · Cited by 63
Tsuji, H., & Bouapao, L. (2012) · Polymer International · doi:10.1002/pi.3219 · Cited by 59
Self-citationLi, J., Chen, D., Gui, B., Gu, M., & Ren, J. (2010) · Polymer Bulletin · doi:10.1007/s00289-010-0419-2 · Cited by 57
Yuan, H., Zhou, Y., Lee, M., Zhang, Y., & Li, W. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.06.034 · Cited by 58
Crystallization behavior of linear 1-arm and 2-arm poly(l-lactide)s: Effects of coinitiators
Tsuji, H., Sugiura, Y., Sakamoto, Y., Bouapao, L., & Itsuno, S. (2008) · Polymer · doi:10.1016/j.polymer.2008.01.029 · Cited by 57
Self-citationLi, C., & Dou, Q. (2014) · Thermochimica Acta · doi:10.1016/j.tca.2014.08.036 · Cited by 54
Handedness of Twisted Lamella in Banded Spherulite of Chiral Polylactides and Their Blends
Wang, H., Chiang, C., Hsu, W.-C., Wen, T., Chuang, W., Lotz, B., Li, M., & Ho, R. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b00318 · Cited by 51
Mulchandani, N., Masutani, K., Kumar, S., Yamane, H., Sakurai, S., Kimura, Y., & Katiyar, V. (2021) · Polymer Chemistry · doi:10.1039/d1py00429h · Cited by 49
Tsuji, H., Matsumura, N., & Arakawa, Y. (2016) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.5b11813 · Cited by 49
Self-citationHighly crystallized poly (lactic acid) under high pressure
Zhang, J. C., Yan, D., Xu, J., Huang, H., Lei, J., & Li, Z. (2012) · AIP Advances · doi:10.1063/1.4769351 · Cited by 47
Shao, J., Liu, Y., Xiang, S., Bian, X., Sun, J., Li, G., Chen, X., & Hou, H. (2015) · Chinese Journal of Polymer Science · doi:10.1007/s10118-015-1715-y · Cited by 46
Methodology for determination of magnetic force of polymeric nanocomposites
de Souza, F. G., Ferreira, A. C., Varela, A. D. V., Oliveira, G. E., Machado, F., Pereira, E. D., Fernandes, E., Pinto, J. C., & Nele, M. (2013) · Polymer Testing · doi:10.1016/j.polymertesting.2013.09.018 · Cited by 44
Stereocomplexation of solvent‐cast poly(lactic acid) by addition of non‐solvents
Furuhashi, Y., & Yoshie, N. (2011) · Polymer International · doi:10.1002/pi.3190 · Cited by 45
Wei, X., Bao, R., Cao, Z.-Q., Zhang, L.-Q., Liu, Z., Yang, W. M., Xie, B., & Yang, M. (2013) · Colloid & Polymer Science · doi:10.1007/s00396-013-3067-x · Cited by 44
Shao, J., Guo, Y., Xiang, S., Zhou, D., Bian, X., Sun, J., Li, G., & Hou, H. (2015) · CrystEngComm · doi:10.1039/c5ce02017d · Cited by 43
Sun, J., He, C., Zhuang, X., Jing, X., & Chen, X. (2011) · Journal of Polymer Research · doi:10.1007/s10965-011-9626-2 · Cited by 43
Tsuji, H., & Okumura, A. (2010) · Polymer Journal · doi:10.1038/pj.2010.133 · Cited by 41
Self-citationTsuji, H., Shimizu, K., Sakamoto, Y., & Okumura, A. (2011) · Polymer · doi:10.1016/j.polymer.2011.01.040 · Cited by 40
Self-citationBao, R., Yang, W. M., Liu, Z., Xie, B., & Yang, M. (2015) · RSC Advances · doi:10.1039/c5ra00691k · Cited by 39
Nano‐Stereocomplexation of Polylactide (PLA) Spheres by Spray Droplet Atomization
Arias, V., Odelius, K., & Albertsson, A. (2014) · Macromolecular Rapid Communications · doi:10.1002/marc.201400374 · Cited by 40
Qiu, J., Guan, J., Wang, H., Zhu, S., Cao, X., Ye, Q., & Li, Y. (2014) · The Journal of Physical Chemistry B · doi:10.1021/jp412519g · Cited by 38
Tsuji, H., Yamamoto, S., & Okumura, A. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.34163 · Cited by 36
Self-citationDevelopment of High Temperature Resistant Stereocomplex PLA for Injection Moulding
Körber, S., Moser, K., & Diemert, J. (2022) · Polymers · doi:10.3390/polym14030384 · Cited by 37
Jia, L., Yin, L., Li, Y., Li, Q., Yang, J., Yu, J., Shi, Z., Fang, Q., & 曹阿民 (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200400227 · Cited by 34
Inkinen, S., Stolt, M., & Södergård, A. (2010) · Polymers for Advanced Technologies · doi:10.1002/pat.1654 · Cited by 36
Tsuji, H., & Sobue, T. (2015) · Polymer · doi:10.1016/j.polymer.2015.05.056 · Cited by 34
Self-citationDuan, Y., Liu, J., Sato, H., Zhang, J., Tsuji, H., Ozaki, Y., & Yan, S. (2006) · Biomacromolecules · doi:10.1021/bm060043t · Cited by 34
Self-citationUnique crystallization behavior of multi-walled carbon nanotube filled poly(lactic acid)
Kim, S. Y., Shin, K. S., Lee, S. H., Kim, K. W., & Youn, J. R. (2010) · Fibers and Polymers · doi:10.1007/s12221-010-1018-4 · Cited by 34
PLA-Based Biodegradable Polymer from Synthesis to the Application
Wi, J., Choi, J., & Lee, S. Y. (2025) · Polymers · doi:10.3390/polym18010121 · Cited by 40
“Furthermore, subsequent studies have confirmed that the crystalline structure varies depending on the composition of the homopolymer, revealing that crystallinity is particularly high when using low-molecular-weight enantiomers [92]. the chain [38].”
The chiral effects on the responses of osteoblastic cells to the polymeric substrates
Yi, Q., Wen, X., Li, L., He, B., Nie, Y., Wu, Y., Zhang, Z., & Gu, Z. (2009) · European Polymer Journal · doi:10.1016/j.eurpolymj.2009.04.018 · Cited by 36
Li, Y., Han, C., Zhang, X., Dong, Q., & Dong, L. (2013) · Thermochimica Acta · doi:10.1016/j.tca.2013.09.035 · Cited by 33
Stereocomplexation and morphology of enantiomeric poly(lactic acid)s with moderate‐molecular‐weight
Wang, Y., & Mano, J. F. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.27260 · Cited by 32
Isothermal Crystallization Kinetics of Fiber/Polylactic Acid Composites and Morphology
Liu, T., Yu, X., Yu, F., Zhao, X., Lu, A., Wang, J., Wang, X., & Liu, T. (2012) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2012.659309 · Cited by 32
Gupta, A., Mulchandani, N., Shah, M., Kumar, S., & Katiyar, V. (2017) · Polymer · doi:10.1016/j.polymer.2017.12.064 · Cited by 31
Microstructure and non-isothermal crystallization behavior of PP/PLA/clay hybrid nanocomposites
Ebadi‐Dehaghani, H., Barikani, M., Khonakdar, H. A., & Jafari, S. H. (2015) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-015-4554-8 · Cited by 30
Thermostimulated crystallization of polylactide stereocomplex
Sun, J., Shao, J., Huang, S., Zhang, B., Li, G., Wang, X., & Chen, X. (2012) · Materials Letters · doi:10.1016/j.matlet.2012.08.129 · Cited by 30
Chang, L., & Woo, E. M. (2010) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201000375 · Cited by 30
Characteristics and Applications of Poly(lactide)
Domenek, S., Courgneau, C., & Ducruet, V. (2011) · Wiley eBooks · doi:10.1002/9781118164792.ch8 · Cited by 40
Li, Y., Han, C., Zhang, X., Xu, K., Bian, J., & Dong, L. (2013) · Polymer Engineering and Science · doi:10.1002/pen.23620 · Cited by 29
Li, Y., Han, C., Yu, Y., & Huang, D. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.07.068 · Cited by 29
Li, Y., Zhao, L., Han, C., & Yu, Y. (2020) · Colloid & Polymer Science · doi:10.1007/s00396-020-04636-1 · Cited by 31
Lorenzo, M. L. D., Rubino, P., & Cocca, M. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40372 · Cited by 30
Efficient stereocomplex crystallization in enantiomeric blends of high molecular weight polylactides
López‐Rodríguez, N., de Arenaza, I. M., Meaurio, E., & Sarasua, J.-R. (2015) · RSC Advances · doi:10.1039/c4ra16994h · Cited by 28
Han, L., Han, C., Bian, J., Bian, Y., Lin, H., Wang, X., Zhang, H., & Dong, L. (2012) · Polymer Engineering and Science · doi:10.1002/pen.23095 · Cited by 28
Metadata
- Authors
- Tsuji, H., & Tezuka, Y.
- Affiliations
- Toyohashi University of Technology (JP)
- ORCID
- Tsuji, Hideto
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-06-12
- Volume
- 5
- Issue
- 4
- Pages
- 1181-1186
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2037796182
- Cited by
- 194
- References
- 30
- Citations by year
- 2026: 4 · 2025: 7 · 2024: 6 · 2023: 6 · 2022: 8 · 2021: 8 · 2020: 3 · 2019: 8 · 2018: 7 · 2017: 13 · 2016: 16 · 2015: 18 · 2014: 11 · 2013: 13 · 2012: 14
- FWCI
- 5.61
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Materials Chemistry › Crystallization and Solubility Studies
- Keywords
- stereocomplex formation, poly(L-lactic acid), poly(D-lactide), spherulite growth, melt crystallization, crystallization kinetics, stereocomplex crystallites, induction period, polymer blends, stereocomplex polymers
- MeSH terms
- Biocompatible Materials, Crystallization, Molecular Weight, Photomicrography, Polyesters, Polymers, Stereoisomerism, Temperature, Lactic Acid, Macromolecular Substances
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.