The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Thermogravimetric Studies on the Kinetics of Rice Hull Pyrolysis and the Influence of Water Treatment
Abstract
Rice hulls were pyrolyzed in a thermogravimetric analyzer in a helium atmosphere to determine the kinetic parameters of devolatilization reactions. The pyrolysis experiments were conducted by heating rice hulls from room temperature to 1173 K at constant heating rates of 3,10, 30, 60, and 100 K/min. The global mass loss during rice hull pyrolysis was successfully simulated by a combination of four independent parallel reactions, the decompositions of four major components in rice hulls: moisture, hemicellulose, cellulose, and lignin. The activation energy for the decomposition of the nonmoisture components was in the order cellulose > hemicellulose > lignin. It was also found in the present study that the pyrolytic behaviors were significantly influenced by water wash prior to pyrolysis. The water wash elevates the peak temperature and the activation energy for the decomposition of each component of rice hulls. The volatile yields resulting from cellulose and hemicellulose decompositions during rice hull pyrolysis increase due to the water treatment, whereas those from lignin decomposition and the char yield decrease.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Product compositions and kinetics in the rapid pyrolysis of milled wood lignin
Nunn, T. R., Howard, J. B., Longwell, J. P., & Peters, W. A. (1985) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i200030a054 · Cited by 175
Cited by
Modeling chemical and physical processes of wood and biomass pyrolysis
DIBLASI, C. (2008) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2006.12.001 · Cited by 1,752
The Art, Science, and Technology of Charcoal Production
Antal, M. J., & Grønli, M. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0207919 · Cited by 1,623
Impact of pyrolysis temperature and manure source on physicochemical characteristics of biochar
Cantrell, K. B., Hunt, P. G., Uchimiya, M., Novak, J. M., & Ro, K. S. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2011.11.084 · Cited by 1,502
White, J. E., Catallo, W. J., & Legendre, B. L. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.01.004 · Cited by 1,232
Pyrolysis for Biochar Purposes: A Review to Establish Current Knowledge Gaps and Research Needs
Manyà, J. J. (2012) · Environmental Science & Technology · doi:10.1021/es301029g · Cited by 836
Influence of inorganic salts on the primary pyrolysis products of cellulose
Patwardhan, P. R., Satrio, J. A., Brown, R. C., & Shanks, B. H. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.01.112 · Cited by 799
Chemical Kinetics of Biomass Pyrolysis
Ranzi, E., Cuoci, A., Faravelli, T., Frassoldati, A., Migliavacca, G., Pierucci, S., & Sommariva, S. (2008) · Energy & Fuels · doi:10.1021/ef800551t · Cited by 757
Reaction mechanisms and multi-scale modelling of lignocellulosic biomass pyrolysis
Anca-Couce, A. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2015.10.002 · Cited by 664
Production of monomeric phenols by thermochemical conversion of biomass: a review
Amen-Chen, C., Pakdel, H., & Roy, C. (2001) · Bioresource Technology · doi:10.1016/s0960-8524(00)00180-2 · Cited by 655
Fast pyrolysis of rice husk: Product yields and compositions
TSAI, W., LEE, M., & CHANG, Y. (2007) · Bioresource Technology · doi:10.1016/j.biortech.2005.12.005 · Cited by 525
Lv, D., Xu, M., Liu, X., Zhan, Z., Li, Z., & Yao, H. (2010) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.09.014 · Cited by 479
Fahmi, R., Bridgwater, A. V., Darvell, L. I., Jones, J. M., Yates, N., Thain, S., & Donnison, I. S. (2007) · Fuel · doi:10.1016/j.fuel.2006.11.030 · Cited by 404
Popescu, M.-C., Popescu, C.-M., Lisa, G., & Sakata, Y. (2011) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2010.12.004 · Cited by 377
Teixeira Tarley, C. R., & Zezzi Arruda, M. A. (2004) · Chemosphere · doi:10.1016/j.chemosphere.2003.09.001 · Cited by 344
Lucian, M., Volpe, M., Gao, L., Piro, G., Goldfarb, J. L., & Fiori, L. (2018) · Fuel · doi:10.1016/j.fuel.2018.06.060 · Cited by 300
Kinetic analyses of biomass pyrolysis using the distributed activation energy model
SONOBE, T., & WORASUWANNARAK, N. (2008) · Fuel · doi:10.1016/j.fuel.2007.05.004 · Cited by 294
Kinetics of Biomass Pyrolysis: a Reformulated Three-Parallel-Reactions Model
Manyà, J. J., Velo, E., & Puigjaner, L. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020218p · Cited by 291
A distributed activation energy model for the pyrolysis of lignocellulosic biomass
Cai, J., Wu, W., Liu, R., & Huber, G. W. (2013) · Green Chemistry · doi:10.1039/c3gc36958g · Cited by 282
A novel biomass air gasification process for producing tar-free higher heating value fuel gas
Cao, Y., Wang, Y., Riley, J. T., & Pan, W.-P. (2006) · Fuel Processing Technology · doi:10.1016/j.fuproc.2005.10.003 · Cited by 278
How to determine consistent biomass pyrolysis kinetics in a parallel reaction scheme
Anca-Couce, A., Berger, A., & Zobel, N. (2014) · Fuel · doi:10.1016/j.fuel.2014.01.014 · Cited by 229
Catalytic effects of NaOH and Na2CO3 additives on alkali lignin pyrolysis and gasification
Guo, D.-L., Wu, S.-B., Liu, B., Yin, X.-L., & Yang, Q. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.01.042 · Cited by 155
Várhegyi, G., Grønli, M. G., & Di Blasi, C. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie034168f · Cited by 115
Miranda, R., Sosa, C., Bustos, D., Carrillo, E., & Rodrguez-Cant, M. (2012) · Lignocellulosic Precursors Used in the Synthesis of Activated Carbon - Characterization Techniques and Applications in the Wastewater Treatment · doi:10.5772/39368 · Cited by 12
Metadata
- Authors
- Teng, H., & Wei, Y.-C.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 1998-09-03
- Volume
- 37
- Issue
- 10
- Pages
- 3806-3811
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2022137536
- Cited by
- 158
- References
- 1
- FWCI
- 1.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.