The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Processing Additives for Improved Efficiency from Bulk Heterojunction Solar Cells
Abstract
Two criteria for processing additives introduced to control the morphology of bulk heterojunction (BHJ) materials for use in solar cells have been identified: (i) selective (differential) solubility of the fullerene component and (ii) higher boiling point than the host solvent. Using these criteria, we have investigated the class of 1,8-di(R)octanes with various functional groups (R) as processing additives for BHJ solar cells. Control of the BHJ morphology by selective solubility of the fullerene component is demonstrated using these high boiling point processing additives. The best results are obtained with R = Iodine (I). Using 1,8-diiodooctane as the processing additive, the efficiency of the BHJ solar cells was improved from 3.4% (for the reference device) to 5.1%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols
Peet, J., Kim, J. Y., Coates, N. E., Ma, W. L., Moses, D., Heeger, A. J., & Bazan, G. C. (2007) · Nature Materials · doi:10.1038/nmat1928 · Cited by 3,202
Self-citation2.5% efficient organic plastic solar cells
Shaheen, S. E., Brabec, C. J., Sariciftci, N. S., Padinger, F., Fromherz, T., & Hummelen, J. C. (2001) · Applied Physics Letters · doi:10.1063/1.1345834 · Cited by 2,613
Self-citationEffects of Postproduction Treatment on Plastic Solar Cells
Padinger, F., Rittberger, R. S., & Sariciftci, N. S. (2003) · Advanced Functional Materials · doi:10.1002/adfm.200390011 · Cited by 2,018
Morphology of polymer/fullerene bulk heterojunction solar cells
Hoppe, H., & Sariciftci, N. S. (2006) · J. Mater. Chem. · doi:10.1039/b510618b · Cited by 1,414
Nanoscale Morphology of Conjugated Polymer/Fullerene‐Based Bulk‐ Heterojunction Solar Cells
Hoppe, H., Niggemann, M., Winder, C., Kraut, J., Hiesgen, R., Hinsch, A., Meissner, D., & Sariciftci, N. S. (2004) · Advanced Functional Materials · doi:10.1002/adfm.200305026 · Cited by 735
Sivula, K., Ball, Z. T., Watanabe, N., & Fréchet, J. M. J. (2005) · Advanced Materials · doi:10.1002/adma.200501787 · Cited by 410
Method for increasing the photoconductive response in conjugated polymer/fullerene composites
Peet, J., Soci, C., Coffin, R. C., Nguyen, T., Mikhailovsky, A. A., Moses, D. J., & Bazan, G. C. (2006) · Applied Physics Letters · doi:10.1063/1.2408661 · Cited by 260
Self-citationSavenije, T. J., Kroeze, J. E., Yang, X., & Loos, J. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200400559 · Cited by 255
Camaioni, N., Ridolfi, G., Casalbore-Miceli, G., Possamai, G., & Maggini, M. (2002) · Advanced Materials · doi:10.1002/1521-4095(20021203)14:23<1735::aid-adma1735>3.0.co;2-o · Cited by 175
Cited by
Bulk heterojunction solar cells with internal quantum efficiency approaching 100%
Park, S. H., Roy, A., Beaupré, S., Cho, S., Coates, N., Moon, J. S., Moses, D., Leclerc, M., Lee, K., & Heeger, A. J. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.69 · Cited by 4,073
Self-citationFabrication and processing of polymer solar cells: A review of printing and coating techniques
Krebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.10.004 · Cited by 3,260
Recent Advances in Bulk Heterojunction Polymer Solar Cells
Lu, L., Zheng, T., Wu, Q., Schneider, A. M., Zhao, D., & Yu, L. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00098 · Cited by 2,550
Charge Photogeneration in Organic Solar Cells
Clarke, T. M., & Durrant, J. R. (2010) · Chemical Reviews · doi:10.1021/cr900271s · Cited by 2,372
Efficient organic solar cells processed from hydrocarbon solvents
Zhao, J., Li, Y., Yang, G., Jiang, K., Lin, H., Ade, H., Ma, W., & Yan, H. (2016) · Nature Energy · doi:10.1038/nenergy.2015.27 · Cited by 2,367
Self-citationπ-Conjugated Polymers for Organic Electronics and Photovoltaic Cell Applications
Facchetti, A. (2011) · Chemistry of Materials · doi:10.1021/cm102419z · Cited by 2,348
Fullerene‐Free Polymer Solar Cells with over 11% Efficiency and Excellent Thermal Stability
Zhao, W., Qian, D., Zhang, S., Li, S., Inganäs, O., Gao, F., & Hou, J. (2016) · Advanced Materials · doi:10.1002/adma.201600281 · Cited by 1,868
25th Anniversary Article: Bulk Heterojunction Solar Cells: Understanding the Mechanism of Operation
Heeger, A. J. (2014) · Advanced Materials · doi:10.1002/adma.201304373 · Cited by 1,723
Self-citationLiang, P., Liao, C., Chueh, C., Zuo, F., Williams, S. T., Xin, X., Lin, J., & Jen, A. K. ‐. (2014) · Advanced Materials · doi:10.1002/adma.201400231 · Cited by 1,452
Beaujuge, P. M., & Fréchet, J. M. J. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2073643 · Cited by 1,427
Bulk Heterojunction Solar Cells: Morphology and Performance Relationships
Huang, Y., Kramer, E. J., Heeger, A. J., & Bazan, G. C. (2014) · Chemical Reviews · doi:10.1021/cr400353v · Cited by 1,249
Self-citation25th Anniversary Article: A Decade of Organic/Polymeric Photovoltaic Research
Dou, L., You, J., Hong, Z., Xu, Z., Li, G., Street, R. A., & Yang, Y. (2013) · Advanced Materials · doi:10.1002/adma.201302563 · Cited by 1,151
Chu, T.-Y., Lu, J., Beaupré, S., Zhang, Y., Pouliot, J.-R., Wakim, S., Zhou, J., Leclerc, M., Li, Z., Ding, J., et al. (2011) · Journal of the American Chemical Society · doi:10.1021/ja200314m · Cited by 1,047
Development of New Semiconducting Polymers for High Performance Solar Cells
Liang, Y., Wu, Y., Feng, D., Tsai, S.-T., Son, H.-J., Li, G., & Yu, L. (2009) · Journal of the American Chemical Society · doi:10.1021/ja808373p · Cited by 930
Designing π-conjugated polymers for organic electronics
Guo, X., Baumgarten, M., & Müllen, K. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.09.005 · Cited by 836
Processable Low-Bandgap Polymers for Photovoltaic Applications
Boudreault, P.-L. T., Najari, A., & Leclerc, M. (2011) · Chemistry of Materials · doi:10.1021/cm1021855 · Cited by 827
Chueh, C.-C., Li, C.-Z., & Jen, A. K.-Y. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03824j · Cited by 799
Qian, D., Ye, L., Zhang, M., Liang, Y., Li, L., Huang, Y., Guo, X., Zhang, S., Tan, Z., & Hou, J. (2012) · Macromolecules · doi:10.1021/ma301900h · Cited by 782
The future of organic photovoltaics
Mazzio, K. A., & Luscombe, C. K. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00227j · Cited by 766
Organic Ternary Solar Cells: A Review
Ameri, T., Khoram, P., Min, J., & Brabec, C. J. (2013) · Advanced Materials · doi:10.1002/adma.201300623 · Cited by 766
Self-citationLiang, Y., & Yu, L. (2010) · Accounts of Chemical Research · doi:10.1021/ar1000296 · Cited by 697
Polymer donor–polymer acceptor (all-polymer) solar cells
Facchetti, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.04.005 · Cited by 688
Ternary blend polymer solar cells with enhanced power conversion efficiency
Lu, L., Xu, T., Chen, W., Landry, E. S., & Yu, L. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.172 · Cited by 664
Morphology Control in Organic Solar Cells
Zhao, F., Wang, C., & Zhan, X. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703147 · Cited by 630
Recent progress in organic solar cells (Part I material science)
Liu, Y., Liu, B., Ma, C.-Q., Huang, F., Feng, G., Chen, H., Hou, J., Yan, L., Wei, Q., Luo, Q., et al. (2022) · Science China Chemistry · doi:10.1007/s11426-021-1180-6 · Cited by 613
Self-citationCoffin, R. C., Peet, J., Rogers, J., & Bazan, G. C. (2009) · Nature Chemistry · doi:10.1038/nchem.403 · Cited by 597
Self-citationDang, M. T., Hirsch, L., Wantz, G., & Wuest, J. D. (2013) · Chemical Reviews · doi:10.1021/cr300005u · Cited by 587
Molecular helices as electron acceptors in high-performance bulk heterojunction solar cells
Zhong, Y., Trinh, M. T., Chen, R., Purdum, G. E., Khlyabich, P. P., Sezen, M., Oh, S., Zhu, H., Fowler, B., Zhang, B., et al. (2015) · Nature Communications · doi:10.1038/ncomms9242 · Cited by 573
Core-substituted naphthalenediimides
Sakai, N., Mareda, J., Vauthey, E., & Matile, S. (2010) · Chemical Communications · doi:10.1039/c0cc00078g · Cited by 566
Interface investigation and engineering – achieving high performance polymer photovoltaic devices
Chen, L.-M., Xu, Z., Hong, Z., & Yang, Y. (2010) · Journal of Materials Chemistry · doi:10.1039/b925382c · Cited by 565
Additives for morphology control in high-efficiency organic solar cells
Liao, H.-C., Ho, C.-C., Chang, C.-Y., Jao, M.-H., Darling, S. B., & Su, W.-F. (2013) · Materials Today · doi:10.1016/j.mattod.2013.08.013 · Cited by 535
Solvent Additives: Key Morphology‐Directing Agents for Solution‐Processed Organic Solar Cells
McDowell, C., Abdelsamie, M., Toney, M. F., & Bazan, G. C. (2018) · Advanced Materials · doi:10.1002/adma.201707114 · Cited by 513
Self-citationUnderstanding Low Bandgap Polymer PTB7 and Optimizing Polymer Solar Cells Based on It
Lu, L., & Yu, L. (2014) · Advanced Materials · doi:10.1002/adma.201400384 · Cited by 506
Yiu, A. T., Beaujuge, P. M., Lee, O. P., Woo, C. H., Toney, M. F., & Fréchet, J. M. J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja2089662 · Cited by 491
Bulk‐Heterojunction Organic Solar Cells: Five Core Technologies for Their Commercialization
Kang, H., Kim, G., Kim, J., Kwon, S., Kim, H., & Lee, K. (2016) · Advanced Materials · doi:10.1002/adma.201601197 · Cited by 489
Self-citationLee, W. J., Maiti, U. N., Lee, J. M., Lim, J., Han, T. H., & Kim, S. O. (2014) · Chemical Communications · doi:10.1039/c4cc00146j · Cited by 484
Self-citationThe role of buffer layers in polymer solar cells
Po, R., Carbonera, C., Bernardi, A., & Camaioni, N. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00273a · Cited by 480
Su, M., Kuo, C., Yuan, M., Jeng, U., Su, C., & Wei, K. (2011) · Advanced Materials · doi:10.1002/adma.201101274 · Cited by 473
The meniscus-guided deposition of semiconducting polymers
Gu, X., Shaw, L., Gu, K., Toney, M. F., & Bao, Z. (2018) · Nature Communications · doi:10.1038/s41467-018-02833-9 · Cited by 462
Lu, L., Chen, W., Xu, T., & Yu, L. (2015) · Nature Communications · doi:10.1038/ncomms8327 · Cited by 458
Steyrleuthner, R., Schubert, M., Howard, I., Klaumünzer, B., Schilling, K., Chen, Z., Saalfrank, P., Laquai, F., Facchetti, A., & Neher, D. (2012) · Journal of the American Chemical Society · doi:10.1021/ja306844f · Cited by 458
An Easily Synthesized Blue Polymer for High‐Performance Polymer Solar Cells
Wang, E., Hou, L., Wang, Z., Hellström, S., Zhang, F., Inganäs, O., & Andersson, M. R. (2010) · Advanced Materials · doi:10.1002/adma.201002225 · Cited by 458
Synthesis of Isoindigo-Based Oligothiophenes for Molecular Bulk Heterojunction Solar Cells
Mei, J., Graham, K. R., Stalder, R., & Reynolds, J. R. (2010) · Organic Letters · doi:10.1021/ol902512x · Cited by 457
Su, Y.-W., Lan, S.-C., & Wei, K.-H. (2012) · Materials Today · doi:10.1016/s1369-7021(13)70013-0 · Cited by 454
Hoven, C. V., Dang, X., Coffin, R. C., Peet, J., Nguyen, T., & Bazan, G. C. (2010) · Advanced Materials · doi:10.1002/adma.200903677 · Cited by 441
Self-citationNikolka, M., Nasrallah, I., Rose, B., Ravva, M. K., Broch, K., Sadhanala, A., Harkin, D., Charmet, J., Hurhangee, M., Brown, A., et al. (2017) · Nature Materials · doi:10.1038/nmat4785 · Cited by 440
Efficient Organic Solar Cells with Helical Perylene Diimide Electron Acceptors
Zhong, Y., Trinh, M. T., Chen, R., Wang, W., Khlyabich, P. P., Kumar, B., Xu, Q., Nam, C.-Y., Sfeir, M. Y., Black, C., et al. (2014) · Journal of the American Chemical Society · doi:10.1021/ja5092613 · Cited by 434
Zhang, M., Guo, X., Zhang, S., & Hou, J. (2014) · Advanced Materials · doi:10.1002/adma.201304427 · Cited by 425
Chen, W., Xu, T., He, F., Wang, W., Wang, C., Strzalka, J., Liu, Y., Wen, J., Miller, D. J., Chen, J., et al. (2011) · Nano Letters · doi:10.1021/nl201715q · Cited by 424
Zang, Y., Li, C., Chueh, C., Williams, S. T., Jiang, W., Wang, Z., Yu, J., & Jen, A. K. ‐. (2014) · Advanced Materials · doi:10.1002/adma.201401992 · Cited by 422
Li, W., Ye, L., Li, S., Yao, H., Ade, H., & Hou, J. (2018) · Advanced Materials · doi:10.1002/adma.201707170 · Cited by 422
Small is Powerful: Recent Progress in Solution‐Processed Small Molecule Solar Cells
Collins, S. D., Ran, N. A., Heiber, M. C., & Nguyen, T. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602242 · Cited by 414
A Planar Copolymer for High Efficiency Polymer Solar Cells
Qin, R., Li, W., Li, C., Du, C., Veit, C., Schleiermacher, H.-F., Andersson, M., Bo, Z., Liu, Z., Inganäs, O., et al. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9057986 · Cited by 412
Yao, Z., Liao, X., Gao, K., Lin, F., Xu, X., Shi, X., Zuo, L., Liu, F., Chen, Y., & Jen, A. K.-Y. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b13239 · Cited by 403
Zhao, J., Li, Y., Lin, H., Liu, Y., Jiang, K., Mu, C., Ma, T., Lin Lai, J. Y., Hu, H., Yu, D., et al. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02990a · Cited by 396
The Role of Processing in the Fabrication and Optimization of Plastic Solar Cells
Peet, J., Senatore, M. L., Heeger, A. J., & Bazan, G. C. (2009) · Advanced Materials · doi:10.1002/adma.200802559 · Cited by 391
Self-citationAlbrecht, S., Janietz, S., Schindler, W., Frisch, J., Kurpiers, J., Kniepert, J., Inal, S., Pingel, P., Fostiropoulos, K., Koch, N., et al. (2012) · Journal of the American Chemical Society · doi:10.1021/ja305039j · Cited by 374
Determining the optimum morphology in high-performance polymer-fullerene organic photovoltaic cells
Hedley, G. J., Ward, A. J., Alekseev, A., Howells, C. T., Martins, E. R., Serrano, L. A., Cooke, G., Ruseckas, A., & Samuel, I. D. W. (2013) · Nature Communications · doi:10.1038/ncomms3867 · Cited by 349
Chochos, C. L., & Choulis, S. A. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.04.003 · Cited by 340
Chen, H.-C., Chen, Y.-H., Liu, C.-C., Chien, Y.-C., Chou, S.-W., & Chou, P.-T. (2012) · Chemistry of Materials · doi:10.1021/cm302861s · Cited by 337
A real-time study of the benefits of co-solvents in polymer solar cell processing
van Franeker, J. J., Turbiez, M., Li, W., Wienk, M. M., & Janssen, R. A. J. (2015) · Nature Communications · doi:10.1038/ncomms7229 · Cited by 324
On the morphology of polymer‐based photovoltaics
Liu, F., Gu, Y., Jung, J. W., Jo, W. H., & Russell, T. P. (2012) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23063 · Cited by 323
Yan, J., & Saunders, B. R. (2014) · RSC Adv. · doi:10.1039/c4ra07064j · Cited by 320
Predicting Morphologies of Solution Processed Polymer:Fullerene Blends
Kouijzer, S., Michels, J. J., van den Berg, M., Gevaerts, V. S., Turbiez, M., Wienk, M. M., & Janssen, R. A. J. (2013) · Journal of the American Chemical Society · doi:10.1021/ja405493j · Cited by 316
Cao, B., Adutwum, L. A., Oliynyk, A. O., Luber, E. J., Olsen, B. C., Mar, A., & Buriak, J. M. (2018) · ACS Nano · doi:10.1021/acsnano.8b04726 · Cited by 316
Bay-linked perylene bisimides as promising non-fullerene acceptors for organic solar cells
Jiang, W., Ye, L., Li, X., Xiao, C., Tan, F., Zhao, W., Hou, J., & Wang, Z. (2014) · Chem. Commun. · doi:10.1039/c3cc47204c · Cited by 307
Recent progress in morphology control of supramolecular fullerene assemblies and its applications
Babu, S. S., Möhwald, H., & Nakanishi, T. (2010) · Chemical Society Reviews · doi:10.1039/c000680g · Cited by 305
Wan, Q., Guo, X., Wang, Z., Li, W., Guo, B., Ma, W., Zhang, M., & Li, Y. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602181 · Cited by 299
Self-citationLee, C., Kang, H., Lee, W., Kim, T., Kim, K., Woo, H. Y., Wang, C., & Kim, B. J. (2015) · Advanced Materials · doi:10.1002/adma.201405226 · Cited by 296
Huo, L., & Hou, J. (2011) · Polymer Chemistry · doi:10.1039/c1py00197c · Cited by 289
Photocrosslinkable Polythiophenes for Efficient, Thermally Stable, Organic Photovoltaics
Kim, B. J., Miyamoto, Y., Ma, B., & Fréchet, J. M. J. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200900043 · Cited by 276
Bian, L., Zhu, E., Tang, J., Tang, W., & Zhang, F. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.03.001 · Cited by 269
Characterization of the morphology of solution-processed bulk heterojunction organic photovoltaics
Liu, F., Gu, Y., Shen, X., Ferdous, S., Wang, H.-W., & Russell, T. P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.07.010 · Cited by 268
Multi‐Length‐Scale Morphologies Driven by Mixed Additives in Porphyrin‐Based Organic Photovoltaics
Gao, K., Miao, J., Xiao, L., Deng, W., Kan, Y., Liang, T., Wang, C., Huang, F., Peng, J., Cao, Y., et al. (2016) · Advanced Materials · doi:10.1002/adma.201505645 · Cited by 265
Morphology Control in Solution‐Processed Bulk‐Heterojunction Solar Cell Mixtures
Moulé, A. J., & Meerholz, K. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200900775 · Cited by 263
Qin, H., Li, L., Guo, F., Su, S., Peng, J., Cao, Y., & Peng, X. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43761b · Cited by 215
Li, L., Huang, Y., Peng, J., Cao, Y., & Peng, X. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00858k · Cited by 102
High-Efficiency Small Molecule-Based Bulk-Heterojunction Solar Cells Enhanced by Additive Annealing
Li, L., Xiao, L., Qin, H., Gao, K., Peng, J., Cao, Y., Liu, F., Russell, T. P., & Peng, X. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b06691 · Cited by 40
Liang, T., Xiao, L., Liu, C., Gao, K., Qin, H., Cao, Y., & Peng, X. (2016) · Organic Electronics · doi:10.1016/j.orgel.2015.11.035 · Cited by 38
Lyons, D. M., Kesters, J., Maes, W., Bielawski, C. W., & Sessler, J. L. (2013) · Synthetic Metals · doi:10.1016/j.synthmet.2013.06.013 · Cited by 35
Sharma, G. D., Zervaki, G. E., Angaridis, P., & Coutsolelos, A. G. (2014) · RSC Adv. · doi:10.1039/c4ra07770a · Cited by 13
Metadata
- Authors
- Lee, J. K., Ma, W. L., Brabec, C. J., Yuen, J., Moon, J. S., Kim, J. Y., Lee, K., Bazan, G. C., & Heeger, A. J.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-02-21
- Volume
- 130
- Issue
- 11
- Pages
- 3619-3623
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W1981296117
- Cited by
- 1,613
- References
- 9
- FWCI
- 92.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.