The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.
Conjugated Polymer Photovoltaic Cells
Abstract
Conjugated polymers are attractive semiconductors for photovoltaic cells because they are strong absorbers and can be deposited on flexible substrates at low cost. Cells made with a single polymer and two electrodes tend to be inefficient because the photogenerated excitons are usually not split by the built-in electric field, which arises from differences in the electrode work functions. The efficiency can be increased by splitting the excitons at an interface between two semiconductors with offset energy levels. Power conversion efficiencies of almost 4% have been achieved by blending polymers with electron-accepting materials such as C 60 derivatives, cadmium selenide, and titanium dioxide. We predict that efficiencies higher than 10% can be achieved by optimizing the cell's architecture to promote efficient exciton splitting and charge transport and by reducing the band gap of the polymer so that a larger fraction of the solar spectrum can be absorbed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films
O'Regan, B., & Grätzel, M. (1991) · Nature · doi:10.1038/353737a0 · Cited by 28,599
Detailed Balance Limit of Efficiency of p-n Junction Solar Cells
Shockley, W., & Queisser, H. J. (1961) · Journal of Applied Physics · doi:10.1063/1.1736034 · Cited by 13,258
One‐Dimensional Nanostructures: Synthesis, Characterization, and Applications
Xia, Y., Yang, P., Sun, Y., Wu, Y., Mayers, B., Gates, B., Yin, Y., Kim, F., & Yan, H. (2003) · Advanced Materials · doi:10.1002/adma.200390087 · Cited by 8,559
Hybrid Nanorod-Polymer Solar Cells
Huynh, W. U., Dittmer, J. J., & Alivisatos, A. P. (2002) · Science · doi:10.1126/science.1069156 · Cited by 5,014
Two-layer organic photovoltaic cell
Tang, C. W. (1986) · Applied Physics Letters · doi:10.1063/1.96937 · Cited by 5,002
Bach, U., Lupo, D., Comte, P., Moser, J. E., Weissörtel, F., Salbeck, J., Spreitzer, H., & Grätzel, M. (1998) · Nature · doi:10.1038/26936 · Cited by 3,528
Efficient photodiodes from interpenetrating polymer networks
Halls, J. J. M., Walsh, C. A., Greenham, N. C., Marseglia, E. A., Friend, R. H., Moratti, S. C., & Holmes, A. B. (1995) · Nature · doi:10.1038/376498a0 · Cited by 3,258
Integrated Optoelectronic Devices Based on Conjugated Polymers
Sirringhaus, H., Tessler, N., & Friend, R. H. (1998) · Science · doi:10.1126/science.280.5370.1741 · Cited by 2,736
Small molecular weight organic thin-film photodetectors and solar cells
Peumans, P., Yakimov, A., & Forrest, S. R. (2003) · Journal of Applied Physics · doi:10.1063/1.1534621 · Cited by 2,731
2.5% efficient organic plastic solar cells
Shaheen, S. E., Brabec, C. J., Sariciftci, N. S., Padinger, F., Fromherz, T., & Hummelen, J. C. (2001) · Applied Physics Letters · doi:10.1063/1.1345834 · Cited by 2,613
Cited by
Items 101–139 of 139
Beverina, L., & Salice, P. (2010) · European Journal of Organic Chemistry · doi:10.1002/ejoc.200901297 · Cited by 342
Teo, Y. N., & Kool, E. T. (2012) · Chemical Reviews · doi:10.1021/cr100351g · Cited by 327
Scully, S. R., & McGehee, M. D. (2006) · Journal of Applied Physics · doi:10.1063/1.2226687 · Cited by 323
Self-citationOn the morphology of polymer‐based photovoltaics
Liu, F., Gu, Y., Jung, J. W., Jo, W. H., & Russell, T. P. (2012) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23063 · Cited by 323
Collins, B. A., Tumbleston, J. R., & Ade, H. (2011) · The Journal of Physical Chemistry Letters · doi:10.1021/jz2014902 · Cited by 321
Zhao, Y., Xie, Z., Qu, Y., Geng, Y., & Wang, L. (2007) · Applied Physics Letters · doi:10.1063/1.2434173 · Cited by 318
Conjugated polymers for high-efficiency organic photovoltaics
Zhan, X., & Zhu, D. (2010) · Polymer Chemistry · doi:10.1039/b9py00325h · Cited by 317
Brunetti, F. G., Gong, X., Tong, M., Heeger, A. J., & Wudl, F. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200905117 · Cited by 313
Zhang, M., Gu, Y., Guo, X., Liu, F., Zhang, S., Huo, L., Russell, T. P., & Hou, J. (2013) · Advanced Materials · doi:10.1002/adma.201301494 · Cited by 313
Tin and germanium monochalcogenide IV–VI semiconductor nanocrystals for use in solar cells
Antunez, P. D., Buckley, J. J., & Brutchey, R. L. (2011) · Nanoscale · doi:10.1039/c1nr10084j · Cited by 310
Zhang, Q., Cirpan, A., Russell, T. P., & Emrick, T. (2009) · Macromolecules · doi:10.1021/ma801504e · Cited by 307
Multifunctional hybrids by combining ordered mesoporous materials and macromolecular building blocks
Soler-Illia, G. J. A. A., & Azzaroni, O. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00208a · Cited by 305
Air stable polymer photovoltaics based on a process free from vacuum steps and fullerenes
Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.01.013 · Cited by 303
Time‐Dependent Morphology Evolution by Annealing Processes on Polymer:Fullerene Blend Solar Cells
Jo, J., Kim, S., Na, S., Yu, B., & Kim, D. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200800968 · Cited by 299
Mesoporous thin films: properties and applications
Innocenzi, P., & Malfatti, L. (2013) · Chemical Society Reviews · doi:10.1039/c3cs35377j · Cited by 298
Efficiency Enhancement in Organic Photovoltaic Cells: Consequences of Optimizing Series Resistance
Servaites, J. D., Yeganeh, S., Marks, T. J., & Ratner, M. A. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200901107 · Cited by 295
Energy Harvesting Research: The Road from Single Source to Multisource
Bai, Y., Jantunen, H., & Juuti, J. (2018) · Advanced Materials · doi:10.1002/adma.201707271 · Cited by 295
Polymer based thermoelectric nanocomposite materials and devices: Fabrication and characteristics
Nandihalli, N., Liu, C.-J., & Mori, T. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105186 · Cited by 293
Regioregular Copolymers of 3-Alkoxythiophene and Their Photovoltaic Application
Shi, C., Yao, Y., Yang, & Pei, Q. (2006) · Journal of the American Chemical Society · doi:10.1021/ja061664x · Cited by 288
Conjugated polymer–inorganic semiconductor hybrid solar cells
Xu, T., & Qiao, Q. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00632g · Cited by 284
Solution‐Processed Organic Tandem Solar Cells
Hadipour, A., de Boer, B., Wildeman, J., Kooistra, F. B., Hummelen, J. C., Turbiez, M. G. R., Wienk, M. M., Janssen, R. A. J., & Blom, P. W. M. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600138 · Cited by 284
Water-Induced Degradation of Polymer Solar Cells Studied by H218O Labeling
Norrman, K., Gevorgyan, S. A., & Krebs, F. C. (2009) · ACS Applied Materials & Interfaces · doi:10.1021/am800039w · Cited by 281
Efficient Squaraine-Based Solution Processable Bulk-Heterojunction Solar Cells
Silvestri, F., Irwin, M. D., Beverina, L., Facchetti, A., Pagani, G. A., & Marks, T. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8067879 · Cited by 280
Photocrosslinkable Polythiophenes for Efficient, Thermally Stable, Organic Photovoltaics
Kim, B. J., Miyamoto, Y., Ma, B., & Fréchet, J. M. J. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200900043 · Cited by 276
Characterization of the morphology of solution-processed bulk heterojunction organic photovoltaics
Liu, F., Gu, Y., Shen, X., Ferdous, S., Wang, H.-W., & Russell, T. P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.07.010 · Cited by 268
Reiss, P., Couderc, E., De Girolamo, J., & Pron, A. (2011) · Nanoscale · doi:10.1039/c0nr00403k · Cited by 268
Liu, D., & Cao, G. (2010) · Energy & Environmental Science · doi:10.1039/b922656g · Cited by 268
Recent trends in polymer tandem solar cells research
You, J., Dou, L., Hong, Z., Li, G., & Yang, Y. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.04.005 · Cited by 267
Bulk-heterojunction hybrid solar cells based on colloidal nanocrystals and conjugated polymers
Zhou, Y., Eck, M., & Krüger, M. (2010) · Energy & Environmental Science · doi:10.1039/c0ee00143k · Cited by 266
Guo, X., Zhou, N., Lou, S. J., Hennek, J. W., Ponce Ortiz, R., Butler, M. R., Boudreault, P.-L. T., Strzalka, J., Morin, P.-O., Leclerc, M., et al. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3081583 · Cited by 265
Liu, C., Yi, C., Wang, K., Yang, Y., Bhatta, R. S., Tsige, M., Xiao, S., & Gong, X. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am509047g · Cited by 264
Organic Tandem and Multi‐Junction Solar Cells
Hadipour, A., de Boer, B., & Blom, P. W. M. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200700517 · Cited by 263
Song, X., Liang, C., Gong, H., Chen, Q., Wang, C., & Liu, Z. (2015) · Small · doi:10.1002/smll.201500550 · Cited by 262
Fan, L.-J., Zhang, Y., Murphy, C. B., Angell, S. E., Parker, M. F. L., Flynn, B. R., & Jones, W. E. (2009) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2008.03.008 · Cited by 260
Risko, C., McGehee, M. D., & Brédas, J.-L. (2011) · Chem. Sci. · doi:10.1039/c0sc00642d · Cited by 257
Self-citationRen, S., Zeng, D., Zhong, H., Wang, Y., Qian, S., & Fang, Q. (2010) · The Journal of Physical Chemistry B · doi:10.1021/jp104710y · Cited by 97
Dastoor, P. C., McNeill, C. R., Frohne, H., Foster, C. J., Dean, B., Fell, C. J., Belcher, W. J., Campbell, W. M., Officer, D. L., Blake, I. M., et al. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp0748664 · Cited by 77
Tamura, Y., Saeki, H., Hashizume, J., Okazaki, Y., Kuzuhara, D., Suzuki, M., Aratani, N., & Yamada, H. (2014) · Chemical Communications · doi:10.1039/c4cc03801k · Cited by 33
Regioregular Polythiophene–Porphyrin Supramolecular Copolymers for Optoelectronic Applications
Chevrier, M., Kesters, J., Blayo, C., Richeter, S., Van Der Lee, A., Coulembier, O., Surin, M., Mehdi, A., Lazzaroni, R., Evans, R. C., et al. (2016) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201500280 · Cited by 15
Metadata
- Authors
- Coakley, K. M., & McGehee, M. D.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-08-13
- Volume
- 16
- Issue
- 23
- Pages
- 4533-4542
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2131873809
- Cited by
- 2,128
- References
- 53
- FWCI
- 81.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.