Atomic Layer Deposition on Porous Materials: Problems with Conventional Approaches to Catalyst and Fuel Cell Electrode Preparation
Open accessThe DOI matches its Crossref record; 115 of the 115 references it cites were found in a registry or an index.
Abstract
Atomic layer deposition (ALD) offers exciting possibilities for controlling the structure and composition of surfaces on the atomic scale in heterogeneous catalysts and solid oxide fuel cell (SOFC) electrodes. However, while ALD procedures and equipment are well developed for applications involving flat surfaces, the conditions required for ALD in porous materials with a large surface area need to be very different. The materials (e.g., rare earths and other functional oxides) that are of interest for catalytic applications will also be different. For flat surfaces, rapid cycling, enabled by high carrier-gas flow rates, is necessary in order to rapidly grow thicker films. By contrast, ALD films in porous materials rarely need to be more than 1 nm thick. The elimination of diffusion gradients, efficient use of precursors, and ligand removal with less reactive precursors are the major factors that need to be controlled. In this review, criteria will be outlined for the successful use of ALD in porous materials. Examples of opportunities for using ALD to modify heterogeneous catalysts and SOFC electrodes will be given.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“As stated above, the literature has shown that it is challenging to attain a uniform deposition of a range of materials onto carbon powder surfaces via atomic layer deposition (ALD), especially of catalytic metal NPs, 23 partly as the tortuous microstructures found in packed carbon powders do not offer the required line-of-sight.”
From Scalable nanoporous carbon films allow line-of-sight 3D atomic layer deposition of Pt: towards a new generation catalyst layer for PEM fuel cells. (2021) · cites this paper as [23]
Citations
Cites
Atomic Layer Deposition: An Overview
George, S. M. (2010) · Chemical Reviews · doi:10.1021/cr900056b · Cited by 5,814 · cited 2×
“In order to increase the production rate of wafers in the semiconductor industry, flow ALD systems with He as the carrier gas are used to flush gas-phase and physisorbed molecules from the sample [21,41].”
BackgroundFundamentals and Catalytic Applications of CeO 2 -Based Materials
Montini, T., Melchionna, M., Monai, M., & Fornasiero, P. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00603 · Cited by 2,766
Self-citationSurface chemistry of atomic layer deposition: A case study for the trimethylaluminum/water process
Puurunen, R. L. (2005) · Journal of Applied Physics · doi:10.1063/1.1940727 · Cited by 2,609
A brief review of atomic layer deposition: from fundamentals to applications
Johnson, R. W., Hultqvist, A., & Bent, S. F. (2014) · Materials Today · doi:10.1016/j.mattod.2014.04.026 · Cited by 1,996
Crystallinity of inorganic films grown by atomic layer deposition: Overview and general trends
Miikkulainen, V., Leskelä, M., Ritala, M., & Puurunen, R. L. (2013) · Journal of Applied Physics · doi:10.1063/1.4757907 · Cited by 1,413 · cited 4×
“halides, alkoxides, β-diketonates, alkyls, and cyclopentadienyls [16,53].”
BackgroundMethodInfluentialControl of Metal Nanocrystal Size Reveals Metal-Support Interface Role for Ceria Catalysts
Cargnello, M., Doan-Nguyen, V. V. T., Gordon, T. R., Diaz, R. E., Stach, E. A., Gorte, R. J., Fornasiero, P., & Murray, C. B. (2013) · Science · doi:10.1126/science.1240148 · Cited by 1,412
Self-citationMaterials for Solid Oxide Fuel Cells
Jacobson, A. J. (2010) · Chemistry of Materials · doi:10.1021/cm902640j · Cited by 1,366
Yang, L., Wang, S., Blinn, K., Liu, M., Liu, Z., Cheng, Z., & Liu, M. (2009) · Science · doi:10.1126/science.1174811 · Cited by 1,225
Yan, H., Cheng, H., Yi, H., Lin, Y., Yao, T., Wang, C., Li, J., Wei, S., & Lu, J. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06485 · Cited by 1,091
Single-atom Catalysis Using Pt/Graphene Achieved through Atomic Layer Deposition
Sun, S., Zhang, G., Gauquelin, N., Chen, N., Zhou, J., Yang, S., Chen, W., Meng, X., Geng, D., Banis, M. N., et al. (2013) · Scientific Reports · doi:10.1038/srep01775 · Cited by 914 · cited 1×
“Increasing the number of cycles would cause an enhancement of the metal loading and the size of the metal clusters [45,83].”
Background
Cited by
Conformality in atomic layer deposition: Current status overview of analysis and modelling
Cremers, V., Puurunen, R. L., & Dendooven, J. (2019) · Applied Physics Reviews · doi:10.1063/1.5060967 · Cited by 508
Zaera, F. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00905 · Cited by 425
Single-Atom Catalysts Designed and Prepared by the Atomic Layer Deposition Technique
Fonseca, J., & Lu, J. (2021) · ACS Catalysis · doi:10.1021/acscatal.1c01200 · Cited by 344
Zhang, J., Ma, J., Choksi, T. S., Zhou, D., Han, S., Liao, Y.-F., Yang, H. B., Liu, D., Zeng, Z., Liu, W., et al. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.1c12157 · Cited by 241
Hossain, M. K., Raihan, G. A., Akbar, M. A., Kabir Rubel, M. H., Ahmed, M. H., Khan, M. I., Hossain, S., Sen, S. K., Jalal, M. I. E., & El-Denglawey, A. (2022) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.2c00069 · Cited by 200
Metadata
- Authors
- Onn, T., Küngas, R., Fornasiero, P., Huang, K., & Gorte, R.
- Affiliations
- University of Pennsylvania (US)
- Haldor Topsoe (Denmark) (DK)
- University of Trieste (IT)
- University of South Carolina (US)
- Corresponding author
- Gorte, Raymond
- Venue
- Inorganics
- Publisher
- MDPI AG
- Published
- 2018-03-13
- Volume
- 6
- Issue
- 1
- Pages
- 34
- ISSN
- 2304-6740 (ISSN-L)
- OpenAlex
- W2793998114
- Cited by
- 111
- References
- 114
- Citations by year
- 2026: 12 · 2025: 8 · 2024: 11 · 2023: 15 · 2022: 13 · 2021: 18 · 2020: 12 · 2019: 17 · 2018: 4
- FWCI
- 4.88
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Inorganics (publishedVersion, cc-by)
- ArTS Archivio della ricerca di Trieste (University of Trieste https://www.units.it/) (submittedVersion, cc-by)
- Scholar Commons (University of South Carolina) (submittedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Department of Energy, Office of Basic Energy Sciences, Chemical Sciences, Geosciences and Biosciences Division (DE-FG02-13ER16380)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Semiconductor materials and devices
- Physical Sciences › Materials Science › Materials Chemistry › Catalytic Processes in Materials Science
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Keywords
- atomic layer deposition, porous media, heterogeneous catalysts, solid oxide fuel cell electrodes, rare earth oxides, functional oxides, thin film growth, diffusion gradients, ligand removal, surface modification
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Atomic Layer Deposition on Porous Materials: Problems with Conventional Approaches to Catalyst and Fuel Cell Electrode Preparation. https://app.cochat.ai/papers/10.3390/inorganics6010034
- The paper
- Onn, T., Küngas, R., Fornasiero, P., Huang, K., & Gorte, R. (2018). Atomic Layer Deposition on Porous Materials: Problems with Conventional Approaches to Catalyst and Fuel Cell Electrode Preparation. Inorganics. https://doi.org/10.3390/inorganics6010034
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.