The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Solid–Solution-Based Metal Alloy Phase for Highly Reversible Lithium Metal Anode
Abstract
Lithium metal batteries are vital devices for high-energy-density energy storage, but the Li metal anode is highly reactive with electrolyte and forms uncontrolled dendrite that can cause undesirable parasitic reactions and, thus, poor cycling stability and raise safety concerns. Despite remarkable progress to partially solve these issues, the Li metal still plates at the electrode/electrolyte interface where the parasitic reactions and dendrite formation invariably occur. Here, we demonstrate the inward-growth plating of Li atoms into a metal foil of thickness of tens of micrometers while avoiding surface deposition, which is driven by the reversible solid–solution-based alloy phase change. Lithiation of the solid–solution alloy phase allows the freshly generated Li atoms at the surface to sink into the metal foil, while the reversible alloy phase change is companied by the dealloying reaction during delithiation, which extracts Li atoms from inside of the metal foil. The yielded dendrite free Li anode produces an enhanced Coulombic efficiency of 99.5 ± 0.2% with a reversible capacity of 1660 mA h g –1 (3.3 mA h cm –2 ).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
High-performance lithium battery anodes using silicon nanowires
Chan, C. K., Peng, H., Liu, G., McIlwrath, K., Zhang, X. F., Huggins, R. A., & Cui, Y. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.411 · Cited by 6,683
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Pathways for practical high-energy long-cycling lithium metal batteries
Liu, J., Bao, Z., Cui, Y., Dufek, E. J., Goodenough, J. B., Khalifah, P., Li, Q., Liaw, B. Y., Liu, P., Manthiram, A., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0338-x · Cited by 3,412
Alloy Negative Electrodes for Li-Ion Batteries
Obrovac, M. N., & Chevrier, V. L. (2014) · Chemical Reviews · doi:10.1021/cr500207g · Cited by 2,175
Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth
Yan, K., Lu, Z., Lee, H.-W., Xiong, F., Hsu, P.-C., Li, Y., Zhao, J., Chu, S., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.10 · Cited by 2,116
Albertus, P., Babinec, S., Litzelman, S., & Newman, A. (2017) · Nature Energy · doi:10.1038/s41560-017-0047-2 · Cited by 1,888
Lin, D., Liu, Y., Liang, Z., Lee, H.-W., Sun, J., Wang, H., Yan, K., Xie, J., & Cui, Y. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.32 · Cited by 1,798
Nanoscale Nucleation and Growth of Electrodeposited Lithium Metal
Pei, A., Zheng, G., Shi, F., Li, Y., & Cui, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04755 · Cited by 1,726
Yang, C.-P., Yin, Y.-X., Zhang, S.-F., Li, N.-W., & Guo, Y.-G. (2015) · Nature Communications · doi:10.1038/ncomms9058 · Cited by 1,589
Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries
Fan, X., Chen, L., Borodin, O., Ji, X., Chen, J., Hou, S., Deng, T., Zheng, J., Yang, C., Liou, S.-C., et al. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0183-2 · Cited by 1,371
High‐Voltage Lithium‐Metal Batteries Enabled by Localized High‐Concentration Electrolytes
Chen, S., Zheng, J., Mei, D., Han, K. S., Engelhard, M. H., Zhao, W., Xu, W., Liu, J., & Zhang, J. (2018) · Advanced Materials · doi:10.1002/adma.201706102 · Cited by 1,328
Zhang, R., Chen, X., Chen, X., Cheng, X., Zhang, X., Yan, C., & Zhang, Q. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201702099 · Cited by 1,225
A facile surface chemistry route to a stabilized lithium metal anode
Liang, X., Pang, Q., Kochetkov, I. R., Sempere, M. S., Huang, H., Sun, X., & Nazar, L. F. (2017) · Nature Energy · doi:10.1038/nenergy.2017.119 · Cited by 1,083
Chemical Dealloying Derived 3D Porous Current Collector for Li Metal Anodes
Yun, Q., He, Y., Lv, W., Zhao, Y., Li, B., Kang, F., & Yang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201601409 · Cited by 870
3D Porous Cu Current Collector/Li‐Metal Composite Anode for Stable Lithium‐Metal Batteries
Li, Q., Zhu, S., & Lu, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606422 · Cited by 854
Zhang, X., Chen, X., Cheng, X., Li, B., Shen, X., Yan, C., Huang, J., & Zhang, Q. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201801513 · Cited by 838
Non-flammable electrolytes with high salt-to-solvent ratios for Li-ion and Li-metal batteries
Zeng, Z., Murugesan, V., Han, K. S., Jiang, X., Cao, Y., Xiao, L., Ai, X., Yang, H., Zhang, J.-G., Sushko, M. L., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0196-y · Cited by 783
High-energy lithium metal pouch cells with limited anode swelling and long stable cycles
Niu, C., Lee, H., Chen, S., Li, Q., Du, J., Xu, W., Zhang, J.-G., Whittingham, M. S., Xiao, J., & Liu, J. (2019) · Nature Energy · doi:10.1038/s41560-019-0390-6 · Cited by 732
Zhang, R., Cheng, X., Zhao, C., Peng, H., Shi, J., Huang, J., Wang, J., Wei, F., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201504117 · Cited by 686
Self-citationFree-Standing Copper Nanowire Network Current Collector for Improving Lithium Anode Performance
Lu, L.-L., Ge, J., Yang, J.-N., Chen, S.-M., Yao, H.-B., Zhou, F., & Yu, S.-H. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b01581 · Cited by 678
Optimizing Areal Capacities through Understanding the Limitations of Lithium-Ion Electrodes
Gallagher, K. G., Trask, S. E., Bauer, C., Woehrle, T., Lux, S. F., Tschech, M., Lamp, P., Polzin, B. J., Ha, S., Long, B., et al. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0321602jes · Cited by 646
Self-smoothing anode for achieving high-energy lithium metal batteries under realistic conditions
Niu, C., Pan, H., Xu, W., Xiao, J., Zhang, J.-G., Luo, L., Wang, C., Mei, D., Meng, J., Wang, X., et al. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0427-9 · Cited by 589
Graphitized Carbon Fibers as Multifunctional 3D Current Collectors for High Areal Capacity Li Anodes
Zuo, T., Wu, X., Yang, C., Yin, Y., Ye, H., Li, N., & Guo, Y. (2017) · Advanced Materials · doi:10.1002/adma.201700389 · Cited by 579
Self-citationFast ion transport at solid–solid interfaces in hybrid battery anodes
Tu, Z., Choudhury, S., Zachman, M. J., Wei, S., Zhang, K., Kourkoutis, L. F., & Archer, L. A. (2018) · Nature Energy · doi:10.1038/s41560-018-0096-1 · Cited by 536
Critical Parameters for Evaluating Coin Cells and Pouch Cells of Rechargeable Li-Metal Batteries
Chen, S., Niu, C., Lee, H., Li, Q., Yu, L., Xu, W., Zhang, J.-G., Dufek, E. J., Whittingham, M. S., Meng, S., et al. (2019) · Joule · doi:10.1016/j.joule.2019.02.004 · Cited by 531
Ye, H., Xin, S., Yin, Y.-X., Li, J.-Y., Guo, Y.-G., & Wan, L.-J. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01763 · Cited by 451
Self-citationLangmuir–Blodgett artificial solid-electrolyte interphases for practical lithium metal batteries
Kim, M. S., Ryu, J.-H., Deepika, Lim, Y. R., Nah, I. W., Lee, K.-R., Archer, L. A., & Il Cho, W. (2018) · Nature Energy · doi:10.1038/s41560-018-0237-6 · Cited by 417
Lithium anode stable in air for low-cost fabrication of a dendrite-free lithium battery
Shen, X., Li, Y., Qian, T., Liu, J., Zhou, J., Yan, C., & Goodenough, J. B. (2019) · Nature Communications · doi:10.1038/s41467-019-08767-0 · Cited by 386
Electrochemical Alloying of Lithium in Organic Electrolytes
Dey, A. N. (1971) · Journal of The Electrochemical Society · doi:10.1149/1.2407783 · Cited by 385
Lithium insertion/extraction mechanism in alloy anodes for lithium-ion batteries
Zhang, W.-J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.08.114 · Cited by 366
Lin, D., Zhao, J., Sun, J., Yao, H., Liu, Y., Yan, K., & Cui, Y. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1619489114 · Cited by 299
Wu, S., Zhang, Z., Lan, M., Yang, S., Cheng, J., Cai, J., Shen, J., Zhu, Y., Zhang, K., & Zhang, W. (2018) · Advanced Materials · doi:10.1002/adma.201705830 · Cited by 288
A Concentrated Ternary‐Salts Electrolyte for High Reversible Li Metal Battery with Slight Excess Li
Qiu, F., Li, X., Deng, H., Wang, D., Mu, X., He, P., & Zhou, H. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803372 · Cited by 247
Robust Expandable Carbon Nanotube Scaffold for Ultrahigh‐Capacity Lithium‐Metal Anodes
Sun, Z., Jin, S., Jin, H., Du, Z., Zhu, Y., Cao, A., Ji, H., & Wan, L. (2018) · Advanced Materials · doi:10.1002/adma.201800884 · Cited by 214
Self-citationEngineering stable interfaces for three-dimensional lithium metal anodes
Xie, J., Wang, J., Lee, H. R., Yan, K., Li, Y., Shi, F., Huang, W., Pei, A., Chen, G., Subbaraman, R., et al. (2018) · Science Advances · doi:10.1126/sciadv.aat5168 · Cited by 190
Self-citationZhang, C., Liu, S., Li, G., Zhang, C., Liu, X., & Luo, J. (2018) · Advanced Materials · doi:10.1002/adma.201801328 · Cited by 189
Jin, S., Sun, Z., Guo, Y., Qi, Z., Guo, C., Kong, X., Zhu, Y., & Ji, H. (2017) · Advanced Materials · doi:10.1002/adma.201700783 · Cited by 172
Self-citationXie, J., Ye, J., Pan, F., Sun, X., Ni, K., Yuan, H., Wang, X., Shu, N., Chen, C. H., & Zhu, Y. (2018) · Advanced Materials · doi:10.1002/adma.201805654 · Cited by 123
Cited by
Duffner, F., Kronemeyer, N., Tübke, J., Leker, J., Winter, M., & Schmuch, R. (2021) · Nature Energy · doi:10.1038/s41560-020-00748-8 · Cited by 1,335
High‐Energy Lithium‐Ion Batteries: Recent Progress and a Promising Future in Applications
Xu, J., Cai, X., Cai, S., Shao, Y., Hu, C., Lu, S., & Ding, S. (2023) · ENERGY & ENVIRONMENTAL MATERIALS · doi:10.1002/eem2.12450 · Cited by 1,201
Zinc Anode for Mild Aqueous Zinc-Ion Batteries: Challenges, Strategies, and Perspectives
Yang, J., Yin, B., Sun, Y., Pan, H., Sun, W., Jia, B., Zhang, S., & Ma, T. (2022) · Nano-Micro Letters · doi:10.1007/s40820-021-00782-5 · Cited by 584
Designing electrolytes and interphases for high-energy lithium batteries
Wan, H., Xu, J., & Wang, C. (2023) · Nature Reviews Chemistry · doi:10.1038/s41570-023-00557-z · Cited by 472
Lithium‐Metal Batteries: From Fundamental Research to Industrialization
Kim, S., Park, G., Lee, S. J., Seo, S., Ryu, K., Kim, C. H., & Choi, J. W. (2023) · Advanced Materials · doi:10.1002/adma.202206625 · Cited by 416
Metadata
- Authors
- Jin, S., Ye, Y., Niu, Y., Xu, Y., Jin, H., Wang, J., Sun, Z., Cao, A., Wu, X., Luo, Y., Ji, H., & Wan, L.-J.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-04-20
- Volume
- 142
- Issue
- 19
- Pages
- 8818-8826
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W3017151063
- Cited by
- 391
- References
- 40
- FWCI
- 15.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.