Cell Morphology and Improved Heat Resistance of Microcellular Poly(l-lactide) Foam via Introducing Stereocomplex Crystallites of PLA
The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Abstract
The preparation of poly( l -lactic acid) (PLLA) foam with well-defined cell structure and high heat resistance is critical to broaden its applications. In this study, the stereocomplex crystallites (SC) with higher melting point and heat stability were introduced into PLLA foam by melt blending the PLLA with different amounts of poly( d -lactic acid) (PDLA). The crystal structures of pure PLLA and PLLA/PDLA blends formed during the blending and molding process were compared. It was found that no obvious crystallization was detected in pure PLLA, while SC formed in PLLA/PDLA blends. Crystal structure and morphology evolution of PLLA and PLLA/PDLA during the CO 2 saturation and foaming process were investigated by combination of DSC, WAXD, FTIR, and SEM techniques. The results suggested SC had a higher melting peak, higher thermal stability, and smaller crystal domain size in relation to the homocrystal of PLLA, and it did not further develop with the CO 2 saturation and the foaming processes, while the CO 2 saturation induced the formation of the mesomorphic structure in PLLA and PLLA/PDLA blends. The mesomorphic structure transformed into the more stable α form in the following foaming process. The resultant PLLA/PDLA foam exhibited a significant and concurrent increase in cell density and cell structure uniformity relative to PLLA foam. The heat resistance measurement presented that thus-prepared PLLA/PDLA foams had better heat resistance than PLLA foam, which was attributed to the higher melting point, higher heat stability, and higher cell nucleation ability of SC in PLLA/PDLA foams.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Properties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461
Stereocomplex formation between enantiomeric poly(lactides)
Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409
Poly(lactic acid) fiber: An overview
Gupta, B., Revagade, N., & Hilborn, J. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.005 · Cited by 1,360
Effect of nucleation and plasticization on the crystallization of poly (lactic acid)
Li, H., & Huneault, M. A. (2007) · Polymer · doi:10.1016/j.polymer.2007.09.020 · Cited by 810
Crystallization Behavior and Morphology of Biodegradable Polylactide/Layered Silicate Nanocomposite
Nam, J. Y., Sinha Ray, S., & Okamoto, M. (2003) · Macromolecules · doi:10.1021/ma034623j · Cited by 429
Plasticization of Poly(l-lactide) with Poly(propylene glycol)
Kulinski, Z., Piorkowska, E., Gadzinowska, K., & Stasiak, M. (2006) · Biomacromolecules · doi:10.1021/bm060089m · Cited by 320
Helix Distortion and Crystal Structure of the α-Form of Poly(l-lactide)
Sasaki, S., & Asakura, T. (2003) · Macromolecules · doi:10.1021/ma0348674 · Cited by 296
Enthalpy Relaxation and Embrittlement of Poly( l -lactide) during Physical Aging
Pan, P., Zhu, B., & Inoue, Y. (2007) · Macromolecules · doi:10.1021/ma071737c · Cited by 282
Tailoring crystallization: towards high-performance poly(lactic acid)
Liu, G., Zhang, X., & Wang, D. (2014) · Advanced Materials · doi:10.1002/adma.201305413 · Cited by 249
Lavine, M. S., Waheed, N., & Rutledge, G. C. (2003) · Polymer · doi:10.1016/s0032-3861(03)00017-x · Cited by 219
Tsuji, H., & Tezuka, Y. (2004) · Biomacromolecules · doi:10.1021/bm049835i · Cited by 194
Hamley, I. W., Castelletto, V., Castillo, R. V., Müller, A. J., Martin, C. M., Pollet, E., & Dubois, P. (2005) · Macromolecules · doi:10.1021/ma0481499 · Cited by 160
Evidence of a dual network/spherulitic crystalline morphology in PLA stereocomplexes
Saeidlou, S., Huneault, M. A., Li, H., Sammut, P., & Park, C. B. (2012) · Polymer · doi:10.1016/j.polymer.2012.10.030 · Cited by 120
Cited by
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Poly(lactic acid) stereocomplexes: A decade of progress
Tsuji, H. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.017 · Cited by 535
Poly(lactic acid) stereocomplexes based molecular architectures: Synthesis and crystallization
Michell, R. M., Ladelta, V., Da Silva, E., Müller, A. J., & Hadjichristidis, N. (2023) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2023.101742 · Cited by 77
Metadata
- Authors
- Jia, P., Hu, J., Zhai, W., Duan, Y., Zhang, J., & Han, C.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-02-24
- Volume
- 54
- Issue
- 9
- Pages
- 2476-2488
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2329955430
- Cited by
- 63
- References
- 15
- FWCI
- 6.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.