The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Effect of Alkali Cations on Aluminum Incorporation in Geopolymeric Gels
Abstract
In geopolymeric gels, aluminum is known to have tetrahedral coordination and to be associated with an alkali cation to satisfy electronic neutrality. However, the mechanism of aluminum incorporation and the effects of different synthesis parameters are not well understood. 2 H, 27 Al, and 23 Na MAS NMR techniques have been used to elucidate the structural properties and mechanism of aluminum incorporation in metakaolin-based geopolymers. Na + (aq) and Al(OH) 4 - (aq) species were detected in the pore solution of geopolymers with Si/Al ratios of ≤1.40 and found to be directly related to the concentration of soluble silicate in the activating solution used for synthesis. The relative concentration of Na + (aq) in sodium and mixed-alkali geopolymers indicated a preferential incorporation of potassium into geopolymeric gels during curing. This work demonstrates a direct link between the composition of the silicate activator and aluminum incorporation in geopolymeric gels.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Geopolymers: Inorganic polymeric new materials
Davidovits, J. (1991) · Journal of Thermal Analysis · doi:10.1007/bf01912193 · Cited by 4,251
Zeolite and molecular sieve synthesis
Davis, M. E., & Lobo, R. F. (1992) · Chemistry of Materials · doi:10.1021/cm00022a005 · Cited by 1,430
Use of Infrared Spectroscopy to Study Geopolymerization of Heterogeneous Amorphous Aluminosilicates
Lee, W. K. W., & van Deventer, J. S. J. (2003) · Langmuir · doi:10.1021/la026127e · Cited by 538
Oelkers, E. H., & Gislason, S. R. (2001) · Geochimica et Cosmochimica Acta · doi:10.1016/s0016-7037(01)00664-0 · Cited by 498
Oelkers, E. H., Schott, J., & Devidal, J.-L. (1994) · Geochimica et Cosmochimica Acta · doi:10.1016/0016-7037(94)90281-x · Cited by 493
Rowles, M., & O'Connor, B. (2003) · Journal of Materials Chemistry · doi:10.1039/b212629j · Cited by 485
The effects of inorganic salt contamination on the strength and durability of geopolymers
Lee, W. K. W., & van Deventer, J. S. J. (2002) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(02)00239-x · Cited by 479
Self-citationLee, W. K. W., & van Deventer, J. S. J. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00724-4 · Cited by 382
Self-citationStructural reorganisation of class F fly ash in alkaline silicate solutions
Lee, W. K. W., & van Deventer, J. S. J. (2002) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(02)00237-6 · Cited by 363
Cited by
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Self-citationAdvances in alternative cementitious binders
Juenger, M. C. G., Winnefeld, F., Provis, J. L., & Ideker, J. H. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.012 · Cited by 1,851
Duxson, P., Provis, J. L., Lukey, G. C., Mallicoat, S. W., Kriven, W. M., & van Deventer, J. S. J. (2005) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.06.060 · Cited by 1,807
Self-citationNew cements for the 21st century: The pursuit of an alternative to Portland cement
Shi, C., Jiménez, A. F., & Palomo, A. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.016 · Cited by 1,691
Geopolymers and Related Alkali-Activated Materials
Provis, J. L., & Bernal, S. A. (2014) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070813-113515 · Cited by 1,597
Mechanism of geopolymerization and factors influencing its development: a review
Khale, D., & Chaudhary, R. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0401-4 · Cited by 1,463
A review: The comparison between alkali-activated slag (Si + Ca) and metakaolin (Si + Al) cements
Li, C., Sun, H., & Li, L. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.03.020 · Cited by 1,108
Fly ash-based geopolymer: clean production, properties and applications
Zhuang, X. Y., Chen, L., Komarneni, S., Zhou, C. H., Tong, D. S., Yang, H. M., Yu, W. H., & Wang, H. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.03.019 · Cited by 1,020
Bernal, S. A., Provis, J. L., Walkley, B., San Nicolas, R., Gehman, J. D., Brice, D. G., Kilcullen, A. R., Duxson, P., & van Deventer, J. S. J. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.06.007 · Cited by 1,019
Self-citationGeopolymers and other alkali activated materials: why, how, and what?
Provis, J. L. (2014) · Materials and Structures · doi:10.1617/s11527-013-0211-5 · Cited by 986
Duxson, P., Mallicoat, S. W., Lukey, G. C., Kriven, W. M., & van Deventer, J. S. J. (2007) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2006.05.044 · Cited by 907
Self-citationTechnical and commercial progress in the adoption of geopolymer cement
Van Deventer, J. S. J., Provis, J. L., & Duxson, P. (2012) · Minerals Engineering · doi:10.1016/j.mineng.2011.09.009 · Cited by 820
Self-citationHandbook of Alkali-Activated Cements, Mortars and Concretes
(2015) · Elsevier eBooks · doi:10.1016/c2013-0-16511-7 · Cited by 688
Designing Precursors for Geopolymer Cements
Duxson, P., & Provis, J. L. (2008) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02787.x · Cited by 662
Self-citationDurability of Alkali‐Activated Materials: Progress and Perspectives
Bernal, S. A., & Provis, J. L. (2014) · Journal of the American Ceramic Society · doi:10.1111/jace.12831 · Cited by 547
Walkley, B., San Nicolas, R., Sani, M.-A., Rees, G. J., Hanna, J. V., van Deventer, J. S. J., & Provis, J. L. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.08.010 · Cited by 544
Self-citationA review on alkaline activation: New analytical perspectives
Palomo, A., Krivenko, P., Garcia-Lodeiro, I., Kavalerova, E., Maltseva, O., & Fernández-Jiménez, A. (2014) · Materiales de Construcción · doi:10.3989/mc.2014.00314 · Cited by 501
Physical evolution of Na-geopolymer derived from metakaolin up to 1000 °C
Duxson, P., Lukey, G. C., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0535-4 · Cited by 500
Self-citation29Si NMR Study of Structural Ordering in Aluminosilicate Geopolymer Gels
Duxson, P., Provis, J. L., Lukey, G. C., Separovic, F., & van Deventer, J. S. J. (2005) · Langmuir · doi:10.1021/la047336x · Cited by 479
Self-citationEfflorescence control in geopolymer binders based on natural pozzolan
Najafi Kani, E., Allahverdi, A., & Provis, J. L. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2011.07.007 · Cited by 476
Mechanical properties of alkali-activated concrete: A state-of-the-art review
Ding, Y., Dai, J.-G., & Shi, C.-J. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.09.121 · Cited by 448
Geopolymerization process of alkali–metakaolinite characterized by isothermal calorimetry
Yao, X., Zhang, Z., Zhu, H., & Chen, Y. (2009) · Thermochimica Acta · doi:10.1016/j.tca.2009.04.002 · Cited by 439
Bernal, S. A., Rodríguez, E. D., Mejía de Gutiérrez, R., Gordillo, M., & Provis, J. L. (2011) · Journal of Materials Science · doi:10.1007/s10853-011-5490-z · Cited by 414
A review: Reaction mechanism and strength of slag and fly ash-based alkali-activated materials
Sun, B., Ye, G., & de Schutter, G. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.126843 · Cited by 386
Variation in hybrid cements over time. Alkaline activation of fly ash–portland cement blends
García-Lodeiro, I., Fernández-Jiménez, A., & Palomo, A. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.03.022 · Cited by 385
Influence of aggregate content on the behavior of fly ash based geopolymer concrete
Joseph, B., & Mathew, G. (2012) · Scientia Iranica · doi:10.1016/j.scient.2012.07.006 · Cited by 374
A physico-chemical basis for novel cementitious binders
Gartner, E. M., & Macphee, D. E. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.006 · Cited by 363
Solid-state nuclear magnetic resonance spectroscopy of cements
Walkley, B., & Provis, J. L. (2019) · Materials Today Advances · doi:10.1016/j.mtadv.2019.100007 · Cited by 361
Thermal evolution of metakaolin geopolymers: Part 1 – Physical evolution
Duxson, P., Lukey, G. C., & van Deventer, J. S. J. (2006) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2006.09.019 · Cited by 358
Self-citationPore solution composition and alkali diffusion in inorganic polymer cement
Lloyd, R. R., Provis, J. L., & van Deventer, J. S. J. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.04.008 · Cited by 355
Self-citationGeopolymer concrete as sustainable material: A state of the art review
Farooq, F., Jin, X., Faisal Javed, M., Akbar, A., Izhar Shah, M., Aslam, F., & Alyousef, R. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124762 · Cited by 344
A review on microstructural study and compressive strength of geopolymer mortar, paste and concrete
Ng, C., Alengaram, U. J., Wong, L. S., Mo, K. H., Jumaat, M. Z., & Ramesh, S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.07.075 · Cited by 343
Geopolymer for use in heavy metals adsorption, and advanced oxidative processes: A critical review
Rasaki, S. A., Bingxue, Z., Guarecuco, R., Thomas, T., & Minghui, Y. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.12.145 · Cited by 304
A state-of-the-art review of polymers used in soil stabilization
Huang, J., Kogbara, R. B., Hariharan, N., Masad, E. A., & Little, D. N. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124685 · Cited by 304
Effect of Calcium Additions on N–A–S–H Cementitious Gels
García‐Lodeiro, I., Fernández‐Jiménez, A., Palomo, A., & Macphee, D. E. (2010) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2010.03668.x · Cited by 304
Formation of Ceramics from Metakaolin‐Based Geopolymers. Part II: K‐Based Geopolymer
Bell, J. L., Driemeyer, P. E., & Kriven, W. M. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02922.x · Cited by 299
Ambient Temperature Drying Shrinkage and Cracking in Metakaolin‐Based Geopolymers
Kuenzel, C., Vandeperre, L. J., Donatello, S., Boccaccini, A. R., & Cheeseman, C. (2012) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2012.05380.x · Cited by 291
Nguyen, K. T., Ahn, N., Le, T. A., & Lee, K. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.12.033 · Cited by 262
Chloride-induced corrosion of steel rebars in simulated pore solutions of alkali-activated concretes
Mundra, S., Criado, M., Bernal, S. A., & Provis, J. L. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.08.006 · Cited by 254
Factors Affecting the Compressive Strength of Geopolymers: A Review
Castillo, H., Collado, H., Droguett, T., Sánchez, S., Vesely, M., Garrido, P., & Palma, S. (2021) · Minerals · doi:10.3390/min11121317 · Cited by 231
Alsafi, S., Farzadnia, N., Asadi, A., & Huat, B. K. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.01.079 · Cited by 85
Characterizations and quantitative estimation of alkali-activated binder paste from microstructures
Kar, A., Ray, I., Halabe, U. B., Unnikrishnan, A., & Dawson-Andoh, B. (2014) · International Journal of Concrete Structures and Materials · doi:10.1007/s40069-014-0069-0 · Cited by 34
Metadata
- Authors
- Duxson, P., Lukey, G. C., Separovic, F., & van Deventer, J. S. J.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-01-21
- Volume
- 44
- Issue
- 4
- Pages
- 832-839
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2012333171
- Cited by
- 470
- References
- 28
- FWCI
- 44.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.