The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Sustainability Metrics: Life Cycle Assessment and Green Design in Polymers
Abstract
This study evaluates the efficacy of green design principles such as the "12 Principles of Green Chemistry," and the "12 Principles of Green Engineering" with respect to environmental impacts found using life cycle assessment (LCA) methodology. A case study of 12 polymers is presented, seven derived from petroleum, four derived from biological sources, and one derived from both. The environmental impacts of each polymer's production are assessed using LCA methodology standardized by the International Organization for Standardization (ISO). Each polymer is also assessed for its adherence to green design principles using metrics generated specifically for this paper. Metrics include atom economy, mass from renewable sources, biodegradability, percent recycled, distance of furthest feedstock, price, life cycle health hazards and life cycle energy use. A decision matrix is used to generate single value metrics for each polymer evaluating either adherence to green design principles or life-cycle environmental impacts. Results from this study show a qualified positive correlation between adherence to green design principles and a reduction of the environmental impacts of production. The qualification results from a disparity between biopolymers and petroleum polymers. While biopolymers rank highly in terms of green design, they exhibit relatively large environmental impacts from production. Biopolymers rank 1, 2, 3, and 4 based on green design metrics; however they rank in the middle of the LCA rankings. Polyolefins rank 1, 2, and 3 in the LCA rankings, whereas complex polymers, such as PET, PVC, and PC place at the bottom of both ranking systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Green Chemistry: Theory and Practice
Anastas, P. T., & Warner, J. C. (1998) · Medical Entomology and Zoology · Cited by 8,599
Use of U.S. Croplands for Biofuels Increases Greenhouse Gases Through Emissions from Land-Use Change
Searchinger, T., Heimlich, R., Houghton, R. A., Dong, F., Elobeid, A., Fabiosa, J., Tokgoz, S., Hayes, D., & Yu, T.-H. (2008) · Science · doi:10.1126/science.1151861 · Cited by 4,888
Cradle to cradle: remaking the way we make things
(2002) · Choice Reviews Online · doi:10.5860/choice.40-0914 · Cited by 3,829
Handbook on life cycle assessment operational guide to the ISO standards
Guinee, J. B. (2002) · The International Journal of Life Cycle Assessment · doi:10.1007/bf02978897 · Cited by 2,765
Origins, Current Status, and Future Challenges of Green Chemistry
Anastas, P. T., & Kirchhoff, M. M. (2002) · Accounts of Chemical Research · doi:10.1021/ar010065m · Cited by 2,214
Green Chemistry: Theory and Practice
Anastas, P. T., & Warner, J. C. (2000) · doi:10.1093/oso/9780198506980.001.0001 · Cited by 1,296
Peer Reviewed: Design Through the 12 Principles of Green Engineering
Anastas, P. T., & Zimmerman, J. B. (2003) · Environmental Science & Technology · doi:10.1021/es032373g · Cited by 1,273
Allenby, B., & Graedel, T. E. (1995) · Cited by 1,192
Applications of life cycle assessment to NatureWorks™ polylactide (PLA) production
Vink, E. T. H., Rábago, K. R., Glassner, D. A., & Gruber, P. R. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00372-5 · Cited by 1,092
Traci: The Tool for the Reduction and Assessment of Chemical and Other Environmental Impacts
Bare, J. C. (2002) · Journal of Industrial Ecology · doi:10.1162/108819802766269539 · Cited by 980
Cited by
Polymer-Based Organic Batteries
Muench, S., Wild, A., Friebe, C., Häupler, B., Janoschka, T., & Schubert, U. S. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00070 · Cited by 1,163
Catalysis as an Enabling Science for Sustainable Polymers
Zhang, X., Fevre, M., Jones, G. O., & Waymouth, R. M. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00329 · Cited by 936
Environmental performance of bio-based and biodegradable plastics: the road ahead
Lambert, S., & Wagner, M. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00149e · Cited by 838
From Multisite Polymerization Catalysis to Sustainable Materials and All-Polyolefin Composites
Stürzel, M., Mihan, S., & Mülhaupt, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00310 · Cited by 822
A critical review on the fused deposition modeling of thermoplastic polymer composites
Penumakala, P. K., Santo, J., & Thomas, A. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108336 · Cited by 704
Ethyl lactate as a solvent: Properties, applications and production processes – a review
Pereira, C. S. M., Silva, V. M. T. M., & Rodrigues, A. E. (2011) · Green Chemistry · doi:10.1039/c1gc15523g · Cited by 544
Prospects for microbiological solutions to environmental pollution with plastics
Krueger, M. C., Harms, H., & Schlosser, D. (2015) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-015-6879-4 · Cited by 534
Sustainability assessments of bio-based polymers
Hottle, T. A., Bilec, M. M., & Landis, A. E. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.06.016 · Cited by 525
Self-citationQin, M., Chen, C., Song, B., Shen, M., Cao, W., Yang, H., Zeng, G., & Gong, J. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127816 · Cited by 455
Life cycle assessments of biodegradable, commercial biopolymers—A critical review
Yates, M. R., & Barlow, C. Y. (2013) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2013.06.010 · Cited by 441
Sustainability of additive manufacturing: An overview on its energy demand and environmental impact
Peng, T., Kellens, K., Tang, R., Chen, C., & Chen, G. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.04.022 · Cited by 426
Biodegradable compatibilized polymer blends for packaging applications: A literature review
Muthuraj, R., Misra, M., & Mohanty, A. K. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.45726 · Cited by 391
Sustainable Polymers: Opportunities for the Next Decade
Miller, S. A. (2013) · ACS Macro Letters · doi:10.1021/mz400207g · Cited by 382
Recycling of Bioplastics: Routes and Benefits
Lamberti, F. M., Román-Ramírez, L. A., & Wood, J. (2020) · Journal of Polymers and the Environment · doi:10.1007/s10924-020-01795-8 · Cited by 365
Jiménez-González, C., Constable, D. J. C., & Ponder, C. S. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15215g · Cited by 352
Den, W., Sharma, V. K., Lee, M., Nadadur, G., & Varma, R. S. (2018) · Frontiers in Chemistry · doi:10.3389/fchem.2018.00141 · Cited by 344
Combining Reclaimed PET with Bio-based Monomers Enables Plastics Upcycling
Rorrer, N. A., Nicholson, S., Carpenter, A., Biddy, M. J., Grundl, N. J., & Beckham, G. T. (2019) · Joule · doi:10.1016/j.joule.2019.01.018 · Cited by 328
Zanchin, G., & Leone, G. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101342 · Cited by 326
Iacovidou, E., Velis, C. A., Purnell, P., Zwirner, O., Brown, A., Hahladakis, J., Millward-Hopkins, J., & Williams, P. T. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.07.100 · Cited by 317
Catalytic Upcycling of Polyolefins
Sun, J., Dong, J., Gao, L., Zhao, Y.-Q., Moon, H., & Scott, S. L. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00943 · Cited by 317
Kreiger, M., & Pearce, J. M. (2013) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc400093k · Cited by 295
Sala, S., Farioli, F., & Zamagni, A. (2013) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-012-0508-6 · Cited by 295
Production of biodegradable plastic from agricultural wastes
Mostafa, N. A., Farag, A. A., Abo-dief, H. M., & Tayeb, A. M. (2018) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2015.04.008 · Cited by 277
Circular economy of plastic packaging: Current practice and perspectives in Austria
Van Eygen, E., Laner, D., & Fellner, J. (2018) · Waste Management · doi:10.1016/j.wasman.2017.11.040 · Cited by 262
Sauter, D., Taoufik, M., & Boisson, C. (2017) · Polymers · doi:10.3390/polym9060185 · Cited by 257
Biopolymer production and end of life comparisons using life cycle assessment
Hottle, T. A., Bilec, M. M., & Landis, A. E. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.03.002 · Cited by 255
Self-citationShen, L., Worrell, E., & Patel, M. K. (2012) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.1368 · Cited by 146
Cradle-to-Gate Life Cycle Assessment for a Cradle-to-Cradle Cycle: Biogas-to-Bioplastic (and Back)
Rostkowski, K. H., Criddle, C. S., & Lepech, M. D. (2012) · Environmental Science & Technology · doi:10.1021/es204541w · Cited by 137
The Role of Biodegradable Plastic in Solving Plastic Solid Waste Accumulation
Dilkes-Hoffman, L. S., Pratt, S., Lant, P. A., & Laycock, B. (2019) · Plastics to Energy · doi:10.1016/b978-0-12-813140-4.00019-4 · Cited by 117
Tailoring Hydrocarbon Polymers and All‐Hydrocarbon Composites for Circular Economy
Hees, T., Zhong, F., Stürzel, M., & Mülhaupt, R. (2019) · Macromolecular Rapid Communications · doi:10.1002/marc.201800608 · Cited by 100
Synthesis of Nonalternating Polyketones Using Cationic Diphosphazane Monoxide-Palladium Complexes
Chen, S.-Y., Pan, R.-C., Chen, M., Liu, Y., Chen, C., & Lu, X.-B. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.1c04964 · Cited by 95
A Lifecycle Assessment of Meat Processing Products Made from Protein-Based Thermoplastics
Verbeek, C. J. R., Van der Merwe, D. W., & Bier, J. M. (2023) · Sustainability · doi:10.3390/su15043455 · Cited by 6
Metadata
- Authors
- Tabone, M. D., Cregg, J. J., Beckman, E. J., & Landis, A. E.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-09-24
- Volume
- 44
- Issue
- 21
- Pages
- 8264-8269
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2014361844
- Cited by
- 416
- References
- 28
- FWCI
- 14.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.