The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Thermodynamic Analysis of Contamination by Alloying Elements in Aluminum Recycling
Abstract
In previous studies on the physical chemistry of pyrometallurgical processing of aluminum scrap, only a limited number of thermodynamic parameters, such as the Gibbs free energy change of impurity reactions and the variation of activity of an impurity in molten aluminum, were taken into account. In contrast, in this study we thermodynamically evaluated the quantitative removal limit of impurities during the remelting of aluminum scrap; all relevant parameters, such as the total pressure, the activity coefficient of the target impurity, the temperature, the oxygen partial pressure, and the activity coefficient of oxidation product, were considered. For 45 elements that usually occur in aluminum products, the distribution ratios among the metal, slag, and gas phases in the aluminum remelting process were obtained. Our results show that, except for elements such as Mg and Zn, most of the impurities occurred as troublesome tramp elements that are difficult to remove, and our results also indicate that the extent to which the process parameters such as oxygen partial pressure, temperature, and flux composition can be changed in aluminum production is quite limited compared to that for iron and copper production, owing to aluminum's relatively low melting point and strong affinity for oxygen. Therefore, the control of impurities in the disassembly process and the quality of scrap play important roles in suppressing contamination in aluminum recycling.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermochemical Data of Pure Substances
Barin, I. (1995) · doi:10.1002/9783527619825 · Cited by 4,241
Cited by
Zink, T., & Geyer, R. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12545 · Cited by 1,210
Reck, B. K., & Graedel, T. E. (2012) · Science · doi:10.1126/science.1217501 · Cited by 852
Geueke, B., Groh, K., & Muncke, J. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.05.005 · Cited by 673
Making sustainable aluminum by recycling scrap: The science of “dirty” alloys
Raabe, D., Ponge, D., Uggowitzer, P. J., Roscher, M., Paolantonio, M., Liu, C., Antrekowitsch, H., Kozeschnik, E., Seidmann, D., Gault, B., et al. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100947 · Cited by 626
Mapping the Global Flow of Aluminum: From Liquid Aluminum to End-Use Goods
Cullen, J. M., & Allwood, J. M. (2013) · Environmental Science & Technology · doi:10.1021/es304256s · Cited by 296
Modaresi, R., Pauliuk, S., Løvik, A. N., & Müller, D. B. (2014) · Environmental Science & Technology · doi:10.1021/es502930w · Cited by 137
Long-Term Strategies for Increased Recycling of Automotive Aluminum and Its Alloying Elements
Løvik, A. N., Modaresi, R., & Müller, D. B. (2014) · Environmental Science & Technology · doi:10.1021/es405604g · Cited by 136
Sustainable aluminium recycling of end-of-life products: A joining techniques perspective
Soo, V. K., Peeters, J., Paraskevas, D., Compston, P., Doolan, M., & Duflou, J. R. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.235 · Cited by 105
Are scarce metals in cars functionally recycled?
Andersson, M., Ljunggren Söderman, M., & Sandén, B. A. (2017) · Waste Management · doi:10.1016/j.wasman.2016.06.031 · Cited by 101
Van den Eynde, S., Bracquené, E., Diaz-Romero, D., Zaplana, I., Engelen, B., Duflou, J. R., & Peeters, J. R. (2022) · Waste Management · doi:10.1016/j.wasman.2021.11.019 · Cited by 101
Nakamura, S., Kondo, Y., Matsubae, K., Nakajima, K., Tasaki, T., & Nagasaka, T. (2012) · Environmental Science & Technology · doi:10.1021/es3013529 · Cited by 95
Self-citationNakajima, K., Ohno, H., Kondo, Y., Matsubae, K., Takeda, O., Miki, T., Nakamura, S., & Nagasaka, T. (2013) · Environmental Science & Technology · doi:10.1021/es3043559 · Cited by 95
Self-citationTracking Effective Measures for Closed-Loop Recycling of Automobile Steel in China
Hatayama, H., Daigo, I., & Tahara, K. (2014) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2014.03.006 · Cited by 30
Metadata
- Authors
- Nakajima, K., Takeda, O., Miki, T., Matsubae, K., Nakamura, S., & Nagasaka, T.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-06-10
- Volume
- 44
- Issue
- 14
- Pages
- 5594-5600
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2095127865
- Cited by
- 168
- References
- 1
- FWCI
- 11.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.