The DOI matches its Crossref record; 64 of the 64 references it cites were found in a registry or an index.
Application of Consistency Criteria To Calculate BET Areas of Micro- And Mesoporous Metal–Organic Frameworks
Abstract
Metal-organic frameworks (MOFs) can exhibit exceptionally high surface areas, which are experimentally estimated by applying the BET theory to measured nitrogen isotherms. The Brunauer, Emmett, and Teller (BET)-estimated nitrogen monolayer loading is thus converted to a "BET area," but the meaning of MOF BET areas remains under debate. Recent emphasis has been placed on the usage of four so-called "BET consistency criteria." Using these criteria and simulated nitrogen isotherms for perfect crystals, we calculated BET areas for graphene and 25 MOFs having different pore-size distributions. BET areas were compared with their corresponding geometrically calculated, nitrogen-accessible surface areas (NASAs). Analysis of simulation snapshots elucidated the contributions of "pore-filling" and "monolayer-formation" to the nitrogen adsorption loadings in different MOF pores, revealing the origin of inaccuracies in BET-calculated monolayer loadings, which largely explain discrepancies between BET areas and NASAs. We also find that even if all consistency criteria are satisfied, the BET calculation can significantly overestimate the true monolayer loading, especially in MOFs combining mesopores (d ≥ 20 Å) and large micropores (d = 10-20 Å), due to the overlap of pore-filling and monolayer-formation regimes of these two kinds of pores. While it is not always possible to satisfy all consistency criteria, it is critical to minimize the deviation from these criteria during BET range selection to consistently compare BET areas of different MOFs and for comparing simulated and experimental BET areas of a given MOF. To accurately assess the quality of a MOF sample, it is best to compare experimental BET areas with simulated BET areas rather than with calculated NASAs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Thommes, M., Kaneko, K., Neimark, A. V., Olivier, J. P., Rodriguez-Reinoso, F., Rouquerol, J., & Sing, K. S. W. (2015) · Pure and Applied Chemistry · doi:10.1515/pac-2014-1117 · Cited by 21,202
UFF, a full periodic table force field for molecular mechanics and molecular dynamics simulations
Rappe, A. K., Casewit, C. J., Colwell, K. S., Goddard, W. A., & Skiff, W. M. (1992) · Journal of the American Chemical Society · doi:10.1021/ja00051a040 · Cited by 10,557
Eddaoudi, M., Kim, J., Rosi, N., Vodak, D., Wachter, J., O'Keeffe, M., & Yaghi, O. M. (2002) · Science · doi:10.1126/science.1067208 · Cited by 8,132
A New Zirconium Inorganic Building Brick Forming Metal Organic Frameworks with Exceptional Stability
Cavka, J. H., Jakobsen, S., Olsbye, U., Guillou, N., Lamberti, C., Bordiga, S., & Lillerud, K. P. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8057953 · Cited by 7,336
Metal–Organic Framework Materials as Chemical Sensors
Kreno, L. E., Leong, K., Farha, O. K., Allendorf, M., Van Duyne, R. P., & Hupp, J. T. (2012) · Chemical Reviews · doi:10.1021/cr200324t · Cited by 7,136
Self-citationCarbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
Metal–Organic Frameworks for Separations
Li, J.-R., Sculley, J., & Zhou, H.-C. (2012) · Chemical Reviews · doi:10.1021/cr200190s · Cited by 6,323
Stock, N., & Biswas, S. (2012) · Chemical Reviews · doi:10.1021/cr200304e · Cited by 5,045
Hydrogen Storage in Microporous Metal-Organic Frameworks
Rosi, N. L., Eckert, J., Eddaoudi, M., Vodak, D. T., Kim, J., O'Keeffe, M., & Yaghi, O. M. (2003) · Science · doi:10.1126/science.1083440 · Cited by 4,846
Ultrahigh Porosity in Metal-Organic Frameworks
Furukawa, H., Ko, N., Go, Y. B., Aratani, N., Choi, S. B., Choi, E., Yazaydin, A. Ö., Snurr, R. Q., O’Keeffe, M., Kim, J., et al. (2010) · Science · doi:10.1126/science.1192160 · Cited by 3,904
Self-citationApplications of metal–organic frameworks in heterogeneous supramolecular catalysis
Liu, J., Chen, L., Cui, H., Zhang, J., Zhang, L., & Su, C.-Y. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00094c · Cited by 2,894
A route to high surface area, porosity and inclusion of large molecules in crystals
Materials Design and Discovery Group, Chae, H. K., Siberio-Pérez, D. Y., Kim, J., Go, Y., Eddaoudi, M., Matzger, A. J., O'Keeffe, M., & Yaghi, O. M. (2004) · Nature · doi:10.1038/nature02311 · Cited by 2,816
Horike, S., Shimomura, S., & Kitagawa, S. (2009) · Nature Chemistry · doi:10.1038/nchem.444 · Cited by 2,486
Vapor–liquid equilibria of mixtures containing alkanes, carbon dioxide, and nitrogen
Potoff, J. J., & Siepmann, J. I. (2001) · AIChE Journal · doi:10.1002/aic.690470719 · Cited by 2,073
RASPA: molecular simulation software for adsorption and diffusion in flexible nanoporous materials
Dubbeldam, D., Calero, S., Ellis, D. E., & Snurr, R. Q. (2016) · Molecular Simulation · doi:10.1080/08927022.2015.1010082 · Cited by 1,967
Self-citationMetal–Organic Framework Materials with Ultrahigh Surface Areas: Is the Sky the Limit?
Farha, O. K., Eryazici, I., Jeong, N. C., Hauser, B. G., Wilmer, C. E., Sarjeant, A. A., Snurr, R. Q., Nguyen, S. T., Yazaydın, A. Ö., & Hupp, J. T. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3055639 · Cited by 1,958
Self-citationFarha, O. K., Özgür Yazaydın, A., Eryazici, I., Malliakas, C. D., Hauser, B. G., Kanatzidis, M. G., Nguyen, S. T., Snurr, R. Q., & Hupp, J. T. (2010) · Nature Chemistry · doi:10.1038/nchem.834 · Cited by 1,741
Self-citationLarge-scale screening of hypothetical metal–organic frameworks
Wilmer, C. E., Leaf, M., Lee, C. Y., Farha, O. K., Hauser, B. G., Hupp, J. T., & Snurr, R. Q. (2012) · Nature Chemistry · doi:10.1038/nchem.1192 · Cited by 1,439
Self-citationRational Design, Synthesis, Purification, and Activation of Metal−Organic Framework Materials
Farha, O. K., & Hupp, J. T. (2010) · Accounts of Chemical Research · doi:10.1021/ar1000617 · Cited by 1,426
Self-citationExceptional H2 Saturation Uptake in Microporous Metal−Organic Frameworks
Wong-Foy, A. G., Matzger, A. J., & Yaghi, O. M. (2006) · Journal of the American Chemical Society · doi:10.1021/ja058213h · Cited by 1,281
Getman, R. B., Bae, Y.-S., Wilmer, C. E., & Snurr, R. Q. (2012) · Chemical Reviews · doi:10.1021/cr200217c · Cited by 1,196
Self-citationTuning the Topology and Functionality of Metal−Organic Frameworks by Ligand Design
Zhao, D., Timmons, D. J., Yuan, D., & Zhou, H.-C. (2011) · Accounts of Chemical Research · doi:10.1021/ar100112y · Cited by 1,094
Walton, K. S., & Snurr, R. Q. (2007) · Journal of the American Chemical Society · doi:10.1021/ja071174k · Cited by 1,029
Self-citationMethane Storage in Metal–Organic Frameworks: Current Records, Surprise Findings, and Challenges
Peng, Y., Krungleviciute, V., Eryazici, I., Hupp, J. T., Farha, O. K., & Yildirim, T. (2013) · Journal of the American Chemical Society · doi:10.1021/ja4045289 · Cited by 1,018
Self-citationSynthesis, Structure, and Metalation of Two New Highly Porous Zirconium Metal–Organic Frameworks
Morris, W., Volosskiy, B., Demir, S., Gándara, F., McGrier, P. L., Furukawa, H., Cascio, D., Stoddart, J. F., & Yaghi, O. M. (2012) · Inorganic Chemistry · doi:10.1021/ic300825s · Cited by 906
Kim, J., Chen, B., Reineke, T. M., Li, H., Eddaoudi, M., Moler, D. B., O'Keeffe, M., & Yaghi, O. M. (2001) · Journal of the American Chemical Society · doi:10.1021/ja010825o · Cited by 832
Physical adsorption characterization of nanoporous materials: progress and challenges
Thommes, M., & Cychosz, K. A. (2014) · Adsorption · doi:10.1007/s10450-014-9606-z · Cited by 767
Chung, Y. G., Camp, J., Haranczyk, M., Sikora, B. J., Bury, W., Krungleviciute, V., Yildirim, T., Farha, O. K., Sholl, D. S., & Snurr, R. Q. (2014) · Chemistry of Materials · doi:10.1021/cm502594j · Cited by 743
Self-citationDesign of New Materials for Methane Storage
Düren, T., Sarkisov, L., Yaghi, O. M., & Snurr, R. Q. (2004) · Langmuir · doi:10.1021/la0355500 · Cited by 731
Self-citationThe Interaction of Water with MOF-5 Simulated by Molecular Dynamics
Greathouse, J. A., & Allendorf, M. D. (2006) · Journal of the American Chemical Society · doi:10.1021/ja063506b · Cited by 626
In silico screening of carbon-capture materials
Lin, L.-C., Berger, A. H., Martin, R. L., Kim, J., Swisher, J. A., Jariwala, K., Rycroft, C. H., Bhown, A. S., Deem, M. W., Haranczyk, M., et al. (2012) · Nature Materials · doi:10.1038/nmat3336 · Cited by 563
Calculating Geometric Surface Areas as a Characterization Tool for Metal−Organic Frameworks
Düren, T., Millange, F., Férey, G., Walton, K. S., & Snurr, R. Q. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp074723h · Cited by 556
Self-citationHydrogen and Methane Adsorption in Metal−Organic Frameworks: A High-Pressure Volumetric Study
Zhou, W., Wu, H., Hartman, M. R., & Yildirim, T. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp074889i · Cited by 497
Ultrahigh Surface Area Zirconium MOFs and Insights into the Applicability of the BET Theory
Wang, T. C., Bury, W., Gómez-Gualdrón, D. A., Vermeulen, N. A., Mondloch, J. E., Deria, P., Zhang, K., Moghadam, P. Z., Sarjeant, A. A., Snurr, R. Q., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/ja512973b · Cited by 425
Self-citationExceptionally high H2 storage by a metal–organic polyhedral framework
Yan, Y., Lin, X., Yang, S., Blake, A. J., Dailly, A., Champness, N. R., Hubberstey, P., & Schröder, M. (2009) · Chemical Communications · doi:10.1039/b900013e · Cited by 349
Molecular Simulation of Adsorption and Diffusion of Hydrogen in Metal−Organic Frameworks
Yang, Q., & Zhong, C. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp051903n · Cited by 344
Bae, Y.-S., Yazaydın, A. Ö., & Snurr, R. Q. (2010) · Langmuir · doi:10.1021/la100449z · Cited by 342
Self-citationZhao, D., Yuan, D., Sun, D., & Zhou, H.-C. (2009) · Journal of the American Chemical Society · doi:10.1021/ja901109t · Cited by 339
Activation of metal–organic framework materials
Mondloch, J. E., Karagiaridi, O., Farha, O. K., & Hupp, J. T. (2013) · CrystEngComm · doi:10.1039/c3ce41232f · Cited by 324
Self-citationFernandez, M., Boyd, P. G., Daff, T. D., Aghaji, M. Z., & Woo, T. K. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501331m · Cited by 296
Theoretical Limits of Hydrogen Storage in Metal–Organic Frameworks: Opportunities and Trade-Offs
Goldsmith, J., Wong-Foy, A. G., Cafarella, M. J., & Siegel, D. J. (2013) · Chemistry of Materials · doi:10.1021/cm401978e · Cited by 277
What Are the Best Materials To Separate a Xenon/Krypton Mixture?
Simon, C. M., Mercado, R., Schnell, S. K., Smit, B., & Haranczyk, M. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01475 · Cited by 275
A new metal–organic framework with ultra-high surface area
Grünker, R., Bon, V., Müller, P., et al. (2014) · Chemical Communications · doi:10.1039/c4cc00113c · Cited by 273
Chowdhury, P., Bikkina, C., Meister, D., Dreisbach, F., & Gumma, S. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.07.029 · Cited by 269
Prospects for nanoporous metal‐organic materials in advanced separations processes
Snurr, R. Q., Hupp, J. T., & Nguyen, S. T. (2004) · AIChE Journal · doi:10.1002/aic.10101 · Cited by 262
Self-citationMolecular simulation of separation of CO2 from flue gases in CU‐BTC metal‐organic framework
Yang, Q., Xue, C., Zhong, C., & Chen, J. (2007) · AIChE Journal · doi:10.1002/aic.11298 · Cited by 259
Gomez-Gualdron, D. A., Gutov, O. V., Krungleviciute, V., Borah, B., Mondloch, J. E., Hupp, J. T., Yildirim, T., Farha, O. K., & Snurr, R. Q. (2014) · Chemistry of Materials · doi:10.1021/cm502304e · Cited by 231
Self-citationFernandez, M., Woo, T. K., Wilmer, C. E., & Snurr, R. Q. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp4006422 · Cited by 231
Self-citationDesign Requirements for Metal-Organic Frameworks as Hydrogen Storage Materials
Frost, H., & Snurr, R. Q. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp076657p · Cited by 214
Self-citationHaldoupis, E., Nair, S., & Sholl, D. S. (2012) · Journal of the American Chemical Society · doi:10.1021/ja2108239 · Cited by 211
Gutov, O. V., Bury, W., Gomez‐Gualdron, D. A., Krungleviciute, V., Fairen‐Jimenez, D., Mondloch, J. E., Sarjeant, A. A., Al‐Juaid, S. S., Snurr, R. Q., Hupp, J. T., et al. (2014) · Chemistry – A European Journal · doi:10.1002/chem.201402895 · Cited by 181
Self-citationAdsorptive characterization of porous solids: Error analysis guides the way
De Lange, M. F., Vlugt, T. J. H., Gascon, J., & Kapteijn, F. (2014) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2014.08.048 · Cited by 172
Ultrahigh porosity in mesoporous MOFs: promises and limitations
Senkovska, I., & Kaskel, S. (2014) · Chemical Communications · doi:10.1039/c4cc00524d · Cited by 166
Carbohydrate-Mediated Purification of Petrochemicals
Holcroft, J. M., Hartlieb, K. J., Moghadam, P. Z., Bell, J. G., Barın, G., Ferris, D. P., Bloch, E. D., Algaradah, M. M., Nassar, M. S., Botros, Y. Y., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/ja511878b · Cited by 148
Self-citationPeng, Y., Gadipelli, S., Wilmer, C. E., Eryazici, I., Snurr, R. Q., Hupp, J. T., Yildirim, T., & Farha, O. K. (2013) · Chemical Communications · doi:10.1039/c3cc40819a · Cited by 146
Self-citationLadavos, A. K., Katsoulidis, A. P., Iosifidis, A., Triantafyllidis, K. S., Pinnavaia, T. J., & Pomonis, P. J. (2011) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2011.11.005 · Cited by 145
Exploring the Limits of Methane Storage and Delivery in Nanoporous Materials
Gómez‐Gualdrón, D. A., Wilmer, C. E., Farha, O. K., Hupp, J. T., & Snurr, R. Q. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp502359q · Cited by 132
Self-citationWu, D., Yang, Q., Zhong, C., Liu, D., Huang, H., Zhang, W., & Maurin, G. (2012) · Langmuir · doi:10.1021/la302223m · Cited by 131
Yamagiwa, H., Sato, S., Fukawa, T., Ikehara, T., Maeda, R., Mihara, T., & Kimura, M. (2014) · Scientific Reports · doi:10.1038/srep06247 · Cited by 126
Understanding gas separation in metal–organic frameworks using computer modeling
Liu, D., & Zhong, C. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01045f · Cited by 85
BET specific surface area and pore structure of MOFs determined by hydrogen adsorption at 20 K
Streppel, B., & Hirscher, M. (2010) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp01873b · Cited by 48
Kolotilov, S. V., & Pavlishchuk, V. V. (2009) · Theoretical and Experimental Chemistry · doi:10.1007/s11237-009-9068-7 · Cited by 26
Adsorption by Metal-Organic Frameworks
Llewellyn, P. L., Maurin, G., & Rouquérol, J. (2013) · Elsevier eBooks · doi:10.1016/b978-0-08-097035-6.00014-0 · Cited by 25
Cited by
Moghadam, P. Z., Li, A., Wiggin, S. B., Tao, A., Maloney, A. G. P., Wood, P. A., Ward, S. C., & Fairen-Jimenez, D. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00441 · Cited by 1,082
Self-citationBalancing volumetric and gravimetric uptake in highly porous materials for clean energy
Chen, Z., Li, P., Anderson, R., Wang, X., Zhang, X., Robison, L., Redfern, L. R., Moribe, S., Islamoglu, T., Gómez-Gualdrón, D. A., et al. (2020) · Science · doi:10.1126/science.aaz8881 · Cited by 763
Self-citationBest Practices for the Synthesis, Activation, and Characterization of Metal–Organic Frameworks
Howarth, A. J., Peters, A. W., Vermeulen, N. A., Wang, T. C., Hupp, J. T., & Farha, O. K. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02626 · Cited by 746
Self-citationA historical overview of the activation and porosity of metal–organic frameworks
Zhang, X., Chen, Z., Liu, X., Hanna, S. L., Wang, X., Taheri-Ledari, R., Maleki, A., Li, P., & Farha, O. K. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00997k · Cited by 692
Self-citationLangmuir’s Theory of Adsorption: A Centennial Review
Swenson, H., & Stadie, N. P. (2019) · Langmuir · doi:10.1021/acs.langmuir.9b00154 · Cited by 646
Metadata
- Authors
- Gómez-Gualdrón, D. A., Moghadam, P. Z., Hupp, J. T., Farha, O. K., & Snurr, R. Q.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-12-24
- Volume
- 138
- Issue
- 1
- Pages
- 215-224
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2215509697
- Cited by
- 297
- References
- 64
- FWCI
- 7.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.