The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Effect of Preparation Temperature on Cyclic CO2 Capture and Multiple Carbonation−Calcination Cycles for a New Ca-Based CO2 Sorbent
Abstract
The cyclic CO 2 capture, transient phases change, and microstructure appearance of a new kind of Ca-based regenerable CO 2 sorbent, CaO/Ca 12 Al 14 O 33, obtained by the integration of CaO as solid reactant with a composite metal oxide of Ca 12 Al 14 O 33 as a binder, were investigated by thermogravimetric analysis, XRD, and SEM at different preparation calcination temperatures. When the calcination temperature in the preparation stage is higher than 1000 °C, the cyclic CO 2 capture of this new sorbent declines. The lowered CO 2 capture may mainly be attributed to the formation of Ca 3 Al 2 O 6, which decreases the ratio of CaO to binder in sorbent, and the severe sintering of sorbent occurs when calcined at such high temperatures in the preparation processes. These results suggest that the calcination temperature for this new sorbent should not be higher than 1000 °C in order to obtain its high reactivity. The performance of the new sorbent over 50 cycles was evaluated under mild and severe regeneration conditions, respectively. CaO/Ca 12 Al 14 O 33 attained 41 wt % CO 2 capture after 50 carbonation−calcination cycles under mild calcination conditions (850 °C, 100% N 2 ), and the results obtained here indicate that the new sorbent, CaO/Ca 12 Al 14 O 33, has significantly improved CO 2 capture and cyclic reaction stability over multiple carbonation−calcination cycles compared with limestone and dolomite under mild calcination conditions. When more severe calcination conditions (980 °C, 100% CO 2 ) were used, the capture of CaO/Ca 12 Al 14 O 33 decreased from 52 wt % in the first cycle to about 22 wt % in the 56th cycle; however, the capture of CaO/Ca 12 Al 14 O 33 sorbent over 56 cycles is still higher than that of dolomite and limestone under the same severe calcination conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
White, C. M., Strazisar, B. R., Granite, E. J., Hoffman, J. S., & Pennline, H. W. (2003) · Journal of the Air & Waste Management Association · doi:10.1080/10473289.2003.10466206 · Cited by 751
Conversion Limits in the Reaction of CO2with Lime
Abanades, J. C., & Alvarez, D. (2003) · Energy & Fuels · doi:10.1021/ef020152a · Cited by 716
The maximum capture efficiency of CO2 using a carbonation/calcination cycle of CaO/CaCO3
Abánades, J. C. (2002) · Chemical Engineering Journal · doi:10.1016/s1385-8947(02)00126-2 · Cited by 517
The reversibility of the reaction CaCO3 ⇄ CaO+CO2
Barker, R. (1973) · Journal of Applied Chemistry and Biotechnology · doi:10.1002/jctb.5020231005 · Cited by 508
Hydrogen from methane in a single-step process
Balasubramanian, B., Lopez Ortiz, A., Kaytakoglu, S., & Harrison, D. P. (1999) · Chemical Engineering Science · doi:10.1016/s0009-2509(98)00425-4 · Cited by 380
Synthesis, Experimental Studies, and Analysis of a New Calcium-Based Carbon Dioxide Absorbent
Li, Z.-S., Cai, N.-S., Huang, Y.-Y., & Han, H.-J. (2005) · Energy & Fuels · doi:10.1021/ef0496799 · Cited by 372
Self-citationCalcium oxide sintering in atmospheres containing water and carbon dioxide
Borgwardt, R. H. (1989) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00088a019 · Cited by 339
Sorbent Cost and Performance in CO2 Capture Systems
Abanades, J. C., Rubin, E. S., & Anthony, E. J. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie049962v · Cited by 308
Hydrogen Production Using Sorption-Enhanced Reaction
Lopez Ortiz, A., & Harrison, D. P. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie001009c · Cited by 261
Kato, M., Yoshikawa, S., & Nakagawa, K. (2002) · Journal of Materials Science Letters · doi:10.1023/a:1015338808533 · Cited by 257
Mechanism of High-Temperature CO2 Sorption on Lithium Zirconate
Ida, J.-I., & Lin, Y. S. (2003) · Environmental Science & Technology · doi:10.1021/es0259032 · Cited by 245
Hughes, R. W., Lu, D., Anthony, E. J., & Wu, Y. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie034260b · Cited by 233
The reactivity of calcium oxide towards carbon dioxide and its use for energy storage
Barker, R. (1974) · Journal of Applied Chemistry and Biotechnology · doi:10.1002/jctb.2720240405 · Cited by 224
Simultaneous shift reaction and carbon dioxide separation for the direct production of hydrogen
Han, C., & Harrison, D. P. (1994) · Chemical Engineering Science · doi:10.1016/0009-2509(94)00266-5 · Cited by 219
Developing an innovative method, HyPr-RING, to produce hydrogen from hydrocarbons
Lin, S. Y., Suzuki, Y., Hatano, H., & Harada, M. (2002) · Energy Conversion and Management · doi:10.1016/s0196-8904(02)00014-6 · Cited by 185
Unmixed combustion: an alternative to fire
Lyon, R. K., & Cole, J. A. (2000) · Combustion and Flame · doi:10.1016/s0010-2180(99)00136-4 · Cited by 176
Lee, D. K., Baek, I. H., & Yoon, W. L. (2004) · Chemical Engineering Science · doi:10.1016/j.ces.2003.12.011 · Cited by 134
Low-Pressure Sorption-Enhanced Hydrogen Production
Yi, K. B., & Harrison, D. P. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie048883g · Cited by 127
Kinetic feasibility of a chemical heat pump for heat utilization of high-temperature processes
Kato, Y., Harada, N., & Yoshizawa, Y. (1999) · Applied Thermal Engineering · doi:10.1016/s1359-4311(98)00049-0 · Cited by 82
Cited by
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
A Review of CO2 Capture by Absorption and Adsorption
Yu, C.-H., Huang, C.-H., & Tan, C.-S. (2012) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2012.05.0132 · Cited by 1,730
“The modification of pore structure could be achieved by incorporation of Al into CaO to form mayonite (Ca 12 Al 14 O 33 ) (Li et al. , 2006 Lemonidou, 2008; Wu et al. , 2008).”
CO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
The calcium looping cycle for large-scale CO2 capture
Blamey, J., Anthony, E. J., Wang, J., & Fennell, P. S. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.10.001 · Cited by 1,044
Sorption-Enhanced Hydrogen Production: A Review
Harrison, D. P. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie800298z · Cited by 556
Metadata
- Authors
- Li, Z.-S., Cai, N.-S., & Huang, Y.-Y.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-02-21
- Volume
- 45
- Issue
- 6
- Pages
- 1911-1917
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2091359372
- Cited by
- 302
- References
- 19
- FWCI
- 24.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.