The DOI matches its Crossref record; 64 of the 64 references it cites were found in a registry or an index.
Application of Consistency Criteria To Calculate BET Areas of Micro- And Mesoporous Metal–Organic Frameworks
Abstract
Metal-organic frameworks (MOFs) can exhibit exceptionally high surface areas, which are experimentally estimated by applying the BET theory to measured nitrogen isotherms. The Brunauer, Emmett, and Teller (BET)-estimated nitrogen monolayer loading is thus converted to a "BET area," but the meaning of MOF BET areas remains under debate. Recent emphasis has been placed on the usage of four so-called "BET consistency criteria." Using these criteria and simulated nitrogen isotherms for perfect crystals, we calculated BET areas for graphene and 25 MOFs having different pore-size distributions. BET areas were compared with their corresponding geometrically calculated, nitrogen-accessible surface areas (NASAs). Analysis of simulation snapshots elucidated the contributions of "pore-filling" and "monolayer-formation" to the nitrogen adsorption loadings in different MOF pores, revealing the origin of inaccuracies in BET-calculated monolayer loadings, which largely explain discrepancies between BET areas and NASAs. We also find that even if all consistency criteria are satisfied, the BET calculation can significantly overestimate the true monolayer loading, especially in MOFs combining mesopores (d ≥ 20 Å) and large micropores (d = 10-20 Å), due to the overlap of pore-filling and monolayer-formation regimes of these two kinds of pores. While it is not always possible to satisfy all consistency criteria, it is critical to minimize the deviation from these criteria during BET range selection to consistently compare BET areas of different MOFs and for comparing simulated and experimental BET areas of a given MOF. To accurately assess the quality of a MOF sample, it is best to compare experimental BET areas with simulated BET areas rather than with calculated NASAs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Thommes, M., Kaneko, K., Neimark, A. V., Olivier, J. P., Rodriguez-Reinoso, F., Rouquerol, J., & Sing, K. S. W. (2015) · Pure and Applied Chemistry · doi:10.1515/pac-2014-1117 · Cited by 21,202
UFF, a full periodic table force field for molecular mechanics and molecular dynamics simulations
Rappe, A. K., Casewit, C. J., Colwell, K. S., Goddard, W. A., & Skiff, W. M. (1992) · Journal of the American Chemical Society · doi:10.1021/ja00051a040 · Cited by 10,557
Eddaoudi, M., Kim, J., Rosi, N., Vodak, D., Wachter, J., O'Keeffe, M., & Yaghi, O. M. (2002) · Science · doi:10.1126/science.1067208 · Cited by 8,132
A New Zirconium Inorganic Building Brick Forming Metal Organic Frameworks with Exceptional Stability
Cavka, J. H., Jakobsen, S., Olsbye, U., Guillou, N., Lamberti, C., Bordiga, S., & Lillerud, K. P. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8057953 · Cited by 7,336
Metal–Organic Framework Materials as Chemical Sensors
Kreno, L. E., Leong, K., Farha, O. K., Allendorf, M., Van Duyne, R. P., & Hupp, J. T. (2012) · Chemical Reviews · doi:10.1021/cr200324t · Cited by 7,136
Self-citationCarbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
Metal–Organic Frameworks for Separations
Li, J.-R., Sculley, J., & Zhou, H.-C. (2012) · Chemical Reviews · doi:10.1021/cr200190s · Cited by 6,323
Stock, N., & Biswas, S. (2012) · Chemical Reviews · doi:10.1021/cr200304e · Cited by 5,045
Hydrogen Storage in Microporous Metal-Organic Frameworks
Rosi, N. L., Eckert, J., Eddaoudi, M., Vodak, D. T., Kim, J., O'Keeffe, M., & Yaghi, O. M. (2003) · Science · doi:10.1126/science.1083440 · Cited by 4,846
Cited by
Moghadam, P. Z., Li, A., Wiggin, S. B., Tao, A., Maloney, A. G. P., Wood, P. A., Ward, S. C., & Fairen-Jimenez, D. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00441 · Cited by 1,082
Self-citationBalancing volumetric and gravimetric uptake in highly porous materials for clean energy
Chen, Z., Li, P., Anderson, R., Wang, X., Zhang, X., Robison, L., Redfern, L. R., Moribe, S., Islamoglu, T., Gómez-Gualdrón, D. A., et al. (2020) · Science · doi:10.1126/science.aaz8881 · Cited by 763
Self-citationEvaluation of the BET Theory for the Characterization of Meso and Microporous MOFs
Ambroz, F., Macdonald, T. J., Martis, V., & Parkin, I. P. (2018) · Small Methods · doi:10.1002/smtd.201800173 · Cited by 748
Best Practices for the Synthesis, Activation, and Characterization of Metal–Organic Frameworks
Howarth, A. J., Peters, A. W., Vermeulen, N. A., Wang, T. C., Hupp, J. T., & Farha, O. K. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02626 · Cited by 746
Self-citationA historical overview of the activation and porosity of metal–organic frameworks
Zhang, X., Chen, Z., Liu, X., Hanna, S. L., Wang, X., Taheri-Ledari, R., Maleki, A., Li, P., & Farha, O. K. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00997k · Cited by 692
Self-citationLangmuir’s Theory of Adsorption: A Centennial Review
Swenson, H., & Stadie, N. P. (2019) · Langmuir · doi:10.1021/acs.langmuir.9b00154 · Cited by 646
Porous materials for hydrogen storage
Chen, Z., Kirlikovali, K. O., Idrees, K. B., Wasson, M. C., & Farha, O. K. (2022) · Chem · doi:10.1016/j.chempr.2022.01.012 · Cited by 543
Self-citationStructural disorder determines capacitance in nanoporous carbons
Liu, X., Lyu, D., Merlet, C., Leesmith, M. J. A., Hua, X., Xu, Z., Grey, C. P., & Forse, A. C. (2024) · Science · doi:10.1126/science.adn6242 · Cited by 425
Oveisi, M., Asli, M. A., & Mahmoodi, N. M. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.12.057 · Cited by 406
Balancing Mechanical Stability and Ultrahigh Porosity in Crystalline Framework Materials
Hönicke, I. M., Senkovska, I., Bon, V., Baburin, I. A., Bönisch, N., Raschke, S., Evans, J. D., & Kaskel, S. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201808240 · Cited by 391
Sinha, P., Datar, A., Jeong, C., Deng, X., Chung, Y. G., & Lin, L.-C. (2019) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.9b02116 · Cited by 360
Bottom-up construction of a superstructure in a porous uranium-organic crystal
Li, P., Vermeulen, N. A., Malliakas, C. D., Gómez-Gualdrón, D. A., Howarth, A. J., Mehdi, B. L., Dohnalkova, A., Browning, N. D., O’Keeffe, M., & Farha, O. K. (2017) · Science · doi:10.1126/science.aam7851 · Cited by 355
Self-citationMaterials Informatics with PoreBlazer v4.0 and the CSD MOF Database
Sarkisov, L., Bueno-Perez, R., Sutharson, M., & Fairen-Jimenez, D. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c03575 · Cited by 352
The Chemistry of Reticular Framework Nanoparticles: MOF, ZIF, and COF Materials
Ploetz, E., Engelke, H., Lächelt, U., & Wuttke, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909062 · Cited by 350
Chung, Y. G., Gómez-Gualdrón, D. A., Li, P., Leperi, K. T., Deria, P., Zhang, H., Vermeulen, N. A., Stoddart, J. F., You, F., Hupp, J. T., et al. (2016) · Science Advances · doi:10.1126/sciadv.1600909 · Cited by 321
Self-citationConnolly, B. M., Aragones-Anglada, M., Gandara-Loe, J., Danaf, N. A., Lamb, D. C., Mehta, J. P., Vulpe, D., Wuttke, S., Silvestre-Albero, J., Moghadam, P. Z., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-10185-1 · Cited by 315
Self-citationHow Reproducible are Surface Areas Calculated from the BET Equation?
Osterrieth, J. W. M., Rampersad, J., Madden, D., Rampal, N., Skoric, L., Connolly, B., Allendorf, M. D., Stavila, V., Snider, J. L., Ameloot, R., et al. (2022) · Advanced Materials · doi:10.1002/adma.202201502 · Cited by 315
Self-citationThe chemistry and applications of hafnium and cerium(iv) metal–organic frameworks
Hu, Z., Wang, Y., & Zhao, D. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00920b · Cited by 297
Fast and selective fluoride ion conduction in sub-1-nanometer metal-organic framework channels
Li, X., Zhang, H., Wang, P., Hou, J., Lu, J., Easton, C. D., Zhang, X., Hill, M. R., Thornton, A. W., Liu, J. Z., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-10420-9 · Cited by 279
Framework-Topology-Dependent Catalytic Activity of Zirconium-Based (Porphinato)zinc(II) MOFs
Deria, P., Gómez-Gualdrón, D. A., Hod, I., Snurr, R. Q., Hupp, J. T., & Farha, O. K. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b09113 · Cited by 273
Self-citationModeling Amorphous Microporous Polymers for CO2Capture and Separations
Kupgan, G., Abbott, L. J., Hart, K. E., & Colina, C. M. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00691 · Cited by 272
Nanosizing a Metal–Organic Framework Enzyme Carrier for Accelerating Nerve Agent Hydrolysis
Li, P., Moon, S.-Y., Guelta, M. A., Lin, L., Gómez-Gualdrón, D. A., Snurr, R. Q., Harvey, S. P., Hupp, J. T., & Farha, O. K. (2016) · ACS Nano · doi:10.1021/acsnano.6b04996 · Cited by 266
Self-citation
Metadata
- Authors
- Gómez-Gualdrón, D. A., Moghadam, P. Z., Hupp, J. T., Farha, O. K., & Snurr, R. Q.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-12-24
- Volume
- 138
- Issue
- 1
- Pages
- 215-224
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2215509697
- Cited by
- 297
- References
- 64
- FWCI
- 7.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.