The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Catalyst Design with Atomic Layer Deposition
Open accessAbstract
Abstract Atomic layer deposition (ALD) has emerged as an interesting tool for the atomically precise design and synthesis of catalytic materials. Herein, we discuss examples in which the atomic precision has been used to elucidate reaction mechanisms and catalyst structure–property relationships by creating materials with a controlled distribution of size, composition, and active site. We highlight ways ALD has been utilized to design catalysts with improved activity, selectivity, and stability under a variety of conditions (e.g., high temperature, gas and liquid phase, and corrosive environments). In addition, due to the flexibility and control of structure and composition, ALD can create myriad catalytic structures (e.g., high surface area oxides, metal nanoparticles, bimetallic nanoparticles, bifunctional catalysts, controlled microenvironments, etc.) that consequently possess applicability for a wide range of chemical reactions (e.g., CO2 conversion, electrocatalysis, photocatalytic and thermal water splitting, methane conversion, ethane and propane dehydrogenation, and biomass conversion). Finally, the outlook for ALD-derived catalytic materials is discussed, with emphasis on the pending challenges as well as areas of significant potential for building scientific insight and achieving practical impacts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Goldstein, D. N., McCormick, J. A., & George, S. M. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp804296a · Cited by 330
Lu, J., Low, K.-B., Lei, Y., Libera, J. A., Nicholls, A., Stair, P. C., & Elam, J. W. (2014) · Nature Communications · doi:10.1038/ncomms4264 · Cited by 233
Self-citationSchwartz, T. J., O’Neill, B. J., Shanks, B. H., & Dumesic, J. A. (2014) · ACS Catalysis · doi:10.1021/cs500364y · Cited by 175
Self-citationCO 2 Reduction to Methanol on TiO 2 -Passivated GaP Photocatalysts
Zeng, G., Qiu, J., Li, Z., Pavaskar, P., & Cronin, S. B. (2014) · ACS Catalysis · doi:10.1021/cs500697w · Cited by 154
Cited by
Catalysis by Supported Single Metal Atoms
Liu, J. (2017) · ACS Catalysis · doi:10.1021/acscatal.6b01534 · Cited by 1,331
Lee, J., Kim, K.-H., & Kwon, E. E. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.04.002 · Cited by 668
Self-citationAtomically dispersed iron hydroxide anchored on Pt for preferential oxidation of CO in H2
Cao, L., Liu, W., Luo, Q., Yin, R., Wang, B., Weissenrieder, J., Soldemo, M., Yan, H., Lin, Y., Sun, Z., et al. (2019) · Nature · doi:10.1038/s41586-018-0869-5 · Cited by 641
From the Bottom-Up: Toward Area-Selective Atomic Layer Deposition with High Selectivity
Mackus, A. J. M., Merkx, M. J. M., & Kessels, W. M. M. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b03454 · Cited by 426
Recent advances in the precise control of isolated single-site catalysts by chemical methods
Li, Z., Wang, D., Wu, Y., & Li, Y. (2018) · National Science Review · doi:10.1093/nsr/nwy056 · Cited by 325
Onn, T., Küngas, R., Fornasiero, P., Huang, K., & Gorte, R. (2018) · Inorganics · doi:10.3390/inorganics6010034 · Cited by 111
Extending the limits of Pt/C catalysts with passivation-gas-incorporated atomic layer deposition
Xu, S., Kim, Y., Park, J., Higgins, D., Shen, S.-J., Schindler, P., Thian, D., Provine, J., Torgersen, J., Graf, T., et al. (2018) · Nature Catalysis · doi:10.1038/s41929-018-0118-1 · Cited by 81
Atwa, M., Li, X., Wang, Z., Dull, S., Xu, S., Tong, X., Tang, R., Nishihara, H., Prinz, F., & Birss, V. (2021) · Materials Horizons · doi:10.1039/d1mh00268f · Cited by 36
Lee, D., Kim, Y., Han, H., Kim, W. B., Chang, H., Chung, T.-M., Han, J. H., Kim, H. W., & Kim, H. J. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta02509g · Cited by 30
Metadata
- Authors
- O’Neill, B. J., Jackson, D. H. K., Lee, J., Canlas, C., Stair, P. C., Marshall, C. L., Elam, J. W., Kuech, T. F., Dumesic, J. A., & Huber, G. W.
- Venue
- ACS Catalysis
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-02-19
- Volume
- 5
- Issue
- 3
- Pages
- 1804-1825
- ISSN
- 2155-5435 (ISSN-L)
- OpenAlex
- W2326995674
- Cited by
- 782
- References
- 4
- FWCI
- 28.11
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
