The DOI matches its Crossref record.
Synthesis of Magnesium Hydroxide and Oxide Nanoparticles Using a Spinning Disk Reactor
Abstract
The aim of this research was to synthesize magnesium hydroxide nanoparticles, which were further calcined to form magnesium oxide, using a spinning disk reactor. Magnesium hydroxide was prepared by continuously pumping two aqueous solutions of MgCl 2 and NaOH, respectively, into the chamber of the reactor, where a liquid−liquid reaction took place to form Mg(OH) 2 . The effects of various operating variables, including the rotation speed, reactant concentration, and liquid flow rate of the reactants, on the size of magnesium hydroxide nanoparticles were investigated. The particle size of magnesium hydroxide increased as the flow rate increased, but remained quite constant as the reactant concentration varied. As far as size and uniformity were concerned, the best lamellar magnesium hydroxide particles were 50−80 nm in length and 10 nm in thickness. The particle morphology and size of magnesium oxide calcined from produced magnesium hydroxide were also analyzed. Polyhedral nanoparticles of 30−70 nm magnesium oxide were obtained by calcinating lamellar hydroxide.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review on the classification, characterisation, synthesis of nanoparticles and their application
Anu Mary Ealia, S., & Saravanakumar, M. P. (2017) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/263/3/032019 · Cited by 1,050
Ijaz, I., Gilani, E., Nazir, A., & Bukhari, A. (2020) · Green Chemistry Letters and Reviews · doi:10.1080/17518253.2020.1802517 · Cited by 992
Khan, Y., Sadia, H., Ali Shah, S. Z., Khan, M. N., Shah, A. A., Ullah, N., Ullah, M. F., Bibi, H., Bafakeeh, O. T., Khedher, N. B., et al. (2022) · Catalysts · doi:10.3390/catal12111386 · Cited by 664
Organic and inorganic nanomaterials: fabrication, properties and applications
Alshammari, B. H., Lashin, M. M. A., Mahmood, M. A., Al-Mubaddel, F. S., Ilyas, N., Rahman, N., Sohail, M., Khan, A., Abdullaev, S. S., & Khan, R. (2023) · RSC Advances · doi:10.1039/d3ra01421e · Cited by 331
Cho, W.-S., Duffin, R., Thielbeer, F., Bradley, M., Megson, I. L., MacNee, W., Poland, C. A., Tran, C. L., & Donaldson, K. (2012) · Toxicological Sciences · doi:10.1093/toxsci/kfs006 · Cited by 295
Burlec, A. F., Corciova, A., Boev, M., Batir-Marin, D., Mircea, C., Cioanca, O., Danila, G., Danila, M., Bucur, A. F., & Hancianu, M. (2023) · Pharmaceuticals · doi:10.3390/ph16101410 · Cited by 295
Karthik, K., Dhanuskodi, S., Gobinath, C., Prabukumar, S., & Sivaramakrishnan, S. (2019) · Journal of Photochemistry and Photobiology B: Biology · doi:10.1016/j.jphotobiol.2018.11.001 · Cited by 258
Battaglia, G., Romano, S., Raponi, A., Marchisio, D., Ciofalo, M., Tamburini, A., Cipollina, A., & Micale, G. (2022) · Powder Technology · doi:10.1016/j.powtec.2021.117106 · Cited by 49
Shen, H., Liu, Y., & Song, B. (2016) · Journal of Chemical Engineering of Japan · doi:10.1252/jcej.15we093 · Cited by 14
Metadata
- Authors
- Tai, C. Y., Tai, C.-T., Chang, M.-H., & Liu, H.-S.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-07-21
- Volume
- 46
- Issue
- 17
- Pages
- 5536-5541
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2082928799
- Cited by
- 219
- References
- 0
- FWCI
- 1.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.