The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
GC/MS Characterization of Liquids Generated from Low-Temperature Pyrolysis of Wood
Abstract
Conventional pyrolysis of beech wood has been carried out for heating temperatures in the range 600−900 K, reproducing conditions of interest in countercurrent fixed-bed gasification. The yields of liquids (water and tars) increase with the heating temperature from about 40 to 55% of dry wood mass, confirming results previously obtained with a laboratory-scale gasifier. Apart from qualitative identification of ∼90 species, GC/MS techniques have been applied to quantify 40−43% of tars (40 species, with major contributions from acetic acid, hydroxypropanone, hydroxyacetaldehyde, levoglucosan, formic acid, syringol, and 2-furaldehyde). Decomposition of holocellulose leads to the formation of furan derivatives and carbohydrates, with a temperature-dominated selectivity toward hydroxyacetaldehyde against levoglucosan. Syringols and guaiacols, originating from primary degradation of lignin, present a maximum for heating temperatures of about 750−800 K whereas, owing to secondary degradation, phenols continuously increase. A comparison is also provided with fast pyrolysis liquids obtained from four commercial plants.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Molecular characterization of the pyrolysis of biomass
Evans, R. J., & Milne, T. A. (1987) · Energy & Fuels · doi:10.1021/ef00002a001 · Cited by 887
Cellulose Pyrolysis Kinetics: The Current State of Knowledge
Antal, M. J. J., & Varhegyi, G. (1995) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00042a001 · Cited by 859
Thermogravimetric Analysis and Devolatilization Kinetics of Wood
Grønli, M. G., Várhegyi, G., & Di Blasi, C. (2002) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0201157 · Cited by 818
Self-citationFuel Oil Quality of Biomass Pyrolysis OilsState of the Art for the End Users
Oasmaa, A., & Czernik, S. (1999) · Energy & Fuels · doi:10.1021/ef980272b · Cited by 805
Fast pyrolysis of biomass : a handbook
Bridgwater, A. V. (1999) · Medical Entomology and Zoology · Cited by 662
Developments in Thermochemical Biomass Conversion: Volume 1 / Volume 2
(1997) · Springer eBooks · doi:10.1007/978-94-009-1559-6 · Cited by 644
Progress in Thermochemical Biomass Conversion
(2001) · Wiley eBooks · doi:10.1002/9780470694954 · Cited by 552
Fundamentals of Thermochemical Biomass Conversion
(1985) · Springer eBooks · doi:10.1007/978-94-009-4932-4 · Cited by 541
Advances in Thermochemical Biomass Conversion
(1993) · Springer eBooks · doi:10.1007/978-94-011-1336-6 · Cited by 540
Wang, D., Czernik, S., Montané, D., Mann, M., & Chornet, E. (1997) · Industrial & Engineering Chemistry Research · doi:10.1021/ie960396g · Cited by 446
Cited by
Synthesis of Transportation Fuels from Biomass: Chemistry, Catalysts, and Engineering
Huber, G. W., Iborra, S., & Corma, A. (2006) · Chemical Reviews · doi:10.1021/cr068360d · Cited by 7,664
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Modeling chemical and physical processes of wood and biomass pyrolysis
DIBLASI, C. (2008) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2006.12.001 · Cited by 1,752
Combustion and gasification rates of lignocellulosic chars
Di Blasi, C. (2009) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2008.08.001 · Cited by 792
Self-citationRecent Advances in Hydrotreating of Pyrolysis Bio-Oil and Its Oxygen-Containing Model Compounds
Wang, H., Male, J., & Wang, Y. (2013) · ACS Catalysis · doi:10.1021/cs400069z · Cited by 714
Kawamoto, H. (2017) · Journal of Wood Science · doi:10.1007/s10086-016-1606-z · Cited by 664
Reaction mechanisms and multi-scale modelling of lignocellulosic biomass pyrolysis
Anca-Couce, A. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2015.10.002 · Cited by 664
Characterization of bio-oils in chemical families
Garcia-Perez, M., Chaala, A., Pakdel, H., Kretschmer, D., & Roy, C. (2007) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2006.02.006 · Cited by 498
Ruddy, D. A., Schaidle, J. A., Ferrell III, J. R., Wang, J., Moens, L., & Hensley, J. E. (2014) · Green Chem. · doi:10.1039/c3gc41354c · Cited by 495
Zeolite-catalyzed biomass conversion to fuels and chemicals
Taarning, E., Osmundsen, C. M., Yang, X., Voss, B., Andersen, S. I., & Christensen, C. H. (2011) · Energy Environ. Sci. · doi:10.1039/c004518g · Cited by 488
Ingram, L., Mohan, D., Bricka, M., Steele, P., Strobel, D., Crocker, D., Mitchell, B., Mohammad, J., Cantrell, K., & Pittman, C. U. (2008) · Energy & Fuels · doi:10.1021/ef700335k · Cited by 477
Catalytic Fast Pyrolysis: A Review
Dickerson, T., & Soria, J. (2013) · Energies · doi:10.3390/en6010514 · Cited by 461
Gayubo, A. G., Aguayo, A. T., Atutxa, A., Aguado, R., & Bilbao, J. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie030791o · Cited by 437
Demirbas, A. (2007) · Fuel Processing Technology · doi:10.1016/j.fuproc.2007.01.010 · Cited by 411
Influence of temperature on biomass pyrolysis in a conical spouted bed reactor
Amutio, M., Lopez, G., Artetxe, M., Elordi, G., Olazar, M., & Bilbao, J. (2012) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2011.04.002 · Cited by 345
Co-pyrolysis of biomass with waste tyres: Upgrading of liquid bio-fuel
Martínez, J. D., Veses, A., Mastral, A. M., Murillo, R., Navarro, M. V., Puy, N., Artigues, A., Bartrolí, J., & García, T. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2013.11.015 · Cited by 337
Bio-oil production from rice husk fast pyrolysis in a conical spouted bed reactor
Alvarez, J., Lopez, G., Amutio, M., Bilbao, J., & Olazar, M. (2014) · Fuel · doi:10.1016/j.fuel.2014.02.074 · Cited by 329
Current technologies for analysis of biomass thermochemical processing: A review
Bahng, M.-K., Mukarakate, C., Robichaud, D. J., & Nimlos, M. R. (2009) · Analytica Chimica Acta · doi:10.1016/j.aca.2009.08.016 · Cited by 319
Lu, Q., Zhang, Z.-F., Dong, C.-Q., & Zhu, X.-F. (2010) · Energies · doi:10.3390/en3111805 · Cited by 312
Dabros, T. M. H., Stummann, M. Z., Høj, M., Jensen, P. A., Grunwaldt, J.-D., Gabrielsen, J., Mortensen, P. M., & Jensen, A. D. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.05.002 · Cited by 309
Yang, X., Mills-Beale, J., & You, Z. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.11.100 · Cited by 299
A perspective on oxygenated species in the refinery integration of pyrolysis oil
Talmadge, M. S., Baldwin, R. M., Biddy, M. J., McCormick, R. L., Beckham, G. T., Ferguson, G. A., Czernik, S., Magrini-Bair, K. A., Foust, T. D., Metelski, P. D., et al. (2014) · Green Chem. · doi:10.1039/c3gc41951g · Cited by 272
Pollard, A. S., Rover, M. R., & Brown, R. C. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.10.007 · Cited by 266
Transforming Triglycerides and Fatty Acids into Biofuels
Lestari, S., Mäki‐Arvela, P., Beltramini, J., Lu, G. Q. M., & Murzin, D. Y. (2009) · ChemSusChem · doi:10.1002/cssc.200900107 · Cited by 260
Thangalazhy-Gopakumar, S., Adhikari, S., Ravindran, H., Gupta, R. B., Fasina, O., Tu, M., & Fernando, S. D. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.040 · Cited by 256
Garcia-Perez, M., Wang, S., Shen, J., Rhodes, M., Lee, W. J., & Li, C.-Z. (2008) · Energy & Fuels · doi:10.1021/ef7007634 · Cited by 235
Characteristics and mechanism study of analytical fast pyrolysis of poplar wood
Dong, C.-Q., Zhang, Z.-F., Lu, Q., & Yang, Y.-P. (2012) · Energy Conversion and Management · doi:10.1016/j.enconman.2011.12.012 · Cited by 209
Pyrogenic carbon capture and storage
Schmidt, H., Anca‐Couce, A., Hagemann, N., Werner, C., Gerten, D., Lucht, W., & Kammann, C. (2019) · GCB Bioenergy · doi:10.1111/gcbb.12553 · Cited by 186
Ateş, F., & Işıkdağ, M. A. (2008) · Energy & Fuels · doi:10.1021/ef7006276 · Cited by 126
Influence of Pyrolysis Operating Conditions on Bio-Oil Components: A Microscale Study in a Pyroprobe
Thangalazhy-Gopakumar, S., Adhikari, S., Gupta, R. B., & Fernando, S. D. (2011) · Energy & Fuels · doi:10.1021/ef101032s · Cited by 81
Thermal Analysis Technologies for Biomass Feedstocks: A State-of-the-Art Review
Teh, J. S., Teoh, Y. H., How, H. G., & Sher, F. (2021) · Processes · doi:10.3390/pr9091610 · Cited by 68
Understanding the pyrolysis of CCA-treated wood
Fu, Q., Argyropoulos, D. S., Tilotta, D. C., & Lucia, L. A. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.02.007 · Cited by 31
Metadata
- Authors
- Branca, C., Giudicianni, P., & Di Blasi, C.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2003-06-11
- Volume
- 42
- Issue
- 14
- Pages
- 3190-3202
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2007554042
- Cited by
- 405
- References
- 40
- FWCI
- 6.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.